The advantages of firing pulverised coal in the furnace lies in the fact that, it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal (C) Accelerates the burning rate and economises on fuel consumption (D) All (A), (B) and (C)

The advantages of firing pulverised coal in the furnace lies in the fact
that, it
(A) Permits the use of high ash content coal
(B) Permits the use of low fusion point ash coal
(C) Accelerates the burning rate and economises on fuel consumption
(D) All (A), (B) and (C)
by

1 Answer

Answer :

(C) Accelerates the burning rate and economises on fuel consumption
by

Related questions

The advantage of firing pulverised coal in the furnace lies in the fact, that it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal(C) Accelerates the burning rate and economises on fuel combustion(D) All (A), (B) and (C)

Description : The advantage of firing pulverised coal in the furnace lies in the fact, that it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal (C) Accelerates the burning rate and economises on fuel combustion (D) All (A), (B) and (C)

Last Answer : (C) Accelerates the burning rate and economises on fuel combustion

Pulverised coal used in boiler firing need not have (A) Less moisture content (B) High fusion point of its ash (C) High bulk density (D) Lower ash conten

Description : Pulverised coal used in boiler firing need not have (A) Less moisture content (B) High fusion point of its ash (C) High bulk density (D) Lower ash conten

Last Answer : (B) High fusion point of its ash

Which of the following is the most important deterrents to an extended use of pulverised coal in boiler firing? (A) Ash disposal problem (B) Excessive fly-ash discharge from the stack (C) High power consumption in its transportation (D) Erosion of induced draft fan blades

Description : Which of the following is the most important deterrents to an extended use of pulverised coal in boiler firing? (A) Ash disposal problem (B) Excessive fly-ash discharge from the stack (C) High power consumption in its transportation (D) Erosion of induced draft fan blades

Last Answer : (A) Ash disposal problem

Pick out the wrong statement. (A) Pulverised fuel can be completely burnt with less percentage of excess air compared to lump coal (B) Low grade coal can be used, but generally high volatile matter coals are more suitable for making pulverised fuel (C) Regulation of furnace temperature and atmosphere (oxidising or reducing) is easily possible with pulverised fuel firing (D) None of these

Description : Pick out the wrong statement. (A) Pulverised fuel can be completely burnt with less percentage of excess air compared to lump coal (B) Low grade coal can be used, but generally high volatile ... and atmosphere (oxidising or reducing) is easily possible with pulverised fuel firing (D) None of these

Last Answer : (D) None of these

Which of the following is the most important deterrents to an extended use of pulverised coal in boiler firing? (A) Ash disposal problem (B) Excessive fly ash discharge from the stack (C) Higher power consumption in its transportation (D) Erosion of induced draft fan blades

Description : Which of the following is the most important deterrents to an extended use of pulverised coal in boiler firing? (A) Ash disposal problem (B) Excessive fly ash discharge from the stack (C) Higher power consumption in its transportation (D) Erosion of induced draft fan blades

Last Answer : (A) Ash disposal problem

Which of the following fuels is generally not used in thermal power plant boiler firing? (A) Furnace oil, light diesel oil and tar/PCM (B) Pulverised coking coal (C) Coal middling from washeries (D) B.F. gas, coke oven gas and L.D. converter gas

Description : Which of the following fuels is generally not used in thermal power plant boiler firing? (A) Furnace oil, light diesel oil and tar/PCM (B) Pulverised coking coal (C) Coal middling from washeries (D) B.F. gas, coke oven gas and L.D. converter gas

Last Answer : (B) Pulverised coking coal

Function of secondary air in pulverised coal firing is to (A) Transport the coal to the burner (B) Dry the coal (C) Ensure efficient burning of coal around the burner (D) Reduce primary air requirement

Description : Function of secondary air in pulverised coal firing is to (A) Transport the coal to the burner (B) Dry the coal (C) Ensure efficient burning of coal around the burner (D) Reduce primary air requirement

Last Answer : (C) Ensure efficient burning of coal around the burner

A travelling grate stoker is meant for the efficient burning of __________ coal. (A) Caking (B) Pulverised (C) Non-caking (D) High ash

Description : A travelling grate stoker is meant for the efficient burning of __________ coal. (A) Caking (B) Pulverised (C) Non-caking (D) High ash

