Find the time constant in a series R-L circuit when the resistance is 4 ohm and the inductance is 2 H. a) 0.25 b) 0.2 c) 2 d) 0.5

Find the time constant in a series R-L circuit when the resistance is 4 ohm and the
inductance is 2 H.
a) 0.25
b) 0.2
c) 2
d) 0.5
by

1 Answer

Answer :

d) 0.5
by

Related questions

If resistance is 20 Q. and inductance is 27 in a R-L series circuit, then time constant of this circuit will be?

Description : If resistance is 20 Q. and inductance is 27 in a R-L series circuit, then time constant of this circuit will be?

Last Answer : 0.1s

Find the dissipation factor when series resistance is 5 ohm and capacitive resistance is 10 unit. a) 2 b) 0.5 c) 1 d) 0

Description : Find the dissipation factor when series resistance is 5 ohm and capacitive resistance is 10 unit. a) 2 b) 0.5 c) 1 d) 0

Last Answer : b) 0.5

Find the time constant for a R-C circuit for resistance R = 24 kohm and C = 16 microfarad. a) 1.5 millisecond b) 0.6 nanosecond c) 384 millisecond d) 384 microsecond

Description : Find the time constant for a R-C circuit for resistance R = 24 kohm and C = 16 microfarad. a) 1.5 millisecond b) 0.6 nanosecond c) 384 millisecond d) 384 microsecond

Last Answer : c) 384 millisecond

The inductance of a coaxial cable with inner radius a and outer radius b, from a distance d, is given by a) L = μd ln(b/a)/2π b) L = 2π μd ln(b/a) c) L = πd/ln(b/a) d) L = 0

Description : The inductance of a coaxial cable with inner radius a and outer radius b, from a distance d, is given by a) L = μd ln(b/a)/2π b) L = 2π μd ln(b/a) c) L = πd/ln(b/a) d) L = 0

Last Answer : a) L = μd ln(b/a)/2π

The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected toa conducting rod PQ of length l=wm which can slide on a perfectly condu

Description : The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected toa conducting rod PQ of length l=wm which can slide on a perfectly condu

Last Answer : The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected toa conducting rod PQ of length l= ... (inN-m) at t=(0.3In 2) second.

The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected to a conducting rod PQ of length l=wm which can slide on a perfectly cond

Description : The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected to a conducting rod PQ of length l=wm which can slide on a perfectly cond

Last Answer : The circuit shows a resistance, `R=0.01Omega` and inductance L=3mH connected to a conducting rod PQ of length ... (inN-m) at t=(0.3In 2) second.

The expression for the inductance in terms of turns, flux and current is given by a) L = N dφ/di b) L = -N dφ/di c) L = Niφ d) L = Nφ/i

Description : The expression for the inductance in terms of turns, flux and current is given by a) L = N dφ/di b) L = -N dφ/di c) L = Niφ d) L = Nφ/i

Last Answer : a) L = N dφ/di

Find the time constant of a capacitor with capacitance of 2 microfarad having an internal resistance of 4 megaohm. a) 2 b) 0.5 c) 8 d) 0.25

Description : Find the time constant of a capacitor with capacitance of 2 microfarad having an internal resistance of 4 megaohm. a) 2 b) 0.5 c) 8 d) 0.25

Last Answer : c) 8

The minimum impedance of a 75 ohm transmission line with a SWR of 2.5 is a) 100 b) 50 c) 25 d) 30

Description : The minimum impedance of a 75 ohm transmission line with a SWR of 2.5 is a) 100 b) 50 c) 25 d) 30

Last Answer : d) 30

The equivalent inductance of two coils with series opposing flux having inductances 7H and 2H with a mutual inductance of 1H. a) 10 b) 7 c) 11 d) 13

Description : The equivalent inductance of two coils with series opposing flux having inductances 7H and 2H with a mutual inductance of 1H. a) 10 b) 7 c) 11 d) 13

Last Answer : b) 7

The equivalent inductances of two coils 2H and 5H in series aiding flux with mutual inductance of 3H is a) 10 b) 30 c) 1 d) 13

