Description : In Frame Relay, the EA field defines thenumber of bytes; it is _____ in the last byte of the address. A) 0 B) 1 C) 2 D) 3
Last Answer : 1
Description : Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control) c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above
Last Answer : d. All the above
Description : The maximum frame length for 10-Mbps Ethernet is ________ bytes. A) 1518 B) 1500 C) 1200 D) none of the abov
Last Answer : 1518
Description : In SONET, for each frame, the bytes are transmitted __________. A) from left to the right, top to bottom B) from right to theleft, bottom to top C) from left to the right, bottom to top D) from right to the left, top to bottom
Last Answer : from left to the right, bottom to top
Description : The minimum frame size required for a CSMA/CD based computer network running at 1 Gbps on a 200m cable with a link speed of 2 × 108m/s is a. 125 bytes b. 250 bytes c. 500 bytes d. None of these
Last Answer : b. 250 bytes
Description : How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes
Last Answer : b. 12,000 bytes
Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500
Last Answer : a. 2500
Description : Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000
Last Answer : d. 20000
Description : Header of a frame generally contains a. synchronization bytes b. addresses c. frame identifier d. all of the mentioned
Last Answer : d. all of the mentioned
Description : Header of a Layer two frame usually contain ______________ A. synchronization bytes B. addresses C. frame identifier D. all of the mentioned
Last Answer : D. all of the mentioned
Description : Frame Relay has_______. A) only the physical layer B) only thedata link C) the physical and data link layers D) the physical, data link, andnetwork layers
Last Answer : the physical and data link layers
Description : - MAC is to Ethernet what ________ is to Frame Relay. A. DLCI B. LCI C. PVC D. None of the above
Last Answer : DLCI
Description : ______ eliminates the varying delay times associated withdifferent-size packets. A) X.25 B) Frame Relay C) ATM D) all of theabove
Last Answer : ATM
Description : ______ is the cell relay protocol designed by the corresponding Forum and adopted by the ITU-T. A) X.25 B) Frame Relay C) ATM D) none of the above
Description : Frame Relay networks offer an optioncalled ______________that sends voice through the network. A) VOFR B) FRAD C) MUX D) none of the above
Last Answer : VOFR
Description : To handleframesarrivingfrom other protocols, Frame Relay uses adevice calleda _________. A) VOFR B) FRAD C) MUX D) none of the above
Last Answer : FRAD
Description : In Frame Relay, when. ______ is selected, it requires establishing andterminatingphases A) a PVC B) an SVC C) either (a) or (b) D) neither (a) nor (b)
Last Answer : an SVC
Description : In Frame Relay, when a _____ is selected, the correspondingtable entry is recorded for all switches by the administrator A) PVC B) SVC C) either (a) or (b) D) neither (a) nor (b)
Last Answer : PVC
Description : VCIs in Frame Relay arecalled ______. A) PVC B) SVC C) DLCIs D) none of the above
Last Answer : DLCIs
Description : Frame Relay provides ________. A) PVCs B) SVCs C) either (a) or (b) D) neither (a) nor (b)
Last Answer : Frame Relay
Description : ________ is a virtual-circuit wide-area network that was designed in response to demands fora new type of WAN in thelate1980s and early 1990s. A) X.25 B) Frame Relay C) ATM D) none of the above
Description : Which protocols adopted the standards of HDLC (High Level Link Control) protocol? a. X.25 protocol as LAPB (Link Access Procedure Balanced, V.42 protocol as LAPM (Link Access Procedure for ... Services Digital Network) protocol as LAPD (Link Access Procedure on D channel) d. All the above
Description : To guarantee correction ofup to 5 errors in all cases, the minimum Hamming distance in a block code must be________. A) 5 B) 6 C) 11 D) none of the above
Last Answer : 11
Description : In IEEE 802.11, when a frame isgoingfrom one AP to another AP in a wireless distribution system, the address flag is_____ A) 00 B) 01 C) 10 D) 11
Description : In IEEE 802.11, when a frame is coming from an AP and going to astation, the address flag is _______. A) 00 B) 01 C) 10 D) 11
Last Answer : 01
