Fast Ethernet hasa data rate of ________Mbps. A) 10 B) 100 C) 1000 D) 10,000

Fast Ethernet hasa data rate of ________Mbps.
A)
10
B)
100
C)
1000
D)
10,000
by

1 Answer

Answer :

100
by

Related questions

Gigabit Ethernet has a datarate of________Mbps. A) 10 B) 100 C) 1000 D) 10,000

Description : Gigabit Ethernet has a datarate of________Mbps. A) 10 B) 100 C) 1000 D) 10,000

Last Answer : 1000

Determine the maximum length of the cable (in km) for transmitting data at a rate of 500 Mbps in an Ethernet LAN with frames of size 10,000 bits. Assume the signal speed in the cable to be 2,00,000 km/s.b. 2 c. 2.5 d. 5

Description : Determine the maximum length of the cable (in km) for transmitting data at a rate of 500 Mbps in an Ethernet LAN with frames of size 10,000 bits. Assume the signal speed in the cable to be 2,00,000 km/s. b. 2 c. 2.5 d. 5

Last Answer : b. 2

In IPv4, if the fragment offset hasa value of 100, it means that _______. A) thedatagram has notbeen fragmented B) thedatagram is 100 bytes in size C) thefirst byte of the datagram is byte100 D) the first byteof the datagram is byte800

Description : In IPv4, if the fragment offset hasa value of 100, it means that _______. A) thedatagram has notbeen fragmented B) thedatagram is 100 bytes in size C) thefirst byte of the datagram is byte100 D) the first byteof the datagram is byte800

Last Answer : the first byteof the datagram is byte800

is the predominant form of Fast Ethernet, and runs over two pairs of category 5 or above cable. a. 100 BASE-T b. 100 BASE-TX c. 100 BASE-T4 d. 100 BASE-T2

Description : is the predominant form of Fast Ethernet, and runs over two pairs of category 5 or above cable. a. 100 BASE-T b. 100 BASE-TX c. 100 BASE-T4 d. 100 BASE-T2

Last Answer : b. 100 BASE-TX

………………….. is a collective term for a number of Ethernet Standards that carry traffic at the nominal rate of 1000 Mbit/s against the original Ethernet speed of 10 Mbit/s. A) Ethernet B) Fast Ethernet C) Gigabit Ethernet D) All of the above

Description : ………………….. is a collective term for a number of Ethernet Standards that carry traffic at the nominal rate of 1000 Mbit/s against the original Ethernet speed of 10 Mbit/s. A) Ethernet B) Fast Ethernet C) Gigabit Ethernet D) All of the above

Last Answer : B) Fast Ethernet

............ is a collective term for a number of Ethernet Standards that carry traffic at the nominal rate of 1000 Mbits/s against the original Ethernet speed of 10 Mbit/s. A) Ethernet B) Fast Ethernet C) Gigabit Ethernet D) All of the above

Description : ............ is a collective term for a number of Ethernet Standards that carry traffic at the nominal rate of 1000 Mbits/s against the original Ethernet speed of 10 Mbit/s. A) Ethernet B) Fast Ethernet C) Gigabit Ethernet D) All of the above

Last Answer : B) Fast Ethernet

is a collective term for a number of Ethernet Standards that carry traffic at the nominal rate of 1000 Mbits/s against the original Ethernet speed of 10 Mbit/s. A) Ethernet B) Fast Ethernet C) Gigabit Ethernet D) All of the above

Description : is a collective term for a number of Ethernet Standards that carry traffic at the nominal rate of 1000 Mbits/s against the original Ethernet speed of 10 Mbit/s. A) Ethernet B) Fast Ethernet C) Gigabit Ethernet D) All of the above

Last Answer : B) Fast Ethernet

In a fast Ethernet cabling, 100 Base-TX uses ........... cable and maximum segment size is ............ (A) twisted pair, 100 metres (B) twisted pair, 200 metres (C) fibre optics, 1000 metres (D) fibre optics, 2000 metres

Description : In a fast Ethernet cabling, 100 Base-TX uses ........... cable and maximum segment size is ............ (A) twisted pair, 100 metres (B) twisted pair, 200 metres (C) fibre optics, 1000 metres (D) fibre optics, 2000 metres

Last Answer : (A) twisted pair, 100 metres

IEEE 802.3ab defines Gigabit Ethernet transmission over unshieldedtwisted pair (UTP) category 5, 5e or 6 cabling known as .................... a. 1000 BASE-T b. 1000 BASE-SX c. 1000 BASE-LX d. 1000 BASE-CX