Description : The equivalent inductances of two coils 2H and 5H in series aiding flux with mutual inductance of 3H is a) 10 b) 30 c) 1 d) 13

Last Answer : d) 13

Which type of flux will increase the inductance? a) Series aiding b) Series opposing c) Shunt aiding d) Shunt opposing

Description : Which type of flux will increase the inductance? a) Series aiding b) Series opposing c) Shunt aiding d) Shunt opposing

Last Answer : a) Series aiding

The formula for computing impedance in a series circuit containing resistance, capacitance, and inductance is _____________. [ NOTE: the symbol * stands for 'multiplied by' ] A. Z = RT + XL + XC B. Z = R + XL - XC C. Z * Z = R * R + (XL - XC) * (XL - XC) D. Z = R * R + (XL * XC) - (XL * XC)

Description : The formula for computing impedance in a series circuit containing resistance, capacitance, and inductance is _____________. [ NOTE: the symbol * stands for 'multiplied by' ] A. Z = RT + XL + XC B. Z = R + XL - XC C. Z * Z = R * R + (XL - XC) * (XL - XC) D. Z = R * R + (XL * XC) - (XL * XC)

Last Answer : Answer: C

The effective skin resistance of a material with conductivity 120 and skin depth of 2μm is a) 4.16 kilo ohm b) 4.16 mega ohm c) 41.6 kilo ohm d) 41.6 mega ohm

Description : The effective skin resistance of a material with conductivity 120 and skin depth of 2μm is a) 4.16 kilo ohm b) 4.16 mega ohm c) 41.6 kilo ohm d) 41.6 mega ohm

Last Answer : a) 4.16 kilo ohm

Find the current in a conductor with resistance 2 ohm, electric field 2 units and distance 100cm. a) 1A b) 10mA c) 10A d) 100mA

Description : Find the current in a conductor with resistance 2 ohm, electric field 2 units and distance 100cm. a) 1A b) 10mA c) 10A d) 100mA

Last Answer : a) 1A

The resistivity of a material with resistance 200 ohm, length 10m and area twice that of the length is a) 200 b) 300 c) 400 d) 500

Description : The resistivity of a material with resistance 200 ohm, length 10m and area twice that of the length is a) 200 b) 300 c) 400 d) 500

Last Answer : c) 400

The resistance in a magnetic material is called as a) Capacitance b) Inductance c) Reluctance d) Magnetic resistance

Description : The resistance in a magnetic material is called as a) Capacitance b) Inductance c) Reluctance d) Magnetic resistance

Last Answer : c) Reluctance

The magnetostatics highly relies on which property? a) Resistance b) Capacitance c) Inductance d) Moment

Description : The magnetostatics highly relies on which property? a) Resistance b) Capacitance c) Inductance d) Moment

Last Answer : c) Inductance

An a.c series circuit has resistance of 10ohm, inductance of 0.1H and capacitance of 10µf, voltage applied to circuit is 200V. find (i) Resonant frequency (ii) Current at resonance (iii) Power at resonance

Description : An a.c series circuit has resistance of 10ohm, inductance of 0.1H and capacitance of 10µf, voltage applied to circuit is 200V. find (i) Resonant frequency (ii) Current at resonance (iii) Power at resonance 

Last Answer : Solution: For RLC series circuit

A series RLC circuit has a resistance of 50 , inductance of 0.4H and a...

Description : A series RLC circuit has a resistance of 50 , inductance of 0.4H and a capacitor of 10µF. The circuit is connected across a 100V supply. The resonance frequency and the current through the resistance are 

Last Answer : A series RLC circuit has a resistance of 50 , inductance of 0.4H and a capacitor of 10µF. The circuit is connected across a 100V supply. The resonance frequency and the current through the resistance are 500 rad/s and 2A.