Description : In IEEE 802.11, when a frame isgoingfrom one station in a BSS toanother without passing through thedistribution system, the address flag is _____ A) 00 B) 01 C) 10 D) 11
Last Answer : 00
Description : In the Ethernet frame, the_______field contains error detection information. A) CRC B) preamble C) address D) none of the above
Last Answer : CRC
Description : In the Ethernet, the _______field is actually added at the physical layer and isnot (formally)part of the frame. A) CRC B) preamble C) address D) none of the above
Last Answer : preamble
Description : The term gigabyte refers to a. 1024 bytes b. 1024 kilobytes c. 1024 megabytes d. 1024 gigabyte
Last Answer : 1024 megabytes
Description : Which of the following is true? a. Fields are composed of bytes b. Records are composed of fields c. Fields are composed of characters d. All of above
Last Answer : All of above
Description : Which statement is valid? a. 1KB = 1024 bytes b. 1 MB=2048 bytes c. 1 MB = 1000 kilobytes d. 1 KB = 1000 bytes
Last Answer : 1KB = 1024 bytes
Description : Inasynchronous transmission, the gap time between bytes is _______. A) fixed B) variable C) afunctionof the data rate D) zero
Last Answer : variable
Description : The IPv4header size _______. A) is 20 to 60 bytes long B) is 20 bytes long C) is 60 bytes long D) noneof the above
Last Answer : is 20 to 60 bytes long
Description : The IPv4header size _______. A) is 20 to 60 bytes long B) is always 20bytes long C) is always 60bytes long D) depends on the MTU
Description : In IPv4, if the fragment offset hasa value of 100, it means that _______. A) thedatagram has notbeen fragmented B) thedatagram is 100 bytes in size C) thefirst byte of the datagram is byte100 D) the first byteof the datagram is byte800
Last Answer : the first byteof the datagram is byte800
Description : In IPv4, what is the value of the total length field in bytes if the header is 28 bytes and the data field is 400bytes? A) 428 B) 407 C) 107 D) 427
Last Answer : 428
Description : In IPv4 header, an HLEN value of decimal 10 means_______. A) there are 10bytes ofoptions B) there are 40bytes ofoptions C) there are 10bytes inthe header D) thereare 40 bytes in the header
Last Answer : thereare 40 bytes in the header
Description : What is the commonly used unit for measuring the speed of data transmission? A) Bytes per second B) Baud C) Bits per second D) Both B and C
Last Answer : B) Baud
Description : Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is __________. a. 400 bps b. 800 bps c. 1600 bps d. 3200 bps
Last Answer : d. 3200 bps
Description : An ACK number of 1000 in TCP always means that a. 999 bytes have been successfully received b. 1000 bytes have been successfully received c. 1001 bytes have been successfully received d. None of the above
Last Answer : d. None of the above
Description : What is the maximum size of data that the application layer can pass on to the TCP layer below? a. Any size b. 216 bytes - size of TCP header c. 216 bytes d. 1500
Last Answer : a. Any size
Description : In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the ... 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689
Last Answer : c. Last fragment, 2400 and 2759
Description : An IP datagram of size 1000 bytes arrives at a router. The router has to forward this packet on a link whose MTU (maximum transmission unit) is 100 bytes. Assume that the size of the IP header is 20 bytes ... the IP datagram will be divided into for transmission is : a. 10 b. 50 c. 12 d. 13
Last Answer : d. 13
Description : The network layer is concerned with __________ of data. a. bits b. frames c. packets d. bytes
Last Answer : c. packets
Description : A UDP datagram of _____ bytes is acceptable to all implementations A. 516 B. 1024 C. 256 D. 512
Last Answer : A. 516
Description : The IPv4 header size _______ A. is 20 to 60 bytes long B. is always 20 bytes long C. is always 60 bytes long D. depends on the MTU
Last Answer : A. is 20 to 60 bytes long
Description : In IPv4 header, an HLEN value of decimal 10 means _______ A. there are 10 bytes of options B. there are 40 bytes of options C. there are 10 bytes in the header D. there are 40 bytes in the header
Last Answer : D. there are 40 bytes in the header
Description : The network layer encapsulates the data into _______of data. A. bits B. frames C. packets D. bytes
Last Answer : C. packets