In the Ethernet, the _______field is actually added at the physical layer and isnot (formally)part of the frame. A) CRC B) preamble C) address D) none of the above

In the Ethernet, the _______field is actually added at the physical layer and isnot (formally)part of the frame.
A)
CRC
B)
preamble
C)
address
D)
none of the above
by

1 Answer

Answer :

preamble
by

Related questions

In the Ethernet frame, the_______field contains error detection information. A) CRC B) preamble C) address D) none of the above

Description : In the Ethernet frame, the_______field contains error detection information. A) CRC B) preamble C) address D) none of the above

Last Answer : CRC

Which of the following statements is TRUE? a. Both Ethernet frame and IP packet include checksum fields b. Ethernet frame includes a checksum field and IP packet includes a CRC field c. Ethernet frame includes a CRC field and IP packet includes a checksum field d. Both Ethernet frame and IP packet include CRC fields

Description : Which of the following statements is TRUE? a. Both Ethernet frame and IP packet include checksum fields b. Ethernet frame includes a checksum field and IP packet includes a CRC field c. Ethernet ... and IP packet includes a checksum field d. Both Ethernet frame and IP packet include CRC fields

Last Answer : Ethernet frame includes a CRC field and IP packet includes a checksum field

What is the difference between the Ethernet frame preamble field and the IEEE 802.3 preamble and start of frame Delimiter fields? a. 1 byte b. 1 bit c. 4 bit d. 16 bit

Description : What is the difference between the Ethernet frame preamble field and the IEEE 802.3 preamble and start of frame Delimiter fields? a. 1 byte b. 1 bit c. 4 bit d. 16 bit

Last Answer : a. 1 byte

Inthe _________ method, after the station finds the lineidle, it sends its frame immediately. If the line isnot idle, it continuously senses theline until it finds it idle. A) nonpersistent B) 1-persistent C) p-persistent D) none of the above

Description : Inthe _________ method, after the station finds the lineidle, it sends its frame immediately. If the line isnot idle, it continuously senses theline until it finds it idle. A) nonpersistent B) 1-persistent C) p-persistent D) none of the above

Last Answer : 1-persistent

If the frame to be transmitted is 1101011011 and the CRC polynomial to be used for generating checksum is x 4+ x + 1, then what is the transmitted frame? a. 11010110111011 b. 11010110111101 c. 11010110111110 d. 11010110111001

Description : If the frame to be transmitted is 1101011011 and the CRC polynomial to be used for generating checksum is x 4+ x + 1, then what is the transmitted frame? a. 11010110111011 b. 11010110111101 c. 11010110111110 d. 11010110111001

Last Answer : c. 11010110111110

Let G(x) be the generator polynomial used for CRC checking. What is the condition that should be satisfied by G(x) to detect odd number of bits in error? a. G(x) contains more than two terms b. G(x) does not divide 1+x^k, for any k not exceeding the frame length c. 1+x is a factor of G(x) d. G(x) has an odd number of terms

Description : Let G(x) be the generator polynomial used for CRC checking. What is the condition that should be satisfied by G(x) to detect odd number of bits in error? a. G(x) contains more than two terms b. G(x) does ... exceeding the frame length c. 1+x is a factor of G(x) d. G(x) has an odd number of terms

Last Answer : c. 1+x is a factor of G(x)

In Ethernet CSMA/CD, the special bit sequence transmitted by media access management to handle collision is called a. Preamble b. Postamble c. Jam d. None of the above

Description : In Ethernet CSMA/CD, the special bit sequence transmitted by media access management to handle collision is called a. Preamble b. Postamble c. Jam d. None of the above

Last Answer : c. Jam

Which of the following can be an Ethernet physical address? A. 01:02:01:2C:4B B. 07:01:02:01:2C:4B:2C C. 07:01:02:01:2C:4B D. none of the above

Description : Which of the following can be an Ethernet physical address? A. 01:02:01:2C:4B B. 07:01:02:01:2C:4B:2C C. 07:01:02:01:2C:4B D. none of the above

Last Answer : C. 07:01:02:01:2C:4B

Which of the following can be an Ethernet physical address? A. 01:02:01:2C:4B B. 07:01:02:01:2C:4B:2C C. 07:01:02:01:2C:4B D. none of the above