Last Answer : (C) Non-caking

The reason for excessive clinker formation in gas producers is the (A) Use of coal/coke containing a high % of fines and ash (B) Use of fuel having too low an ash fusion temperature (C) Development of hot spots in the fuel bed and an abnormally high rate of gasification (D) All (A), (B) and (C)

Description : The reason for excessive clinker formation in gas producers is the (A) Use of coal/coke containing a high % of fines and ash (B) Use of fuel having too low an ash fusion temperature (C) Development of hot spots in the fuel bed and an abnormally high rate of gasification (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In producer gas making furnace, steam is added along with air to mainly control the (A) Fusion of coal ash & clinker formation (B) C. V. of producer gas (C) Temperature of producer gas (D) Tar content in producer gas

Description : In producer gas making furnace, steam is added along with air to mainly control the (A) Fusion of coal ash & clinker formation (B) C. V. of producer gas (C) Temperature of producer gas (D) Tar content in producer gas

Last Answer : (A) Fusion of coal ash & clinker formation

Which of the following is unsuitable fuel for producer gas manufacture? (A) Coke (B) Anthracite (C) Coal having low fusion point of its ash (D) Coal having high fusion point of its ash

Description : Which of the following is unsuitable fuel for producer gas manufacture? (A) Coke (B) Anthracite (C) Coal having low fusion point of its ash (D) Coal having high fusion point of its ash

Last Answer : (C) Coal having low fusion point of its ash

Use of pulverised coal in boiler furnace provides (A) High calorific value (B) Better combustion (C) Smokeless burning (D) Less erosion on furnace walls

Description : Use of pulverised coal in boiler furnace provides (A) High calorific value (B) Better combustion (C) Smokeless burning (D) Less erosion on furnace walls

Last Answer : (B) Better combustion

Coal is pulverised before burning in large capacity boiler furnaces mainly to (A) Ensure its complete combustion (B) Facilitate easy ash removal (C) Enhance its calorific value (D) Provide trouble free operation

Description : Coal is pulverised before burning in large capacity boiler furnaces mainly to (A) Ensure its complete combustion (B) Facilitate easy ash removal (C) Enhance its calorific value (D) Provide trouble free operation

Last Answer : (A) Ensure its complete combustion

A coal containing high amount of volatile matter will have (A) Low ignition temperature (B) Very little ash content (C) High fusion point of its ash (D) Low adiabatic flame temperature

Description : A coal containing high amount of volatile matter will have (A) Low ignition temperature (B) Very little ash content (C) High fusion point of its ash (D) Low adiabatic flame temperature

Last Answer : (A) Low ignition temperature

A good quality coal should have (A) Low fusion point of ash (B) High ash content (C) High sulphur (D) None of these

Description : A good quality coal should have (A) Low fusion point of ash (B) High ash content (C) High sulphur (D) None of these

Last Answer : (D) None of these

A good quality coal should have (A) Low fusion point of ash (B) High ash content (C) High sulphur content (D) None of these

Description : A good quality coal should have (A) Low fusion point of ash (B) High ash content (C) High sulphur content (D) None of these

Last Answer : (D) None of these

Combustion of pulverised fuel (A) Requires larger combustion chamber than rich gaseous fuel (B) In a metallurgical furnace does not contaminate the product in the furnace by ash from fuel (C) Suppresses the discharge of fine dust and grit into atmosphere (D) All (A), (B) and (C)

Description : Combustion of pulverised fuel (A) Requires larger combustion chamber than rich gaseous fuel (B) In a metallurgical furnace does not contaminate the product in the furnace by ash from fuel (C) Suppresses the discharge of fine dust and grit into atmosphere (D) All (A), (B) and (C)

Last Answer : (A) Requires larger combustion chamber than rich gaseous fuel

Black smoke coming out of the chimney of a furnace is an indication of the use of __________ in the furnace. (A) Low amount of excess combustion air (B) Large quantity of excess combustion air(C) Hydrocarbon fuel(D) Pulverised coal as fuel

Description : Black smoke coming out of the chimney of a furnace is an indication of the use of __________ in the furnace. (A) Low amount of excess combustion air (B) Large quantity of excess combustion air (C) Hydrocarbon fuel (D) Pulverised coal as fuel