Find the standing wave ratio, when a load impedance of 250 ohm is connected to a 75 ohm line. a) 0.3 b) 75 c) 250 d) 3.33

Description : Find the standing wave ratio, when a load impedance of 250 ohm is connected to a 75 ohm line. a) 0.3 b) 75 c) 250 d) 3.33

Last Answer : d) 3.33

A coil of inductance 240 mH and resistance 75 Ohm is connected in parallel with a capacitor across a 30 V,

Description : A coil of inductance 240 mH and resistance 75 Ohm is connected in parallel with a capacitor across a 30 V, variable frequency supply. The current drawn by the circuit is found to be minimum when the supply frequency is 1 kHz. The ... (A) 40, 400 Hz (B) 10, 100 Hz (C) 20, 50 Hz (D) 50, 20 Hz

Last Answer : A coil of inductance 240 mH and resistance 75 Ohm is connected in parallel with a capacitor across a 30 V, variable frequency supply. The current drawn by the circuit is found to be minimum ... supply frequency is 1 kHz. The approximate values of Q-factor and bandwidth are, respectively 20, 50 Hz

In an L-C -R series circuit connected to an AC source `V=V_(0)sin(100pi(t)+(pi)/(6))``V_(R)=40V, V_(L)=40 and V_(C )=10V`, resistance `R=4Omega` Choos

Description : In an L-C -R series circuit connected to an AC source `V=V_(0)sin(100pi(t)+(pi)/(6))``V_(R)=40V, V_(L)=40 and V_(C )=10V`, resistance `R=4Omega` Choos

Last Answer : In an L-C -R series circuit connected to an AC source `V=V_(0)sin(100pi(t)+(pi)/(6))``V_(R)=40V, V_(L) ... (2) A` C. `20sqrt(2) A` D. `25sqrt(2) A`

V=100Sin (1000t+46 deg), I=2Sin (1000t+80 deg) what are the elements in the circuit a) R=30 ohm, L=30 mH b) R=30 ohm, C=33.3 micro farads c) R=40 ohm, L=30 mH d) R=40 ohm, L=33.3 micro farads

Description : V=100Sin (1000t+46 deg), I=2Sin (1000t+80 deg) what are the elements in the circuit a) R=30 ohm, L=30 mH b) R=30 ohm, C=33.3 micro farads c) R=40 ohm, L=30 mH d) R=40 ohm, L=33.3 micro farads

Last Answer : Ans: R=40 ohm, L=33.3 micro farads

Find the inductance of a material with 100 turns, area 12 units and current of 2A in air. a) 0.75mH b) 7.5mH c) 75mH d) 753mH

Description : Find the inductance of a material with 100 turns, area 12 units and current of 2A in air. a) 0.75mH b) 7.5mH c) 75mH d) 753mH

Last Answer : a) 0.75mH

Two batteries A and B each of e.m.f. 2 V are connected in series to an external resistance R = 1 ohm . If the internal resistance of battery A is 1.9

Description : Two batteries A and B each of e.m.f. 2 V are connected in series to an external resistance R = 1 ohm . If the internal resistance of battery A is 1.9

Last Answer : Two batteries A and B each of e.m.f. 2 V are connected in series to an external resistance R = 1 ohm . If the ... V B. `3.8` V C. zero D. `4.8` V

N resistors of each of resistance R when connected in series offer an equivalent resistance of 50 ohm and when reconnected in parallel the effective resistance is 2 ohm the value of R is

Description : N resistors of each of resistance R when connected in series offer an equivalent resistance of 50 ohm and when reconnected in parallel the effective resistance is 2 ohm the value of R is

Last Answer : 25 ohms

A 35 V dc supply is connected across a resistance of 600 ohm in series with an unknown resistance R. A

Description : A 35 V dc supply is connected across a resistance of 600 ohm in series with an unknown resistance R. A voltmeter having a resistance of 1.2 kOhm is connected across 600 ohm resistances and reads 5 V. The value of resistance R shall be:

Last Answer : A 35 V dc supply is connected across a resistance of 600 ohm in series with an unknown resistance R. A voltmeter having a resistance of 1.2 kOhm is connected across 600 ohm resistances and reads 5 V. The value of resistance R shall be: 2.4 kOhm

