A coal containing high amount of volatile matter will have (A) Low ignition temperature (B) Very little ash content (C) High fusion point of its ash (D) Low adiabatic flame temperature

A coal containing high amount of volatile matter will have
(A) Low ignition temperature
(B) Very little ash content
(C) High fusion point of its ash
(D) Low adiabatic flame temperature
by

1 Answer

Answer :

(A) Low ignition temperature
by

Related questions

A coal having higher volatile matter content will necessarily have lower (A) Ash fusion temperature (B) Calorific value (C) Ignition temperature (D) Caking index

Description : A coal having higher volatile matter content will necessarily have lower (A) Ash fusion temperature (B) Calorific value (C) Ignition temperature (D) Caking index

Last Answer : (C) Ignition temperature

For long flame and easy ignition, the coal used should have (A) High volatile matter (B) Low ash (C) High calorific value (D) High ash

Description : For long flame and easy ignition, the coal used should have (A) High volatile matter (B) Low ash (C) High calorific value (D) High ash

Last Answer : (A) High volatile matter

Coals used for the generation of producer gas should have (A) High caking index (B) Low fusion point of ash (C) High volatile matter content (D) Very low ash content (8-10%)

Description : Coals used for the generation of producer gas should have (A) High caking index (B) Low fusion point of ash (C) High volatile matter content (D) Very low ash content (8-10%)

Last Answer : (C) High volatile matter content

Fat coals' are those coals which have very high (A) Caking capacity (B) Volatile matter content (C) Fusion point of its ash (D) Inherent moisture conten

Description : Fat coals' are those coals which have very high (A) Caking capacity (B) Volatile matter content (C) Fusion point of its ash (D) Inherent moisture conten

Last Answer : (A) Caking capacity

A coal having high amount of volatile matter (A) Would require smaller combustion chamber (B) Produces very little of tar and gas on carbonisation (C) Ignites easily and burns with long smoky flame (D) All (A), (B) and (C)

Description : A coal having high amount of volatile matter (A) Would require smaller combustion chamber (B) Produces very little of tar and gas on carbonisation (C) Ignites easily and burns with long smoky flame (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

A coal having high amount of volatile matter (A) Would require smaller combustion chamber (B) Produces very little of tar and gas on carbonisation(C) Ignites easily and burns with long smoky flame(D) All (A), (B) and (C)

Description : A coal having high amount of volatile matter (A) Would require smaller combustion chamber (B) Produces very little of tar and gas on carbonisation (C) Ignites easily and burns with long smoky flame (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Ignition temperature decreases progressively from anthracite to lignite, because (A) Volatile matter content increases (B) Carbon content decreases (C) Moisture content increases (D) Ash content increases

Description : Ignition temperature decreases progressively from anthracite to lignite, because (A) Volatile matter content increases (B) Carbon content decreases (C) Moisture content increases (D) Ash content increases

Last Answer : (A) Volatile matter content increases

Which of the following would require least amount of secondary air for combustion? (A) Coke breeze containing 25% ash and 2% volatile matter (B) Anthracite containing 10% volatile matter and 8% ash(C) Bituminous coal containing 20% ash and 25% volatile matter(D) Semi-bituminous coal containing 25% ash and 20% volatile matter

Description : Which of the following would require least amount of secondary air for combustion? (A) Coke breeze containing 25% ash and 2% volatile matter (B) Anthracite containing 10% volatile matter and 8% ash ... ash and 25% volatile matter (D) Semi-bituminous coal containing 25% ash and 20% volatile matter

Last Answer : (A) Coke breeze containing 25% ash and 2% volatile matter

Fat' coal means a coal having (A) Low calorific value (B) High volatile matter (C) Low ash content

Description : Fat' coal means a coal having (A) Low calorific value (B) High volatile matter (C) Low ash content

Last Answer : (B) High volatile matter

A coal having higher volatile matter content, has lower (A) Smoking tendency on burning (B) Coke oven gas yield on carbonisation (C) Chance of catching fire during storage in open space (D) Ignition temperature

Description : A coal having higher volatile matter content, has lower (A) Smoking tendency on burning (B) Coke oven gas yield on carbonisation (C) Chance of catching fire during storage in open space (D) Ignition temperature

