The United States is dividedinto many _______.
A)
LECs
B)
LATAs
C)
IXCs
D)
none of the above

1 Answer

Answer :

LATAs

Related questions

Description : LATAs are connected by a company called _________ a) Land exchange carrier b) Local exchange carrier c) Local control exchange d) Land area exchange

Last Answer : b) Local exchange carrier

Description : the _______ agreement ended many trade barriers among the united states, mexico, and canada? -General Knowledge

Last Answer : The North American Free Trade Agreement ended many trade barriers among the United States, Mexico, and Canada.

Description : In the 1800s, the United States had a foreign policy of _______.?

Last Answer : Isolation

Description : The Adams-Onís Treaty allowed the United States to purchase Florida from _______.?

Last Answer : Puerto Rico

Description : At the end of the Revolutionary War, the United States was bound on the north by _______.?

Last Answer : Canada (A+)

Description : When Queen Liliuokalani's rule was overthrown, _______ asked to be annexed as a United States territory.?

Last Answer : Hawaii

Description : The United States and the Soviet Union came very close to nuclear war during the _______.?

Last Answer : cuban missile crisis

Description : The United States and the Soviet Union came very close to nuclear war during the _______.?

Last Answer : cuban missile crisis

Description : Bill Clinton was _______ President of United States: (a) 42nd (b) 33rd (c) 51st

Last Answer : a) 42nd

Description : Bluetooth is a _______ technology that connects devices (called gadgets) ina small area. A) wired LAN B) wirelessLAN C) VLAN D) none of the above

Last Answer : wirelessLAN

Description : In IEEE 802.11, when a frame is coming from an AP and going to astation, the address flag is _______. A) 00 B) 01 C) 10 D) 11

Last Answer : 01

Description : In IEEE 802.11, _______ isan optionalaccess method that can be implemented inan infrastructure network (not in an ad hocnetwork). A) DCF B) PCF C) either (a) or (b) D) neither (a) nor (b)

Last Answer : PCF

Description : IEEE hasdefined the specifications fora wireless LAN, called _______, whichcovers the physical and data link layers. A) IEEE 802.3 B) IEEE 802.5 C) IEEE 802.11 D) IEEE 802.2

Last Answer : IEEE 802.11

Description : In the _______ method, each station has a predecessorand a successor. A) reservation B) polling C) token passing D) none of the above

Last Answer : token passing

Description : In the _______ method, thestations in a network areorganizedin a logical ring. A) reservation B) polling C) token passing D) none of the above

Last Answer : token passing

Description : In the _______ method, the primary device controls the link; thesecondary devices follow its instructions. A) reservation B) polling C) token passing D) none of the above

Last Answer : polling

Description : In _______ methods,a stationcannot send unless it hasbeen authorized byother stations. A) random access B) controlledaccess C) channelization D) none of the above

Last Answer : controlledaccess

Description : In _______ methods, the stations consult one another tofind which station has the right to send. A) random access B) controlledaccess C) channelization D) none of the above

Last Answer : controlledaccess

Description : We have categorizedaccess methods into _______ groups. A) two B) three C) four D) five

Last Answer : three

Description : Gigabit Ethernet access methods include _______ mode. A) half-duplex B) full-duplex C) both (a) and (b) D) neither (a) nor (b)

Last Answer : both (a) and (b)

Description : Each station on an Ethernet network has a unique _______ address imprinted onits network interface card (NIC). A) 5-byte B) 32-bit C) 48-bit D) none of the above

Last Answer : 48-b

Description : The _______ layer of Ethernet consistsof the LLC sublayer and the MAC sublayer. A) data link B) physical C) network D) none of the above

Last Answer : data link

Description : A _______ can check the MAC addresses contained inthe frame. A) passive hub B) repeater C) bridge D) route

Last Answer : bridge

Description : A _______ is a device that operates only in the physical layer A) passive hub B) repeater C) bridge D) router

Last Answer : repeater

Description : _______ ispart of the media; its location in the Internet model is below thephysical layer. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Last Answer : A passivehub

Description : In astar-topology Ethernet LAN, _______ is just a point where the signals coming from different stations collide; it is thecollision point. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Last Answer : A passivehub

