A regenerator is a________ device. A) one-layer B) two-layer C) three-layer D) four-layer

A regenerator is a________ device.
A)
one-layer
B)
two-layer
C)
three-layer
D)
four-layer
by

1 Answer

Answer :

four-layer
by

Related questions

A ________ is a repeater. A) regenerator B) ADM C) STS multiplexer/demultiplexer D) none of the above

Description : A ________ is a repeater. A) regenerator B) ADM C) STS multiplexer/demultiplexer D) none of the above

Last Answer : STS multiplexer/demultiplexer

An STS multiplexer is a ______ device. A) one-layer B) two-layer C) three-layer D) four-layer

Description : An STS multiplexer is a ______ device. A) one-layer B) two-layer C) three-layer D) four-layer

Last Answer : two-layer

An add/drop multiplexer isa ______device. A) one-layerB)two-layerC)three-layerD)four-layer

Description : An add/drop multiplexer isa ______device. A) one-layer B) two-layer C) three-layer D) four-layer

Last Answer : three-layer

In TCP IP Model, when data is sent from device A to device B, the 5th layer to receive data at B is ____________ a.Application layer b.Transport layer c.Link layer d.Session layer

Description : In TCP IP Model, when data is sent from device A to device B, the 5th layer to receive data at B is ____________ a.Application layer b.Transport layer c.Link layer d.Session layer

Last Answer : a.Application layer

In OSI model, when data is sent from device A to device B, the 5th layer to receive data at B is _________ a. Application layer b. Transport layer c. Link layer d. Session layer

Description : In OSI model, when data is sent from device A to device B, the 5th layer to receive data at B is _________ a. Application layer b. Transport layer c. Link layer d. Session layer

Last Answer : d. Session layer

A layer-4 firewall (a device that can look at all protocol headers up to the transport layer) CANNOT a. block entire HTTP traffic during 9:00PM and 5 :0OAM b. block all ICMP trafficc. stop incoming traffic from a specific IP address but allow outgoing traffic to the same IP address d. block TCP traffic from a specific user on a multi-user system during 9:00PM and 5:00AM

Description : A layer-4 firewall (a device that can look at all protocol headers up to the transport layer) CANNOT a. block entire HTTP traffic during 9:00PM and 5 :0OAM b. block all ICMP traffic c. stop ... address d. block TCP traffic from a specific user on a multi-user system during 9:00PM and 5:00AM

Last Answer : d. block TCP traffic from a specific user on a multi-user system during 9:00PM and 5:00AM

The network layer contains which hardware device? a. Routers, Bridges b. Bridges onlyc. Bridges and switches d. Routers, Bridges and Switches

Description : The network layer contains which hardware device? a. Routers, Bridges b. Bridges only c. Bridges and switches d. Routers, Bridges and Switches

Last Answer : d. Routers, Bridges and Switches

.In TCP IP Model, when data is sent from device A to device B, the 5th layer to receive data at B is ____________ a. Application layer b. Transport layer c. Link layer d. Session layer

Description : .In TCP IP Model, when data is sent from device A to device B, the 5th layer to receive data at B is ____________ a. Application layer b. Transport layer c. Link layer d. Session layer

Last Answer : a. Application layer

In OSI model, when data is sent from device A to device B, the 5th layer to receive data at B is _________ a. Application layer b. Transport layer c. Link layer d. Session layer

Description : In OSI model, when data is sent from device A to device B, the 5th layer to receive data at B is _________ a. Application layer b. Transport layer c. Link layer d. Session layer

Last Answer : d. Session layer

In OSI model, when data is sent from device A to device B, the 5th layer to receive data at B is _________ a) Application layerb) Transport layer c) Link layer d) Session layer

Description : In OSI model, when data is sent from device A to device B, the 5th layer to receive data at B is _________ a) Application layer b) Transport layer c) Link layer d) Session layer

Last Answer : d) Session layer

Which of the following statements accurately describe the differences between a hub and a switch? Check all that apply. A. A switch remembers which devices are connected on each interface, while a hub does not. B. A hub is a physical layer device, and a switch is a data link layer device. C. A hub causes larger collision domains. D. Hubs are more sophisticated versions of switches. a. A,B b. A,B,C c. A,B,C,D d. A,C,D

