What is the maximum size of data that the application layer can pass on to the TCP layer below? a. Any size b. 216 bytes - size of TCP header c. 216 bytes d. 1500

What is the maximum size of data that the
application layer can pass on to the TCP
layer below?
a. Any size
b. 216 bytes - size of TCP header
c. 216 bytes
d. 1500
by

1 Answer

Answer :

a. Any size
by

Related questions

The maximum size of the data that the application layer can pass on to the TCP layer below is ......... (1) 216 bytes (2) 216 bytes + TCP header length (3) 216 bytes - TCP header length (4) 215 bytes

Description : The maximum size of the data that the application layer can pass on to the TCP layer below is ......... (1) 216 bytes (2) 216 bytes + TCP header length (3) 216 bytes - TCP header length (4) 215 bytes

Last Answer : Answer: Marks to all

An IP datagram of size 1000 bytes arrives at a router. The router has to forward this packet on a link whose MTU (maximum transmission unit) is 100 bytes. Assume that the size of the IP header is 20 bytes. The number of fragments that the IP datagram will be divided into for transmission is : a. 10 b. 50 c. 12 d. 13

Description : An IP datagram of size 1000 bytes arrives at a router. The router has to forward this packet on a link whose MTU (maximum transmission unit) is 100 bytes. Assume that the size of the IP header is 20 bytes ... the IP datagram will be divided into for transmission is : a. 10 b. 50 c. 12 d. 13

Last Answer : d. 13

Header of a Layer two frame usually contain ______________ A. synchronization bytes B. addresses C. frame identifier D. all of the mentioned

Description : Header of a Layer two frame usually contain ______________ A. synchronization bytes B. addresses C. frame identifier D. all of the mentioned

Last Answer : D. all of the mentioned

The IPv4 header size _______ A. is 20 to 60 bytes long B. is always 20 bytes long C. is always 60 bytes long D. depends on the MTU

Description : The IPv4 header size _______ A. is 20 to 60 bytes long B. is always 20 bytes long C. is always 60 bytes long D. depends on the MTU

Last Answer : A. is 20 to 60 bytes long

In IPv4, what is the value of the total length field in bytes if the header is 28 bytes and the data field is 400bytes? A) 428 B) 407 C) 107 D) 427

Description : In IPv4, what is the value of the total length field in bytes if the header is 28 bytes and the data field is 400bytes? A) 428 B) 407 C) 107 D) 427

Last Answer : 428

Which of the following is not a field in TCP header? a. Sequence number b. Fragment offset c. Checksum d. Window size

Description : Which of the following is not a field in TCP header? a. Sequence number b. Fragment offset c. Checksum d. Window size

Last Answer : b. Fragment offset

A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of an acknowledgement is 100 bytes and the transmission rate at the receiver is 8 Kbps. The one-way propagation delay is 100 milliseconds. Assuming no frame is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Last Answer : a. 2500

The maximum frame length for 10-Mbps Ethernet is ________ bytes. A) 1518 B) 1500 C) 1200 D) none of the abov

Description : The maximum frame length for 10-Mbps Ethernet is ________ bytes. A) 1518 B) 1500 C) 1200 D) none of the abov

Last Answer : 1518

In TCP IP Model, when data is sent from device A to device B, the 5th layer to receive data at B is ____________ a.Application layer b.Transport layer c.Link layer d.Session layer

Description : In TCP IP Model, when data is sent from device A to device B, the 5th layer to receive data at B is ____________ a.Application layer b.Transport layer c.Link layer d.Session layer

Last Answer : a.Application layer

The TCP/IP _______ layer is equivalent to the combined session, presentation, and application layers of the OSI model. a.data link b.network c.physical d.application

Description : The TCP/IP _______ layer is equivalent to the combined session, presentation, and application layers of the OSI model. a.data link b.network c.physical d.application

Last Answer : d.application

.In TCP IP Model, when data is sent from device A to device B, the 5th layer to receive data at B is ____________ a. Application layer b. Transport layer c. Link layer d. Session layer

Description : .In TCP IP Model, when data is sent from device A to device B, the 5th layer to receive data at B is ____________ a. Application layer b. Transport layer c. Link layer d. Session layer

Last Answer : a. Application layer

In IPv4 header, an HLEN value of decimal 10 means_______. A) there are 10bytes ofoptions B) there are 40bytes ofoptions C) there are 10bytes inthe header D) thereare 40 bytes in the header