Description : A _______ is a connecting devicethat operates in the physical and data link layers of theInternet model. A) repeater B) bridge C) router D) none of the above

Last Answer : bridge

Description : A repeater is a connecting devicethat operates in the _______ layer of theInternet model. A) physical B) data link C) network D) all of theabove

Last Answer : physical

Description : _______ inthe data link layer separates a message from one source toa destination, or from other messages going from other sources to other destinations. A) Digitizing B) Controlling C) Framing D) none of the above

Last Answer : Framing

Description : HDLC isan acronym for _______. A) High-duplex line communication B) High-leveldata link control C) Half-duplex digital link combination D) Hostdouble-level circuit

Last Answer : High-leveldata link control

Description : For Stop-and-Wait ARQ, for 10 data packets sent, _______ acknowledgments are needed. A) exactly 10 B) less than10 C) more than 10 D) none of the above

Last Answer : exactly 10

Description : ARQ stands for _______. A) Automatic repeatquantization B) Automatic repeat request C) Automatic retransmissionrequest D) Acknowledge repeat request

Last Answer : Automatic repeat request

Description : In Go-Back-N ARQ, if frames 4,5, and 6 are received successfully, thereceiver may send an ACK _______ to thesender. A) 5 B) 6 C) 7 D) any of theabove

Last Answer : 7

Description : _______ control refers to aset of proceduresused torestrict the amount ofdata that the sender can send before waiting foracknowledgment. A) Flow B) Error C) Transmission D) none of the above

Last Answer : Flow

Description : High-level Data Link Control (HDLC) is a _______ protocol for communication over point-to-pointand multipoint links. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above

Last Answer : bit-oriented

Description : The _______ of a polynomial is the highest power in the polynomial. A) range B) degree C) power D) none of the above

Last Answer : degree

Description : In block coding, if k =2 and n =3, we have _______ invalid codewords. A) 8 B) 4 C) 2 D) none of the above

Last Answer : 2

Description : To guarantee the detectionof up to 5errors in all cases, the minimum Hamming distance in a block code mustbe _______. A) 5 B) 6 C) 11 D) none of the above

Last Answer : 6

Description : The HFC network uses _______ cable. A) twisted-pair B) coaxial C) fiber-optic D) acombination of (b) and (c)

Last Answer : fiber-optic

Description : The term modem is a composite word that refers to the two functional entities that make up the device: asignal _______ and a signal _______. A) modulator; demodulator B) demodulator; modulator C) modern;demo D) none of the above

Last Answer : modulator; demodulator

Description : The carrier that handles inter-LATA services is calleda(n) _______. A) POP B) IXC C) LEC D) none of the above

Last Answer : IXC

Description : Thestandard for datatransmission over an HFC network is called _______. A) MCNS B) DOCSIS C) CMTS D) ADSL

Last Answer : DOCSIS

Description : Inan HFC network, the upstream data are modulated using the _______ modulation technique. A) QAM B) QPSK C) PCM D) ASK

Last Answer : QPSK

Description : Inan HFC network, the downstream data are modulated using the _______ modulation technique. A) PSK B) QAM C) PCM D) ASK

Last Answer : QAM

Description : Another name for the cable TV office is the _______. A) splitter B) fiber node C) combiner D) head end

Last Answer : head end

Description : HDSL encodes datausing _______. A) 4B/5B B) 2B1Q C) 1B2Q D) 6B/8T

Last Answer : 2B1Q

Description : _______ was designed as an alternative to the T-1 line. A) VDSL B) ADSL C) SDSL D) HDSL

Last Answer : HDSL

Description : DMT is a modulation technique that combineselements of _______ and _______. A) FDM; TDM B) QDM; QAM C) FDM; QAM D) PSK; FSK

Last Answer : FDM; QAM

Description : _______ is suitable for businesses that require comparable upstream and downstream data rates. A) VDSL B) ADSL C) SDSL D) (a) and (b)

Last Answer : SDSL

Description : Data from a computer are_______; the local loop handles _______ signals. A) analog; analog B) analog; digital C) digital; digital D) digital; analog

Last Answer : digital; analog