Find the transmitted code if the frame is (MSB) 1101011011 (LSB) and generator polynomial is x4 + x + 1.A. 1101011011 1110 B. 1101011111 1110 C. 1101011011 1111 D. 1101011011

Find the transmitted code if the frame is (MSB) 1101011011 (LSB) and generator polynomial
is x4 + x + 1.
A. 1101011011 1110
B. 1101011111 1110
C. 1101011011 1111
D. 1101011011
by

1 Answer

Answer :

A. 1101011011 1110
by

Related questions

If the frame to be transmitted is 1101011011 and the CRC polynomial to be used for generating checksum is x 4+ x + 1, then what is the transmitted frame? a. 11010110111011 b. 11010110111101 c. 11010110111110 d. 11010110111001

Description : If the frame to be transmitted is 1101011011 and the CRC polynomial to be used for generating checksum is x 4+ x + 1, then what is the transmitted frame? a. 11010110111011 b. 11010110111101 c. 11010110111110 d. 11010110111001

Last Answer : c. 11010110111110

The checksum of0000 and0000 is__________. A) 1111 B) 0000 C) 1110 D) 0111

Description : The checksum of0000 and0000 is__________. A) 1111 B) 0000 C) 1110 D) 0111

Last Answer : 0111

The checksum of1111 and1111 is_________. A) 1111 B) 0000 C) 1110 D) 0111

Description : The checksum of1111 and1111 is_________. A) 1111 B) 0000 C) 1110 D) 0111

Last Answer : 1110

: LSB and MSB In full What ?

Description : of LSB and MSB In full What ?

Last Answer : LSB = Least Significant Bit MSB = Most Significant Bit

What is MSB and LSB?

Description : What is MSB and LSB?

Last Answer : LSB is least significant bit and MSB is most significant bit.  Suppose this binary number 1000 here rightmost 0 is the LSB and left most 1 is the MSB.

Let G(x) be the generator polynomial used for CRC checking. What is the condition that should be satisfied by G(x) to detect odd number of bits in error? a. G(x) contains more than two terms b. G(x) does not divide 1+x^k, for any k not exceeding the frame length c. 1+x is a factor of G(x) d. G(x) has an odd number of terms

Description : Let G(x) be the generator polynomial used for CRC checking. What is the condition that should be satisfied by G(x) to detect odd number of bits in error? a. G(x) contains more than two terms b. G(x) does ... exceeding the frame length c. 1+x is a factor of G(x) d. G(x) has an odd number of terms

Last Answer : c. 1+x is a factor of G(x)

Convert the decimal number 14.875 to binary. 87) A) 1110.0111 B) 1110.1110 C) 1111.1011 D) 1100.1100

Description : Convert the decimal number 14.875 to binary. 87) A) 1110.0111 B) 1110.1110 C) 1111.1011 D) 1100.1100

Last Answer : B) 1110.1110

The message 11001001 is to be transmitted using the CRC polynomial x^3 + 1 to protect it from errors. The message that should be transmitted is: a. 11001001000 b. 11001001011 c. 11001010 d. 110010010011

Description : The message 11001001 is to be transmitted using the CRC polynomial x^3 + 1 to protect it from errors. The message that should be transmitted is: a. 11001001000 b. 11001001011 c. 11001010 d. 110010010011

Last Answer : b. 11001001011

An error-detectingcode inserted asa field in a blockof data tobe transmitted is known as A. Frame check sequence B. Error detecting code C. Checksum D. flow control E. None of the above

Description : An error-detectingcode inserted asa field in a blockof data tobe transmitted is known as A. Frame check sequence B. Error detecting code C. Checksum D. flow control E. None of the above

Last Answer : Frame check sequence

By actual division, find the quotient and the remainder when the first polynomial is divided by the second polynomial x4 + 1 and x-1. -Maths 9th

Description : By actual division, find the quotient and the remainder when the first polynomial is divided by the second polynomial x4 + 1 and x-1. -Maths 9th

Last Answer : Actual division method

The polynomial p{x = x4 -2x3 + 3x2 -ax+3a-7 when divided by x+1 leaves the remainder 19. -Maths 9th

