The network layer in the Internet isdesigned as a __________network. A) virtual-circuit B) datagram C) circuit-switched D) none of the above

The network layer in the Internet isdesigned as a __________network.
A)
virtual-circuit
B)
datagram
C)
circuit-switched
D)
none of the above
by

1 Answer

Answer :

datagram
by

Related questions

The network layer in the Internet is designed as anetwork. a. datagram b. none c. virtual-circuit d. circuit-switched

Description : The network layer in the Internet is designed as anetwork. a. datagram b. none c. virtual-circuit d. circuit-switched

Last Answer : a. datagram

In a ________ network, twotypes of addressing are involved: global and local. A) virtual-circuit B) datagram C) circuit-switched D) none of the above

Description : In a ________ network, twotypes of addressing are involved: global and local. A) virtual-circuit B) datagram C) circuit-switched D) none of the above

Last Answer : virtual-circuit

A switched WAN is normally implemented as a _______ network. A) virtual-circuitB) datagram C) circuit-switched D) none of the above

Description : A switched WAN is normally implemented as a _______ network. A) virtual-circuit B) datagram C) circuit-switched D) none of the above

Last Answer : virtual-circuit

A _________ network is across between a circuit-switchednetworkand a datagram network. It has some characteristics ofboth. A) virtual-circuit B) packet-switched C) frame-switched D) none of the above

Description : A _________ network is across between a circuit-switchednetworkand a datagram network. It has some characteristics ofboth. A) virtual-circuit B) packet-switched C) frame-switched D) none of the above

Last Answer : virtual-circui

A network is a cross between a circuit-switched network and a datagram network. It has some characteristics of both. a. virtual-circuit b. packet-switchedc. None of the Given d. frame-switched

Description : A network is a cross between a circuit-switched network and a datagram network. It has some characteristics of both. a. virtual-circuit b. packet-switched c. None of the Given d. frame-switched

Last Answer : a. virtual-circuit

Packet-switched networks can alsobe divided into ______subcategories: virtual-circuit networks and datagram networks A) four B) threeC)twoD)five

Description : Packet-switched networks can alsobe divided into ______subcategories: virtual-circuit networks and datagram networks A) four B) three C) two D) five

Last Answer : two

In ATM,_____ is for conventionalpacket switching(virtual-circuit approachor datagram approach). A) AAL1 B) AAL2 C) AAL3/4 D) AAL5

Description : In ATM,_____ is for conventionalpacket switching(virtual-circuit approachor datagram approach). A) AAL1 B) AAL2 C) AAL3/4 D) AAL5

Last Answer : AAL3/4

Differentiate switched virtual circuit and Permanent virtual circuit.

Description : Differentiate switched virtual circuit and Permanent virtual circuit.

Last Answer : Switched virtual circuit format is comparable conceptually to dial-up line in circuit switching. In this method, a virtual circuit is created whenever it is needed and exits only for the duration of ... provided between two uses on a continuous basis. The circuit is dedicated to the specific uses.

Which of the following is NOT true about User Datagram Protocol in transport layer?a. Works well in unidirectional communication, suitable for broadcast information. b. It does three way handshake before sending datagrams c. It provides datagrams, suitable for modeling other protocols such as in IP tunneling or Remote Procedure Call and the Network File System d. The lack of retransmission delays makes it suitable for real-time applications

Description : Which of the following is NOT true about User Datagram Protocol in transport layer? a. Works well in unidirectional communication, suitable for broadcast information. b. It does three way ... File System d. The lack of retransmission delays makes it suitable for real-time applications

Last Answer : b. It does three way handshake before sending datagrams

The protocol data unit (PDU) for the application layer in the Internet stack is?a. Datagram b. Frame c. Message d. Segment

Description : The protocol data unit (PDU) for the application layer in the Internet stack is? a. Datagram b. Frame c. Message d. Segment

Last Answer : c. Message

The protocol data unit PDU for the Transport layer in the Internet stack is A. Segment B. Datagram C. Message/Data D. Frame

Description : The protocol data unit PDU for the Transport layer in the Internet stack is A. Segment B. Datagram C. Message/Data D. Frame

Last Answer : A. Segment

The protocol data unit(PDU) for the application layer in the Internet stack is (A) Segment (B) Datagram (C) Message/Data (D) Frame