Last Answer : (A) Low amount of excess combustion air

Use of pulverised coal in boilers provides (A) Higher calorific value (B) Better combustion (C) Smokeless burning (D) Less erosion on furnace wall

Description : Use of pulverised coal in boilers provides (A) Higher calorific value (B) Better combustion (C) Smokeless burning (D) Less erosion on furnace wall

Last Answer : (B) Better combustion

Limestone powder is injected during pulverised coal burning in boilers to __________ the flue gases. (A) Reduce SO2 content in (B) Catalytically convert SO2 to SO3 in (C) Increase the dew point of (D) None of these

Description : Limestone powder is injected during pulverised coal burning in boilers to __________ the flue gases. (A) Reduce SO2 content in (B) Catalytically convert SO2 to SO3 in (C) Increase the dew point of (D) None of these

Last Answer : (A) Reduce SO2 content in

Which furnace burns low-ash fusion coal and retains most of the coal ash in the slag?

Description : Which furnace burns low-ash fusion coal and retains most of the coal ash in the slag?

Last Answer : Cyclone furnace.

Fuel used in B.F. stove is (A) Pulverised coal (B) Furnace oil (C) Blast furnace gas/mixed gas (D) Coke oven gas

Description : Fuel used in B.F. stove is (A) Pulverised coal (B) Furnace oil (C) Blast furnace gas/mixed gas (D) Coke oven gas

Last Answer : (C) Blast furnace gas/mixed gas

Washing of coal does not reduce its (A) S & P content (B) Heating value (C) Fusion point of ash (D) None of these

Description : Washing of coal does not reduce its (A) S & P content (B) Heating value (C) Fusion point of ash (D) None of these

Last Answer : (D) None of these

Washing of coal (A) Reduces its ash & sulphur content (B) Improves its coking properties (C) Increase the fusion point of its ash by removing chlorine compounds (D) All (A), (B) and (C)

Description : Washing of coal (A) Reduces its ash & sulphur content (B) Improves its coking properties (C) Increase the fusion point of its ash by removing chlorine compounds (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Fusion point of coal ash increases with increase in its __________ content. (A) Iron sulphate (B) Iron silicate (C) Lime and magnesia (D) All (A), (B) and (C)

Description : Fusion point of coal ash increases with increase in its __________ content. (A) Iron sulphate (B) Iron silicate (C) Lime and magnesia (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following accentuates clinkering troubles on furnace grate burning coal? (A) Low reactivity of carbonised residue containing high proportion of iron & sulphur (B) Low forced draft & fuel bed temperature (C) Thick firebed and preheated primary air (D) All (A), (B) and (C)

Description : Which of the following accentuates clinkering troubles on furnace grate burning coal? (A) Low reactivity of carbonised residue containing high proportion of iron & sulphur (B) Low forced draft & fuel bed temperature (C) Thick firebed and preheated primary air (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following accentuates clinkering trouble on furnace grate burning coal? (A) Low reactivity of carbonised residue containing high proportions of iron & sulphur (B) Low forced draught and fuel bed temperature (C) Thick fire bed and preheated primary air (D) All (A), (B) and (C)

Description : Which of the following accentuates clinkering trouble on furnace grate burning coal? (A) Low reactivity of carbonised residue containing high proportions of iron & sulphur (B) Low forced draught and fuel bed temperature (C) Thick fire bed and preheated primary air (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Coals used for the generation of producer gas should have (A) High caking index (B) Low fusion point of ash (C) High volatile matter content (D) Very low ash content (8-10%)

Description : Coals used for the generation of producer gas should have (A) High caking index (B) Low fusion point of ash (C) High volatile matter content (D) Very low ash content (8-10%)

Last Answer : (C) High volatile matter content

Pulverised fuel fired furnaces employ __________ fuel firing. (A) Horizontal (B) Vertical (C) Tangential (D) All (A), (B) and (C)

Description : Pulverised fuel fired furnaces employ __________ fuel firing. (A) Horizontal (B) Vertical (C) Tangential (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

During combustion of coal on grate, clinker formation is increased by the (A) Use of thick fire bed (B) Low fusion point of ash (< 1100° C) (C) Use of preheated primary air (D) All (A), (B) & (C)