Description : The polynomial p{x = x4 -2x3 + 3x2 -ax+3a-7 when divided by x+1 leaves the remainder 19. -Maths 9th

Last Answer : p(x) is divided by x+ 2 =

By actual division, find the quotient and the remainder when the first polynomial is divided by the second polynomial x4 + 1 and x-1. -Maths 9th

Description : By actual division, find the quotient and the remainder when the first polynomial is divided by the second polynomial x4 + 1 and x-1. -Maths 9th

Last Answer : Actual division method

The polynomial p{x = x4 -2x3 + 3x2 -ax+3a-7 when divided by x+1 leaves the remainder 19. -Maths 9th

Description : The polynomial p{x = x4 -2x3 + 3x2 -ax+3a-7 when divided by x+1 leaves the remainder 19. -Maths 9th

Last Answer : p(x) is divided by x+ 2 =

Find the polynomial of least degree which should be subtracted from the polynomial x4 + 2x3 – 4x2 + 6x – 3 so that it is exactly divisible by x2 – x + 1. -Maths 10th

Description : Find the polynomial of least degree which should be subtracted from the polynomial x4 + 2x3 – 4x2 + 6x – 3 so that it is exactly divisible by x2 – x + 1. -Maths 10th

Last Answer : Here, p(x) = x4 + 2x3 - 4x2 + 6x - 3, g(x) = x2 - x +1 On dividing p(x) by g(x) Therefore (x-1) must be subtracted from the polynomial p(x) to make it divisible by g(x).

In one's complement arithmetic, if positive 7 is 0111, then negative 7 is ________. A) 1111 B) 1101 C) 1000 D) none of the above

Description : In one's complement arithmetic, if positive 7 is 0111, then negative 7 is ________. A) 1111 B) 1101 C) 1000 D) none of the above

Last Answer : 1101

In SONET, for each frame, the bytes are transmitted __________. A) from left to the right, top to bottom B) from right to theleft, bottom to top C) from left to the right, bottom to top D) from right to the left, top to bottom

Description : In SONET, for each frame, the bytes are transmitted __________. A) from left to the right, top to bottom B) from right to theleft, bottom to top C) from left to the right, bottom to top D) from right to the left, top to bottom

Last Answer : from left to the right, bottom to top

_______ can detect burst error of length less than or equal to degree of the polynomial and detects burst errors that affect odd number of bits. a. Hamming Code b. CRC c. VRC d. None of the above

Description : _______ can detect burst error of length less than or equal to degree of the polynomial and detects burst errors that affect odd number of bits. a. Hamming Code b. CRC c. VRC d. None of the above

Last Answer : b. CRC

Assume that variable x resides at memory location 1234, y at 1111 and p at 2222. Int x=1, y=2, *p; p=&x; y=*p; What will be the value of y after execution of above code? A) 2 B) 1 C) 1234 D) 1111

Description : Assume that variable x resides at memory location 1234, y at 1111 and p at 2222. Int x=1, y=2, *p; p=&x; y=*p; What will be the value of y after execution of above code? A) 2 B) 1 C) 1234 D) 1111

Last Answer : C) 1234

What is the output of the following code AL= -28 decimal, BL=59 decimal IMUL BL AX=? , MSB=? a) AX= F98CH, MSB=1. b) AX= 1652, MSB=1. c) BX F9C8H, MSB=1. d) BX= 1652, MSB=1.

Description : What is the output of the following code AL= -28 decimal, BL=59 decimal IMUL BL AX=? , MSB=? a) AX= F98CH, MSB=1. b) AX= 1652, MSB=1. c) BX F9C8H, MSB=1. d) BX= 1652, MSB=1.

Last Answer : a) AX= F98CH, MSB=1.

