An ACK number of 1000 in TCP always means that a. 999 bytes have been successfully received b. 1000 bytes have been successfully received c. 1001 bytes have been successfully received d. None of the above

An ACK number of 1000 in TCP always
means that
a. 999 bytes have been successfully
received
b. 1000 bytes have been successfully
received
c. 1001 bytes have been successfully
received
d. None of the above
by

1 Answer

Answer :

d. None of the above
by

Related questions

In Go-Back-N ARQ, if frames 4,5, and 6 are received successfully, thereceiver may send an ACK _______ to thesender. A) 5 B) 6 C) 7 D) any of theabove

Description : In Go-Back-N ARQ, if frames 4,5, and 6 are received successfully, thereceiver may send an ACK _______ to thesender. A) 5 B) 6 C) 7 D) any of theabove

Last Answer : 7

I forgot the last digit of a 7-digit telephone number. If I randomly dial the final 3 digits after correctly dialing the first four, then what is the chance of dialing the correct number? a) 1/1001 b) 1/1000 c) 1/999 d) 1/990

Description : I forgot the last digit of a 7-digit telephone number. If I randomly dial the final 3 digits after correctly dialing the first four, then what is the chance of dialing the correct number? a) 1/1001 b) 1/1000 c) 1/999 d) 1/990

Last Answer : b) 1/1000

What is the maximum size of data that the application layer can pass on to the TCP layer below? a. Any size b. 216 bytes - size of TCP header c. 216 bytes d. 1500

Description : What is the maximum size of data that the application layer can pass on to the TCP layer below? a. Any size b. 216 bytes - size of TCP header c. 216 bytes d. 1500

Last Answer : a. Any size

In a telephone system, the customer’s telephone directory numbering is from 000 to 999, what is the capacity of the system? A. 1000 lines B. 100,000 lines C. D. 100 lines lines

Description : In a telephone system, the customer’s telephone directory numbering is from 000 to 999, what is the capacity of the system? A. 1000 lines B. 100,000 lines C. 10,000 lines D. 100 lines

Last Answer : A. 1000 lines

Which Nmap scan is does not completely open a TCP connection? A. SYN stealth scan B. TCP scan C. XMAS tree scan D. ACK scan

Description : Which Nmap scan is does not completely open a TCP connection? A. SYN stealth scan B. TCP scan C. XMAS tree scan D. ACK scan

Last Answer : A. SYN stealth scan

An IP datagram of size 1000 bytes arrives at a router. The router has to forward this packet on a link whose MTU (maximum transmission unit) is 100 bytes. Assume that the size of the IP header is 20 bytes. The number of fragments that the IP datagram will be divided into for transmission is : a. 10 b. 50 c. 12 d. 13

Description : An IP datagram of size 1000 bytes arrives at a router. The router has to forward this packet on a link whose MTU (maximum transmission unit) is 100 bytes. Assume that the size of the IP header is 20 bytes ... the IP datagram will be divided into for transmission is : a. 10 b. 50 c. 12 d. 13

Last Answer : d. 13

When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errorsd. all of the above

Description : When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Last Answer : only when no error occurs at the transmission level

When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Description : When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Last Answer : only when no error occurs at the transmission level

Which statement is valid? a. 1KB = 1024 bytes b. 1 MB=2048 bytes c. 1 MB = 1000 kilobytes d. 1 KB = 1000 bytes

Description : Which statement is valid? a. 1KB = 1024 bytes b. 1 MB=2048 bytes c. 1 MB = 1000 kilobytes d. 1 KB = 1000 bytes

Last Answer : 1KB = 1024 bytes

A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of an acknowledgement is 100 bytes and the transmission rate at the receiver is 8 Kbps. The one-way propagation delay is 100 milliseconds. Assuming no frame is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Last Answer : a. 2500

In IPv4, if the fragment offset hasa value of 100, it means that _______. A) thedatagram has notbeen fragmented B) thedatagram is 100 bytes in size C) thefirst byte of the datagram is byte100 D) the first byteof the datagram is byte800

Description : In IPv4, if the fragment offset hasa value of 100, it means that _______. A) thedatagram has notbeen fragmented B) thedatagram is 100 bytes in size C) thefirst byte of the datagram is byte100 D) the first byteof the datagram is byte800