Last Answer : (D) Ignition temperature

Anthracite coal (A) Contains more volatile matter than bituminous coal (B) Ignites more easily than bituminous coal (C) Is essentially a coking coal (D) Burns with short, bluish, yellow-tipped flame producing very little smoke

Description : Anthracite coal (A) Contains more volatile matter than bituminous coal (B) Ignites more easily than bituminous coal (C) Is essentially a coking coal (D) Burns with short, bluish, yellow-tipped flame producing very little smoke

Last Answer : (D) Burns with short, bluish, yellow-tipped flame producing very little smoke

The reason for excessive clinker formation in gas producers is the (A) Use of coal/coke containing a high % of fines and ash (B) Use of fuel having too low an ash fusion temperature (C) Development of hot spots in the fuel bed and an abnormally high rate of gasification (D) All (A), (B) and (C)

Description : The reason for excessive clinker formation in gas producers is the (A) Use of coal/coke containing a high % of fines and ash (B) Use of fuel having too low an ash fusion temperature (C) Development of hot spots in the fuel bed and an abnormally high rate of gasification (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Coal containing large quantity of __________ are difficult to wash. (A) Ash (B) Inherent mineral matter (C) Free impurities (D) Volatile matter

Description : Coal containing large quantity of __________ are difficult to wash. (A) Ash (B) Inherent mineral matter (C) Free impurities (D) Volatile matter

Last Answer : (B) Inherent mineral matter

A coal with high __________ content, would ignite most easily. (A) Fixed carbon (B) Volatile matter (C) Ash (D) Oxygen

Description : A coal with high __________ content, would ignite most easily. (A) Fixed carbon (B) Volatile matter (C) Ash (D) Oxygen

Last Answer : (B) Volatile matter

Cannel coal (A) Is non-coking (B) Has a high volatile matter content and burns with a luminous smoky flame (C) Is a non-banded coal which can be ignited easily with a match stick or candle flame, hence is so named (D) All (A), (B) and (C

Description : Cannel coal (A) Is non-coking (B) Has a high volatile matter content and burns with a luminous smoky flame (C) Is a non-banded coal which can be ignited easily with a match stick or candle flame, hence is so named (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

The advantages of firing pulverised coal in the furnace lies in the fact that, it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal (C) Accelerates the burning rate and economises on fuel consumption (D) All (A), (B) and (C)

Description : The advantages of firing pulverised coal in the furnace lies in the fact that, it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal (C) Accelerates the burning rate and economises on fuel consumption (D) All (A), (B) and (C)

Last Answer : (C) Accelerates the burning rate and economises on fuel consumption

A good quality coal should have (A) Low fusion point of ash (B) High ash content (C) High sulphur (D) None of these

Description : A good quality coal should have (A) Low fusion point of ash (B) High ash content (C) High sulphur (D) None of these

Last Answer : (D) None of these

The advantage of firing pulverised coal in the furnace lies in the fact, that it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal(C) Accelerates the burning rate and economises on fuel combustion(D) All (A), (B) and (C)

Description : The advantage of firing pulverised coal in the furnace lies in the fact, that it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal (C) Accelerates the burning rate and economises on fuel combustion (D) All (A), (B) and (C)

Last Answer : (C) Accelerates the burning rate and economises on fuel combustion

A good quality coal should have (A) Low fusion point of ash (B) High ash content (C) High sulphur content (D) None of these

Description : A good quality coal should have (A) Low fusion point of ash (B) High ash content (C) High sulphur content (D) None of these

Last Answer : (D) None of these

The specific gravity of coal depends mainly on its __________ content. (A) Carbon (B) Volatile matter (C) Ash (D) Moisture

Description : The specific gravity of coal depends mainly on its __________ content. (A) Carbon (B) Volatile matter (C) Ash (D) Moisture

Last Answer : (C) Ash

Ultimate analysis of coal determines its __________ content. (A) Carbon, hydrogen, nitrogen & sulphur (B) Carbon, ash, sulphur & nitrogen (C) Carbon, sulphur, volatile matter & ash (D) Carbon, volatile matter, ash & moisture