Which code the decimal digits are represented by the 8421 BCD code preceded by 1111: a. ASCII b. EBCDIC c. Both d. None of these

Description : Which code the decimal digits are represented by the 8421 BCD code preceded by 1111: a. ASCII b. EBCDIC c. Both d. None of these

Last Answer : b. EBCDIC

The message 11001001 is to be transmitted using the CRC polynomial x3+1 to protect it from errors. The message that should be transmitted is (A) 110010011001 (B) 11001001 (C) 110010011001001 (D) 11001001011

Description : The message 11001001 is to be transmitted using the CRC polynomial x3+1 to protect it from errors. The message that should be transmitted is (A) 110010011001 (B) 11001001 (C) 110010011001001 (D) 11001001011

Last Answer : (D) 11001001011

Let G(x) be generator polynomial used for CRC checking. The condition that should be satisfied by G(x) to correct odd numbered error bits, will be: (1) (1+x) is factor of G(x) (2) (1-x) is factor of G(x) (3) (1+x2) is factor of G(x) (4) x is factor of G(x)

Description : Let G(x) be generator polynomial used for CRC checking. The condition that should be satisfied by G(x) to correct odd numbered error bits, will be: (1) (1+x) is factor of G(x) (2) (1-x) is factor of G(x) (3) (1+x2) is factor of G(x) (4) x is factor of G(x)

Last Answer : (1+x) is factor of G(x)

The _______ of a polynomial is the highest power in the polynomial. A) range B) degree C) power D) none of the above

Description : The _______ of a polynomial is the highest power in the polynomial. A) range B) degree C) power D) none of the above

Last Answer : degree

The divisor in a cyclic code is normally called the _________. A) degree B) generator C) redundancy D) none of the above

Description : The divisor in a cyclic code is normally called the _________. A) degree B) generator C) redundancy D) none of the above

Last Answer : generator

The output of a balanced modulator is ____________. A. LSB and USB B. LSB C. USB D. Carrier

Description : The output of a balanced modulator is ____________. A. LSB and USB B. LSB C. USB D. Carrier

Last Answer : A. LSB and USB

In successive-approximation A/D converter, offset voltage equal to 1/2 LSB is added to the D/A converter’s output. This is done to (A) Improve the speed of operation. (B) Reduce the maximum quantization error. (C) Increase the number of bits at the output. (D) Increase the range of input voltage that can be converted

Description : In successive-approximation A/D converter, offset voltage equal to 1/2 LSB is added to the D/A converter's output. This is done to (A) Improve the speed of operation. (B) Reduce the maximum ... Increase the number of bits at the output. (D) Increase the range of input voltage that can be converted

Last Answer : (B) Reduce the maximum quantization error.

In a 5 bit weighted resistor D/A converters, the resistor value corresponding to LSB is 40 kΩ, and the resistor

Description : In a 5 bit weighted resistor D/A converters, the resistor value corresponding to LSB is 40 kΩ, and the resistor value corresponding to MSB will be (A) 0.4 kΩ (B) 3 kΩ (C) 2.8 kΩ (D) 2.5 kΩ

Last Answer : In a 5 bit weighted resistor D/A converters, the resistor value corresponding to LSB is 40 kΩ, and the resistor value corresponding to MSB will be 2.5 kΩ 

Which are the types of important ideas to notice about these odometer readings: a. The MSB is the sign bit .O for a +sign and 1 for a— sign b. The negative number represent the 2’s complement of the positive number c. Both d. __ Allof these

Description : Which are the types of important ideas to notice about these odometer readings: a. The MSB is the sign bit .O for a +sign and 1 for a— sign b. The negative number represent the 2’s complement of the positive number c. Both d. __ Allof these

Last Answer : c. Both

What are the safeties on MSB?

Description : What are the safeties on MSB?

Last Answer : Circuit breakers, fuses and over current relays are used. The panels are dead front panel, that is, we cannot open the panel for maintenance until we switch off the power to the panel by circuit breaker.

In a weighted-resistor digital-to-analog converter with 8-bit input, if the resistance corresponding to the MSB

Description : In a weighted-resistor digital-to-analog converter with 8-bit input, if the resistance corresponding to the MSB is 2K, what will be the resistance corresponding to the LSB?  (a) 250 Ω (d) 512 KΩ (c) 256 KΩ (d) 25.5 Ω

Last Answer : In a weighted-resistor digital-to-analog converter with 8-bit input, if the resistance corresponding to the MSB is 2K, what will be the resistance corresponding to the LSB?  (a) 250 Ω (d) 512 KΩ (c) 256 KΩ (d) 25.5 Ω

______ eliminates the varying delay times associated withdifferent-size packets. A) X.25 B) Frame Relay C) ATM D) all of theabove

