A ring SONET network can be _________. A) unidirectional B) bidirectional. C) either (a) or (b) D) neither (a) nor (b)

A ring SONET network can be _________.
A)
unidirectional
B)
bidirectional.
C)
either (a) or (b)
D)
neither (a) nor (b)
by

1 Answer

Answer :

bidirectional.
by

Related questions

A linear SONET network can be __________. A) point-to-point B) multipoint C) either (a) or (b) D) neither (a) nor (b)

Description : A linear SONET network can be __________. A) point-to-point B) multipoint C) either (a) or (b) D) neither (a) nor (b)

Last Answer : point-to-point

Radio waves are _________. A) omnidirectional B) unidirectional C) bidirectional D) none of the above

Description : Radio waves are _________. A) omnidirectional B) unidirectional C) bidirectional D) none of the above

Last Answer : omnidirectional

______ isa standard developed by ITU-T. A) SONET B) SDH C) either (a) or (b) D) neither (a) nor (b)

Description : ______ isa standard developed by ITU-T. A) SONET B) SDH C) either (a) or (b) D) neither (a) nor (b)

Last Answer : either (a) or (b)

isa standard developed by ANSI for fiber-opticnetworks. A) SONET B) SDH C) either (a) or (b) D) neither (a) nor (b)

Description : isa standard developed by ANSI for fiber-opticnetworks. A) SONET B) SDH C) either (a) or (b) D) neither (a) nor (b)

Last Answer : SDH

Microwaves are_________. A) omnidirectional B) unidirectional C) bidirectional D) none of the above

Description : Microwaves are_________. A) omnidirectional B) unidirectional C) bidirectional D) none of the above

Last Answer : unidirectional

A parabolic dish antenna isa(n)_______ antenna. A) omnidirectional B) bidirectional C) unidirectional D) horn

Description : A parabolic dish antenna isa(n)_______ antenna. A) omnidirectional B) bidirectional C) unidirectional D) horn

Last Answer : unidirectiona

SONET network topologies can be__________. A) linear B) ring C) mesh D) all of theabove

Description : SONET network topologies can be__________. A) linear B) ring C) mesh D) all of theabove

Last Answer : ring

In IEEE 802.11, a BSS without an AP is called an _________. A) an ad hocarchitecture B) an infrastructurenetwork C) either (a) or (b) D) neither (a) nor (b)

Description : In IEEE 802.11, a BSS without an AP is called an _________. A) an ad hocarchitecture B) an infrastructurenetwork C) either (a) or (b) D) neither (a) nor (b)

Last Answer : an ad hocarchitecture

A(n)_________ signal is a composite analogsignal with an infinite bandwidth. A) digital B) analog C) either (a)or (b) D) neither (a) nor (b

Description : A(n)_________ signal is a composite analogsignal with an infinite bandwidth. A) digital B) analog C) either (a)or (b) D) neither (a) nor (b

Last Answer : digital

In IEEE 802.11, _______ isan optionalaccess method that can be implemented inan infrastructure network (not in an ad hocnetwork). A) DCF B) PCF C) either (a) or (b) D) neither (a) nor (b)

Description : In IEEE 802.11, _______ isan optionalaccess method that can be implemented inan infrastructure network (not in an ad hocnetwork). A) DCF B) PCF C) either (a) or (b) D) neither (a) nor (b)

Last Answer : PCF

The …………………... option tells netstat to display the status of all configured network interfaces. A. -n B. -i C. either a or b D. neither a nor b

Description : The …………………... option tells netstat to display the status of all configured network interfaces. A. -n B. -i C. either a or b D. neither a nor b

Last Answer : B. -i

A SONET system can use _________. A) STS multiplexers B) regenerators C) add/drop multiplexers D) all of theabove

Description : A SONET system can use _________. A) STS multiplexers B) regenerators C) add/drop multiplexers D) all of theabove

Last Answer : add/drop multiplexers

A vertical loop antenna has a A. unidirectional radiation pattern in the horizontal plane B. unidirectional radiation pattern in the vertical plane C. omnidirectional radiation pattern in the horizontal plane D. a bidirectional radiation pattern in the horizontal plane

Description : A vertical loop antenna has a A. unidirectional radiation pattern in the horizontal plane B. unidirectional radiation pattern in the vertical plane C. omnidirectional radiation pattern in the horizontal plane D. a bidirectional radiation pattern in the horizontal plane

Last Answer : D. a bidirectional radiation pattern in the horizontal plane

What is the radiation characteristic of a dipole antenna? A. Omnidirectional B. Bidirectional C. Unidirectional D. Hemispherical

Description : What is the radiation characteristic of a dipole antenna? A. Omnidirectional B. Bidirectional C. Unidirectional D. Hemispherical