Description : Ultimate analysis of coal determines its __________ content. (A) Carbon, hydrogen, nitrogen & sulphur (B) Carbon, ash, sulphur & nitrogen (C) Carbon, sulphur, volatile matter & ash (D) Carbon, volatile matter, ash & moisture

Last Answer : (A) Carbon, hydrogen, nitrogen & sulphur

Proximate analysis of coal determines its __________ content. (A) Moisture, ash, sulphur & volatile matter (B) Moisture, volatile matter, ash & fixed carbon (C) Moisture, sulphur, nitrogen & fixed carbon (D) None of these

Description : Proximate analysis of coal determines its __________ content. (A) Moisture, ash, sulphur & volatile matter (B) Moisture, volatile matter, ash & fixed carbon (C) Moisture, sulphur, nitrogen & fixed carbon (D) None of these

Last Answer : (B) Moisture, volatile matter, ash & fixed carbon

Proximate analysis of coal determines its __________ content. (A) Moisture, ash, sulphur & volatile matter (B) Moisture & volatile matter (C) Moisture, sulphur, nitrogen & fixed carbon (D) None of these

Description : Proximate analysis of coal determines its __________ content. (A) Moisture, ash, sulphur & volatile matter (B) Moisture & volatile matter (C) Moisture, sulphur, nitrogen & fixed carbon (D) None of these

Last Answer : (B) Moisture & volatile matter

Ultimate analysis of coal determines its __________ content. (A) Carbon, hydrogen, nitrogen & sulphur (B) Carbon, ash, sulphur & nitrogen(C) Carbon, sulphur, volatile matter & ash(D) Carbon, volatile matter, ash & moisture

Description : Ultimate analysis of coal determines its __________ content. (A) Carbon, hydrogen, nitrogen & sulphur (B) Carbon, ash, sulphur & nitrogen (C) Carbon, sulphur, volatile matter & ash (D) Carbon, volatile matter, ash & moisture

Last Answer : (C) Carbon, sulphur, volatile matter & ash

The specific gravity of coal depends mainly on its __________ content. (A) Carbon (B) Volatile matter (C) Ash (D) Moisture

Description : The specific gravity of coal depends mainly on its __________ content. (A) Carbon (B) Volatile matter (C) Ash (D) Moisture

Last Answer : Option D

Degree of carbonisation of coal during coke making can be roughly judged by the __________ of the coke produced. (A) Colour (B) Moisture content (C) Ash content (D) Volatile matter

Description : Degree of carbonisation of coal during coke making can be roughly judged by the __________ of the coke produced. (A) Colour (B) Moisture content (C) Ash content (D) Volatile matter

Last Answer : (D) Volatile matter

A good metallurgical coke (A) Should have high porosity (B) Should be brittle (C) Must contain moderate quantities of ash, moisture, sulphur and volatile matters (D) Should have low fusion point of its ash

Description : A good metallurgical coke (A) Should have high porosity (B) Should be brittle (C) Must contain moderate quantities of ash, moisture, sulphur and volatile matters (D) Should have low fusion point of its ash

Last Answer : (A) Should have high porosity

A coal having high ratio of volatile matter to fixed carbon as compared to a coal having low ratio of volatile matter to fixed carbon (A) Is less liable to spontaneous combustion on storage (B) Is more difficult to ignite and produces a shorter flame (C) Requires smaller combustion space and less secondary air (D) None of these

Description : A coal having high ratio of volatile matter to fixed carbon as compared to a coal having low ratio of volatile matter to fixed carbon (A) Is less liable to spontaneous combustion on storage (B) ... a shorter flame (C) Requires smaller combustion space and less secondary air (D) None of these

Last Answer : (D) None of these

Pulverised coal used in boiler firing need not have (A) Less moisture content (B) High fusion point of its ash (C) High bulk density (D) Lower ash conten

Description : Pulverised coal used in boiler firing need not have (A) Less moisture content (B) High fusion point of its ash (C) High bulk density (D) Lower ash conten

Last Answer : (B) High fusion point of its ash

A good metallurgical coke should have very low (A) Sulphur & phosphorous content (B) Porosity (C) Fusion point of its ash (D) Hardness & strength

