The IPv4header size _______.
A)
is 20 to 60 bytes long
B)
is always 20bytes long
C)
is always 60bytes long
D)
depends on the MTU

1 Answer

Answer :

is 20 to 60 bytes long

Related questions

Description : The IPv4 header size _______ A. is 20 to 60 bytes long B. is always 20 bytes long C. is always 60 bytes long D. depends on the MTU

Last Answer : A. is 20 to 60 bytes long

Description : The IPv4header size _______. A) is 20 to 60 bytes long B) is 20 bytes long C) is 60 bytes long D) noneof the above

Last Answer : is 20 to 60 bytes long

Description : An IP datagram of size 1000 bytes arrives at a router. The router has to forward this packet on a link whose MTU (maximum transmission unit) is 100 bytes. Assume that the size of the IP header is 20 bytes ... the IP datagram will be divided into for transmission is : a. 10 b. 50 c. 12 d. 13

Last Answer : d. 13

Description : The IPv4header field formerly knownas the service type field is now calledthe _______ field. A) IETF B) checksum C) differentiatedservices D) noneof the above

Last Answer : differentiatedservices

Description : In IPv4, when a datagram is encapsulated in a frame, the total sizeof the datagram must beless thanthe _______. A) MUT B) MAT C) MTU D) noneof the above

Last Answer : MTU

Description : In IPv4, if the fragment offset hasa value of 100, it means that _______. A) thedatagram has notbeen fragmented B) thedatagram is 100 bytes in size C) thefirst byte of the datagram is byte100 D) the first byteof the datagram is byte800

Last Answer : the first byteof the datagram is byte800

Description : Inasynchronous transmission, the gap time between bytes is _______. A) fixed B) variable C) afunctionof the data rate D) zero

Last Answer : variable

Description : In IPv4 header, an HLEN value of decimal 10 means _______ A. there are 10 bytes of options B. there are 40 bytes of options C. there are 10 bytes in the header D. there are 40 bytes in the header

Last Answer : D. there are 40 bytes in the header

Description : An ACK number of 1000 in TCP always means that a. 999 bytes have been successfully received b. 1000 bytes have been successfully received c. 1001 bytes have been successfully received d. None of the above

Last Answer : d. None of the above

Description : What is the maximum size of data that the application layer can pass on to the TCP layer below? a. Any size b. 216 bytes - size of TCP header c. 216 bytes d. 1500

Last Answer : a. Any size

Description : The minimum frame size required for a CSMA/CD based computer network running at 1 Gbps on a 200m cable with a link speed of 2 × 108m/s is a. 125 bytes b. 250 bytes c. 500 bytes d. None of these

Last Answer : b. 250 bytes

Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Last Answer : a. 2500

Description : Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Last Answer : d. 20000

Description : Header of datagram in IPv4 has _________ a) 0 to 20 bytes b) 20 to 40 bytes c) 20 to 60 bytes d) 20 to 80 bytes

Last Answer : c) 20 to 60 bytes

Description : The term gigabyte refers to a. 1024 bytes b. 1024 kilobytes c. 1024 megabytes d. 1024 gigabyte

Last Answer : 1024 megabytes

Description : The term gigabyte refers to a. 1024 bytes b. 1024 kilobytes c. 1024 megabytes d. 1024 gigabyte

Last Answer : 1024 megabytes

Description : Which of the following is true? a. Fields are composed of bytes b. Records are composed of fields c. Fields are composed of characters d. All of above

Last Answer : All of above

Description : Which statement is valid? a. 1KB = 1024 bytes b. 1 MB=2048 bytes c. 1 MB = 1000 kilobytes d. 1 KB = 1000 bytes

Last Answer : 1KB = 1024 bytes

Description : The maximum frame length for 10-Mbps Ethernet is ________ bytes. A) 1518 B) 1500 C) 1200 D) none of the abov

Last Answer : 1518

Description : In SONET, for each frame, the bytes are transmitted __________. A) from left to the right, top to bottom B) from right to theleft, bottom to top C) from left to the right, bottom to top D) from right to the left, top to bottom

Last Answer : from left to the right, bottom to top

Description : In Frame Relay, the EA field defines thenumber of bytes; it is _____ in the last byte of the address. A) 0 B) 1 C) 2 D) 3

Last Answer : 1

Description : In Frame Relay, an address can be________ bytes. A) only 2 B) 2 to 3 C) 2 to 4 D) none of the above

Last Answer : 2 to 4

Description : In IPv4, what is the value of the total length field in bytes if the header is 28 bytes and the data field is 400bytes? A) 428 B) 407 C) 107 D) 427