Description : Which of the following can be an Ethernet physical address? A. 01:02:01:2C:4B B. 07:01:02:01:2C:4B:2C C. 07:01:02:01:2C:4B D. none of the above

Last Answer : C. 07:01:02:01:2C:4B

The _______ layer of Ethernet consistsof the LLC sublayer and the MAC sublayer. A) data link B) physical C) network D) none of the above

Description : The _______ layer of Ethernet consistsof the LLC sublayer and the MAC sublayer. A) data link B) physical C) network D) none of the above

Last Answer : data link

What is the main difference between DDCMP and SDLC? a. DDCMP does not need special hardware to final the beginning of a message b. DDCMP has a message header c. SDLC has a IP address d. SDLC does not use CRC

Description : What is the main difference between DDCMP and SDLC? a. DDCMP does not need special hardware to final the beginning of a message b. DDCMP has a message header c. SDLC has a IP address d. SDLC does not use CRC

Last Answer : DDCMP does not need special hardware to final the beginning of a message

In IPv6,a _______address is usedif aLAN uses the Internet protocols but isnot connected tothe Internet for security reasons. A) link local B) site local C) mapped D) none of the above

Description : In IPv6,a _______address is usedif aLAN uses the Internet protocols but isnot connected tothe Internet for security reasons. A) link local B) site local C) mapped D) none of the above

Last Answer : link local

Which of the following isnot a valid version of MS Office? A. Office 4 B. Office97 C. Office 98 D. Office2000

Description : Which of the following isnot a valid version of MS Office? A. Office 4 B. Office97 C. Office 98 D. Office2000

Last Answer : Office 98

Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control)c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Description : Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control) c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Last Answer : d. All the above

- MAC is to Ethernet what ________ is to Frame Relay. A. DLCI B. LCI C. PVC D. None of the above

Description : - MAC is to Ethernet what ________ is to Frame Relay. A. DLCI B. LCI C. PVC D. None of the above

Last Answer : DLCI

The maximum frame length for 10-Mbps Ethernet is ________ bytes. A) 1518 B) 1500 C) 1200 D) none of the abov

Description : The maximum frame length for 10-Mbps Ethernet is ________ bytes. A) 1518 B) 1500 C) 1200 D) none of the abov

Last Answer : 1518

The minimum frame length for 10-Mbps Ethernet is _______bytes. A) 32 B) 80 C) 128 D) none of the above

Description : The minimum frame length for 10-Mbps Ethernet is _______bytes. A) 32 B) 80 C) 128 D) none of the above

Last Answer : none of the above

An IGMP packet is carried in an __________ packet. A) UDP B) IP C) Ethernet frame D) noneof the above

Description : An IGMP packet is carried in an __________ packet. A) UDP B) IP C) Ethernet frame D) noneof the above

Last Answer : IP

Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Description : Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Last Answer : d. 256

In an Ethernet local area network, which one of the following statements is TRUE ? a. A station stops to sense the channel once it starts transmitting a frame. b. The purpose of the jamming signal is to pad the frames that are smaller than the minimum frame size. c. A station continues to transmit the packet even after the collision is detected. d. The exponential backoff mechanism reduces the probability of collision on retransmissions

Description : In an Ethernet local area network, which one of the following statements is TRUE ? a. A station stops to sense the channel once it starts transmitting a frame. b. The purpose ... collision is detected. d. The exponential backoff mechanism reduces the probability of collision on retransmissions

Last Answer : The exponential backoff mechanism reduces the probability of collision on retransmissions

Suppose the round trip propagation delay for a 10 Mbps Ethernet having 48-bit jamming signal is 46.4 ms. The minimum frame size is a. 94 b. 416 c. 464

Description : Suppose the round trip propagation delay for a 10 Mbps Ethernet having 48-bit jamming signal is 46.4 ms. The minimum frame size is a. 94 b. 416 c. 464

Last Answer : c. 464

Frame Relay has_______. A) only the physical layer B) only thedata link C) the physical and data link layers D) the physical, data link, andnetwork layers

Description : Frame Relay has_______. A) only the physical layer B) only thedata link C) the physical and data link layers D) the physical, data link, andnetwork layers