Last Answer : the first byteof the datagram is byte800

In IPv4 header, an HLEN value of decimal 10 means _______ A. there are 10 bytes of options B. there are 40 bytes of optionsC. there are 10 bytes in the header D. there are 40 bytes in the header

Description : In IPv4 header, an HLEN value of decimal 10 means _______ A. there are 10 bytes of options B. there are 40 bytes of options C. there are 10 bytes in the header D. there are 40 bytes in the header

Last Answer : D. there are 40 bytes in the header

The IPv4header size _______. A) is 20 to 60 bytes long B) is always 20bytes long C) is always 60bytes long D) depends on the MTU

Description : The IPv4header size _______. A) is 20 to 60 bytes long B) is always 20bytes long C) is always 60bytes long D) depends on the MTU

Last Answer : is 20 to 60 bytes long

The IPv4 header size _______ A. is 20 to 60 bytes long B. is always 20 bytes long C. is always 60 bytes long D. depends on the MTU

Description : The IPv4 header size _______ A. is 20 to 60 bytes long B. is always 20 bytes long C. is always 60 bytes long D. depends on the MTU

Last Answer : A. is 20 to 60 bytes long

The excess 3 code of decimal number 26 is (A) 0100 1001 (B) 01011001 (C) 1000 1001 (D) 01001101

Description : The excess 3 code of decimal number 26 is (A) 0100 1001 (B) 01011001 (C) 1000 1001 (D) 01001101

Last Answer : Ans: B (26)10 in BCD is ( 00100110 ) BCD Add 011 to each BCD 01011001 for excess – 3

The TCP sliding window a. can be used to control the flow of information b. always occurs when the field value is 0 c. always occurs when the field value is 1 d. occurs horizontally

Description : The TCP sliding window a. can be used to control the flow of information b. always occurs when the field value is 0 c. always occurs when the field value is 1 d. occurs horizontally

Last Answer : a. can be used to control the flow of information

The probability thata singlebit will be inerror on a typical public telephone lineusing 4800 bps modem is 10 to the power -3. If no error detection mechanism is used, the residual error ratefor a communicationline using 9-bit frames is approximately equal to A. 0.003 B. 0.009 C. 0.991 D. 0.999 E. None of the above

Description : The probability thata singlebit will be inerror on a typical public telephone lineusing 4800 bps modem is 10 to the power -3. If no error detection mechanism is used, the residual error ratefor a communicationline using 9-bit frames is ... to A. 0.003 B. 0.009 C. 0.991 D. 0.999 E. None of the above

Last Answer : 0.009

First invasion of Sultan Muhammood of Ghazni in subcontinent was took place in A. 998 B. 712 C. 1000 D. 1001

Description : First invasion of Sultan Muhammood of Ghazni in subcontinent was took place in A. 998 B. 712 C. 1000 D. 1001

Last Answer : ANSWER: C

The sign magnitude representation of -1 is __________ a) 0001 b) 1110 c) 1000 d) 1001

Description : The sign magnitude representation of -1 is __________ a) 0001 b) 1110 c) 1000 d) 1001

Last Answer : Answer: d Explanation: The first leftmost bit i.e. the most significant bit in the sign magnitude represents if the number is positive or negative. If the MSB is 1, the number is negative else if it is 0, the number is positive. Here, +1=0001 and for - 1=1001

The BCD equivalent of decimal 912 is ________. 60) A) 1001 0001 0010BCD B) 1001 1000 0001BCD C) 0111 1111 1110BCD D) 0010 001 1001BCD

Description : The BCD equivalent of decimal 912 is ________. 60) A) 1001 0001 0010BCD B) 1001 1000 0001BCD C) 0111 1111 1110BCD D) 0010 001 1001BCD

Last Answer : A) 1001 0001 0010BCD

The BCD equivalent of decimal 88 is ________. 50) A) 1000 1000BCD B) 1010 1000BCD C) 1100 0010BCD D) 1001 0000BCD

Description : The BCD equivalent of decimal 88 is ________. 50) A) 1000 1000BCD B) 1010 1000BCD C) 1100 0010BCD D) 1001 0000BCD

Last Answer : A) 1000 1000BCD

The maximum size of the data that the application layer can pass on to the TCP layer below is ......... (1) 216 bytes (2) 216 bytes + TCP header length (3) 216 bytes - TCP header length (4) 215 bytes

Description : The maximum size of the data that the application layer can pass on to the TCP layer below is ......... (1) 216 bytes (2) 216 bytes + TCP header length (3) 216 bytes - TCP header length (4) 215 bytes