Last Answer : B. Bidirectional

Discone radiation pattern is ______. A. omnidirectional/vertical polarized B. unidirectional C. bidirectional D. figure of eight

Description : Discone radiation pattern is ______. A. omnidirectional/vertical polarized B. unidirectional C. bidirectional D. figure of eight

Last Answer : A. omnidirectional/vertical polarized

Best description of a collinear and broadside antenna radiation pattern. A. Bidirectional B. Perfect circle C. Unidirectional D. Omnidirectional

Description : Best description of a collinear and broadside antenna radiation pattern. A. Bidirectional B. Perfect circle C. Unidirectional D. Omnidirectional

Last Answer : A. Bidirectional

Radiation characteristics of a dipole A. Figure of eight B. Omnidirectional C. Bidirectional D. Unidirectional

Description : Radiation characteristics of a dipole A. Figure of eight B. Omnidirectional C. Bidirectional D. Unidirectional

Last Answer : C. Bidirectional

Radiation pattern of a discone. A. Unidirectional B. Bidirectional C. Omnidirectional D. Figure of eight

Description : Radiation pattern of a discone. A. Unidirectional B. Bidirectional C. Omnidirectional D. Figure of eight

Last Answer : C. Omnidirectional

In SONET, OC-1 stands for: a. Optical Carrier level one b. Optical Coupler unidirectional c. Optical Channel one d. Optical Cable type 1

Description : In SONET, OC-1 stands for: a. Optical Carrier level one b. Optical Coupler unidirectional c. Optical Channel one d. Optical Cable type 1

Last Answer : a. Optical Carrier level one

_________ does not provide reliable end to end communication. a. TCP b. UDPc. Both TCP and UDP d. Neither TCP nor UDP

Description : _________ does not provide reliable end to end communication. a. TCP b. UDP c. Both TCP and UDP d. Neither TCP nor UDP

Last Answer : b. UDP

In IEEE 802.11, a BSS with an AP is sometimes referred toas ____________. A) an ad hocarchitecture B) an infrastructurenetworkC)either (a) or (b)D)neither (a) nor (b)

Description : In IEEE 802.11, a BSS with an AP is sometimes referred toas ____________. A) an ad hocarchitecture B) an infrastructurenetwork C) either (a) or (b) D) neither (a) nor (b)

Last Answer : an infrastructurenetwork

________ is actually a multiport repeater. It is normally usedto createconnections between stations in a physical star topology. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Description : ________ is actually a multiport repeater. It is normally usedto createconnections between stations in a physical star topology. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Last Answer : An activehub

_______ ispart of the media; its location in the Internet model is below thephysical layer. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Description : _______ ispart of the media; its location in the Internet model is below thephysical layer. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Last Answer : A passivehub

In astar-topology Ethernet LAN, _______ is just a point where the signals coming from different stations collide; it is thecollision point. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Description : In astar-topology Ethernet LAN, _______ is just a point where the signals coming from different stations collide; it is thecollision point. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Last Answer : A passivehub

_________is just aconnector. A) An activehub B) A passive hub C) either (a)or (b) D) neither (a)nor (b)

Description : _________is just aconnector. A) An activehub B) A passive hub C) either (a)or (b) D) neither (a)nor (b)

Last Answer : A passive hub

A backbone is usually a ______. A) bus B) star C) either (a)or (b) D) neither (a) nor (b)

Description : A backbone is usually a ______. A) bus B) star C) either (a)or (b) D) neither (a) nor (b)

Last Answer : either (a)or (b)

Analog-to-analog conversionis needed if the available bandwidthis _______. A) low-pass B) band-pass C) either (a)or (b) D) neither (a) nor (b)

Description : Analog-to-analog conversionis needed if the available bandwidthis _______. A) low-pass B) band-pass C) either (a)or (b) D) neither (a) nor (b)

Last Answer : band-pass

Signals can be ________. A) analog B) digitalC)either (a)or (b)D)neither (a) nor (b)

Description : Signals can be ________. A) analog B) digital C) either (a)or (b) D) neither (a) nor (b)

Last Answer : either (a)or (b)

SDH hasdefined ahierarchy of signals called ________. A) STSs B) STMs C) either (a) or (b) D) neither (a) nor (b)

Description : SDH hasdefined ahierarchy of signals called ________. A) STSs B) STMs C) either (a) or (b) D) neither (a) nor (b)

Last Answer : STSs

At the data link layer, Frame Relayusesa protocol that supports _____control. A) flow B) error C) either (a) or (bD)neither (a) nor (b)

Description : At the data link layer, Frame Relayusesa protocol that supports _____control. A) flow B) error C) either (a) or (b D) neither (a) nor (b)

