In IPv4, if the fragment offset hasa value of 100, it means that _______. A) thedatagram has notbeen fragmented B) thedatagram is 100 bytes in size C) thefirst byte of the datagram is byte100 D) the first byteof the datagram is byte800

In IPv4, if the fragment offset hasa value of 100, it means that _______.
A)
thedatagram has notbeen fragmented
B)
thedatagram is 100 bytes in size
C)
thefirst byte of the datagram is byte100
D)
the first byteof the datagram is byte800
by

1 Answer

Answer :

the first byteof the datagram is byte800
by

Related questions

An IPv4 datagram is fragmented into three smaller datagrams. Which of the following is true? A. The do not fragment bit is set to 1 for all three datagrams. B. The more fragment bit is set to 0 for all three datagrams C. The identification field is the same for all three datagrams. D. The offset field is the same for all three datagrams

Description : An IPv4 datagram is fragmented into three smaller datagrams. Which of the following is true? A. The do not fragment bit is set to 1 for all three datagrams. B. The more fragment bit is set to 0 ... field is the same for all three datagrams. D. The offset field is the same for all three datagrams

Last Answer : C. The identification field is the same for all three datagrams.

In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the first and the last bytes of the payload, respectively are a. Last fragment, 2400 and 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Description : In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the ... 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Last Answer : c. Last fragment, 2400 and 2759

In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the first and the last bytes of the payload, respectively are a. Last fragment, 2400 and 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Description : In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the ... 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Last Answer : c. Last fragment, 2400 and 2759

In IPv4, which field or bit value unambiguously identifies thedatagram as a fragment? A) Donot fragment bit ?0 B) More Fragment bit ?0 C) Fragment offset = 1000 D) noneof the above

Description : In IPv4, which field or bit value unambiguously identifies thedatagram as a fragment? A) Donot fragment bit ?0 B) More Fragment bit ?0 C) Fragment offset = 1000 D) noneof the above

Last Answer : Fragment offset = 1000

An IPv4 datagram is fragmented into three smaller datagrams. Which of the following is true? A) Thedo not fragment bit is set to 1 for all three datagrams. B) The more fragment bit is set to 0 forall three datagrams. C) Theidentification fieldis the same for all three datagramsD)Theoffset field is thesame for all three datagrams.

Description : An IPv4 datagram is fragmented into three smaller datagrams. Which of the following is true? A) Thedo not fragment bit is set to 1 for all three datagrams. B) The more fragment bit ... Theidentification fieldis the same for all three datagrams. D) Theoffset field is thesame for all three datagrams

Last Answer : Theidentification fieldis the same for all three datagrams.

In IPv4, what is needed to determine thenumber of the last byte of a fragment? A) Identification number B) Offset number C) Total length D) (b) and (c)

Description : In IPv4, what is needed to determine thenumber of the last byte of a fragment? A) Identification number B) Offset number C) Total length D) (b) and (c)

Last Answer : (b) and (c)

In IPv4 header, the field is needed to allow the destination host to determine which datagram a newly arrived fragment belongs to. (A) identification (B) fragment offset (C) time to live (D) header checksum

Description : In IPv4 header, the field is needed to allow the destination host to determine which datagram a newly arrived fragment belongs to. (A) identification (B) fragment offset (C) time to live (D) header checksum

Last Answer : (A) identification

Which of the following fields in IPv4 datagram is not related to fragmentation? (A) Type of service (B) Fragment offset (C) Flags (D) Identification

Description : Which of the following fields in IPv4 datagram is not related to fragmentation? (A) Type of service (B) Fragment offset (C) Flags (D) Identification

Last Answer : (A) Type of service 

The maximum length (in bytes) of an IPv4 datagram is? A. 32 B. 1024 C. 65535 D. 512

Description : The maximum length (in bytes) of an IPv4 datagram is? A. 32 B. 1024 C. 65535 D. 512

Last Answer : C. 65535

In IPv4 header, an HLEN value of decimal 10 means _______ A. there are 10 bytes of options B. there are 40 bytes of optionsC. there are 10 bytes in the header D. there are 40 bytes in the header

Description : In IPv4 header, an HLEN value of decimal 10 means _______ A. there are 10 bytes of options B. there are 40 bytes of options C. there are 10 bytes in the header D. there are 40 bytes in the header

Last Answer : D. there are 40 bytes in the header

The IPv4 header size _______ A. is 20 to 60 bytes long B. is always 20 bytes long C. is always 60 bytes long D. depends on the MTU

