The _______ of a polynomial is the highest power in the polynomial.
A)
range
B)
degree
C)
power
D)
none of the above

1 Answer

Answer :

degree

Related questions

Description : _______ can detect burst error of length less than or equal to degree of the polynomial and detects burst errors that affect odd number of bits. a. Hamming Code b. CRC c. VRC d. None of the above

Last Answer : b. CRC

Description : How do you get the highest degree of polynomial?

Last Answer : x2 - x10 + x5 - x12 - x3

Description : If the frame to be transmitted is 1101011011 and the CRC polynomial to be used for generating checksum is x 4+ x + 1, then what is the transmitted frame? a. 11010110111011 b. 11010110111101 c. 11010110111110 d. 11010110111001

Last Answer : c. 11010110111110

Description : The message 11001001 is to be transmitted using the CRC polynomial x^3 + 1 to protect it from errors. The message that should be transmitted is: a. 11001001000 b. 11001001011 c. 11001010 d. 110010010011

Last Answer : b. 11001001011

Description : Let G(x) be the generator polynomial used for CRC checking. What is the condition that should be satisfied by G(x) to detect odd number of bits in error? a. G(x) contains more than two terms b. G(x) does ... exceeding the frame length c. 1+x is a factor of G(x) d. G(x) has an odd number of terms

Last Answer : c. 1+x is a factor of G(x)

Description : Find the transmitted code if the frame is (MSB) 1101011011 (LSB) and generator polynomial is x4 + x + 1. A. 1101011011 1110 B. 1101011111 1110 C. 1101011011 1111 D. 1101011011

Last Answer : A. 1101011011 1110

Description : Degree of the polynomial 4x4 + Ox3 + Ox5 + 5x+ 7 is -Maths 9th

Last Answer : (a) Degree of 4x4 + Ox3 + Ox5 + 5x + 7 is equal to the highest power of variable x. Here, the highest power of x is 4, Hence, the degree of a polynomial is 4.

Description : Degree of the zero polynomial is -Maths 9th

Last Answer : (d) The degree of zero polynomial is not defined, because in zero polynomial, the coefficient of any variable is zero i.e., Ox2 or Ox5,etc. Hence, we cannot exactly determine the degree of variable.

Description : Degree of the polynomial 4x4 + Ox3 + Ox5 + 5x+ 7 is -Maths 9th

Last Answer : (a) Degree of 4x4 + Ox3 + Ox5 + 5x + 7 is equal to the highest power of variable x. Here, the highest power of x is 4, Hence, the degree of a polynomial is 4.

Description : Degree of the zero polynomial is -Maths 9th

Last Answer : (d) The degree of zero polynomial is not defined, because in zero polynomial, the coefficient of any variable is zero i.e., Ox2 or Ox5,etc. Hence, we cannot exactly determine the degree of variable.

Description : write the degree of the polynomial p(x)=4 -Maths 9th

Last Answer : f(x)=4 =4*x0 So degree =0

Description : Degree of a Polynomial : -Maths 9th

Last Answer : answer:

Description : Find the polynomial of least degree which should be subtracted from the polynomial x4 + 2x3 – 4x2 + 6x – 3 so that it is exactly divisible by x2 – x + 1. -Maths 10th

Last Answer : Here, p(x) = x4 + 2x3 - 4x2 + 6x - 3, g(x) = x2 - x +1 On dividing p(x) by g(x) Therefore (x-1) must be subtracted from the polynomial p(x) to make it divisible by g(x).

Description : What is the degree of f The table shows ordered pairs for a polynomial function, fх f(x)-3 63--2 8-1 - 10 01 -12 83 63?

Last Answer : The table shows ordered pairs for a polynomial function, fх f(x)-3 63--2 8-1 - 10 01 -12 83 63What is the degree of f?

Description : How many unique roots will a third degree polynomial function have?

Last Answer : It can have 1, 2 or 3 unique roots.

Description : The maximum number of zeroes that a polynomial of degree 4 can have is (a) One (b) Two (c) Three (d) Four

Last Answer : (d) Four

Description : The degree of the polynomial, x 4 – x 2 +2 is (a) 2 (b) 4 (c) 1 (d) 0

Last Answer : (b) 4

Description : Indecodinga digital signal, the receiver calculates a running average of thereceived signal power, called the _______. A) baseline B) base C) line D) none of the above

Last Answer : baseline

Description : In a Go-Back-N ARQ, if the window size is 63,what is the range of sequence numbers? A) 0to 63 B) 0to 64 C) 1to 63 D) 1to 64

Last Answer : 0to 63

Description : In modulo-11 arithmetic, we use only the integers inthe range ______, inclusive. A) 1to 10 B) 1to 11 C) 0to 10 D) none of the above

Last Answer : 0to 10

Description : ________ are usedfor short-range communications such as those between a PC and aperipheral device. A) Radio waves B) Microwaves C) Infrared waves D) none of the above

Last Answer : Infrared waves

Description : _____ signals can have an infinite number of values ina range. A) Analog B) Digital C) (a) or (b) D) None of the above

