In___________ thereis alwaysa transition at the middle of the bit, but thebit values are determined at the beginningof the bit. If the nextbit is 0, there is a transition; if the next bit is 1, there is none. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

In___________ thereis alwaysa transition at the middle of the bit, but thebit values are determined at the beginningof the bit. If the nextbit is 0,
there is a transition; if the next bit is 1, there is none.
A)
Manchester
B)
differential Manchester
C)
both (a) and (b)
D)
neither (a) nor (b)
by

1 Answer

Answer :

differential Manchester
by

Related questions

In_______encoding, the duration of the bit is divided into twohalves. Thevoltage remains at one level during thefirst half and moves to the other level in the second half. The transition at the middle of the bit provides synchronization. A) Manchester B) differential ManchesteC) both (a) and (b) D) neither (a) nor (b)r

Description : In_______encoding, the duration of the bit is divided into twohalves. Thevoltage remains at one level during thefirst half and moves to the other level in the second half. The transition at the middle of the bit ... Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : both (a) and (b)

_____ encoding has a transition at the middle of each bit. A) RZ B) Manchester C) Differential Manchester D) All the above

Description : _____ encoding has a transition at the middle of each bit. A) RZ B) Manchester C) Differential Manchester D) All the above

Last Answer : All the above

_____ encoding has a transition at the beginning of each 0 bit. A) RZ B) Manchester C) Differential Manchester D) All the above

Description : _____ encoding has a transition at the beginning of each 0 bit. A) RZ B) Manchester C) Differential Manchester D) All the above

Last Answer : Differential Manchester

The idea of RZ andthe ideaof NRZ-I are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Description : The idea of RZ andthe ideaof NRZ-I are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : differential Manchester

The idea of RZ andthe ideaof NRZ-L are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Description : The idea of RZ andthe ideaof NRZ-L are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : Manchester

In Manchester anddifferential Manchester encoding, the transition at the middle of the bit is usedfor __________. A) bit transfer B) baud transfer C) synchronization D) none of the above

Description : In Manchester anddifferential Manchester encoding, the transition at the middle of the bit is usedfor __________. A) bit transfer B) baud transfer C) synchronization D) none of the above

Last Answer : synchronization

In Manchester encoding, does a low-to-high light level transition occurring in the middle of the bit duration represent a binary 1 or a binary 0?

Description : In Manchester encoding, does a low-to-high light level transition occurring in the middle of the bit duration represent a binary 1 or a binary 0?

Last Answer : Binary 0.

Standard Ethernet (10-Mbps) uses_______ encoding A) NRZ B) AMI C) Manchester D) differential Manchester

Description : Standard Ethernet (10-Mbps) uses_______ encoding A) NRZ B) AMI C) Manchester D) differential Manchester

Last Answer : Manchester

The minimum bandwidth of Manchester and differential Manchester is ____that of NRZ. A) the sameas B) twice C) thrice D) none of the above

Description : The minimum bandwidth of Manchester and differential Manchester is ____that of NRZ. A) the sameas B) twice C) thrice D) none of the above

Last Answer : twice

Two common scramblingtechniques are ________. A) NRZ and RZ B) AMI and NRZ C) B8ZS and HDB3 D) Manchester and differential Manchester

Description : Two common scramblingtechniques are ________. A) NRZ and RZ B) AMI and NRZ C) B8ZS and HDB3 D) Manchester and differential Manchester

Last Answer : B8ZS and HDB3

In______, the changeor lackof change in the level of the voltagedetermines the value of the bit. A) NRZ-I B) NRZ-L C) both (a)and (b) D) neither (a) nor (b)

Description : In______, the changeor lackof change in the level of the voltagedetermines the value of the bit. A) NRZ-I B) NRZ-L C) both (a)and (b) D) neither (a) nor (b)

Last Answer : NRZ-I

In_____, the level of the voltagedetermines the valueof the bit. A) NRZ-I B) NRZ-L C) both (a) and (b) D) neither (a) nor (b)

Description : In_____, the level of the voltagedetermines the valueof the bit. A) NRZ-I B) NRZ-L C) both (a) and (b) D) neither (a) nor (b)