Description : A good metallurgical coke should have very low (A) Sulphur & phosphorous content (B) Porosity (C) Fusion point of its ash (D) Hardness & strength

Last Answer : (A) Sulphur & phosphorous content

Coke used for the production of calcium carbide should have (A) Low ash content (B) Low ignition temperature (C) High electrical resistivity (D) All (A), (B) and (C)

Description : Coke used for the production of calcium carbide should have (A) Low ash content (B) Low ignition temperature (C) High electrical resistivity (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Washing of coal does not reduce its (A) S & P content (B) Heating value (C) Fusion point of ash (D) None of these

Description : Washing of coal does not reduce its (A) S & P content (B) Heating value (C) Fusion point of ash (D) None of these

Last Answer : (D) None of these

Washing of coal (A) Reduces its ash & sulphur content (B) Improves its coking properties (C) Increase the fusion point of its ash by removing chlorine compounds (D) All (A), (B) and (C)

Description : Washing of coal (A) Reduces its ash & sulphur content (B) Improves its coking properties (C) Increase the fusion point of its ash by removing chlorine compounds (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Fusion point of coal ash increases with increase in its __________ content. (A) Iron sulphate (B) Iron silicate (C) Lime and magnesia (D) All (A), (B) and (C)

Description : Fusion point of coal ash increases with increase in its __________ content. (A) Iron sulphate (B) Iron silicate (C) Lime and magnesia (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Ratio of primary air to secondary air increases with increase in the rank of coal, because the (A) High rank coals have higher amount of volatile matter (B) Ratio of fixed carbon to volatile matter increases (C) Oxygen content progressively decreases (D) Calorific value of the coal increases

Description : Ratio of primary air to secondary air increases with increase in the rank of coal, because the (A) High rank coals have higher amount of volatile matter (B) Ratio of fixed carbon to volatile matter increases (C) Oxygen content progressively decreases (D) Calorific value of the coal increases

Last Answer : (B) Ratio of fixed carbon to volatile matter increases

In producer gas making furnace, steam is added along with air to mainly control the (A) Fusion of coal ash & clinker formation (B) C. V. of producer gas (C) Temperature of producer gas (D) Tar content in producer gas

Description : In producer gas making furnace, steam is added along with air to mainly control the (A) Fusion of coal ash & clinker formation (B) C. V. of producer gas (C) Temperature of producer gas (D) Tar content in producer gas

Last Answer : (A) Fusion of coal ash & clinker formation

Which of the following is unsuitable fuel for producer gas manufacture? (A) Coke (B) Anthracite (C) Coal having low fusion point of its ash (D) Coal having high fusion point of its ash

Description : Which of the following is unsuitable fuel for producer gas manufacture? (A) Coke (B) Anthracite (C) Coal having low fusion point of its ash (D) Coal having high fusion point of its ash

Last Answer : (C) Coal having low fusion point of its ash

Assam (India) coals suffers mainly from the disadvantage of high __________ content. (A) Ash (B) Volatile matter (C) Sulphur (4-6%)

Description : Assam (India) coals suffers mainly from the disadvantage of high __________ content. (A) Ash (B) Volatile matter (C) Sulphur (4-6%)

Last Answer : (C) Sulphur (4-6%)

Low temperature oxidation and spontaneous combustion of freshly mined coal is accentuated, if (A) It contains large amount of volatile matter (B) It is stored in tall heaps (C) Smaller fines are stored in large quantity (D) All (A), (B) and (C)

Description : Low temperature oxidation and spontaneous combustion of freshly mined coal is accentuated, if (A) It contains large amount of volatile matter (B) It is stored in tall heaps (C) Smaller fines are stored in large quantity (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Fixed carbon in coal is defined as (A) That present in volatile matters (B) The total quantity of carbon present in the coal (C) Hundred minus the percentage of volatile matter, ash and moisture (D) The one which is present in the residue after combustion

Description : Fixed carbon in coal is defined as (A) That present in volatile matters (B) The total quantity of carbon present in the coal (C) Hundred minus the percentage of volatile matter, ash and moisture (D) The one which is present in the residue after combustion