Description : The protocol data unit(PDU) for the application layer in the Internet stack is (A) Segment (B) Datagram (C) Message/Data (D) Frame

Last Answer : (C) Message/Data

State weather the following statement is true or false for Internetwork layer. 1).Other internetwork-layer protocols are IP, ICMP, IGMP, ARP, and RARP. 2). Internet Protocol (IP) is the least important protocol in this layer 3). The internetwork layer, also called the internet layer or the network layer, provides the “virtual network” A. 1. True, 2. true, 3. true B. 1. true, 2. false, 3.true C. 1. false, 2. false, 3. false D. 1. true, 2. true, 3. false

Description : State weather the following statement is true or false for Internetwork layer. 1).Other internetwork-layer protocols are IP, ICMP, IGMP, ARP, and RARP. 2). Internet Protocol (IP) is the least important protocol in this layer ... 3.true C. 1. false, 2. false, 3. false D. 1. true, 2. true, 3. false

Last Answer : B. 1. true, 2. false, 3.true

A local telephone network isan example of a_______ network. A) packet-switched B) circuit-switched C) message-switched D) none of the above

Description : A local telephone network isan example of a_______ network. A) packet-switched B) circuit-switched C) message-switched D) none of the above

Last Answer : circuit-switched

BSNL land line telephone network is an example of a network. A. Packet switched B. Circuit switched C. Bit switched D. Line switched

Description : BSNL land line telephone network is an example of a network. A. Packet switched B. Circuit switched C. Bit switched D. Line switched

Last Answer : B. Circuit switched

A local telephone network is an example of a _______ network. a) Packet switched b) Circuit switched c) Bit switched d) Line switched

Description : A local telephone network is an example of a _______ network. a) Packet switched b) Circuit switched c) Bit switched d) Line switched

Last Answer : b) Circuit switched

A local telephone network is an example of a network. a. Packet switched b. Circuit switched c. Bit switched d. Line switched

Description : A local telephone network is an example of a network. a. Packet switched b. Circuit switched c. Bit switched d. Line switched

Last Answer : b. Circuit switched

_____ is used for transmission of packets in the cellular switched architecture. a) Packet switching techniques b) Circuit switching techniques c) Packet and circuit switched technique d) Datagram technique

Description : _____ is used for transmission of packets in the cellular switched architecture. a) Packet switching techniques b) Circuit switching techniques c) Packet and circuit switched technique d) Datagram technique

Last Answer : a) Packet switching techniques

The ________is a three layer network protocol that contains addressing information and some control information that enables packets to be routed: a) User Datagram Protocol b) Internet Protocol c) Dynamic Host Configuration Protocol d) None of These

Description : The ________is a three layer network protocol that contains addressing information and some control information that enables packets to be routed: a) User Datagram Protocol b) Internet Protocol c) Dynamic Host Configuration Protocol d) None of These

Last Answer : b) Internet Protocol

Which of the following is anecessary part of the IPv6 datagram? A) Base header B) Extension header C) Data packet from the upper layer D) (a) and (c)

Description : Which of the following is anecessary part of the IPv6 datagram? A) Base header B) Extension header C) Data packet from the upper layer D) (a) and (c)

Last Answer : Base header

The data unit in the TCP/IP layer called a ..... A) Message B) Segment C) Datagram D) Frame

Description : The data unit in the TCP/IP layer called a ..... A) Message B) Segment C) Datagram D) Frame

Last Answer : D) Frame

User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received in the same order as sent order d. it sends data very quickly

Description : User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received in the same order as sent order d. it sends data very quickly

Last Answer : a. all UDP packets are treated independently by transport layer

User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received in the same order as sent order d. it sends data very quickly Answer: Option(a) 4. Transmission control protocol ____

Description : User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received ... order d. it sends data very quickly Answer: Option(a) 4. Transmission control protocol ____

Last Answer : a. all UDP packets are treated independently by transport layer

User datagram protocol is called connectionless because _____________ A. all UDP packets are treated independently by transport layer B. it sends data as a stream of related packets C. it is received in the same order as sent order D. it sends data very quickly

Description : User datagram protocol is called connectionless because _____________ A. all UDP packets are treated independently by transport layer B. it sends data as a stream of related packets C. it is received in the same order as sent order D. it sends data very quickly