Description : The IPv4 header size _______ A. is 20 to 60 bytes long B. is always 20 bytes long C. is always 60 bytes long D. depends on the MTU

Last Answer : A. is 20 to 60 bytes long

In IPv4, when a datagram is encapsulated in a frame, the total sizeof the datagram must beless thanthe _______. A) MUT B) MAT C) MTU D) noneof the above

Description : In IPv4, when a datagram is encapsulated in a frame, the total sizeof the datagram must beless thanthe _______. A) MUT B) MAT C) MTU D) noneof the above

Last Answer : MTU

A best-effort delivery service suchas IPv4 includes _______. A) error checking B) error correction C) datagram acknowledgment D) noneof the above

Description : A best-effort delivery service suchas IPv4 includes _______. A) error checking B) error correction C) datagram acknowledgment D) noneof the above

Last Answer : noneof the above

An IP datagram of size 1000 bytes arrives at a router. The router has to forward this packet on a link whose MTU (maximum transmission unit) is 100 bytes. Assume that the size of the IP header is 20 bytes. The number of fragments that the IP datagram will be divided into for transmission is : a. 10 b. 50 c. 12 d. 13

Description : An IP datagram of size 1000 bytes arrives at a router. The router has to forward this packet on a link whose MTU (maximum transmission unit) is 100 bytes. Assume that the size of the IP header is 20 bytes ... the IP datagram will be divided into for transmission is : a. 10 b. 50 c. 12 d. 13

Last Answer : d. 13

What is the size of the ‘total length’ field in IPv4 datagram? a. 4 bit b. 8 bit c. 16 bit d. 32 bit

Description : What is the size of the ‘total length’ field in IPv4 datagram? a. 4 bit b. 8 bit c. 16 bit d. 32 bit

Last Answer : c. 16 bit

Which of the following technique isused for fragment? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets B. a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame C. one of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Description : Which of the following technique isused for fragment? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets B. a technique used by protocols in which a lower level protocol ... network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Last Answer : one of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size

Header of datagram in IPv4 has _________ a) 0 to 20 bytes b) 20 to 40 bytes c) 20 to 60 bytes d) 20 to 80 bytes

Description : Header of datagram in IPv4 has _________ a) 0 to 20 bytes b) 20 to 40 bytes c) 20 to 60 bytes d) 20 to 80 bytes

Last Answer : c) 20 to 60 bytes

Which of the following is not a field in TCP header? a. Sequence number b. Fragment offset c. Checksum d. Window size

Description : Which of the following is not a field in TCP header? a. Sequence number b. Fragment offset c. Checksum d. Window size

Last Answer : b. Fragment offset

In IPv4, what is the value of the total length field in bytes if the header is 28 bytes and the data field is 400bytes? A) 428 B) 407 C) 107 D) 427

Description : In IPv4, what is the value of the total length field in bytes if the header is 28 bytes and the data field is 400bytes? A) 428 B) 407 C) 107 D) 427

Last Answer : 428

In IPv4 header, an HLEN value of decimal 10 means_______. A) there are 10bytes ofoptions B) there are 40bytes ofoptions C) there are 10bytes inthe header D) thereare 40 bytes in the header

Description : In IPv4 header, an HLEN value of decimal 10 means_______. A) there are 10bytes ofoptions B) there are 40bytes ofoptions C) there are 10bytes inthe header D) thereare 40 bytes in the header

Last Answer : thereare 40 bytes in the header

Which of the following is true about ICMP messages? A) An ICMP error message may be generated for an ICMP error message. B) An ICMP error message may be generated only for the first fragment. C) An ICMP error message may be generated for a multicast datagram. D) noneis true

Description : Which of the following is true about ICMP messages? A) An ICMP error message may be generated for an ICMP error message. B) An ICMP error message may be generated only for the first fragment. C) An ICMP error message may be generated for a multicast datagram. D) noneis true

Last Answer : An ICMP error message may be generated only for the first fragmen

n IPv4,an HLEN value ofdecimal10 means _______. A) there are 10bytes ofoptions B) there are 40bytes ofoptions C) there are 40bytes inthe header D) noneof the above

Description : n IPv4,an HLEN value ofdecimal10 means _______. A) there are 10bytes ofoptions B) there are 40bytes ofoptions C) there are 40bytes inthe header D) noneof the above

