To handleframesarrivingfrom other protocols, Frame Relay uses adevice calleda _________. A) VOFR B) FRAD C) MUX D) none of the above

To handleframesarrivingfrom other protocols, Frame Relay uses adevice calleda _________.
A)
VOFR
B)
FRAD
C)
MUX
D)
none of the above
by

1 Answer

Answer :

FRAD
by

Related questions

Frame Relay networks offer an optioncalled ______________that sends voice through the network. A) VOFR B) FRAD C) MUX D) none of the above

Description : Frame Relay networks offer an optioncalled ______________that sends voice through the network. A) VOFR B) FRAD C) MUX D) none of the above

Last Answer : VOFR

Which protocols adopted the standards of HDLC (High Level Link Control) protocol? a. X.25 protocol as LAPB (Link Access Procedure Balanced, V.42 protocol as LAPM (Link Access Procedure for Modems) b. Frame Relay protocol as LAPF (Link Access Procedure for Frame Relay) c. ISDN (Integrated Services Digital Network) protocol as LAPD (Link Access Procedure on D channel) d. All the above

Description : Which protocols adopted the standards of HDLC (High Level Link Control) protocol? a. X.25 protocol as LAPB (Link Access Procedure Balanced, V.42 protocol as LAPM (Link Access Procedure for ... Services Digital Network) protocol as LAPD (Link Access Procedure on D channel) d. All the above

Last Answer : d. All the above

Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control)c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Description : Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control) c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Last Answer : d. All the above

Both Go-Back-N and Selective-Repeat Protocols use a_________. A) sliding frame B) sliding windowC)sliding packetD)none of the above

Description : Both Go-Back-N and Selective-Repeat Protocols use a_________. A) sliding frame B) sliding window C) sliding packet D) none of the above

Last Answer : sliding window

Which of the following technique isused for encapsulation? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets. B. a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame. C. One of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Description : Which of the following technique isused for encapsulation? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets. B. a technique used by protocols in which a lower level ... network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Last Answer : a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame

Which of the following technique isused for fragment? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets B. a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame C. one of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Description : Which of the following technique isused for fragment? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets B. a technique used by protocols in which a lower level protocol ... network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Last Answer : one of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size

- MAC is to Ethernet what ________ is to Frame Relay. A. DLCI B. LCI C. PVC D. None of the above

Description : - MAC is to Ethernet what ________ is to Frame Relay. A. DLCI B. LCI C. PVC D. None of the above

Last Answer : DLCI

______ eliminates the varying delay times associated withdifferent-size packets. A) X.25 B) Frame Relay C) ATM D) all of theabove

Description : ______ eliminates the varying delay times associated withdifferent-size packets. A) X.25 B) Frame Relay C) ATM D) all of theabove

Last Answer : ATM

______ is the cell relay protocol designed by the corresponding Forum and adopted by the ITU-T. A) X.25 B) Frame Relay C) ATM D) none of the above

Description : ______ is the cell relay protocol designed by the corresponding Forum and adopted by the ITU-T. A) X.25 B) Frame Relay C) ATM D) none of the above

Last Answer : ATM

In Frame Relay, the EA field defines thenumber of bytes; it is _____ in the last byte of the address. A) 0 B) 1 C) 2 D) 3

Description : In Frame Relay, the EA field defines thenumber of bytes; it is _____ in the last byte of the address. A) 0 B) 1 C) 2 D) 3

Last Answer : 1

In Frame Relay, an address can be________ bytes. A) only 2 B) 2 to 3 C) 2 to 4 D) none of the above

Description : In Frame Relay, an address can be________ bytes. A) only 2 B) 2 to 3 C) 2 to 4 D) none of the above

Last Answer : 2 to 4

Frame Relay has_______. A) only the physical layer B) only thedata link C) the physical and data link layers D) the physical, data link, andnetwork layers

Description : Frame Relay has_______. A) only the physical layer B) only thedata link C) the physical and data link layers D) the physical, data link, andnetwork layers

Last Answer : the physical and data link layers

In Frame Relay, when. ______ is selected, it requires establishing andterminatingphases A) a PVC B) an SVC C) either (a) or (b) D) neither (a) nor (b)

Description : In Frame Relay, when. ______ is selected, it requires establishing andterminatingphases A) a PVC B) an SVC C) either (a) or (b) D) neither (a) nor (b)