Last Answer : NRZ-L

In _________, thereis no resource allocation for a packet. A) datagram switching B) circuit switching C) frame switching D) none of the above

Description : In _________, thereis no resource allocation for a packet. A) datagram switching B) circuit switching C) frame switching D) none of the above

Last Answer : datagram switching

If the baudrate is400 for a QPSK signal, thebit rate is ________ bps. A) 100 B) 400 C) 800 D) 1600

Description : If the baudrate is400 for a QPSK signal, thebit rate is ________ bps. A) 100 B) 400 C) 800 D) 1600

Last Answer : 800

In Ethernet when Manchester encoding is used, the bit rate is: a. Half the baud rate. b. Twice the baud rate. c. Same as the baud rate. d. None of the above

Description : In Ethernet when Manchester encoding is used, the bit rate is: a. Half the baud rate. b. Twice the baud rate. c. Same as the baud rate. d. None of the above

Last Answer : a. Half the baud rate.

Which encoding method uses alternating positive and negative values for1s? A) NRZ-I B) RZ C) Manchester D) AMI

Description : Which encoding method uses alternating positive and negative values for1s? A) NRZ-I B) RZ C) Manchester D) AMI

Last Answer : AMI

In a roll crusher, the specific power consumption and the production rate is affected by the (A) Reduction ratio (B) Differential roll speed (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : In a roll crusher, the specific power consumption and the production rate is affected by the (A) Reduction ratio (B) Differential roll speed (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

The 'transition temperature' for ductile to brittle behaviour of steel increases with increase in the __________ content in steel. (A) Carbon (B) Manganese (C) Both 'a' nor 'b' (D) Neither 'a' nor 'b'

Description : The 'transition temperature' for ductile to brittle behaviour of steel increases with increase in the __________ content in steel. (A) Carbon (B) Manganese (C) Both 'a' nor 'b' (D) Neither 'a' nor 'b'

Last Answer : (A) Carbon

The length of a transition curve, is governed by (A) Rate of change of radial acceleration (B) Rate of change of super-elevation (C) Both (a) and (b) (D) Neither (a) nor (b)

Description : The length of a transition curve, is governed by (A) Rate of change of radial acceleration (B) Rate of change of super-elevation (C) Both (a) and (b) (D) Neither (a) nor (b)

Last Answer : Answer: Option C

The matrix management model is based on a matrix of values between 0 and 9 for two primary variables. Which of the statements given above is/are correct ? (A) 1 only (B) 2 only (C) Both 1 and 2 (D) Neither 1 nor 2

Description : The matrix management model is based on a matrix of values between 0 and 9 for two primary variables. Which of the statements given above is/are correct ? (A) 1 only (B) 2 only (C) Both 1 and 2 (D) Neither 1 nor 2

Last Answer : Answer: Both 1 and 2

A data terminal serves as an a. Effector b. sensor c. both a and b d. neither a nor b

Description : A data terminal serves as an a. Effector b. sensor c. both a and b d. neither a nor b

Last Answer : both a and b

In__________, eachstation is forced to send only at the beginning of the time slot. A) pure ALOHA B) slotted ALOHA C) both (a) and (b) D) neither (a) nor (b)

Description : In__________, eachstation is forced to send only at the beginning of the time slot. A) pure ALOHA B) slotted ALOHA C) both (a) and (b) D) neither (a) nor (b)

Last Answer : slotted ALOHA

Gigabit Ethernet access methods include _______ mode. A) half-duplex B) full-duplex C) both (a) and (b) D) neither (a) nor (b)

Description : Gigabit Ethernet access methods include _______ mode. A) half-duplex B) full-duplex C) both (a) and (b) D) neither (a) nor (b)

Last Answer : both (a) and (b)

_________ does not provide reliable end to end communication. a. TCP b. UDPc. Both TCP and UDP d. Neither TCP nor UDP

Description : _________ does not provide reliable end to end communication. a. TCP b. UDP c. Both TCP and UDP d. Neither TCP nor UDP