Description : In IPv4 header, an HLEN value of decimal 10 means_______. A) there are 10bytes ofoptions B) there are 40bytes ofoptions C) there are 10bytes inthe header D) thereare 40 bytes in the header

Last Answer : thereare 40 bytes in the header

Header of a frame generally contains a. synchronization bytes b. addresses c. frame identifier d. all of the mentioned

Description : Header of a frame generally contains a. synchronization bytes b. addresses c. frame identifier d. all of the mentioned

Last Answer : d. all of the mentioned

In IPv4 header, an HLEN value of decimal 10 means _______ A. there are 10 bytes of options B. there are 40 bytes of optionsC. there are 10 bytes in the header D. there are 40 bytes in the header

Description : In IPv4 header, an HLEN value of decimal 10 means _______ A. there are 10 bytes of options B. there are 40 bytes of options C. there are 10 bytes in the header D. there are 40 bytes in the header

Last Answer : D. there are 40 bytes in the header

In the TCP/IP protocol suite, which one of the following is NOT part of the IP header? a. Fragment Offset b. Source IP address c. Destination IP address d. Destination port number

Description : In the TCP/IP protocol suite, which one of the following is NOT part of the IP header? a. Fragment Offset b. Source IP address c. Destination IP address d. Destination port number

Last Answer : d. Destination port number

An ACK number of 1000 in TCP always means that a. 999 bytes have been successfully received b. 1000 bytes have been successfully received c. 1001 bytes have been successfully received d. None of the above

Description : An ACK number of 1000 in TCP always means that a. 999 bytes have been successfully received b. 1000 bytes have been successfully received c. 1001 bytes have been successfully received d. None of the above

Last Answer : d. None of the above

Which of the following is not the layer of TCP/IP protocol? a. Application Layer b. Session Layer c. Transport Layer d. Internetwork layer

Description : Which of the following is not the layer of TCP/IP protocol? a. Application Layer b. Session Layer c. Transport Layer d. Internetwork layer

Last Answer : b. Session Layer

Which of the following OSI layers correspond to TCP/IP's application layer? A) Application B) IP Address C) Session D) All of the above

Description : Which of the following OSI layers correspond to TCP/IP's application layer? A) Application B) IP Address C) Session D) All of the above

Last Answer : D) All of the above

TCP/IP layer corresponds to the OSI models to three layers. A) Application B) Presentation C) Session D) Transport

Description : TCP/IP layer corresponds to the OSI models to three layers. A) Application B) Presentation C) Session D) Transport

Last Answer : A) Application

Which of the following is/are example(s) of stateful application layer protocols? (i) HTTP (ii) FTP (iii) TCP (iv) POP3 a. (i) and (ii) only b. (ii) and (iii) only c. (ii) and (iv) only d. (iv) only

Description : Which of the following is/are example(s) of stateful application layer protocols? (i) HTTP (ii) FTP (iii) TCP (iv) POP3 a. (i) and (ii) only b. (ii) and (iii) only c. (ii) and (iv) only d. (iv) only

Last Answer : c. (ii) and (iv) only

The TCP/IP …………corresponds to the combined session, presentation, and application layers of the OSI model. a.session layer b.presentation layer c.application layer d.None of the above

Description : The TCP/IP …………corresponds to the combined session, presentation, and application layers of the OSI model. a.session layer b.presentation layer c.application layer d.None of the above

Last Answer : c.application layer

Which of the following layers is an addition to OSI model when compared with TCP IP model? a. Application layer b. Presentation layer c. Session layer d. Session and Presentation layer

Description : Which of the following layers is an addition to OSI model when compared with TCP IP model? a. Application layer b. Presentation layer c. Session layer d. Session and Presentation layer

Last Answer : d. Session and Presentation layer

Which of the following layers is an addition to OSI model when compared with TCP IP model? a. Application layer b. Presentation layer c. Session layer d. Session and Presentation layer

Description : Which of the following layers is an addition to OSI model when compared with TCP IP model? a. Application layer b. Presentation layer c. Session layer d. Session and Presentation layer

Last Answer : d. Session and Presentation layer

Which is the additional layer to OSI model when compared with TCP IP model? a. Application layer b. Presentation layer c. Session layer d. Session and Presentation layer

Description : Which is the additional layer to OSI model when compared with TCP IP model? a. Application layer b. Presentation layer c. Session layer d. Session and Presentation layer