Last Answer : A. all UDP packets are treated independently by transport layer

User datagram protocol is called connectionless because _____________ a) all UDP packets are treated independently by transport layer b) it sends data as a stream of related packets c) it is received in the same order as sent order d) it sends data very quickly

Description : User datagram protocol is called connectionless because _____________ a) all UDP packets are treated independently by transport layer b) it sends data as a stream of related packets c) it is received in the same order as sent order d) it sends data very quickly

Last Answer : all UDP packets are treated independently by transport layer

Which of the following is an application layer service? A) Network virtual terminal B) File transfer, access and management C) Mail service D) All of the above

Description : Which of the following is an application layer service? A) Network virtual terminal B) File transfer, access and management C) Mail service D) All of the above

Last Answer : C) Mail service

A switchin a datagram network uses arouting tablethat is based on the ______address. A) source B) destination C) local D) none of the above

Description : A switchin a datagram network uses arouting tablethat is based on the ______address. A) source B) destination C) local D) none of the above

Last Answer : destination

In IPv6, when a datagram needs tobediscarded ina congested network, the decision is basedon the _______ field in thebase header. A) hop limit B) priority C) nextheader D) noneof the above

Description : In IPv6, when a datagram needs tobediscarded ina congested network, the decision is basedon the _______ field in thebase header. A) hop limit B) priority C) nextheader D) noneof the above

Last Answer : priority

The sender is a router thathas receiveda datagram destinedfor a host on thesame network. The logical address that mustbe mapped to a physical address is ______. A) thedestination IP address in the datagram header B) the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Description : The sender is a router thathas receiveda datagram destinedfor a host on thesame network. The logical address that mustbe mapped to a physical address is ______. A) thedestination IP address in the datagram ... IP address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : thedestination IP address in the datagram header

If the sender is a host and wants tosend a packet toanotherhost on another network, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram header B) the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Description : If the sender is a host and wants tosend a packet toanotherhost on another network, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram ... the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : the IP address of therouter found inthe routing table

Which of the following technique isused for encapsulation? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets. B. a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame. C. One of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Description : Which of the following technique isused for encapsulation? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets. B. a technique used by protocols in which a lower level ... network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Last Answer : a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame

Which of the following technique isused for fragment? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets B. a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame C. one of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Description : Which of the following technique isused for fragment? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets B. a technique used by protocols in which a lower level protocol ... network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Last Answer : one of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size

The number of network segments on which the datagram is allowed to travel before a router should discard it is called _______. A. Time to Live (TTL) B. Time to Die(TTD) C. self recognition D. both a and b

Description : The number of network segments on which the datagram is allowed to travel before a router should discard it is called _______. A. Time to Live (TTL) B. Time to Die(TTD) C. self recognition D. both a and b

Last Answer : A. Time to Live (TTL)

In _______ there are no setup or teardown phases. A) datagram switching B) circuit switching C) frame switching D) none of the above

Description : In _______ there are no setup or teardown phases. A) datagram switching B) circuit switching C) frame switching D) none of the above

Last Answer : datagram switching

In __________, eachpacket is treatedindependentlyof all others. A) datagram switching B) circuit switching C) frame switching D) none of the above

Description : In __________, eachpacket is treatedindependentlyof all others. A) datagram switching B) circuit switching C) frame switching D) none of the above

Last Answer : datagram switching

In _________, resources areallocatedon demand. A) datagram switching B) circuit switching C) frame switching D) none of the above

Description : In _________, resources areallocatedon demand. A) datagram switching B) circuit switching C) frame switching D) none of the above

Last Answer : datagram switching

In _________, thereis no resource allocation for a packet. A) datagram switching B) circuit switching C) frame switching D) none of the above

Description : In _________, thereis no resource allocation for a packet. A) datagram switching B) circuit switching C) frame switching D) none of the above

Last Answer : datagram switching

In _______, the resources need to bereserved during the setup phase; the resources remain dedicated for the entire durationof data transfer phase until the teardownphase. A) datagram switching B) circuit switching C) frame switching D) none of the above

Description : In _______, the resources need to bereserved during the setup phase; the resources remain dedicated for the entire durationof data transfer phase until the teardownphase. A) datagram switching B) circuit switching C) frame switching D) none of the above

Last Answer : circuit switching

A network that needs human beings to manually route signals is called.... A) Fiber Optic Network B) Bus Network C) T-switched network D) Ring network