Last Answer : the physical and data link layers

The layer of OSI model can use the trailer of the frame for error detection. A) Physical B) Data link C) Transport D) Presentation

Description : The layer of OSI model can use the trailer of the frame for error detection. A) Physical B) Data link C) Transport D) Presentation

Last Answer : A) Physical

In Ethernet addressing, ifall the bits are 1s, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Description : In Ethernet addressing, ifall the bits are 1s, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : broadcast

In Ethernet addressing, if the least significant bit of the firstbyte is 1, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Description : In Ethernet addressing, if the least significant bit of the firstbyte is 1, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : multicast

In Ethernet addressing, if the least significant bit of the firstbyte is 0, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Description : In Ethernet addressing, if the least significant bit of the firstbyte is 0, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : unicast

Each station on an Ethernet network has a unique _______ address imprinted onits network interface card (NIC). A) 5-byte B) 32-bit C) 48-bit D) none of the above

Description : Each station on an Ethernet network has a unique _______ address imprinted onits network interface card (NIC). A) 5-byte B) 32-bit C) 48-bit D) none of the above

Last Answer : 48-b

If an Ethernet destination address is08:07:06:05:44:33, then this is a ______ address. A) unicast B) multicast C) broadcast D) any of theabove

Description : If an Ethernet destination address is08:07:06:05:44:33, then this is a ______ address. A) unicast B) multicast C) broadcast D) any of theabove

Last Answer : unicast

f an Ethernet destination address is07:01:02:03:04:05, then this is a ______ address. A) unicast B) multicast C) broadcast D) any of theabove

Description : f an Ethernet destination address is07:01:02:03:04:05, then this is a ______ address. A) unicast B) multicast C) broadcast D) any of theabove

Last Answer : multicast

. What is the hexadecimal equivalentof the Ethernet address 01011010 0001000101010101 00011000 10101010 00001111? A) 5A:88:AA:18:55:F0 B) 5A:81:BA:81:AA:0F C) 5A:18:5A:18:55:0F D) 5A:11:55:18:AA:0F

Description : . What is the hexadecimal equivalentof the Ethernet address 01011010 0001000101010101 00011000 10101010 00001111? A) 5A:88:AA:18:55:F0 B) 5A:81:BA:81:AA:0F C) 5A:18:5A:18:55:0F D) 5A:11:55:18:AA:0F

Last Answer : 5A:11:55:18:AA:0F

The least significant 23 bits in a 48-bit Ethernet address identify a ________. A) multicast router B) host C) multicast group D) noneof the above

Description : The least significant 23 bits in a 48-bit Ethernet address identify a ________. A) multicast router B) host C) multicast group D) noneof the above

Last Answer : multicast group

The target hardware address on an Ethernet is _______ in an ARP request. A) 0x000000000000 B) 0.0.0.0 C) variable D) class dependent

Description : The target hardware address on an Ethernet is _______ in an ARP request. A) 0x000000000000 B) 0.0.0.0 C) variable D) class dependent

Last Answer : 0x000000000000

Transport layer is implemented in _________ a. End system b. NIC c. Ethernet d. Signal transmission

Description : Transport layer is implemented in _________ a. End system b. NIC c. Ethernet d. Signal transmission

Last Answer : a. End system

Application layer is implemented in _______ a. End system b. NIC c. Ethernet d. Packet transport

Description : Application layer is implemented in _______ a. End system b. NIC c. Ethernet d. Packet transport

Last Answer : a. End system

Application layer is implemented in ____________ a) End system b) NIC c) Ethernet d) Packet transport

Description : Application layer is implemented in ____________ a) End system b) NIC c) Ethernet d) Packet transport

Last Answer : a) End system

The portion of physical layer that interfaces with the media access control sublayer is called ___________ a. physical signalling sublayer b. physical data sublayer c. physical address sublayer d. physical transport sublayer

Description : The portion of physical layer that interfaces with the media access control sublayer is called ___________ a. physical signalling sublayer b. physical data sublayer c. physical address sublayer d. physical transport sublayer

Last Answer : a. physical signalling sublayer

The physical address to each machine is provided by which layer in an OSI reference model? A. Physical layer B. Data Link Layer C. Network Layer D. Transport Layer