A circuit has a resistance of 200 ohms. The resistance of the circuit can be reduced to 120 ohms by adding which of the following to the circuit. w) 80 ohm resistor in series x) 150 ohm resistor in parallel y) 240 ohm resistor in series z) 300 ohm resistor in parallel

Description : A circuit has a resistance of 200 ohms. The resistance of the circuit can be reduced to 120 ohms by adding which of the following to the circuit. w) 80 ohm resistor in series x) 150 ohm resistor in parallel y) 240 ohm resistor in series z) 300 ohm resistor in parallel

Last Answer : ANSWER: Z -- 300 OHM RESISTOR IN PARALLEL

The attenuation constant is 0.5 units. The skin depth will be a) 0.5 b) 0.25 c) 2 d) 4

Description : The attenuation constant is 0.5 units. The skin depth will be a) 0.5 b) 0.25 c) 2 d) 4

Last Answer : c) 2

Find the inductance of a coil with permeability 3.5, turns 100 and length 2m. Assume the area to be thrice the length. a) 131.94mH b) 94.131mH c) 131.94H d) 94.131H

Description : Find the inductance of a coil with permeability 3.5, turns 100 and length 2m. Assume the area to be thrice the length. a) 131.94mH b) 94.131mH c) 131.94H d) 94.131H

Last Answer : a) 131.94mH

In a series circuit, which value will remain unchanged at all places in the circuit? A. Voltage B. Current C. Resistance D. Inductance

Description : In a series circuit, which value will remain unchanged at all places in the circuit? A. Voltage B. Current C. Resistance D. Inductance

Last Answer : Answer: B

The maximum impedance of a 50 ohm transmission line with SWR of 3 is a) 50/3 b) 3/50 c) 150 d) 450

Description : The maximum impedance of a 50 ohm transmission line with SWR of 3 is a) 50/3 b) 3/50 c) 150 d) 450

Last Answer : c) 150

The intrinsic impedance of free space is given by a) 272 ohm b) 412 ohm c) 740 ohm d) 377 ohm

Description : The intrinsic impedance of free space is given by a) 272 ohm b) 412 ohm c) 740 ohm d) 377 ohm

Last Answer : d) 377 ohm

An `L-C-R` series circuit with `100Omega` resistance is connected to an `AC` source of `200V` and angular frequency `300rad//s`. When only the capacit

Description : An `L-C-R` series circuit with `100Omega` resistance is connected to an `AC` source of `200V` and angular frequency `300rad//s`. When only the capacit

Last Answer : An `L-C-R` series circuit with `100Omega` resistance is connected to an `AC` source of `200V` and ... and the power dissipated in the `L-C-R` circuit

If the potential is given by, V = 10sin θ cosφ/r, find the density at the point P(2, π/2, 0) (in 10 -12 units) a) 13.25 b) 22.13 c) 26.31 d) 31.52

Description : If the potential is given by, V = 10sin θ cosφ/r, find the density at the point P(2, π/2, 0) (in 10 -12 units) a) 13.25 b) 22.13 c) 26.31 d) 31.52

Last Answer : b) 22.13

Calculate the mutual inductance of two tightly coupled coils with inductances 49H and 9H. a) 21 b) 58 c) 40 d) 49/9

Description : Calculate the mutual inductance of two tightly coupled coils with inductances 49H and 9H. a) 21 b) 58 c) 40 d) 49/9

Last Answer : a) 21

The inductance is proportional to the ratio of flux to current. State True/False. a) True b) False

Description : The inductance is proportional to the ratio of flux to current. State True/False. a) True b) False

Last Answer : a) True

Inductance is present in semiconductor. State True/False. a) True b) False

Description : Inductance is present in semiconductor. State True/False. a) True b) False

Last Answer : b) False

Find the energy of a coil of inductance 18mH and current passing through it 1.25A.(in 10 -3 order) a) 14.06 b) 61 c) 46.1 d) 28.12

Description : Find the energy of a coil of inductance 18mH and current passing through it 1.25A.(in 10 -3 order) a) 14.06 b) 61 c) 46.1 d) 28.12