Last Answer : d. Session and Presentation layer

When displaying a web page, the application layer uses the _____________A. HTTP protocol B. FTP protocol C. SMTP protocol D. TCP protocol

Description : When displaying a web page, the application layer uses the _____________ A. HTTP protocol B. FTP protocol C. SMTP protocol D. TCP protocol

Last Answer : A. HTTP protocol

TCP/IP layer is equivalent to combined Session, Presentation and a. Transport layer b. Network layer c. Application layer d. Physical layer

Description : TCP/IP layer is equivalent to combined Session, Presentation and a. Transport layer b. Network layer c. Application layer d. Physical layer

Last Answer : c. Application layer

What layer in the TCP/IP stack is equivalent to the Transport layer of the OSI model? a. Internet b. Host to host c. Network Access d. Application

Description : What layer in the TCP/IP stack is equivalent to the Transport layer of the OSI model? a. Internet b. Host to host c. Network Access d. Application

Last Answer : b. Host to host

In IPv6,options are inserted between the _________and the ___________ data. A) baseheader;extensionheader B) baseheader;upper-layer data C) base header; frame header D) noneof the abov

Description : In IPv6,options are inserted between the _________and the ___________ data. A) baseheader;extensionheader B) baseheader;upper-layer data C) base header; frame header D) noneof the abov

Last Answer : baseheader;upper-layer data

Which of the following is anecessary part of the IPv6 datagram? A) Base header B) Extension header C) Data packet from the upper layer D) (a) and (c)

Description : Which of the following is anecessary part of the IPv6 datagram? A) Base header B) Extension header C) Data packet from the upper layer D) (a) and (c)

Last Answer : Base header

In IPv6, options are inserted between the _________ and the ___________ data A. base header; extension header B. base header; upper-layer data C. base header; frame header D. none of the above

Description : In IPv6, options are inserted between the _________ and the ___________ data A. base header; extension header B. base header; upper-layer data C. base header; frame header D. none of the above

Last Answer : B. base header; upper-layer data

The network layer is concerned with __________ of data. a. bits b. frames c. packets d. bytes

Description : The network layer is concerned with __________ of data. a. bits b. frames c. packets d. bytes

Last Answer : c. packets

The network layer encapsulates the data into _______of data. A. bits B. frames C. packets D. bytes

Description : The network layer encapsulates the data into _______of data. A. bits B. frames C. packets D. bytes

Last Answer : C. packets

The network layer is concerned with __________ of data. a) bits b) frames c) packets d) bytes

Description : The network layer is concerned with __________ of data. a) bits b) frames c) packets d) bytes

Last Answer : c) packets

The data unit in the TCP/IP layer called a ..... A) Message B) Segment C) Datagram D) Frame

Description : The data unit in the TCP/IP layer called a ..... A) Message B) Segment C) Datagram D) Frame

Last Answer : D) Frame

In the TCP/IP protocol architecture, the Network Access Layer includes ………………………………...layers of the OSI Reference Model. A. presentation, session, applicationB. physical, data link, network C. data link, network D. physical, data link

Description : In the TCP/IP protocol architecture, the Network Access Layer includes ………………………………...layers of the OSI Reference Model. A. presentation, session, application B. physical, data link, network C. data link, network D. physical, data link

Last Answer : B. physical, data link, network

Choose the correct layer numbers and names of the OSI model below. a. Layer 3 - Network Layer, Layer 2 - Data Link Layer, Layer 1 - Physical Layer b. Layer 7 - Application Layer, Layer 6 - Presentation Layer c. Layer 5 - Session Layer, Layer 4 - Transport Layerd. All given options

Description : Choose the correct layer numbers and names of the OSI model below. a. Layer 3 - Network Layer, Layer 2 - Data Link Layer, Layer 1 - Physical Layer b. Layer 7 - Application Layer, Layer 6 - Presentation Layer c. Layer 5 - Session Layer, Layer 4 - Transport Layer d. All given options

Last Answer : d. All given options

Which application-level protocol plays a crucial role in carrying out the data definition and manipulation in addition to X-500 features? a. TCP b. LDAP c. FTP d. None of the above

Description : Which application-level protocol plays a crucial role in carrying out the data definition and manipulation in addition to X-500 features? a. TCP b. LDAP c. FTP d. None of the above

Last Answer : b. LDAP

In a packet switching network, if the message size is 48 bytes and each packet contains a header of 3 bytes. If 24 packets are required to transmit the message, the packet size is ................ (1) 2 bytes (2) 1 byte (3) 4 bytes (4) 5 bytes

Description : In a packet switching network, if the message size is 48 bytes and each packet contains a header of 3 bytes. If 24 packets are required to transmit the message, the packet size is ................ (1) 2 bytes (2) 1 byte (3) 4 bytes (4) 5 bytes

Last Answer : (4) 5 bytes 

Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Description : Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Last Answer : d. 20000

In IPv4, what is the value of the total length field in bytes if the header is 28 bytes and the data field is 400 bytes?