Last Answer : Answer: Marks to all

State weather the following statement is true or false for Point-to-Point Protocol 1). It is still in widespread use for dial-up TCP/IP connections 2) Point-to-point circuits in the form of asynchronous lines have long been the mainstay for data communications. 3). Point-to-Point Protocol (PPP) is a network-specific standard protocol with STD number 51. A. 1. True, 2. true, 3. true B. 1. true, 2. false, 3. false C. 1. false, 2. false, 3. false D. 1. true, 2. false, 3. true

Description : State weather the following statement is true or false for Point-to-Point Protocol 1). It is still in widespread use for dial-up TCP/IP connections 2) Point-to-point circuits in the form of asynchronous lines have long been ... . false C. 1. false, 2. false, 3. false D. 1. true, 2. false, 3. true

Last Answer : D. 1. true, 2. false, 3. true

The length of Seconds Pendulum is a.992 mm b.999 mm c.994 mm d.995 mm e.1000 mm

Description : The length of Seconds Pendulum is a.992 mm b.999 mm c.994 mm d.995 mm e.1000 mm

Last Answer : c. 994 mm

A 1 Mhz carrier is amplitude modulated by a pure 200-Hz audio test tone. Which of the following combinations of frequencies represent the total content of the AM signal? A. 1 MHz and 200 Hz B. 1 MHz and 1000.2 kHz C. 999.8 kHz, 1000 kHz, and 1000.2 kHz D. 999.8 kHz and 1000.2 kHz

Description : A 1 Mhz carrier is amplitude modulated by a pure 200-Hz audio test tone. Which of the following combinations of frequencies represent the total content of the AM signal? A. 1 MHz and 200 Hz B. 1 MHz and 1000.2 kHz C. 999.8 kHz, 1000 kHz, and 1000.2 kHz D. 999.8 kHz and 1000.2 kHz

Last Answer : C. 999.8 kHz, 1000 kHz, and 1000.2 kHz

The term gigabyte refers to a. 1024 bytes b. 1024 kilobytes c. 1024 megabytes d. 1024 gigabyte

Description : The term gigabyte refers to a. 1024 bytes b. 1024 kilobytes c. 1024 megabytes d. 1024 gigabyte

Last Answer : 1024 megabytes

The term gigabyte refers to a. 1024 bytes b. 1024 kilobytes c. 1024 megabytes d. 1024 gigabyte

Description : The term gigabyte refers to a. 1024 bytes b. 1024 kilobytes c. 1024 megabytes d. 1024 gigabyte

Last Answer : 1024 megabytes

Which of the following is true? a. Fields are composed of bytes b. Records are composed of fields c. Fields are composed of characters d. All of above

Description : Which of the following is true? a. Fields are composed of bytes b. Records are composed of fields c. Fields are composed of characters d. All of above

Last Answer : All of above

The maximum frame length for 10-Mbps Ethernet is ________ bytes. A) 1518 B) 1500 C) 1200 D) none of the abov

Description : The maximum frame length for 10-Mbps Ethernet is ________ bytes. A) 1518 B) 1500 C) 1200 D) none of the abov

Last Answer : 1518

Inasynchronous transmission, the gap time between bytes is _______. A) fixed B) variable C) afunctionof the data rate D) zero

Description : Inasynchronous transmission, the gap time between bytes is _______. A) fixed B) variable C) afunctionof the data rate D) zero

Last Answer : variable

In SONET, for each frame, the bytes are transmitted __________. A) from left to the right, top to bottom B) from right to theleft, bottom to top C) from left to the right, bottom to top D) from right to the left, top to bottom

Description : In SONET, for each frame, the bytes are transmitted __________. A) from left to the right, top to bottom B) from right to theleft, bottom to top C) from left to the right, bottom to top D) from right to the left, top to bottom

Last Answer : from left to the right, bottom to top

In Frame Relay, the EA field defines thenumber of bytes; it is _____ in the last byte of the address. A) 0 B) 1 C) 2 D) 3

Description : In Frame Relay, the EA field defines thenumber of bytes; it is _____ in the last byte of the address. A) 0 B) 1 C) 2 D) 3

Last Answer : 1

In Frame Relay, an address can be________ bytes. A) only 2 B) 2 to 3 C) 2 to 4 D) none of the above