Last Answer : Analog

Description : In classless addressing, the ______isanother name for thecommon part of the address range. A) suffix B) prefix C) netid D) none of the above

Last Answer : prefix

Description : The basic unit ofa worksheet into which you enter data in Excel is called a– (A) tab (B) cell (C) box (D) range (E) None of these

Last Answer : cell

Description : What frequency range is used for FM radio transmission? A. Very Low Frequency : 3 kHz to 30. kHz B. Low Frequency :30 kHz to 300 kHz C. High Frequency :3 MHz to 30 MHz D. Very High Frequency : 30 MHz to 300 MHz E. None of the above

Last Answer : Very High Frequency : 30 MHz to 300 MHz

Description : Consider the given network implementation scenario. For the given classful NID 199.10.20.0/24, the requirement is to create 13 subnets. With given details, find the range of first and last valid IP in 15th subnet. a. ... .20.225 to 199.10.20.238 c. 199.10.20.193 to 199.10.20.206 d. Not of these

Last Answer : a. A Only

Description : The range of sequence number which is the concern of the receiver is called the receive sliding window. A. receive sliding window. B. sliding window C. frame buffer D. both a and b

Last Answer : A. receive sliding window.

Description : In a Go-Back-N ARQ, if the window size is 63, what is the range of sequence numbers? A. 0 to 63 B. 0 to 64 C. 1 to 63 D. 1 to 64

Last Answer : A. 0 to 63

Description : …….are used for short-range communications such as those between a PC and aperipheral device. a. Radio waves b. None of These c. Microwaves d. Infrared waves

Last Answer : d. Infrared waves

Description : Bluetooth is a _______ technology that connects devices (called gadgets) ina small area. A) wired LAN B) wirelessLAN C) VLAN D) none of the above

Last Answer : wirelessLAN

Description : In IEEE 802.11, when a frame is coming from an AP and going to astation, the address flag is _______. A) 00 B) 01 C) 10 D) 11

Last Answer : 01

Description : In IEEE 802.11, _______ isan optionalaccess method that can be implemented inan infrastructure network (not in an ad hocnetwork). A) DCF B) PCF C) either (a) or (b) D) neither (a) nor (b)

Last Answer : PCF

Description : IEEE hasdefined the specifications fora wireless LAN, called _______, whichcovers the physical and data link layers. A) IEEE 802.3 B) IEEE 802.5 C) IEEE 802.11 D) IEEE 802.2

Last Answer : IEEE 802.11

Description : In the _______ method, each station has a predecessorand a successor. A) reservation B) polling C) token passing D) none of the above

Last Answer : token passing

Description : In the _______ method, thestations in a network areorganizedin a logical ring. A) reservation B) polling C) token passing D) none of the above

Last Answer : token passing

Description : In the _______ method, the primary device controls the link; thesecondary devices follow its instructions. A) reservation B) polling C) token passing D) none of the above

Last Answer : polling

Description : In _______ methods,a stationcannot send unless it hasbeen authorized byother stations. A) random access B) controlledaccess C) channelization D) none of the above

Last Answer : controlledaccess

Description : In _______ methods, the stations consult one another tofind which station has the right to send. A) random access B) controlledaccess C) channelization D) none of the above

Last Answer : controlledaccess

Description : We have categorizedaccess methods into _______ groups. A) two B) three C) four D) five

Last Answer : three

Description : Gigabit Ethernet access methods include _______ mode. A) half-duplex B) full-duplex C) both (a) and (b) D) neither (a) nor (b)

Last Answer : both (a) and (b)

Description : Each station on an Ethernet network has a unique _______ address imprinted onits network interface card (NIC). A) 5-byte B) 32-bit C) 48-bit D) none of the above

Last Answer : 48-b

Description : The _______ layer of Ethernet consistsof the LLC sublayer and the MAC sublayer. A) data link B) physical C) network D) none of the above

Last Answer : data link

Description : A _______ can check the MAC addresses contained inthe frame. A) passive hub B) repeater C) bridge D) route

Last Answer : bridge

Description : A _______ is a device that operates only in the physical layer A) passive hub B) repeater C) bridge D) router

Last Answer : repeater

Description : _______ ispart of the media; its location in the Internet model is below thephysical layer. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Last Answer : A passivehub

Description : In astar-topology Ethernet LAN, _______ is just a point where the signals coming from different stations collide; it is thecollision point. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Last Answer : A passivehub

Description : A _______ is a connecting devicethat operates in the physical and data link layers of theInternet model. A) repeater B) bridge C) router D) none of the above

Last Answer : bridge

Description : A repeater is a connecting devicethat operates in the _______ layer of theInternet model. A) physical B) data link C) network D) all of theabove

Last Answer : physical

Description : _______ inthe data link layer separates a message from one source toa destination, or from other messages going from other sources to other destinations. A) Digitizing B) Controlling C) Framing D) none of the above

Last Answer : Framing

Description : HDLC isan acronym for _______. A) High-duplex line communication B) High-leveldata link control C) Half-duplex digital link combination D) Hostdouble-level circuit

Last Answer : High-leveldata link control