Description : During combustion of coal on grate, clinker formation is increased by the (A) Use of thick fire bed (B) Low fusion point of ash (< 1100° C) (C) Use of preheated primary air (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Increase in ash content of blast furnace coke (A) Reduces its consumption in the furnace (B) Increases its consumption in the furnace (C) Does not affect its consumption in the furnace (D) Decreases its hardness and abrasion resistance

Description : Increase in ash content of blast furnace coke (A) Reduces its consumption in the furnace (B) Increases its consumption in the furnace (C) Does not affect its consumption in the furnace (D) Decreases its hardness and abrasion resistance

Last Answer : (B) Increases its consumption in the furnace

A coal having higher volatile matter content will necessarily have lower (A) Ash fusion temperature (B) Calorific value (C) Ignition temperature (D) Caking index

Description : A coal having higher volatile matter content will necessarily have lower (A) Ash fusion temperature (B) Calorific value (C) Ignition temperature (D) Caking index

Last Answer : (C) Ignition temperature

A good metallurgical coke should have very low (A) Sulphur & phosphorous content (B) Porosity (C) Fusion point of its ash (D) Hardness & strength

Description : A good metallurgical coke should have very low (A) Sulphur & phosphorous content (B) Porosity (C) Fusion point of its ash (D) Hardness & strength

Last Answer : (A) Sulphur & phosphorous content

Grindability index of a coal is 100. It implies that the (A) Coal can be pulverised with great difficulty (B) Coal can't be pulverised (C) Coal can be easily pulverised (D) Power consumption in grinding the coal will be very high

Description : Grindability index of a coal is 100. It implies that the (A) Coal can be pulverised with great difficulty (B) Coal can't be pulverised (C) Coal can be easily pulverised (D) Power consumption in grinding the coal will be very high

Last Answer : (C) Coal can be easily pulverised

Turndown ratio of a burner gives an idea of the __________ in the furnace. (A) Range of fuel firing rates (B) Volume of the combustion chamber (C) Maximum heat input rate only (D) Minimum heat input rate only

Description : Turndown ratio of a burner gives an idea of the __________ in the furnace. (A) Range of fuel firing rates (B) Volume of the combustion chamber (C) Maximum heat input rate only (D) Minimum heat input rate only

Last Answer : (A) Range of fuel firing rates

Major sources of noise in furnace operation arises from air inspirators, combustion, side wall vibrations and fluctuation in the process heat load. A 50% increase in fuel firing rate may increase the furnace noise level by about __________ decibels. (A) 3 (B) 30(C) 7 (D) 70

Description : Major sources of noise in furnace operation arises from air inspirators, combustion, side wall vibrations and fluctuation in the process heat load. A 50% increase in fuel firing rate may increase the furnace noise level by about __________ decibels. (A) 3 (B) 30 (C) 7 (D) 70

Last Answer : (A) 3

The function of an economiser in a boiler is to preheat the (A) Feedwater (B) Combustion air (C) Pulverised coal (D) Furnace oil

Description : The function of an economiser in a boiler is to preheat the (A) Feedwater (B) Combustion air (C) Pulverised coal (D) Furnace oil

Last Answer : (A) Feedwater

Temperature of preheated air used for the transportation of pulverised coal through pipes to the burner of a boiler furnace is restricted to a maximum limit of about 300° C to avoid the (A) Requirement of large volume combustion chamber (B) Risk of explosion (C) Chances of clinker formation (D) Incomplete combustion of coal

Description : Temperature of preheated air used for the transportation of pulverised coal through pipes to the burner of a boiler furnace is restricted to a maximum limit of about 300° C to avoid the (A) ... chamber (B) Risk of explosion (C) Chances of clinker formation (D) Incomplete combustion of coal

Last Answer : (B) Risk of explosion

Which of the following would require maximum amount of % excess air for complete combustion? (A) Coke oven gas (B) Furnace oil (C) Pulverised coal (D) Lump coal (fixed on chain grate)

Description : Which of the following would require maximum amount of % excess air for complete combustion? (A) Coke oven gas (B) Furnace oil (C) Pulverised coal (D) Lump coal (fixed on chain grate)

Last Answer : (D) Lump coal (fixed on chain grate)

Combustion of pulverised coal compared to the lumpy coal (A) Provides better control of furnace temperature (B) Facilitates combustion with lower excess air (C) Provides higher thermal efficiency & flame temperature (D) All (A), (B) & (C)