Description : The physical address to each machine is provided by which layer in an OSI reference model? A. Physical layer B. Data Link Layer C. Network Layer D. Transport Layer

Last Answer : B. Data Link Layer

The physical address to each machine is provided by which layer in an OSI reference model? A. Physical layer B. Data Link Layer C. Network Layer D. Transport Layer

Description : The physical address to each machine is provided by which layer in an OSI reference model? A. Physical layer B. Data Link Layer C. Network Layer D. Transport Layer

Last Answer : B. Data Link Layer

Which address is used to identify a process on a host by the transport layer? a) physical address b) logical address c) port address d) specific address

Description : Which address is used to identify a process on a host by the transport layer? a) physical address b) logical address c) port address d) specific address

Last Answer : c) port address

MAC Address is the example of a. Transport Layer b. Data Link Layer c. Application Layer d. Physical Layer

Description : MAC Address is the example of a. Transport Layer b. Data Link Layer c. Application Layer d. Physical Layer

Last Answer : b. Data Link Layer

. In cyclic redundancy checking, the divisor is _______the CRC. A) The same size as B) one bit less than C) one bit more than D) none of the above

Description : . In cyclic redundancy checking, the divisor is _______the CRC. A) The same size as B) one bit less than C) one bit more than D) none of the above

Last Answer : one bit more than

Which error detection method consists of just one redundant bit per data unit? A) Simple parity check B) Two-dimensionalparity check C) CRC D) Checksum

Description : Which error detection method consists of just one redundant bit per data unit? A) Simple parity check B) Two-dimensionalparity check C) CRC D) Checksum

Last Answer : Simple parity check

Which error detection method usesone's complement arithmetic? A) Simple parity check B) Two-dimensionalparity check C) CRC D) Checksum

Description : Which error detection method usesone's complement arithmetic? A) Simple parity check B) Two-dimensionalparity check C) CRC D) Checksum

Last Answer : Checksum

_______ can detect burst error of length less than or equal to degree of the polynomial and detects burst errors that affect odd number of bits. a. Hamming Code b. CRC c. VRC d. None of the above

Description : _______ can detect burst error of length less than or equal to degree of the polynomial and detects burst errors that affect odd number of bits. a. Hamming Code b. CRC c. VRC d. None of the above

Last Answer : b. CRC

In CRC if the data unit is 100111001 and the divisor is 1011 then what is dividend at the receiver? a. 100111001101 b. 100111001011 c. 100111001 d. 100111001110

Description : In CRC if the data unit is 100111001 and the divisor is 1011 then what is dividend at the receiver? a. 100111001101 b. 100111001011 c. 100111001 d. 100111001110

Last Answer : b. 100111001011

The message 11001001 is to be transmitted using the CRC polynomial x^3 + 1 to protect it from errors. The message that should be transmitted is: a. 11001001000 b. 11001001011 c. 11001010 d. 110010010011

Description : The message 11001001 is to be transmitted using the CRC polynomial x^3 + 1 to protect it from errors. The message that should be transmitted is: a. 11001001000 b. 11001001011 c. 11001010 d. 110010010011

Last Answer : b. 11001001011

CRC stands for __________ a. cyclic redundancy check b. code repeat check c. code redundancy check d. cyclic repeat check

Description : CRC stands for __________ a. cyclic redundancy check b. code repeat check c. code redundancy check d. cyclic repeat check

Last Answer : a. cyclic redundancy check

Which error detection method uses one's complement arithmetic? A. Simple parity check B. Two-dimensional parity check C. CRC D. Checksum

Description : Which error detection method uses one's complement arithmetic? A. Simple parity check B. Two-dimensional parity check C. CRC D. Checksum

Last Answer : D. Checksum

CRC stands for __________ A. cyclic redundancy check B. code repeat check C. code redundancy check D. cyclic repeat check

Description : CRC stands for __________ A. cyclic redundancy check B. code repeat check C. code redundancy check D. cyclic repeat check

Last Answer : A. cyclic redundancy check

Write short notes on CRC checker.

Description : Write short notes on CRC checker.

Last Answer : After receiving the data appended with the CRC it does the same modulo-2 division. If the remainder is all 0’s the CRC is dropped and the data accepted. Otherwise, the received stream of bits is discarded and the data are resent.