Description : IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5, 5e or 6 cabling known as .................... a. 1000 BASE-T b. 1000 BASE-SX c. 1000 BASE-LX d. 1000 BASE-CX

Last Answer : a. 1000 BASE-T

In _________, autonegotiation allows two devices to negotiate the mode or datarate of operation. A) Standard B) Fast Ethernet C) Gigabit Ethernet D) Ten-Gigabit Ethernet

Description : In _________, autonegotiation allows two devices to negotiate the mode or datarate of operation. A) Standard B) Fast Ethernet C) Gigabit Ethernet D) Ten-Gigabit Ethernet

Last Answer : Fast Ethernet

Differentiate fast Ethernet and gigabit Ethernet.

Description : Differentiate fast Ethernet and gigabit Ethernet.

Last Answer : 00-Mbps version called Fast Ethernet. 1000-Mbps version called Gigabit Ethernet. Both 100-Mbps and 1000-Mbps Ethernets are designed to be used in full-duplex, point-to-point configurations, which mean that they are typically used in switched networks.

In a telephone system, the customer’s telephone directory numbering is from 000 to 999, what is the capacity of the system? A. 1000 lines B. 100,000 lines C. D. 100 lines lines

Description : In a telephone system, the customer’s telephone directory numbering is from 000 to 999, what is the capacity of the system? A. 1000 lines B. 100,000 lines C. 10,000 lines D. 100 lines

Last Answer : A. 1000 lines

Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Description : Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Last Answer : d. 256

The maximum length of a "thick" Ethernet cable is ……….. A. 100 meters B. 200 meters C. 500 meters D. 1000meters

Description : The maximum length of a "thick" Ethernet cable is ……….. A. 100 meters B. 200 meters C. 500 meters D. 1000meters

Last Answer : C. 500 meters

In Ethernet when Manchester encoding is used, the bit rate is: a. Half the baud rate. b. Twice the baud rate. c. Same as the baud rate. d. None of the above

Description : In Ethernet when Manchester encoding is used, the bit rate is: a. Half the baud rate. b. Twice the baud rate. c. Same as the baud rate. d. None of the above

Last Answer : a. Half the baud rate.

The _______ layer of Ethernet consistsof the LLC sublayer and the MAC sublayer. A) data link B) physical C) network D) none of the above

Description : The _______ layer of Ethernet consistsof the LLC sublayer and the MAC sublayer. A) data link B) physical C) network D) none of the above

Last Answer : data link

Which of the following is a data link protocol? a. ethernet b. point to point protocol c. hdlc d. all of the mentioned

Description : Which of the following is a data link protocol? a. ethernet b. point to point protocol c. hdlc d. all of the mentioned

Last Answer : d. all of the mentioned

How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Description : How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Last Answer : b. 12,000 bytes

A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of an acknowledgement is 100 bytes and the transmission rate at the receiver is 8 Kbps. The one-way propagation delay is 100 milliseconds. Assuming no frame is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Last Answer : a. 2500

Standard Ethernet (10-Mbps) uses_______ encoding A) NRZ B) AMI C) Manchester D) differential Manchester

Description : Standard Ethernet (10-Mbps) uses_______ encoding A) NRZ B) AMI C) Manchester D) differential Manchester

Last Answer : Manchester

The maximum frame length for 10-Mbps Ethernet is ________ bytes. A) 1518 B) 1500 C) 1200 D) none of the abov

Description : The maximum frame length for 10-Mbps Ethernet is ________ bytes. A) 1518 B) 1500 C) 1200 D) none of the abov

Last Answer : 1518

The minimum frame length for 10-Mbps Ethernet is _______bytes. A) 32 B) 80 C) 128 D) none of the above

Description : The minimum frame length for 10-Mbps Ethernet is _______bytes. A) 32 B) 80 C) 128 D) none of the above

Last Answer : none of the above

The IEEE 802.3 Standard defines _________ CSMA/CD as the access method for first-generation 10-Mbps Ethernet. A) 1-persistent B) p-persistent C) non-persistent D) none of the above

Description : The IEEE 802.3 Standard defines _________ CSMA/CD as the access method for first-generation 10-Mbps Ethernet. A) 1-persistent B) p-persistent C) non-persistent D) none of the above

Last Answer : 1-persistent

Which of the following couldnot be an Ethernet multicast destination? A) B7:7B:6C:DE:10:00 B) 7B:AA:C1:23:45:32 C) 7C:56:21:1A:DE:F4 D) 83:32:21:21:4D:34