Description : Combustion of pulverised coal compared to the lumpy coal (A) Provides better control of furnace temperature (B) Facilitates combustion with lower excess air (C) Provides higher thermal efficiency & flame temperature (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Fat coals' are those coals which have very high (A) Caking capacity (B) Volatile matter content (C) Fusion point of its ash (D) Inherent moisture conten

Description : Fat coals' are those coals which have very high (A) Caking capacity (B) Volatile matter content (C) Fusion point of its ash (D) Inherent moisture conten

Last Answer : (A) Caking capacity

Coal is finally pulverised to 200 mesh size for burning in boilers by a (A) Hammer crusher(B) Ball mill(C) Roll crusher(D) Gyratory crusher

Description : Coal is finally pulverised to 200 mesh size for burning in boilers by a (A) Hammer crusher (B) Ball mill (C) Roll crusher (D) Gyratory crusher

Last Answer : (B) Ball mill

Which of the following fuels is the best for burning on chain grate stoker? (A) Non-caking coal (B) Caking coal (C) Coking coal (D) Pulverised coal

Description : Which of the following fuels is the best for burning on chain grate stoker? (A) Non-caking coal (B) Caking coal (C) Coking coal (D) Pulverised coal

Last Answer : (A) Non-caking coal

In practical operation of any furnace, zero oxygen percentage or theoretical CO2 percentage in flue gas is rarely achieved, because of (A) Use of non-preheated combustion air (B) Use of pulverised solid fuels (C) Imperfect mixing of fuel & air and infiltration of air (D) Use of excessive positive draft in the furnace

Description : In practical operation of any furnace, zero oxygen percentage or theoretical CO2 percentage in flue gas is rarely achieved, because of (A) Use of non-preheated combustion air (B) Use of pulverised solid ... of fuel & air and infiltration of air (D) Use of excessive positive draft in the furnace

Last Answer : (C) Imperfect mixing of fuel & air and infiltration of air

White flue gas (resembling steam) coming out of the chimney of a thermal power plant indicates that the fuel used in the boiler furnace is (A) Tar (B) Coke oven gas (C) Pitch (D) Pulverised coke

Description : White flue gas (resembling steam) coming out of the chimney of a thermal power plant indicates that the fuel used in the boiler furnace is (A) Tar (B) Coke oven gas (C) Pitch (D) Pulverised coke

Last Answer : (B) Coke oven gas

Fusion point of coal ash generally varies from 1000 to 1700° C. Ash having fusion point less than __________ °C is liable to form clinker. (A) 1100 (B) 1250 (C) 1350 (D) 1400

Description : Fusion point of coal ash generally varies from 1000 to 1700° C. Ash having fusion point less than __________ °C is liable to form clinker. (A) 1100 (B) 1250 (C) 1350 (D) 1400

Last Answer : (A) 1100

Which of the following advantages is not associated with the use of preheated air for combustion of a fuel in the furnace? (A) Increase in calorific value of the fuel (B) Increase in flame temperature (C) Reduction in scale losses (D) Saving in fuel consumption

Description : Which of the following advantages is not associated with the use of preheated air for combustion of a fuel in the furnace? (A) Increase in calorific value of the fuel (B) Increase in flame temperature (C) Reduction in scale losses (D) Saving in fuel consumption

Last Answer : (A) Increase in calorific value of the fuel

Combustion of pulverised coal as compared to that of lump coal (A) Develops a non-luminous flame (B) Develops a low temperature flame (C) Can be done with less excess air (D) Provides a lower rate of heat release

Description : Combustion of pulverised coal as compared to that of lump coal (A) Develops a non-luminous flame (B) Develops a low temperature flame (C) Can be done with less excess air (D) Provides a lower rate of heat release

Last Answer : (C) Can be done with less excess ai

A good metallurgical coke (A) Should have high porosity (B) Should be brittle (C) Must contain moderate quantities of ash, moisture, sulphur and volatile matters (D) Should have low fusion point of its ash

Description : A good metallurgical coke (A) Should have high porosity (B) Should be brittle (C) Must contain moderate quantities of ash, moisture, sulphur and volatile matters (D) Should have low fusion point of its ash

Last Answer : (A) Should have high porosity