Last Answer : an SVC

In Frame Relay, when a _____ is selected, the correspondingtable entry is recorded for all switches by the administrator A) PVC B) SVC C) either (a) or (b) D) neither (a) nor (b)

Description : In Frame Relay, when a _____ is selected, the correspondingtable entry is recorded for all switches by the administrator A) PVC B) SVC C) either (a) or (b) D) neither (a) nor (b)

Last Answer : PVC

VCIs in Frame Relay arecalled ______. A) PVC B) SVC C) DLCIs D) none of the above

Description : VCIs in Frame Relay arecalled ______. A) PVC B) SVC C) DLCIs D) none of the above

Last Answer : DLCIs

Frame Relay provides ________. A) PVCs B) SVCs C) either (a) or (b) D) neither (a) nor (b)

Description : Frame Relay provides ________. A) PVCs B) SVCs C) either (a) or (b) D) neither (a) nor (b)

Last Answer : Frame Relay

________ is a virtual-circuit wide-area network that was designed in response to demands fora new type of WAN in thelate1980s and early 1990s. A) X.25 B) Frame Relay C) ATM D) none of the above

Description : ________ is a virtual-circuit wide-area network that was designed in response to demands fora new type of WAN in thelate1980s and early 1990s. A) X.25 B) Frame Relay C) ATM D) none of the above

Last Answer : Frame Relay

In IPv6,a _______address is usedif aLAN uses the Internet protocols but isnot connected tothe Internet for security reasons. A) link local B) site local C) mapped D) none of the above

Description : In IPv6,a _______address is usedif aLAN uses the Internet protocols but isnot connected tothe Internet for security reasons. A) link local B) site local C) mapped D) none of the above

Last Answer : link local

The arranging of data in a logical sequence is calleda. Sortingb. Classifyingc. Reproducingd. Summarizing

Description : The arranging of data in a logical sequence is called a. Sorting b. Classifying c. Reproducing d. Summarizing

Last Answer : Sorting

The carrier that handles inter-LATA services is calleda(n) _______. A) POP B) IXC C) LEC D) none of the above

Description : The carrier that handles inter-LATA services is calleda(n) _______. A) POP B) IXC C) LEC D) none of the above

Last Answer : IXC

Thecarrier that handles intra-LATA services is calleda(n) _____ . A) POP B) IXCC)LECD)none of the above

Description : Thecarrier that handles intra-LATA services is calleda(n) _____ . A) POP B) IXC C) LEC D) none of the above

Last Answer : LEC

Sending afile from your personal computer's primary memory or disk to another computer is calledA.uploadingB.downloadingC.logging onD.hang onE.None of the above

Description : Sending afile from your personal computer's primary memory or disk to another computer is called A. uploading B. downloading C. logging on D. hang on E. None of the above

Last Answer : uploading

Inthe _________ method, a special packet called a ______ circulates through the ring. A) reservation: control frame B) polling: poll request C) token passing: token D) none of the above

Description : Inthe _________ method, a special packet called a ______ circulates through the ring. A) reservation: control frame B) polling: poll request C) token passing: token D) none of the above

Last Answer : token passing: token

Inthe _________ method, after the station finds the lineidle, it sends its frame immediately. If the line isnot idle, it continuously senses theline until it finds it idle. A) nonpersistent B) 1-persistent C) p-persistent D) none of the above

Description : Inthe _________ method, after the station finds the lineidle, it sends its frame immediately. If the line isnot idle, it continuously senses theline until it finds it idle. A) nonpersistent B) 1-persistent C) p-persistent D) none of the above

Last Answer : 1-persistent

A _________ network is across between a circuit-switchednetworkand a datagram network. It has some characteristics ofboth. A) virtual-circuit B) packet-switched C) frame-switched D) none of the above

Description : A _________ network is across between a circuit-switchednetworkand a datagram network. It has some characteristics ofboth. A) virtual-circuit B) packet-switched C) frame-switched D) none of the above

Last Answer : virtual-circui

In _________, resources areallocatedon demand. A) datagram switching B) circuit switching C) frame switching D) none of the above

Description : In _________, resources areallocatedon demand. A) datagram switching B) circuit switching C) frame switching D) none of the above