Description : In IPv4, what is the value of the total length field in bytes if the header is 28 bytes and the data field is 400 bytes?

Last Answer : 428

Which one of the following allows a user at one site to establish a connection to another site and then pass keystrokes from local host to remote host? a.HTTP b.FTP c.Telnet d.TCP

Description : Which one of the following allows a user at one site to establish a connection to another site and then pass keystrokes from local host to remote host? a.HTTP b.FTP c.Telnet d.TCP

Last Answer : c.Telnet

Which of the following control fields in TCP header is used to specify the sender has no more data to transmit? (A) FIN (B) RST (C) SYN (D) PSH

Description : Which of the following control fields in TCP header is used to specify the sender has no more data to transmit? (A) FIN (B) RST (C) SYN (D) PSH

Last Answer : (A) FIN 

Which of the transport layer protocols is connectionless? A) UDP B) TCP C) FTP D) Nvt

Description : Which of the transport layer protocols is connectionless? A) UDP B) TCP C) FTP D) Nvt

Last Answer : A) UDP

A layer-4 firewall (a device that can look at all protocol headers up to the transport layer) CANNOT a. block entire HTTP traffic during 9:00PM and 5 :0OAM b. block all ICMP trafficc. stop incoming traffic from a specific IP address but allow outgoing traffic to the same IP address d. block TCP traffic from a specific user on a multi-user system during 9:00PM and 5:00AM

Description : A layer-4 firewall (a device that can look at all protocol headers up to the transport layer) CANNOT a. block entire HTTP traffic during 9:00PM and 5 :0OAM b. block all ICMP traffic c. stop ... address d. block TCP traffic from a specific user on a multi-user system during 9:00PM and 5:00AM

Last Answer : d. block TCP traffic from a specific user on a multi-user system during 9:00PM and 5:00AM

Which of the following transport layer protocols is used to support electronic mail? a. SMTP b. IP c. TCP d. UDP

Description : Which of the following transport layer protocols is used to support electronic mail? a. SMTP b. IP c. TCP d. UDP

Last Answer : c. TCP

The transport layer protocols used for real time multimedia, file transfer, DNS and email, respectively are: a. TCP, UDP, UDP and TCP b. UDP, TCP, TCP and UDP c. UDP, TCP, UDP and TCP d. TCP, UDP, TCP and UDP

Description : The transport layer protocols used for real time multimedia, file transfer, DNS and email, respectively are: a. TCP, UDP, UDP and TCP b. UDP, TCP, TCP and UDP c. UDP, TCP, UDP and TCP d. TCP, UDP, TCP and UDP

Last Answer : c. UDP, TCP, UDP and TCP

Which of the following are transport layer protocols used in networking? a. TCP and FTP b. UDP and HTTP c. TCP and UDP d. HTTP and FTP

Description : Which of the following are transport layer protocols used in networking? a. TCP and FTP b. UDP and HTTP c. TCP and UDP d. HTTP and FTP

Last Answer : c. TCP and UDP

Which of the following are transport layer protocols used in networking? a. TCP and FTP b. UDP and HTTP c. TCP and UDP d. HTTP and FTP

Description : Which of the following are transport layer protocols used in networking? a. TCP and FTP b. UDP and HTTP c. TCP and UDP d. HTTP and FTP

Last Answer : c. TCP and UDP

Which protocol does HTTP (Hyper Text Transfer Protocol) - use for transferring web pages at the Transport layer a. IP b. UDP c. TCP d. ARP

Description : Which protocol does HTTP (Hyper Text Transfer Protocol) - use for transferring web pages at the Transport layer a. IP b. UDP c. TCP d. ARP

Last Answer : c. TCP

Which protocol does switch use at the layer 2 for finding MAC address? a. ICMP b. UDP c. ARP d. TCP

Description : Which protocol does switch use at the layer 2 for finding MAC address? a. ICMP b. UDP c. ARP d. TCP

Last Answer : c. ARP