Description : ______ cables arecomposed ofa glass or plastic inner core surrounded by cladding, allencasedin an outside jacket. A) Coaxial B) Fiber-optic C) Twisted-pair D) none of the above
Last Answer : Fiber-optic
Description : ……cables are composed of a glass or plastic inner core surrounded by cladding,all encased in an outside jacket. a. Fiber-optic b. Coaxial c. Shield Twisted Pair d. Unshield Twisted-pair
Last Answer : a. Fiber-optic
Description : The inner core ofan optical fiber is _______ in composition. A) glass or plastic B) copper C) bimetallic D) liquid
Last Answer : glass or plastic
Description : The inner core of an optical fiber is in composition. a. copper b. liquid c. glass or plastic d. bimetallic
Last Answer : c. glass or plastic
Description : The core of an optical fiber has a a. Lower refracted index than air b. Lower refractive index than the cladding c. Higher refractive index than the cladding d. Similar refractive index with the cladding
Last Answer : c. Higher refractive index than the cladding
Description : The core of the optical fiber has ______. A. A medium index of refraction B. A lower index of refraction than the cladding C. A lower index of refraction than air D. A higher index of refraction than the cladding
Last Answer : D. A higher index of refraction than the cladding
Description : The core of an optical fiber has a ∙ a. Lower refracted index than air ∙ b. Lower refractive index than the cladding ∙ c. Higher refractive index than the cladding ∙ d. Similar refractive index with the cladding
Description : The inner portion of the fiber cable is called a. Cladding b. Coating c. Inner conductor d. Core
Last Answer : d. Core
Description : The inner portion of the fiber cable is called ∙ a. Cladding ∙ b. Coating ∙ c. Inner conductor ∙ d. Core
Last Answer : ∙ d. Core
Description : The index of refraction measures the speed of light in an optical fiber. Will light travel faster in an optically dense material or in one that is less dense?
Last Answer : Light will travel faster in an optical material that is less dense.
Description : ECE Board Exam March 1996 That dielectric material of an optical fiber surrounding the core A. Cladding B. Armor C. Shield D. Cover
Last Answer : A. Cladding
Description : Give two reasons why optical fiber manufacturers depart from the traditional circular core and cladding, low-loss glass fiber design?
Last Answer : To increase performance and reduce cost
Description : A type of index of an optical fiber that has no cladding and whose central core has a non-uniform refractive index. ∙ A. graded index ∙ B. multimode ∙ C. single mode ∙ D. step-index
Last Answer : ∙ A. graded index
Description : A type of index profile of an optical fiber that has a central core and outside cladding with a uniform refractive index ∙ A. multimode ∙ B. graded index ∙ C. step-index ∙ D. single mode
Last Answer : ∙ C. step-index
Description : PIM-DM is used in a _______ multicast environment, suchas a LAN. A) dense B) sparse C) a or b D) none of the above
Last Answer : dense
Description : Another name for the cable TV office is the _______. A) splitter B) fiber node C) combiner D) head end
Last Answer : head end
Description : ______ cable consists of an inner copper core and asecond conductingouter sheath. A) Twisted-pair B) Coaxial C) Fiber-optic D) Shielded twisted-pair
Last Answer : Coaxial
Description : How much power (roughly) a light emitting diode can couple into an optical fiber? a. 100 microwatts b. 440 microwatts c. 100 picowatts d. 10 miliwatts
Last Answer : 100 microwatts
Description : What type of communication media is the most widely usedcabling for data transfer today? A) Cat 5 B) Twisted pair C) Coaxial D) Optical fiber
Last Answer : Cat 5
Description : Which of the following uses a very thin glass or plastic fiber through which pulses of light travel? a. Cat 1 b. Optical fiber c. Twisted pair d. Coax
Last Answer : b. Optical fiber
Description : The physical layer provides __________ a. mechanical specifications of electrical connectors and cables b. electrical specification of transmission line signal level c. specification for IR over optical fiber d. all of the mentioned
Last Answer : d. all of the mentioned
Description : Which transmission media provides the highest transmission speed in a network? a. coaxial cable b. twisted pair cable c. optical fiber d. electrical cable
Last Answer : c. optical fiber
Description : Identify the non suitable medium for 802.3 ethernet? a. A thin coaxial cable b. A twisted pair cable c. A microwave link d. A fiber optical cable
Last Answer : c. A microwave link
Description : Maximum data transfer rate of the optical fiber is……….? a. 50 kbps b. 1000 kbps c. 1000 Mbps d. None of the these
Last Answer : c. 1000 Mbps
Description : The main hardware components of a graphics workstation are …………… A. Thick coax, optical fiber B. twisted pair , thin coax C. twisted, optical fiber D. Thick coax, Thin coax
Last Answer : D. Thick coax, Thin coax