Last Answer : datagram switching

In _________, thereis no resource allocation for a packet. A) datagram switching B) circuit switching C) frame switching D) none of the above

Description : In _________, thereis no resource allocation for a packet. A) datagram switching B) circuit switching C) frame switching D) none of the above

Last Answer : datagram switching

In IPv6, options are inserted between the _________ and the ___________ data A. base header; extension header B. base header; upper-layer data C. base header; frame header D. none of the above

Description : In IPv6, options are inserted between the _________ and the ___________ data A. base header; extension header B. base header; upper-layer data C. base header; frame header D. none of the above

Last Answer : B. base header; upper-layer data

A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of an acknowledgement is 100 bytes and the transmission rate at the receiver is 8 Kbps. The one-way propagation delay is 100 milliseconds. Assuming no frame is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Last Answer : a. 2500

The standard suit of protocols used by the Internet, Intranets, extranets and some other networks. A) TCP/IP B) Protocol C) Open system D) Internet work processor

Description : The standard suit of protocols used by the Internet, Intranets, extranets and some other networks. A) TCP/IP B) Protocol C) Open system D) Internet work processor

Last Answer : A) TCP/IP

Which of the following is NOT true about User Datagram Protocol in transport layer?a. Works well in unidirectional communication, suitable for broadcast information. b. It does three way handshake before sending datagrams c. It provides datagrams, suitable for modeling other protocols such as in IP tunneling or Remote Procedure Call and the Network File System d. The lack of retransmission delays makes it suitable for real-time applications

Description : Which of the following is NOT true about User Datagram Protocol in transport layer? a. Works well in unidirectional communication, suitable for broadcast information. b. It does three way ... File System d. The lack of retransmission delays makes it suitable for real-time applications

Last Answer : b. It does three way handshake before sending datagrams

State weather the following statement is true or false for Internetwork layer. 1).Other internetwork-layer protocols are IP, ICMP, IGMP, ARP, and RARP. 2). Internet Protocol (IP) is the least important protocol in this layer 3). The internetwork layer, also called the internet layer or the network layer, provides the “virtual network” A. 1. True, 2. true, 3. true B. 1. true, 2. false, 3.true C. 1. false, 2. false, 3. false D. 1. true, 2. true, 3. false

Description : State weather the following statement is true or false for Internetwork layer. 1).Other internetwork-layer protocols are IP, ICMP, IGMP, ARP, and RARP. 2). Internet Protocol (IP) is the least important protocol in this layer ... 3.true C. 1. false, 2. false, 3. false D. 1. true, 2. true, 3. false

Last Answer : B. 1. true, 2. false, 3.true

The schematic diagram shown in the illustration uses symbol 'A' to represent a/an _________. EL-0011 A. non-renewable fuse link B. circuit breaker coil C. overload relay coil D. thermal overload heater

Description : The schematic diagram shown in the illustration uses symbol 'A' to represent a/an _________. EL-0011 A. non-renewable fuse link B. circuit breaker coil C. overload relay coil D. thermal overload heater

Last Answer : Answer: D

The IEEE 802.11g, uses _________. A) FHSS B) DSSS C) OFDM D) either (a)or (b)

Description : The IEEE 802.11g, uses _________. A) FHSS B) DSSS C) OFDM D) either (a)or (b)

Last Answer : OFDM

The IEEE 802.11b, uses _________. A) FHSS B) DSSS C) OFDM D) either (a)or (b)

Description : The IEEE 802.11b, uses _________. A) FHSS B) DSSS C) OFDM D) either (a)or (b)

Last Answer : DSSS

The IEEE 802.11a, uses _________. A) FHSS B) DSSS C) OFDM D) either (a)or (b)

Description : The IEEE 802.11a, uses _________. A) FHSS B) DSSS C) OFDM D) either (a)or (b)

Last Answer : OFDM

The original IEEE 802.11,uses _________. A) FHSS B) DSSS C) OFDM D) either (a)or (b)

Description : The original IEEE 802.11,uses _________. A) FHSS B) DSSS C) OFDM D) either (a)or (b)

Last Answer : either (a)or (b)

_________ uses four twisted pairs. A) 1000Base-SX B) 1000Base-LX C) 1000Base-T D) none of the above

Description : _________ uses four twisted pairs. A) 1000Base-SX B) 1000Base-LX C) 1000Base-T D) none of the above