Last Answer : there are 40bytes inthe header

Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is __________. a. 400 bps b. 800 bps c. 1600 bps d. 3200 bps

Description : Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is __________. a. 400 bps b. 800 bps c. 1600 bps d. 3200 bps

Last Answer : d. 3200 bps

Which of the following is true about ICMP messages? A) An ICMP error message may be generated for an ICMP error message. B) An ICMP error message may be generated for each fragment. C) An ICMP error message may be generated for a multicast datagram. D) noneis true

Description : Which of the following is true about ICMP messages? A) An ICMP error message may be generated for an ICMP error message. B) An ICMP error message may be generated for each fragment. C) An ICMP error message may be generated for a multicast datagram. D) noneis true

Last Answer : noneis true

In the TCP/IP protocol suite, which one of the following is NOT part of the IP header? a. Fragment Offset b. Source IP address c. Destination IP address d. Destination port number

Description : In the TCP/IP protocol suite, which one of the following is NOT part of the IP header? a. Fragment Offset b. Source IP address c. Destination IP address d. Destination port number

Last Answer : d. Destination port number

Fast Ethernet hasa data rate of ________Mbps. A) 10 B) 100 C) 1000 D) 10,000

Description : Fast Ethernet hasa data rate of ________Mbps. A) 10 B) 100 C) 1000 D) 10,000

Last Answer : 100

A UDP datagram of _____ bytes is acceptable to all implementations A. 516 B. 1024 C. 256 D. 512

Description : A UDP datagram of _____ bytes is acceptable to all implementations A. 516 B. 1024 C. 256 D. 512

Last Answer : A. 516

In Frame Relay, the EA field defines thenumber of bytes; it is _____ in the last byte of the address. A) 0 B) 1 C) 2 D) 3

Description : In Frame Relay, the EA field defines thenumber of bytes; it is _____ in the last byte of the address. A) 0 B) 1 C) 2 D) 3

Last Answer : 1

In_______encoding, the duration of the bit is divided into twohalves. Thevoltage remains at one level during thefirst half and moves to the other level in the second half. The transition at the middle of the bit provides synchronization. A) Manchester B) differential ManchesteC) both (a) and (b) D) neither (a) nor (b)r

Description : In_______encoding, the duration of the bit is divided into twohalves. Thevoltage remains at one level during thefirst half and moves to the other level in the second half. The transition at the middle of the bit ... Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : both (a) and (b)

The IPv4header size _______. A) is 20 to 60 bytes long B) is 20 bytes long C) is 60 bytes long D) noneof the above

Description : The IPv4header size _______. A) is 20 to 60 bytes long B) is 20 bytes long C) is 60 bytes long D) noneof the above

Last Answer : is 20 to 60 bytes long

The IPv4header size _______. A) is 20 to 60 bytes long B) is always 20bytes long C) is always 60bytes long D) depends on the MTU

Description : The IPv4header size _______. A) is 20 to 60 bytes long B) is always 20bytes long C) is always 60bytes long D) depends on the MTU

Last Answer : is 20 to 60 bytes long

In IPv4, what is the value of the total length field in bytes if the header is 28 bytes and the data field is 400 bytes?

Description : In IPv4, what is the value of the total length field in bytes if the header is 28 bytes and the data field is 400 bytes?

Last Answer : 428

In IPv4, class _______ has the greatestnumber of addresses in eachblock. A) A B) B C) C D) D

Description : In IPv4, class _______ has the greatestnumber of addresses in eachblock. A) A B) B C) C D) D

Last Answer : A

An IPv4 address consistsof _______ bits. A) 4 B) 8 C) 32 D) 64

Description : An IPv4 address consistsof _______ bits. A) 4 B) 8 C) 32 D) 64

Last Answer : 32

A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of an acknowledgement is 100 bytes and the transmission rate at the receiver is 8 Kbps. The one-way propagation delay is 100 milliseconds. Assuming no frame is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Last Answer : a. 2500

Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Description : Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Last Answer : d. 20000

In IPv4 layer, datagram is of ________ a) Fixed length b) Variable length c) Global length d) Zero length

Description : In IPv4 layer, datagram is of ________ a) Fixed length b) Variable length c) Global length d) Zero length

Last Answer : b) Variable length

In version field of IPv4 header, when machine is using some other version of IPv4 then datagram is __________ a) Discarded b) Accepted c) Interpreted d) Interpreted incorrectly