Description : Which of the following statements accurately describe the differences between a hub and a switch? Check all that apply. A. A switch remembers which devices are connected on each interface, while a hub does not. B. A hub is a ... versions of switches. a. A,B b. A,B,C c. A,B,C,D d. A,C,D

Last Answer : b. A,B,C

A device operating at Physical layer is called a. Repeater b. Gateway c. Router d. Bridge

Description : A device operating at Physical layer is called a. Repeater b. Gateway c. Router d. Bridge

Last Answer : a. Repeater

A device operating at network layer is called a. Repeater b. Router c. Gateway d. Bridge

Description : A device operating at network layer is called a. Repeater b. Router c. Gateway d. Bridge

Last Answer : b. Router

Cloud Services have a________ relationship with their customers.A. Many-to-many B. One-to-many C. One-to-one

Description : Cloud Services have a________ relationship with their customers.A. Many-to-many B. One-to-many C. One-to-one

Last Answer : One-to-many

Cloud Services have a________ relationship with their customers. A. Many-to-many B. One-to-many C. One-to-one

Description : Cloud Services have a________ relationship with their customers. A. Many-to-many B. One-to-many C. One-to-one

Last Answer : One-to-many

Water tube boilers produces steam at a________ pressure than that of fire tube boilers. a) Higher b) Lower c) Same d) None of the above

Description : Water tube boilers produces steam at a________ pressure than that of fire tube boilers. a) Higher b) Lower c) Same d) None of the above

Last Answer : a) Higher

The greatest security for a banker is that a________ a. Bill of Exchange b. Mutual fund c. Commercial Paper

Description : The greatest security for a banker is that a________ a. Bill of Exchange b. Mutual fund c. Commercial Paper

Last Answer : a. Bill of Exchange

IFCI has been converted into a________. A. joint stock company. B. co-operative society. C. partnership firm. D. sole proprietorship.

Description : IFCI has been converted into a________. A. joint stock company. B. co-operative society. C. partnership firm. D. sole proprietorship.

Last Answer : A. joint stock company.

Sensible heat of hot industrial flue gases cannot be recovered by a/an (A) Economiser (B) Regenerator (C) Ceramic recuperator (D) None of these

Description : Sensible heat of hot industrial flue gases cannot be recovered by a/an (A) Economiser (B) Regenerator (C) Ceramic recuperator (D) None of these

Last Answer : (D) None of these

In which of the waste heat recovery equipment, the flow of flue gas and air is alternately reversed after a fixed interval of time? (A) Recuperator (B) Regenerator (C) Waste heat boiler (D) None of these

Description : In which of the waste heat recovery equipment, the flow of flue gas and air is alternately reversed after a fixed interval of time? (A) Recuperator (B) Regenerator (C) Waste heat boiler (D) None of these

Last Answer : (B) Regenerator

Which of the following is the most suitable for preheating combustion air above 650°C? (A) Regenerator (B) Metallic recuperator (C) Ceramic recuperator (D) None of these

Description : Which of the following is the most suitable for preheating combustion air above 650°C? (A) Regenerator (B) Metallic recuperator (C) Ceramic recuperator (D) None of these

Last Answer : (C) Ceramic recuperator

Which of the following is not a continuous waste heat recovery equipment from the flue gases going out of furnace? (A) Economiser (B) Regenerator (C) Ceramic recuperator (D) Waste heat boiler

Description : Which of the following is not a continuous waste heat recovery equipment from the flue gases going out of furnace? (A) Economiser (B) Regenerator (C) Ceramic recuperator (D) Waste heat boiler

Last Answer : (B) Regenerator

Pick up the odd one out: b) Regenerator c) Recuperator d) Metallic recuperator e) Economiser

Description : Pick up the odd one out: b) Regenerator c) Recuperator d) Metallic recuperator e) Economiser

Last Answer : Economiser

Capillary wick is a part of a) heat pump b) heat wheel c) heat pipe d) regenerator