Description : Which of the following couldnot be an Ethernet multicast destination? A) B7:7B:6C:DE:10:00 B) 7B:AA:C1:23:45:32 C) 7C:56:21:1A:DE:F4 D) 83:32:21:21:4D:34

Last Answer : 7C:56:21:1A:DE:F4

Which of the following couldnot be an Ethernet unicast destination? A) 43:7B:6C:DE:10:00 B) 44:AA:C1:23:45:32 C) 46:56:21:1A:DE:F4 D) 48:32:21:21:4D:34

Description : Which of the following couldnot be an Ethernet unicast destination? A) 43:7B:6C:DE:10:00 B) 44:AA:C1:23:45:32 C) 46:56:21:1A:DE:F4 D) 48:32:21:21:4D:34

Last Answer : 43:7B:6C:DE:10:0

Suppose the round trip propagation delay for a 10 Mbps Ethernet having 48-bit jamming signal is 46.4 ms. The minimum frame size is a. 94 b. 416 c. 464

Description : Suppose the round trip propagation delay for a 10 Mbps Ethernet having 48-bit jamming signal is 46.4 ms. The minimum frame size is a. 94 b. 416 c. 464

Last Answer : c. 464

.......... is the predominant form of Fast Ethernet, and runs over two pairs of category 5 or above cable. A) 100 BASE-T B) 100 BASE-TX C) 100 BASE-T4

Description : .......... is the predominant form of Fast Ethernet, and runs over two pairs of category 5 or above cable. A) 100 BASE-T B) 100 BASE-TX C) 100 BASE-T4

Last Answer : B) 100 BASE-TX

s the predominant form of Fast Ethernet, and runs over two pairs of category 5 or above cable. A) 100 BASE-T B) 100 BASE-TX C) 100 BASE-T4 D) 100 BASE-T2

Description : s the predominant form of Fast Ethernet, and runs over two pairs of category 5 or above cable. A) 100 BASE-T B) 100 BASE-TX C) 100 BASE-T4 D) 100 BASE-T2

Last Answer : B) 100 BASE-TX

Maximum data transfer rate of the optical fiber is……….? a. 50 kbps b. 1000 kbps c. 1000 Mbps d. None of the these

Description : Maximum data transfer rate of the optical fiber is……….? a. 50 kbps b. 1000 kbps c. 1000 Mbps d. None of the these

Last Answer : c. 1000 Mbps

Hasa Al-Khadr Vegetable Soup

Description : Hasa Al-Khadr Vegetable Soup

Last Answer : Hasa Al-Khadr Vegetable Soup 2 Tbs olive oil 2 medium carrots, peeled and chopped into small pieces 1 large onion, chopped 2 cloves garlic, crushed 2 Tbs grated fresh ginger 2 medium potatoes, ... to boil. Cover and simmer over medium-low heat for 1 hour or until the vegetables are well-done.

Which of the following arevalid Minimum and Maximum zoom sizes in MSOffice? A. 10, 100 B. 20,250 C. 10, 500 D. 10,1000

Description : Which of the following arevalid Minimum and Maximum zoom sizes in MSOffice? A. 10, 100 B. 20,250 C. 10, 500 D. 10,1000

Last Answer : 10, 500

An IP datagram of size 1000 bytes arrives at a router. The router has to forward this packet on a link whose MTU (maximum transmission unit) is 100 bytes. Assume that the size of the IP header is 20 bytes. The number of fragments that the IP datagram will be divided into for transmission is : a. 10 b. 50 c. 12 d. 13

Description : An IP datagram of size 1000 bytes arrives at a router. The router has to forward this packet on a link whose MTU (maximum transmission unit) is 100 bytes. Assume that the size of the IP header is 20 bytes ... the IP datagram will be divided into for transmission is : a. 10 b. 50 c. 12 d. 13

Last Answer : d. 13

A device is sending out data at the rate of 2000 bps. How long does it take to send a file of 1,00,000 characters ? a. 50 b. 200 c. 400 d. 800

Description : A device is sending out data at the rate of 2000 bps. How long does it take to send a file of 1,00,000 characters ? a. 50 b. 200 c. 400 d. 800

Last Answer : c. 400

Which of the following is an advantage to using fiber optics data transmission? a. resistance to data theft b. fast data transmission rate c. low noise level d. all of above

Description : Which of the following is an advantage to using fiber optics data transmission? a. resistance to data theft b. fast data transmission rate c. low noise level d. all of above

Last Answer : fast data transmission rate

- MAC is to Ethernet what ________ is to Frame Relay. A. DLCI B. LCI C. PVC D. None of the above