Last Answer : a) 14.06

The inductance is the measure of a) Electric charges stored by the material b) Emf generated by energising the coil c) Magnetic field stored by the material d) Magnetization of dipoles

Description : The inductance is the measure of a) Electric charges stored by the material b) Emf generated by energising the coil c) Magnetic field stored by the material d) Magnetization of dipoles

Last Answer : c) Magnetic field stored by the material

Find the turns in an solenoid of inductance 23.4mH , current 2A and area 15cm. a) 900 b) 400 c) 498 d) 658

Description : Find the turns in an solenoid of inductance 23.4mH , current 2A and area 15cm. a) 900 b) 400 c) 498 d) 658

Last Answer : c) 498

Find the inductance when the energy is given by 2 units with a current of 16A. a) 15.6mH b) 16.5mH c) 16.8mH d) 15.8mH

Description : Find the inductance when the energy is given by 2 units with a current of 16A. a) 15.6mH b) 16.5mH c) 16.8mH d) 15.8mH

Last Answer : a) 15.6mH

The phase constant of a wave propagation with frequency of 35 radian/sec and time delay of 7.5 sec is a) 4.66 b) 262.5 c) 46.6 d) 26.25

Description : The phase constant of a wave propagation with frequency of 35 radian/sec and time delay of 7.5 sec is a) 4.66 b) 262.5 c) 46.6 d) 26.25

Last Answer : b) 262.5

A three-phase synchronous motor has a terminal voltage of 460 V and a terminal current of 120 A at a power factor of 0.95 lagging, synchronous reactance of 1.68 ohm and the field current is 47 A. The field to armature mutual inductance of the synchronous motor is _____________.

Description : A three-phase synchronous motor has a terminal voltage of 460 V and a terminal current of 120 A at a power factor of 0.95 lagging, synchronous reactance of 1.68 ohm and the field current is 47 A. The field to armature mutual ... _____________.      (a). 20mH   (b). 16mH   (c). 24mH   (d). 22mH

Last Answer : 22

A transmitted signal 5 meters in wavelength is received by an antenna coil having a 50-Ω resistance and a 0.01 H inductance. What is the capacitance of the tuner shunting the antenna coil at this point? A. 0.704 fF B. 0.704 μF C. 0.704 nF D. 0.704 mF

Description : A transmitted signal 5 meters in wavelength is received by an antenna coil having a 50-Ω resistance and a 0.01 H inductance. What is the capacitance of the tuner shunting the antenna coil at this point? A. 0.704 fF B. 0.704 μF C. 0.704 nF D. 0.704 mF

Last Answer : A. 0.704 fF

Find the potential of V = 60sin θ/r 2 at P(3,60,25) a) 5.774 b) 6.774 c) 7.774 d) 8.774

Description : Find the potential of V = 60sin θ/r 2 at P(3,60,25) a) 5.774 b) 6.774 c) 7.774 d) 8.774

Last Answer : a) 5.774

A coil =of inductance `L=50muH` and resistance =`0.5Omega` is connected to a battery of emf=5A. A resistance of `10Omega` is connected parallel to the

Description : A coil =of inductance `L=50muH` and resistance =`0.5Omega` is connected to a battery of emf=5A. A resistance of `10Omega` is connected parallel to the

Last Answer : A coil =of inductance `L=50muH` and resistance =`0.5Omega` is connected to a battery of emf=5A. A resistance ... is (0.02)x in mJ. Find valuie of x.

Find the potential of the function V = 60cos θ/r at the point P(3, 60, 25). a) 20 b) 10 c) 30 d) 60

Description : Find the potential of the function V = 60cos θ/r at the point P(3, 60, 25). a) 20 b) 10 c) 30 d) 60

Last Answer : b) 10

A infinite resistance is considered as a/an a) Closed path(short circuit) b) Open path c) Not defined d) Ammeter with zero reading

Description : A infinite resistance is considered as a/an a) Closed path(short circuit) b) Open path c) Not defined d) Ammeter with zero reading

Last Answer : b) Open path