Last Answer : (C) Hundred minus the percentage of volatile matter, ash and moisture

Coke compared to the coal from which it has been made, contains (A) Less volatile matter (B) More carbon (C) Greater percentage of ash (D) All (A), (B) and (C)

Description : Coke compared to the coal from which it has been made, contains (A) Less volatile matter (B) More carbon (C) Greater percentage of ash (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

A coal with high ash content (A) Has higher calorific value (B) Is harder and stronger(C) Is not subjected to washing(D) Has low quantity of mineral matter

Description : A coal with high ash content (A) Has higher calorific value (B) Is harder and stronger (C) Is not subjected to washing (D) Has low quantity of mineral matter

Last Answer : (B) Is harder and stronger

During combustion of coal on grate, clinker formation is increased by the (A) Use of thick fire bed (B) Low fusion point of ash (< 1100° C) (C) Use of preheated primary air (D) All (A), (B) & (C)

Description : During combustion of coal on grate, clinker formation is increased by the (A) Use of thick fire bed (B) Low fusion point of ash (< 1100° C) (C) Use of preheated primary air (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Out of the following, which is the most important parameter for the blast furnace grade coke? (A) CSR & CRI (B) Ash content (C) Moisture content (D) Volatile matter content

Description : Out of the following, which is the most important parameter for the blast furnace grade coke? (A) CSR & CRI (B) Ash content (C) Moisture content (D) Volatile matter content

Last Answer : (A) CSR & CRI

In high temperature carbonisation (as compared to low temperature carbonisation) of coal, the (A) Gas yield is less (B) Tar yield is more (C) Ignition temperature of coke produced is less (D) Aromatic content of tar produced is more

Description : In high temperature carbonisation (as compared to low temperature carbonisation) of coal, the (A) Gas yield is less (B) Tar yield is more (C) Ignition temperature of coke produced is less (D) Aromatic content of tar produced is more

Last Answer : (D) Aromatic content of tar produced is more

Pick out the wrong statement. (A) Pulverised fuel can be completely burnt with less percentage of excess air compared to lump coal (B) Low grade coal can be used, but generally high volatile matter coals are more suitable for making pulverised fuel (C) Regulation of furnace temperature and atmosphere (oxidising or reducing) is easily possible with pulverised fuel firing (D) None of these

Description : Pick out the wrong statement. (A) Pulverised fuel can be completely burnt with less percentage of excess air compared to lump coal (B) Low grade coal can be used, but generally high volatile ... and atmosphere (oxidising or reducing) is easily possible with pulverised fuel firing (D) None of these

Last Answer : (D) None of these

Fussain (A) Is friable, charcoal like substance(B) Has highest fixed carbon and lowest volatile matter content of all the four banded components of coal (C) Is non-coking, but when blended with highly coking coal, controls its swelling and produces high strength coke on carbonisation (D) All (A), (B) and (C)

Description : Fussain (A) Is friable, charcoal like substance (B) Has highest fixed carbon and lowest volatile matter content of all the four banded components of coal (C) Is non-coking, but when blended with highly coking ... its swelling and produces high strength coke on carbonisation (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The weathering index of a coal (A) Gives an idea of the fusion temperature of ash (B) Is related to its calorific value (C) Is a measure of its size stability, when stored & exposed to weather (D) Is a measure of its caking tendency

Description : The weathering index of a coal (A) Gives an idea of the fusion temperature of ash (B) Is related to its calorific value (C) Is a measure of its size stability, when stored & exposed to weather (D) Is a measure of its caking tendency

Last Answer : (C) Is a measure of its size stability, when stored & exposed to weather

In low temperature carbonisation of coal, the(A) Yield of coke oven gas is 290 Nm3/ton dry coal(B) Volatile matter in coke is zero(C) Temperature maintained is 700°C(D) Yield of tar is about 3% of dry coal

Description : In low temperature carbonisation of coal, the (A) Yield of coke oven gas is 290 Nm3 /ton dry coal (B) Volatile matter in coke is zero (C) Temperature maintained is 700°C (D) Yield of tar is about 3% of dry coal

Last Answer : (C) Temperature maintained is 700°C