Description : - MAC is to Ethernet what ________ is to Frame Relay. A. DLCI B. LCI C. PVC D. None of the above

Last Answer : DLCI

What type of network device allows youto share your connection to the Internet with other computers in your home? A) Ethernet card B) NIC C) Router D) Cat 5

Description : What type of network device allows youto share your connection to the Internet with other computers in your home? A) Ethernet card B) NIC C) Router D) Cat 5

Last Answer : Router

In the Ethernet frame, the_______field contains error detection information. A) CRC B) preamble C) address D) none of the above

Description : In the Ethernet frame, the_______field contains error detection information. A) CRC B) preamble C) address D) none of the above

Last Answer : CRC

In the Ethernet, the _______field is actually added at the physical layer and isnot (formally)part of the frame. A) CRC B) preamble C) address D) none of the above

Description : In the Ethernet, the _______field is actually added at the physical layer and isnot (formally)part of the frame. A) CRC B) preamble C) address D) none of the above

Last Answer : preamble

In Ethernet addressing, ifall the bits are 1s, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Description : In Ethernet addressing, ifall the bits are 1s, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : broadcast

In Ethernet addressing, if the least significant bit of the firstbyte is 1, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Description : In Ethernet addressing, if the least significant bit of the firstbyte is 1, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : multicast

In Ethernet addressing, if the least significant bit of the firstbyte is 0, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Description : In Ethernet addressing, if the least significant bit of the firstbyte is 0, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : unicast

Gigabit Ethernet access methods include _______ mode. A) half-duplex B) full-duplex C) both (a) and (b) D) neither (a) nor (b)

Description : Gigabit Ethernet access methods include _______ mode. A) half-duplex B) full-duplex C) both (a) and (b) D) neither (a) nor (b)

Last Answer : both (a) and (b)

Each station on an Ethernet network has a unique _______ address imprinted onits network interface card (NIC). A) 5-byte B) 32-bit C) 48-bit D) none of the above

Description : Each station on an Ethernet network has a unique _______ address imprinted onits network interface card (NIC). A) 5-byte B) 32-bit C) 48-bit D) none of the above

Last Answer : 48-b

______ is the most widelyused local area networkprotocol. A) Token Ring B) Token Bus C) Ethernet D) none of the above

Description : ______ is the most widelyused local area networkprotocol. A) Token Ring B) Token Bus C) Ethernet D) none of the above

Last Answer : Ethernet

If an Ethernet destination address is08:07:06:05:44:33, then this is a ______ address. A) unicast B) multicast C) broadcast D) any of theabove

Description : If an Ethernet destination address is08:07:06:05:44:33, then this is a ______ address. A) unicast B) multicast C) broadcast D) any of theabove

Last Answer : unicast

f an Ethernet destination address is07:01:02:03:04:05, then this is a ______ address. A) unicast B) multicast C) broadcast D) any of theabove

Description : f an Ethernet destination address is07:01:02:03:04:05, then this is a ______ address. A) unicast B) multicast C) broadcast D) any of theabove

Last Answer : multicast

. What is the hexadecimal equivalentof the Ethernet address 01011010 0001000101010101 00011000 10101010 00001111? A) 5A:88:AA:18:55:F0 B) 5A:81:BA:81:AA:0F C) 5A:18:5A:18:55:0F D) 5A:11:55:18:AA:0F

Description : . What is the hexadecimal equivalentof the Ethernet address 01011010 0001000101010101 00011000 10101010 00001111? A) 5A:88:AA:18:55:F0 B) 5A:81:BA:81:AA:0F C) 5A:18:5A:18:55:0F D) 5A:11:55:18:AA:0F

Last Answer : 5A:11:55:18:AA:0F

In astar-topology Ethernet LAN, _______ is just a point where the signals coming from different stations collide; it is thecollision point. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Description : In astar-topology Ethernet LAN, _______ is just a point where the signals coming from different stations collide; it is thecollision point. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Last Answer : A passivehub

An IGMP packet is carried in an __________ packet. A) UDP B) IP C) Ethernet frame D) noneof the above

Description : An IGMP packet is carried in an __________ packet. A) UDP B) IP C) Ethernet frame D) noneof the above

Last Answer : IP

The least significant 23 bits in a 48-bit Ethernet address identify a ________. A) multicast router B) host C) multicast group D) noneof the above

Description : The least significant 23 bits in a 48-bit Ethernet address identify a ________. A) multicast router B) host C) multicast group D) noneof the above

Last Answer : multicast group