Description : In Frame Relay, an address can be________ bytes. A) only 2 B) 2 to 3 C) 2 to 4 D) none of the above

Last Answer : 2 to 4

The IPv4header size _______. A) is 20 to 60 bytes long B) is 20 bytes long C) is 60 bytes long D) noneof the above

Description : The IPv4header size _______. A) is 20 to 60 bytes long B) is 20 bytes long C) is 60 bytes long D) noneof the above

Last Answer : is 20 to 60 bytes long

In IPv4, what is the value of the total length field in bytes if the header is 28 bytes and the data field is 400bytes? A) 428 B) 407 C) 107 D) 427

Description : In IPv4, what is the value of the total length field in bytes if the header is 28 bytes and the data field is 400bytes? A) 428 B) 407 C) 107 D) 427

Last Answer : 428

In IPv4 header, an HLEN value of decimal 10 means_______. A) there are 10bytes ofoptions B) there are 40bytes ofoptions C) there are 10bytes inthe header D) thereare 40 bytes in the header

Description : In IPv4 header, an HLEN value of decimal 10 means_______. A) there are 10bytes ofoptions B) there are 40bytes ofoptions C) there are 10bytes inthe header D) thereare 40 bytes in the header

Last Answer : thereare 40 bytes in the header

What is the commonly used unit for measuring the speed of data transmission? A) Bytes per second B) Baud C) Bits per second D) Both B and C

Description : What is the commonly used unit for measuring the speed of data transmission? A) Bytes per second B) Baud C) Bits per second D) Both B and C

Last Answer : B) Baud

Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is __________. a. 400 bps b. 800 bps c. 1600 bps d. 3200 bps

Description : Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is __________. a. 400 bps b. 800 bps c. 1600 bps d. 3200 bps

Last Answer : d. 3200 bps

In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the first and the last bytes of the payload, respectively are a. Last fragment, 2400 and 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Description : In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the ... 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Last Answer : c. Last fragment, 2400 and 2759

In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the first and the last bytes of the payload, respectively are a. Last fragment, 2400 and 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Description : In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the ... 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Last Answer : c. Last fragment, 2400 and 2759

The network layer is concerned with __________ of data. a. bits b. frames c. packets d. bytes

Description : The network layer is concerned with __________ of data. a. bits b. frames c. packets d. bytes

Last Answer : c. packets

The minimum frame size required for a CSMA/CD based computer network running at 1 Gbps on a 200m cable with a link speed of 2 × 108m/s is a. 125 bytes b. 250 bytes c. 500 bytes d. None of these

Description : The minimum frame size required for a CSMA/CD based computer network running at 1 Gbps on a 200m cable with a link speed of 2 × 108m/s is a. 125 bytes b. 250 bytes c. 500 bytes d. None of these

Last Answer : b. 250 bytes

How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Description : How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Last Answer : b. 12,000 bytes

Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Description : Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Last Answer : d. 20000

Header of a frame generally contains a. synchronization bytes b. addresses c. frame identifier d. all of the mentioned

Description : Header of a frame generally contains a. synchronization bytes b. addresses c. frame identifier d. all of the mentioned

Last Answer : d. all of the mentioned

A UDP datagram of _____ bytes is acceptable to all implementations A. 516 B. 1024 C. 256 D. 512

Description : A UDP datagram of _____ bytes is acceptable to all implementations A. 516 B. 1024 C. 256 D. 512

Last Answer : A. 516

The network layer encapsulates the data into _______of data. A. bits B. frames C. packets D. bytes

Description : The network layer encapsulates the data into _______of data. A. bits B. frames C. packets D. bytes

Last Answer : C. packets

The maximum length (in bytes) of an IPv4 datagram is? A. 32 B. 1024 C. 65535 D. 512

Description : The maximum length (in bytes) of an IPv4 datagram is? A. 32 B. 1024 C. 65535 D. 512

Last Answer : C. 65535

Header of a Layer two frame usually contain ______________ A. synchronization bytes B. addresses C. frame identifier D. all of the mentioned

Description : Header of a Layer two frame usually contain ______________ A. synchronization bytes B. addresses C. frame identifier D. all of the mentioned

Last Answer : D. all of the mentioned

The network layer is concerned with __________ of data. a) bits b) frames c) packets d) bytes

Description : The network layer is concerned with __________ of data. a) bits b) frames c) packets d) bytes

Last Answer : c) packets