Description : Capillary wick is a part of a) heat pump b) heat wheel c) heat pipe d) regenerator

Last Answer : heat pipe

Regenerator is widely used in: a) Reheating Furnaces b) heat treatment furnaces c) Baking Ovens d) glass melting furnaces

Description : Regenerator is widely used in: a) Reheating Furnaces b) heat treatment furnaces c) Baking Ovens d) glass melting furnaces

Last Answer : glass melting furnaces

The use of regenerator in a gas turbine cycle

Description : The use of regenerator in a gas turbine cycle  (1) increases efficiency but has no effect on output (2) increases output but has no effect on efficiency (3) increases both efficiency and output (4) increases efficiency but decreases output

Last Answer : The use of regenerator in a gas turbine cycle increases efficiency but has no effect on output

In IEEE 802.11, the MAC layer framehas ______ fields. A) four B) five C) six D) none of the above

Description : In IEEE 802.11, the MAC layer framehas ______ fields. A) four B) five C) six D) none of the above

Last Answer : four

TCP/IP layer corresponds to the OSI models to three layers. A) Application B) Presentation C) Session D) Transport

Description : TCP/IP layer corresponds to the OSI models to three layers. A) Application B) Presentation C) Session D) Transport

Last Answer : A) Application

Which of the following is NOT true about User Datagram Protocol in transport layer?a. Works well in unidirectional communication, suitable for broadcast information. b. It does three way handshake before sending datagrams c. It provides datagrams, suitable for modeling other protocols such as in IP tunneling or Remote Procedure Call and the Network File System d. The lack of retransmission delays makes it suitable for real-time applications

Description : Which of the following is NOT true about User Datagram Protocol in transport layer? a. Works well in unidirectional communication, suitable for broadcast information. b. It does three way ... File System d. The lack of retransmission delays makes it suitable for real-time applications

Last Answer : b. It does three way handshake before sending datagrams

The Post Office Protocol is an ………... protocol with both client (sender/receiver) and …………...functions A. electronic mail, server (storage) B. three layer , server C. UDP, transfer D. TCP, server

Description : The Post Office Protocol is an ………... protocol with both client (sender/receiver) and …………...functions A. electronic mail, server (storage) B. three layer , server C. UDP, transfer D. TCP, server

Last Answer : A. electronic mail, server (storage)

A Bluetooth network consists of _____primary device(s)and up to____ secondary devices. A) one; five B) five; three C) two; six D) one; seven

Description : A Bluetooth network consists of _____primary device(s)and up to____ secondary devices. A) one; five B) five; three C) two; six D) one; seven

Last Answer : one; seven

The functions of a Logical Link Layer (LLC) are a. Error control b. Flow control c. Creating and managing the communication link between two devices with the help of the Transport layer. d. All the above

Description : The functions of a Logical Link Layer (LLC) are a. Error control b. Flow control c. Creating and managing the communication link between two devices with the help of the Transport layer. d. All the above

Last Answer : d. All the above

The two sublayers of a Data Link layer are a. LLC Logical Link Control Layer b. MAC Medium Access Control Layer c. Both A and B d. Data Layer

Description : The two sublayers of a Data Link layer are a. LLC Logical Link Control Layer b. MAC Medium Access Control Layer c. Both A and B d. Data Layer

Last Answer : c. Both A and B

The purpose of a proxy server is to control exchange of data between the two networks at …………..instead of ……….. A. an application level , an IP level B. network layer, physical layer C. an application layer, physical layer D. Network layer , an application layer

Description : The purpose of a proxy server is to control exchange of data between the two networks at …………..instead of ……….. A. an application level , an IP level B. network layer, physical layer C. an application layer, physical layer D. Network layer , an application layer

Last Answer : A. an application level , an IP level

Header of a Layer two frame usually contain ______________ A. synchronization bytes B. addresses C. frame identifier D. all of the mentioned

Description : Header of a Layer two frame usually contain ______________ A. synchronization bytes B. addresses C. frame identifier D. all of the mentioned

Last Answer : D. all of the mentioned

The functions of a Logical Link Layer (LLC) are ___. A. Error control B. Flow control C. Creating and managing the communication link between two devices with the help of the Transport layer. D. All the above