Last Answer : b. UDP

A ……………………….. is built from the information exchanged by routing protocols. A. static routing table B. dynamic routing table C. both a and bD. neither a nor b

Description : A ……………………….. is built from the information exchanged by routing protocols. A. static routing table B. dynamic routing table C. both a and b D. neither a nor b

Last Answer : B. dynamic routing table

. A ………………………... is constructed manually by the system administrator using the route command. A. static routing table B. dynamic routing table C. both a and b D. neither a nor b

Description : . A ………………………... is constructed manually by the system administrator using the route command. A. static routing table B. dynamic routing table C. both a and b D. neither a nor b

Last Answer : A. static routing table

Cost of goods sold is determined only at the end of the accounting period in a. a perpetual inventory system. b. a periodic inventory system. c. both a perpetual and a periodic inventory system. d. neither a perpetual nor a periodic inventory system.

Description : Cost of goods sold is determined only at the end of the accounting period in a. a perpetual inventory system. b. a periodic inventory system. c. both a perpetual and a periodic inventory system. d. neither a perpetual nor a periodic inventory system.

Last Answer : b. a periodic inventory system.

In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the first and the last bytes of the payload, respectively are a. Last fragment, 2400 and 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Description : In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the ... 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Last Answer : c. Last fragment, 2400 and 2759

In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the first and the last bytes of the payload, respectively are a. Last fragment, 2400 and 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Description : In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the ... 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Last Answer : c. Last fragment, 2400 and 2759

For what values of x, the function `f(x) = x^(5)-5x^(4)+5x(3)-1` is maximum or minimum? Prove that at x = 0, the function is neither maximum nor minim

Description : For what values of x, the function `f(x) = x^(5)-5x^(4)+5x(3)-1` is maximum or minimum? Prove that at x = 0, the function is neither maximum nor minim

Last Answer : For what values of x, the function `f(x) = x^(5)-5x^(4)+5x(3)-1` is maximum or minimum ... that at x = 0, the function is neither maximum nor minimum.

In IEEE 802.11, _______ isan optionalaccess method that can be implemented inan infrastructure network (not in an ad hocnetwork). A) DCF B) PCF C) either (a) or (b) D) neither (a) nor (b)

Description : In IEEE 802.11, _______ isan optionalaccess method that can be implemented inan infrastructure network (not in an ad hocnetwork). A) DCF B) PCF C) either (a) or (b) D) neither (a) nor (b)

Last Answer : PCF

In IEEE 802.11, a BSS with an AP is sometimes referred toas ____________. A) an ad hocarchitecture B) an infrastructurenetworkC)either (a) or (b)D)neither (a) nor (b)

Description : In IEEE 802.11, a BSS with an AP is sometimes referred toas ____________. A) an ad hocarchitecture B) an infrastructurenetwork C) either (a) or (b) D) neither (a) nor (b)

Last Answer : an infrastructurenetwork

In IEEE 802.11, a BSS without an AP is called an _________. A) an ad hocarchitecture B) an infrastructurenetwork C) either (a) or (b) D) neither (a) nor (b)

Description : In IEEE 802.11, a BSS without an AP is called an _________. A) an ad hocarchitecture B) an infrastructurenetwork C) either (a) or (b) D) neither (a) nor (b)

Last Answer : an ad hocarchitecture

________ is actually a multiport repeater. It is normally usedto createconnections between stations in a physical star topology. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Description : ________ is actually a multiport repeater. It is normally usedto createconnections between stations in a physical star topology. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Last Answer : An activehub

_______ ispart of the media; its location in the Internet model is below thephysical layer. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Description : _______ ispart of the media; its location in the Internet model is below thephysical layer. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Last Answer : A passivehub

In astar-topology Ethernet LAN, _______ is just a point where the signals coming from different stations collide; it is thecollision point. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Description : In astar-topology Ethernet LAN, _______ is just a point where the signals coming from different stations collide; it is thecollision point. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Last Answer : A passivehub

_________is just aconnector. A) An activehub B) A passive hub C) either (a)or (b) D) neither (a)nor (b)

Description : _________is just aconnector. A) An activehub B) A passive hub C) either (a)or (b) D) neither (a)nor (b)