Description : ______ eliminates the varying delay times associated withdifferent-size packets. A) X.25 B) Frame Relay C) ATM D) all of theabove

Last Answer : ATM

______ is the cell relay protocol designed by the corresponding Forum and adopted by the ITU-T. A) X.25 B) Frame Relay C) ATM D) none of the above

Description : ______ is the cell relay protocol designed by the corresponding Forum and adopted by the ITU-T. A) X.25 B) Frame Relay C) ATM D) none of the above

Last Answer : ATM

________ is a virtual-circuit wide-area network that was designed in response to demands fora new type of WAN in thelate1980s and early 1990s. A) X.25 B) Frame Relay C) ATM D) none of the above

Description : ________ is a virtual-circuit wide-area network that was designed in response to demands fora new type of WAN in thelate1980s and early 1990s. A) X.25 B) Frame Relay C) ATM D) none of the above

Last Answer : Frame Relay

A 8-Mbps tokenring has atoken holding timer value of 10 msec. What is the longest frame (assumeheader bits are negligible) that canbe sent on this ring? A. 8000 B frame B. 80,000 B frame C. 8 x 105 bit frame D. 10,000 B frame

Description : A 8-Mbps tokenring has atoken holding timer value of 10 msec. What is the longest frame (assumeheader bits are negligible) that canbe sent on this ring? A. 8000 B frame B. 80,000 B frame C. 8 x 105 bit frame D. 10,000 B frame

Last Answer : 10,000 B frame

Which protocols adopted the standards of HDLC (High Level Link Control) protocol? a. X.25 protocol as LAPB (Link Access Procedure Balanced, V.42 protocol as LAPM (Link Access Procedure for Modems) b. Frame Relay protocol as LAPF (Link Access Procedure for Frame Relay) c. ISDN (Integrated Services Digital Network) protocol as LAPD (Link Access Procedure on D channel) d. All the above

Description : Which protocols adopted the standards of HDLC (High Level Link Control) protocol? a. X.25 protocol as LAPB (Link Access Procedure Balanced, V.42 protocol as LAPM (Link Access Procedure for ... Services Digital Network) protocol as LAPD (Link Access Procedure on D channel) d. All the above

Last Answer : d. All the above

x4+3x3+3x2+x+1 -Maths 9th

Description : x4+3x3+3x2+x+1 -Maths 9th

Last Answer : Solution: Let p(x)= x4+3x3+3x2+x+1 The zero of x+1 is -1. p(−1)=(−1)4+3(−1)3+3(−1)2+(−1)+1 =1−3+3−1+1 =1 ≠ 0 ∴By factor theorem, x+1 is not a factor of x4+3x3+3x2+x+1

When f(x) = x4 - 2x3 + 3x2 - ax is divided by x + 1 and x - 1 , we get remainders as 19 and 5 respectively . -Maths 9th

Description : When f(x) = x4 - 2x3 + 3x2 - ax is divided by x + 1 and x - 1 , we get remainders as 19 and 5 respectively . -Maths 9th

Last Answer : When f(x) is divided by (x+1) and (x-1) , the remainders are 19 and 5 respectively . ∴ f(-1) = 19 and f(1) = 5 ⇒ (-1)4 - 2 (-1)3 + 3(-1)2 - a (-1) + b = 19 ⇒ 1 +2 + 3 + a + b = 19 ∴ a + b = 13 ------- ... + 3x2 - 5x + 8 ⇒ f(3) = 34 - 2 33 + 3 32 - 5 3 + 8 = 81 - 54 + 27 - 15 + 8 = 47

When f(x) = x4 - 2x3 + 3x2 - ax is divided by x + 1 and x - 1 , we get remainders as 19 and 5 respectively . -Maths 9th

Description : When f(x) = x4 - 2x3 + 3x2 - ax is divided by x + 1 and x - 1 , we get remainders as 19 and 5 respectively . -Maths 9th

Last Answer : When f(x) is divided by (x+1) and (x-1) , the remainders are 19 and 5 respectively . ∴ f(-1) = 19 and f(1) = 5 ⇒ (-1)4 - 2 (-1)3 + 3(-1)2 - a (-1) + b = 19 ⇒ 1 +2 + 3 + a + b = 19 ∴ a + b = 13 ------- ... + 3x2 - 5x + 8 ⇒ f(3) = 34 - 2 33 + 3 32 - 5 3 + 8 = 81 - 54 + 27 - 15 + 8 = 47