Description : The functions of a Logical Link Layer (LLC) are ___. A. Error control B. Flow control C. Creating and managing the communication link between two devices with the help of the Transport layer. D. All the above

Last Answer : D. All the above

What does SSL stands for ? System socket layer Secure system login Secure socket layeSecure system loginr

Description : What does SSL stands for ? System socket layer Secure system login Secure socket layer Secure system login

Last Answer : Secure socket layer

Hard disk is coated in both side above a. Magnetic metallic oxide b. Optical metallic oxide c. Carbon layer d. All of the above

Description : Hard disk is coated in both side above a. Magnetic metallic oxide b. Optical metallic oxide c. Carbon layer d. All of the above

Last Answer : Magnetic metallic oxide

What is the minimum number of wires needed to send data over a serial communication link layer? a. 1 b. 2 c. 4 d. 6 e. none of above

Description : What is the minimum number of wires needed to send data over a serial communication link layer? a. 1 b. 2 c. 4 d. 6 e. none of above

Last Answer : 2

Layer one of the OSI model is a. physical layer b. link layer c. transport layer d. network layer e. none of above

Description : Layer one of the OSI model is a. physical layer b. link layer c. transport layer d. network layer e. none of above

Last Answer : physical layer

In OSI network architecture, the routing is performed by a. network layer b. data link layer c. transport layer d. session layer e. none of above

Description : In OSI network architecture, the routing is performed by a. network layer b. data link layer c. transport layer d. session layer e. none of above

Last Answer : network layer

In OSI network architecture, the dialogue control and token management are responsibility of a. session layer b. network layer c. transport layer d. data link layer e. none of above

Description : In OSI network architecture, the dialogue control and token management are responsibility of a. session layer b. network layer c. transport layer d. data link layer e. none of above

Last Answer : session layer

Bluetooth uses ______method in thephysical layer to avoid interference from other devicesor othernetworks. A) DSSS B) FHSS C) FDMA D) none of the above

Description : Bluetooth uses ______method in thephysical layer to avoid interference from other devicesor othernetworks. A) DSSS B) FHSS C) FDMA D) none of the above

Last Answer : FHSS

In Bluetooth, the_______ layer is roughly equivalent to thephysical layer of theInternet model. A) radio B) baseband C) L2CAP D) none of the above

Description : In Bluetooth, the_______ layer is roughly equivalent to thephysical layer of theInternet model. A) radio B) baseband C) L2CAP D) none of the above

Last Answer : radio

In the Ethernet, the _______field is actually added at the physical layer and isnot (formally)part of the frame. A) CRC B) preamble C) address D) none of the above

Description : In the Ethernet, the _______field is actually added at the physical layer and isnot (formally)part of the frame. A) CRC B) preamble C) address D) none of the above

Last Answer : preamble

The purpose of the _______is to provide flow and error control for the upper-layer protocols that actually demand theseservices A) MAC B) LLC C) LLU D) none of the above

Description : The purpose of the _______is to provide flow and error control for the upper-layer protocols that actually demand theseservices A) MAC B) LLC C) LLU D) none of the above

Last Answer : LLC

The _______ layer of Ethernet consistsof the LLC sublayer and the MAC sublayer. A) data link B) physical C) network D) none of the above

Description : The _______ layer of Ethernet consistsof the LLC sublayer and the MAC sublayer. A) data link B) physical C) network D) none of the above

Last Answer : data link

A ________operates in both thephysical andthe data link layer. A) passive hub B) repeater C) bridge D) router

Description : A ________operates in both thephysical andthe data link layer. A) passive hub B) repeater C) bridge D) router

Last Answer : bridge

_______ ispart of the media; its location in the Internet model is below thephysical layer. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Description : _______ ispart of the media; its location in the Internet model is below thephysical layer. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Last Answer : A passivehub

A repeater is a connecting devicethat operates in the _______ layer of theInternet model. A) physical B) data link C) network D) all of theabove

Description : A repeater is a connecting devicethat operates in the _______ layer of theInternet model. A) physical B) data link C) network D) all of theabove

Last Answer : physical