Last Answer : 1000Base-T

_________ uses thin coaxial cable. A) 10Base5 B) 10Base2 C) 10Base-T D) 10Base-F

Description : _________ uses thin coaxial cable. A) 10Base5 B) 10Base2 C) 10Base-T D) 10Base-F

Last Answer : 10Base2

The _________ routing uses the Dijkstra algorithm to build aroutingtable. A) distancevector B) link state C) path vector D) none of the above

Description : The _________ routing uses the Dijkstra algorithm to build aroutingtable. A) distancevector B) link state C) path vector D) none of the above

Last Answer : link state

The purpose of the _______is to provide flow and error control for the upper-layer protocols that actually demand theseservices A) MAC B) LLC C) LLU D) none of the above

Description : The purpose of the _______is to provide flow and error control for the upper-layer protocols that actually demand theseservices A) MAC B) LLC C) LLU D) none of the above

Last Answer : LLC

Which of the following layer protocols are responsible for user and theapplicationprogrammesupport such aspasswords, resource sharing, file transfer and network management? A. Layer 7 protocols B. Layer 6 protocols C. Layer 5 protocols D. Layer 4 protocols E. None of the above

Description : Which of the following layer protocols are responsible for user and theapplicationprogrammesupport such aspasswords, resource sharing, file transfer and network management? A. Layer 7 protocols B. Layer 6 protocols C. Layer 5 protocols D. Layer 4 protocols E. None of the above

Last Answer : Layer 7 protocols

What device separates asingle network into two segmentsbut lets the twosegments appear as one tohigher protocols? A. Switch B. Bridge C. Gateway D. Router

Description : What device separates asingle network into two segmentsbut lets the twosegments appear as one tohigher protocols? A. Switch B. Bridge C. Gateway D. Router

Last Answer : Bridge

Which of the following is used for modulation and demodulation? A. modem B. protocols C. gatewayD.multiplexerE.None of the above

Description : Which of the following is used for modulation and demodulation? A. modem B. protocols C. gateway D. multiplexer E. None of the above

Last Answer : modem

Which of the following of the TCP/IP protocols is the used for transferring files from one machine to another? A) FTP B) C) SNMP C) SMTP D) D) Rpe

Description : Which of the following of the TCP/IP protocols is the used for transferring files from one machine to another? A) FTP B) C) SNMP C) SMTP D) D) Rpe

Last Answer : A) FTP

Which of the transport layer protocols is connectionless? A) UDP B) TCP C) FTP D) Nvt

Description : Which of the transport layer protocols is connectionless? A) UDP B) TCP C) FTP D) Nvt

Last Answer : A) UDP

Which of the following TCP/IP protocols is used for transferring files form one machine to another. A) FTP B) SNMP C) SMTP D) RPC

Description : Which of the following TCP/IP protocols is used for transferring files form one machine to another. A) FTP B) SNMP C) SMTP D) RPC

Last Answer : A) FTP

Which of the following protocols is an application layer protocol that establishes, manages and terminates multimedia sessions ? a. Session Maintenance Protocol b. Real - time Streaming Protocol c. Real - time Transport Control Protocol d. Session Initiation Protocol

Description : Which of the following protocols is an application layer protocol that establishes, manages and terminates multimedia sessions ? a. Session Maintenance Protocol b. Real - time Streaming Protocol c. Real - time Transport Control Protocol d. Session Initiation Protocol

Last Answer : d. Session Initiation Protocol

Which of the following protocols is used by email server to maintain a central repository that can be accessed from any machine ? a. POP3 b. IMAP c. SMTP d. DMSP

Description : Which of the following protocols is used by email server to maintain a central repository that can be accessed from any machine ? a. POP3 b. IMAP c. SMTP d. DMSP

Last Answer : b. IMAP

Which of the following is/are example(s) of stateful application layer protocols? (i) HTTP (ii) FTP (iii) TCP (iv) POP3 a. (i) and (ii) only b. (ii) and (iii) only c. (ii) and (iv) only d. (iv) only

Description : Which of the following is/are example(s) of stateful application layer protocols? (i) HTTP (ii) FTP (iii) TCP (iv) POP3 a. (i) and (ii) only b. (ii) and (iii) only c. (ii) and (iv) only d. (iv) only

Last Answer : c. (ii) and (iv) only