Last Answer : A passive hub

A backbone is usually a ______. A) bus B) star C) either (a)or (b) D) neither (a) nor (b)

Description : A backbone is usually a ______. A) bus B) star C) either (a)or (b) D) neither (a) nor (b)

Last Answer : either (a)or (b)

Analog-to-analog conversionis needed if the available bandwidthis _______. A) low-pass B) band-pass C) either (a)or (b) D) neither (a) nor (b)

Description : Analog-to-analog conversionis needed if the available bandwidthis _______. A) low-pass B) band-pass C) either (a)or (b) D) neither (a) nor (b)

Last Answer : band-pass

A(n)_________ signal is a composite analogsignal with an infinite bandwidth. A) digital B) analog C) either (a)or (b) D) neither (a) nor (b

Description : A(n)_________ signal is a composite analogsignal with an infinite bandwidth. A) digital B) analog C) either (a)or (b) D) neither (a) nor (b

Last Answer : digital

Signals can be ________. A) analog B) digitalC)either (a)or (b)D)neither (a) nor (b)

Description : Signals can be ________. A) analog B) digital C) either (a)or (b) D) neither (a) nor (b)

Last Answer : either (a)or (b)

A ring SONET network can be _________. A) unidirectional B) bidirectional. C) either (a) or (b) D) neither (a) nor (b)

Description : A ring SONET network can be _________. A) unidirectional B) bidirectional. C) either (a) or (b) D) neither (a) nor (b)

Last Answer : bidirectional.

A linear SONET network can be __________. A) point-to-point B) multipoint C) either (a) or (b) D) neither (a) nor (b)

Description : A linear SONET network can be __________. A) point-to-point B) multipoint C) either (a) or (b) D) neither (a) nor (b)

Last Answer : point-to-point

SDH hasdefined ahierarchy of signals called ________. A) STSs B) STMs C) either (a) or (b) D) neither (a) nor (b)

Description : SDH hasdefined ahierarchy of signals called ________. A) STSs B) STMs C) either (a) or (b) D) neither (a) nor (b)

Last Answer : STSs

______ isa standard developed by ITU-T. A) SONET B) SDH C) either (a) or (b) D) neither (a) nor (b)

Description : ______ isa standard developed by ITU-T. A) SONET B) SDH C) either (a) or (b) D) neither (a) nor (b)

Last Answer : either (a) or (b)

isa standard developed by ANSI for fiber-opticnetworks. A) SONET B) SDH C) either (a) or (b) D) neither (a) nor (b)

Description : isa standard developed by ANSI for fiber-opticnetworks. A) SONET B) SDH C) either (a) or (b) D) neither (a) nor (b)

Last Answer : SDH

At the data link layer, Frame Relayusesa protocol that supports _____control. A) flow B) error C) either (a) or (bD)neither (a) nor (b)

Description : At the data link layer, Frame Relayusesa protocol that supports _____control. A) flow B) error C) either (a) or (b D) neither (a) nor (b)

Last Answer : neither (a) nor (b)

In Frame Relay, when. ______ is selected, it requires establishing andterminatingphases A) a PVC B) an SVC C) either (a) or (b) D) neither (a) nor (b)

Description : In Frame Relay, when. ______ is selected, it requires establishing andterminatingphases A) a PVC B) an SVC C) either (a) or (b) D) neither (a) nor (b)

Last Answer : an SVC

In Frame Relay, when a _____ is selected, the correspondingtable entry is recorded for all switches by the administrator A) PVC B) SVC C) either (a) or (b) D) neither (a) nor (b)

Description : In Frame Relay, when a _____ is selected, the correspondingtable entry is recorded for all switches by the administrator A) PVC B) SVC C) either (a) or (b) D) neither (a) nor (b)

Last Answer : PVC

Frame Relay provides ________. A) PVCs B) SVCs C) either (a) or (b) D) neither (a) nor (b)

Description : Frame Relay provides ________. A) PVCs B) SVCs C) either (a) or (b) D) neither (a) nor (b)

Last Answer : Frame Relay