Description : In version field of IPv4 header, when machine is using some other version of IPv4 then datagram is __________ a) Discarded b) Accepted c) Interpreted d) Interpreted incorrectly

Last Answer : a) Discarded

Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is ............... (A) 400 bps (B) 800 bps (C) 1600 bps (D) 3200 bps

Description : Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is ............... (A) 400 bps (B) 800 bps (C) 1600 bps (D) 3200 bps

Last Answer : (D) 3200 bps Answer: D Explanation: The multiplexer is shown in the Figure. Each frame carries 1 byte from each channel; the size of each frame, therefore, is 4 bytes, or 32 bits. Because each ... channel, the frame rate must be 100 frames per second. The bit rate is 100 32 = 3200 bps. 

A switched WAN is normally implemented as a _______ network. A) virtual-circuitB) datagram C) circuit-switched D) none of the above

Description : A switched WAN is normally implemented as a _______ network. A) virtual-circuit B) datagram C) circuit-switched D) none of the above

Last Answer : virtual-circuit

In _______ there are no setup or teardown phases. A) datagram switching B) circuit switching C) frame switching D) none of the above

Description : In _______ there are no setup or teardown phases. A) datagram switching B) circuit switching C) frame switching D) none of the above

Last Answer : datagram switching

In _______, the resources need to bereserved during the setup phase; the resources remain dedicated for the entire durationof data transfer phase until the teardownphase. A) datagram switching B) circuit switching C) frame switching D) none of the above

Description : In _______, the resources need to bereserved during the setup phase; the resources remain dedicated for the entire durationof data transfer phase until the teardownphase. A) datagram switching B) circuit switching C) frame switching D) none of the above

Last Answer : circuit switching

In IPv6, when a datagram needs tobediscarded ina congested network, the decision is basedon the _______ field in thebase header. A) hop limit B) priority C) nextheader D) noneof the above

Description : In IPv6, when a datagram needs tobediscarded ina congested network, the decision is basedon the _______ field in thebase header. A) hop limit B) priority C) nextheader D) noneof the above

Last Answer : priority

In IPv6, the _______ field inthe baseheader restricts the lifetime ofa datagram. A) version B) next-header C) hoplimit D) neighbor-advertisemen

Description : In IPv6, the _______ field inthe baseheader restricts the lifetime ofa datagram. A) version B) next-header C) hoplimit D) neighbor-advertisemen

Last Answer : hoplimit

The number of network segments on which the datagram is allowed to travel before a router should discard it is called _______. A. Time to Live (TTL) B. Time to Die(TTD) C. self recognition D. both a and b

Description : The number of network segments on which the datagram is allowed to travel before a router should discard it is called _______. A. Time to Live (TTL) B. Time to Die(TTD) C. self recognition D. both a and b

Last Answer : A. Time to Live (TTL)

An integer takes a storage size of (a) 2 bytes (b) 1 byte -Technology

Description : An integer takes a storage size of (a) 2 bytes (b) 1 byte -Technology

Last Answer : (a) An integer takes a storage size of 2 bytes.

In a packet switching network, if the message size is 48 bytes and each packet contains a header of 3 bytes. If 24 packets are required to transmit the message, the packet size is ................ (1) 2 bytes (2) 1 byte (3) 4 bytes (4) 5 bytes

Description : In a packet switching network, if the message size is 48 bytes and each packet contains a header of 3 bytes. If 24 packets are required to transmit the message, the packet size is ................ (1) 2 bytes (2) 1 byte (3) 4 bytes (4) 5 bytes

Last Answer : (4) 5 bytes 

Each station on an Ethernet network has a unique _______ address imprinted onits network interface card (NIC). A) 5-byte B) 32-bit C) 48-bit D) none of the above

Description : Each station on an Ethernet network has a unique _______ address imprinted onits network interface card (NIC). A) 5-byte B) 32-bit C) 48-bit D) none of the above

Last Answer : 48-b

High-level Data Link Control (HDLC) is a _______ protocol for communication over point-to-pointand multipoint links. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above

Description : High-level Data Link Control (HDLC) is a _______ protocol for communication over point-to-pointand multipoint links. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above

Last Answer : bit-oriented

Inasynchronous transmission, the gap time between bytes is _______. A) fixed B) variable C) afunctionof the data rate D) zero

Description : Inasynchronous transmission, the gap time between bytes is _______. A) fixed B) variable C) afunctionof the data rate D) zero

Last Answer : variable