If x + 1/x = 3, find the value of x4 + 1/x4 -Maths 9th

Description : If x + 1/x = 3, find the value of x4 + 1/x4 -Maths 9th

Last Answer : Solution :-

When Using the Allocation Rules Engine (ARE) function how can you ensure that all transactions for ABC Office Supplies are divided evenly between cost center 1111 and cost center 2222?

Description : When Using the Allocation Rules Engine (ARE) function how can you ensure that all transactions for ABC Office Supplies are divided evenly between cost center 1111 and cost center 2222?

Last Answer : Need answer

Which of the following is not a binary number? a) 1111 b) 101 c) 11E d) 000

Description : Which of the following is not a binary number? a) 1111 b) 101 c) 11E d) 000

Last Answer : Answer: c Explanation: A binary number can have only two possible digits, 0 and 1. In the third option, there is an alphabet E present which makes it an invalid binary number. Alphabets are only allowed in hexadecimal number system

The BCD equivalent of decimal 912 is ________. 60) A) 1001 0001 0010BCD B) 1001 1000 0001BCD C) 0111 1111 1110BCD D) 0010 001 1001BCD

Description : The BCD equivalent of decimal 912 is ________. 60) A) 1001 0001 0010BCD B) 1001 1000 0001BCD C) 0111 1111 1110BCD D) 0010 001 1001BCD

Last Answer : A) 1001 0001 0010BCD

Decimal equivalent of binary 1111 1111 1111 1111 is

Description : Decimal equivalent of binary 1111 1111 1111 1111 is • 16,384 • 65,536 • 1000000 • None of the above.

Last Answer : Decimal equivalent of binary 1111 1111 1111 1111 is 65,536

The value of the binary 1111 is

Last Answer : The value of the binary 1111 is 24 – 1

Avalanche photodiode receivers can detect bits of transmitted data by receiving a. 100 photons b. 200 photons c. 2000 photons d. 300 photons

Description : Avalanche photodiode receivers can detect bits of transmitted data by receiving a. 100 photons b. 200 photons c. 2000 photons d. 300 photons

Last Answer : 200 photons

______ can be applied whenthe bandwidth of a link (in hertz) is greater than the combined bandwidths of the signals to be transmitted. A) TDMB)FDMC)Both (a)or (b)D)Neither (a) or (b)

Description : ______ can be applied whenthe bandwidth of a link (in hertz) is greater than the combined bandwidths of the signals to be transmitted. A) TDM B) FDM C) Both (a)or (b) D) Neither (a) or (b)

Last Answer : FDM

Before data can be transmitted, they must be transformed to________. A) periodic signals B) electromagnetic signals C) aperiodic signals D) low-frequency sine waves

Description : Before data can be transmitted, they must be transformed to________. A) periodic signals B) electromagnetic signals C) aperiodic signals D) low-frequency sine waves

Last Answer : electromagnetic signals

In SONET, for each byte, the bitsare transmitted ____________. A) from least significant to the most significant B) from most significant tothe least significant C) two at atime D) three at atime

Description : In SONET, for each byte, the bitsare transmitted ____________. A) from least significant to the most significant B) from most significant tothe least significant C) two at atime D) three at atime

Last Answer : from least significant to the most significant

What is the usualnumber of bits transmitted simultaneously inparalleldata transmission used by microcomputers? A. 16 B. 9 C. 8 D. 4 E. None of the above

Description : What is the usualnumber of bits transmitted simultaneously inparalleldata transmission used by microcomputers? A. 16 B. 9 C. 8 D. 4 E. None of the above

Last Answer : 9

Avalanche photodiode receivers candetect hits of transmitted databy receiving A. 100 photons B. 200 photons C. 300 photons D. 400 photons E. None of the above

Description : Avalanche photodiode receivers candetect hits of transmitted databy receiving A. 100 photons B. 200 photons C. 300 photons D. 400 photons E. None of the above

Last Answer : 200 photons