Description : A network that needs human beings to manually route signals is called.... A) Fiber Optic Network B) Bus Network C) T-switched network D) Ring network

Last Answer : C) T-switched network

________ is a virtual-circuit wide-area network that was designed in response to demands fora new type of WAN in thelate1980s and early 1990s. A) X.25 B) Frame Relay C) ATM D) none of the above

Description : ________ is a virtual-circuit wide-area network that was designed in response to demands fora new type of WAN in thelate1980s and early 1990s. A) X.25 B) Frame Relay C) ATM D) none of the above

Last Answer : Frame Relay

In virtual circuit network each packet contains ___________ a. full source and destination address b. a short VC number c. only source address d. only destination address

Description : In virtual circuit network each packet contains ___________ a. full source and destination address b. a short VC number c. only source address d. only destination address

Last Answer : b. a short VC number

In virtual circuit network each packet contains ___________ A. full source and destination address B. a short VC number C. only source address D. only destination address

Description : In virtual circuit network each packet contains ___________ A. full source and destination address B. a short VC number C. only source address D. only destination address

Last Answer : B. a short VC number

For which one of the following reasons does Internet Protocol (IP) use the time-to- live (TTL) field in the IP datagram header? a. Ensure packets reach destination within that time b. Discard packets that reach later than that time c. Prevent packets from looping indefinitely d. Limit the time for which a packet gets queued in intermediate routers.

Description : For which one of the following reasons does Internet Protocol (IP) use the time-to- live (TTL) field in the IP datagram header? a. Ensure packets reach destination within that time b. ... packets from looping indefinitely d. Limit the time for which a packet gets queued in intermediate routers.

Last Answer : c. Prevent packets from looping indefinitely

A ________network is made of a set of switches connected by physical links, in which each link is divided into nchannels. A) line-switched B) frame-switched C) circuit-switched D) none of the above

Description : A ________network is made of a set of switches connected by physical links, in which each link is divided into nchannels. A) line-switched B) frame-switched C) circuit-switched D) none of the above

Last Answer : circuit-switched

Satellite-Switched Time-Division Multiple Access (SS/TDMA) is A. the method of determining whichdevice has access tothe transmission medium at any time. B. a medium access control technique for multiple access transmission media C. a form of TDMA in which circuit switching is used to dynamically changethechannel assignments D. All of theabove E. None of the above

Description : Satellite-Switched Time-Division Multiple Access (SS/TDMA) is A. the method of determining whichdevice has access tothe transmission medium at any time. B. a medium access control technique for ... switching is used to dynamically changethechannel assignments D. All of theabove E. None of the above

Last Answer : a form of TDMA in which circuit switching is used to dynamically changethechannel assignments

The required resources for communication between end systems are reserved for theduration of the session between end systems in method. a. Packet switched b. Bit switched c. Line switched d. Circuit switched

Description : The required resources for communication between end systems are reserved for theduration of the session between end systems in method. a. Packet switched b. Bit switched c. Line switched d. Circuit switched

Last Answer : d. Circuit switched

Circuit switching takes place at the________ layer. A) data line B) physical C) network D) transport

Description : Circuit switching takes place at the________ layer. A) data line B) physical C) network D) transport

Last Answer : physical

TELNET, FTP, SMTP, Protocols fall in the following layer of OSI reference model? a. Transport layer b. Internet layer c. Network layer d. Application layer

Description : TELNET, FTP, SMTP, Protocols fall in the following layer of OSI reference model? a. Transport layer b. Internet layer c. Network layer d. Application layer

Last Answer : d. Application layer

What are the common protocols associated with the network layer? a. Address Resolution Protocol b. Reverse Address Resolution Protocol c. Internet protocol d. Neighbour Discovery Protocol

Description : What are the common protocols associated with the network layer? a. Address Resolution Protocol b. Reverse Address Resolution Protocol c. Internet protocol d. Neighbour Discovery Protocol

Last Answer : c. Internet protocol

What layer in the TCP/IP stack is equivalent to the Transport layer of the OSI model? a. Internet b. Host to host c. Network Access d. Application

Description : What layer in the TCP/IP stack is equivalent to the Transport layer of the OSI model? a. Internet b. Host to host c. Network Access d. Application

Last Answer : b. Host to host