Last Answer : 428

Description : In IPv4 header, an HLEN value of decimal 10 means_______. A) there are 10bytes ofoptions B) there are 40bytes ofoptions C) there are 10bytes inthe header D) thereare 40 bytes in the header

Last Answer : thereare 40 bytes in the header

Description : What is the commonly used unit for measuring the speed of data transmission? A) Bytes per second B) Baud C) Bits per second D) Both B and C

Last Answer : B) Baud

Description : Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is __________. a. 400 bps b. 800 bps c. 1600 bps d. 3200 bps

Last Answer : d. 3200 bps

Description : In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the ... 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Last Answer : c. Last fragment, 2400 and 2759

Description : In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the ... 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Last Answer : c. Last fragment, 2400 and 2759

Description : The network layer is concerned with __________ of data. a. bits b. frames c. packets d. bytes

Last Answer : c. packets

Description : How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Last Answer : b. 12,000 bytes

Description : Header of a frame generally contains a. synchronization bytes b. addresses c. frame identifier d. all of the mentioned

Last Answer : d. all of the mentioned

Description : A UDP datagram of _____ bytes is acceptable to all implementations A. 516 B. 1024 C. 256 D. 512

Last Answer : A. 516

Description : The network layer encapsulates the data into _______of data. A. bits B. frames C. packets D. bytes

Last Answer : C. packets

Description : The maximum length (in bytes) of an IPv4 datagram is? A. 32 B. 1024 C. 65535 D. 512

Last Answer : C. 65535

Description : Header of a Layer two frame usually contain ______________ A. synchronization bytes B. addresses C. frame identifier D. all of the mentioned

Last Answer : D. all of the mentioned

Description : The network layer is concerned with __________ of data. a) bits b) frames c) packets d) bytes

Last Answer : c) packets

Description : On which factors do the size of block depends in classless addressing? a. Nature & size of an entity b. Number of addresses c. Availability of the address space d. All of the above

Last Answer : a. Nature & size of an entity

Description : The maximum size of the window in a Sliding Window Protocol is _______ A. 2m – 1 B. 2m + 1 C. 2m D. 2m-1

Last Answer : A. 2m – 1

Description : In _______ framing, there is no need for defining the boundaries of frames. A. fixed-size B. variable-size C. standard D. none of the above

Last Answer : A. fixed-size

Description : Based onthe Clos criteria, if N = 200, then the minimum number of crosspoints isgreater thanor equal to _______. A) 15,200 B) 18,000 C) 42,000 D) 20,000

Last Answer : 15,200

Description : In SONET each frame lasts _______ microseconds. A) 20 B) 64 C) 128 D) none of the above

Last Answer : 64

Description : 1 Kilobyte (KB) is _______: a) 1000 bits b) 1 Kilo KB c) Both (a) and (b) d) 1024 Bytes e) None of The Above

Last Answer : d) 1024 Bytes

Description : The network layer is considered as the _______? A. Backbone B. packets C. Bytes D. bits 

Last Answer : A. Backbone  

Description : The order of a leaf node in a B+ tree is the maximum number of children it can have. Suppose that block size is 1 kilobytes, the child pointer takes 7 bytes long and search field value takes 14 bytes long. The order of the leaf node is ............ (1) 16 (2) 63 (3) 64 (4) 65

Last Answer : Answer: All

Description : Station A uses 32 byte packets to transmit messages to Station B using a sliding window protocol. The round trip delay between A and B is 80 milliseconds and the bottleneck bandwidth on the path between A and B ... What is the optimal window size that A should use? a. 20 b. 40 c. 160 d. 320

Last Answer : b. 40

Description : An integer takes a storage size of (a) 2 bytes (b) 1 byte -Technology

Last Answer : (a) An integer takes a storage size of 2 bytes.

Description : Write the memory capacity (storage size) of short and float data type in bytes

Last Answer : Ans. short data type is of 2 bytes and float is of 4 bytes

Description : How much space will be required to store the bit map of a 1.3 GB disk with 512 bytes block size ? (A) 332.8 KB (B) 83.6 KB (C) 266.2 KB (D) 256.6 KB

Last Answer : (A) 332.8 KB

Description : For the implementation of a paging scheme, suppose the average process size be x bytes, the page size be y bytes, and each page entry requires z bytes. The optimum page size that minimizes the total overhead due to the page ... fragmentation loss is given by (A) x/2 (B) xz/2 (C) √2xz (D) (√xz)/2

Last Answer : (C) √2xz 

Description : A memory management system has 64 pages with 512 bytes page size. Physical memory consists of 32 page frames. Number of bits required in logical and physical address are respectively: (1) 14 and 15 (2) 14 and 29 (3) 15 and 14 (4) 16 and 32

Last Answer : (3) 15 and 14