Description : The physical layer provides __________ A. mechanical specifications of electrical connectors and cables B. electrical specification of transmission line signal level C. specification for IR over optical fiber D. all of the mentioned
Last Answer : D. all of the mentioned
Description : What specifications does physical layer provides __________. A. mechanical specifications of electrical connectors and cables B. electrical specification of transmission line signal level C. specification for IR over optical fiber D. all of the mentioned
Description : Which of the following cannot be used as a medium for 802.3 ethernet? a) A thin coaxial cable b) A twisted pair cable c) A microwave link d) A fiber optical cable
Last Answer : c) A microwave link
Description : What kind of transmission medium is most appropriate to carry data in a computer network that is exposed to electrical interferences? a) Unshielded twisted pair b) Optical fiber c) Coaxial cable d) Microwave
Last Answer : b) Optical fiber
Description : Which of this is not a guided media? a) Fiber optical cable b) Coaxial cable c) Wireless LAN d) Copper wire
Last Answer : c) Wireless LAN
Description : The physical layer provides __________ a) mechanical specifications of electrical connectors and cables b) electrical specification of transmission line signal level c) specification for IR over optical fiber d) all of the mentioned
Last Answer : d) all of the mentioned
Description : Which transmission media provides the highest transmission speed in a network? a) coaxial cable b) twisted pair cable c) optical fiber d) electrical cable
Last Answer : c) optical fiber
Description : Optical fibers for telecommunications are typically about _____ mils thick and consists of a glass core, a glass cladding of lower index of refraction, and a protective coating ∙ a. 5 ∙ b. 6 ∙ c. 7 ∙ d. 8
Last Answer : ∙ a. 5
Description : The core of a fiber optic is surrounded by a. Wire braid shield b. Kevlar c. Cladding d. Plastic insulation
Last Answer : c. Cladding
Description : Which fiber cladding, matched or depressed, consists of two regions?
Last Answer : Depressed.
Description : As the core and cladding modes travel along the fiber, mode coupling occurs. What is mode coupling?
Last Answer : Mode coupling is the exchange of power between two modes.
Description : The core of fiber-optic cable is surrounded by ∙ A. wire braid shield ∙ B. Keviar ∙ C. cladding ∙ D. plastic insulation
Last Answer : ∙ C. cladding
Description : What phenomenon will result if the glass fiber is exposed to long periods of high humidity? ∙ A. stress fatigue ∙ B. core corrosion ∙ C. stress corrosion ∙ D. cladding corrosion
Last Answer : stress corrosion
Description : The three essential types of fiber commonly used today except: ∙ A. Plastic core and cladding ∙ B. Plastic core and glass cladding ∙ C. Glass core and glass cladding (SCS) ∙ D. Glass core and plastic cladding (PCS)
Last Answer : B. Plastic core and glass cladding
Description : ____ is applied to protect core and cladding of the fiber ∙ a. Insulation ∙ b. Fiber insulation ∙ c. Silica ∙ d. Polymer jacket
Last Answer : d. Polymer jacket
Description : In fiber optics, higher-order mode refers to ∙ a. Cladding boundary at high angle ∙ b. Backscattering electromagnetic signals ∙ c. Diffracting signals ∙ d. All of these
Last Answer : ∙ a. Cladding boundary at high angle
Description : The core of a fiber optic is surrounded by ∙ a. Wire braid shield ∙ b. Kevlar ∙ c. Cladding ∙ d. Plastic insulation
Last Answer : ∙ c. Cladding
Description : The HFC network uses _______ cable. A) twisted-pair B) coaxial C) fiber-optic D) acombination of (b) and (c)
Last Answer : fiber-optic
Description : The local loop has _______ cablethat connects the subscriber telephonetothe nearest end office. A) twisted-pair B) coaxial C) fiber-optic D) none of the above
Last Answer : twisted-pair
Description : In a fiber-optic cable, the signal is propagatedalong theinner core by _______. A) reflection B) refraction C) modulation D) none of the above
Last Answer : reflection
Description : What is the major factor that makes coaxial cable less susceptible to noisethan twisted-pair cable? A) inner conductor B) diameterof cable C) outer conductor D) insulating material
Last Answer : outer conductor
Description : PIM-SM is usedin a _______multicastenvironment such asa WAN. A) dense B) sparse C) a or b D) none of the above
Last Answer : sparse
Description : S/NET is another kind of ………….network with an ………….for switching. A. fiber optic, active star B. active star , fiber optic C. twisted cable, active network D. active network, twisted cable
Last Answer : A. fiber optic, active star
Description : Optical fiber uses reflection to guide light through a channel, in which angle of incidence is ................. the critical angle. (A) equal to (B) less than (C) greater than (D) less than or equal to
Last Answer : (C) greater than
Description : Fiber optics posses following properties __________ a) Immune electromagnetic interference b) Very less signal attenuation c) Very hard to tap d) All of the mentioned
Last Answer : d) All of the mentioned