Last Answer : neither (a) nor (b)

In Frame Relay, when. ______ is selected, it requires establishing andterminatingphases A) a PVC B) an SVC C) either (a) or (b) D) neither (a) nor (b)

Description : In Frame Relay, when. ______ is selected, it requires establishing andterminatingphases A) a PVC B) an SVC C) either (a) or (b) D) neither (a) nor (b)

Last Answer : an SVC

In Frame Relay, when a _____ is selected, the correspondingtable entry is recorded for all switches by the administrator A) PVC B) SVC C) either (a) or (b) D) neither (a) nor (b)

Description : In Frame Relay, when a _____ is selected, the correspondingtable entry is recorded for all switches by the administrator A) PVC B) SVC C) either (a) or (b) D) neither (a) nor (b)

Last Answer : PVC

Frame Relay provides ________. A) PVCs B) SVCs C) either (a) or (b) D) neither (a) nor (b)

Description : Frame Relay provides ________. A) PVCs B) SVCs C) either (a) or (b) D) neither (a) nor (b)

Last Answer : Frame Relay

Which of the following is NOT true about User Datagram Protocol in transport layer?a. Works well in unidirectional communication, suitable for broadcast information. b. It does three way handshake before sending datagrams c. It provides datagrams, suitable for modeling other protocols such as in IP tunneling or Remote Procedure Call and the Network File System d. The lack of retransmission delays makes it suitable for real-time applications

Description : Which of the following is NOT true about User Datagram Protocol in transport layer? a. Works well in unidirectional communication, suitable for broadcast information. b. It does three way ... File System d. The lack of retransmission delays makes it suitable for real-time applications

Last Answer : b. It does three way handshake before sending datagrams

If a firm, or a network firm, has a direct financial interest in an audit client of the firm, the self-interest threat created would be so significant no safeguard could reduce the threat to an acceptable level. The action appropriate to permit the firm to perform the engagement would be to a. Dispose of the financial interest. b. Dispose of a sufficient amount of it so that the remaining interest is no longer material. c. Either a or b d. Neither a nor b

Description : If a firm, or a network firm, has a direct financial interest in an audit client of the firm, the self-interest threat created would be so significant no safeguard could reduce the threat to an acceptable ... that the remaining interest is no longer material. c. Either a or b d. Neither a nor b

Last Answer : Dispose of the financial interest

Each ________in a SONET framecancarry a digitized voice channel. A) bit B) byte C) frame D) none of the above

Description : Each ________in a SONET framecancarry a digitized voice channel. A) bit B) byte C) frame D) none of the above

Last Answer : byte

In SONET, for each byte, the bitsare transmitted ____________. A) from least significant to the most significant B) from most significant tothe least significant C) two at atime D) three at atime

Description : In SONET, for each byte, the bitsare transmitted ____________. A) from least significant to the most significant B) from most significant tothe least significant C) two at atime D) three at atime

Last Answer : from least significant to the most significant

In SONET, for each frame, the bytes are transmitted __________. A) from left to the right, top to bottom B) from right to theleft, bottom to top C) from left to the right, bottom to top D) from right to the left, top to bottom

Description : In SONET, for each frame, the bytes are transmitted __________. A) from left to the right, top to bottom B) from right to theleft, bottom to top C) from left to the right, bottom to top D) from right to the left, top to bottom

Last Answer : from left to the right, bottom to top

To make SONET backward-compatible with the current hierarchy, its framedesign includes asystem of. A) OCs B) STMs C) STSs D) VTs

Description : To make SONET backward-compatible with the current hierarchy, its framedesign includes asystem of. A) OCs B) STMs C) STSs D) VTs

Last Answer : VTs

In SONET each frame lasts _______ microseconds. A) 20 B) 64 C) 128 D) none of the above

Description : In SONET each frame lasts _______ microseconds. A) 20 B) 64 C) 128 D) none of the above

Last Answer : 64

SONET sends ________ frames per second A) 1000 B) 2000 C) 4000 D) 8000

Description : SONET sends ________ frames per second A) 1000 B) 2000 C) 4000 D) 8000

Last Answer : 2000

SONET is a _______ TDM system. A) asynchronous B) synchronous C) statistical D) none of the above

Description : SONET is a _______ TDM system. A) asynchronous B) synchronous C) statistical D) none of the above

Last Answer : none of the above

SONET defines _______ layers. A) twoB)threeC)fourD)five

Description : SONET defines _______ layers. A) two B) three C) four D) five

Last Answer : four

In FDDI, data normally travel on .................. A) The primary ring B) The Secondary ring C) Both rings D) Neither ring

Description : In FDDI, data normally travel on .................. A) The primary ring B) The Secondary ring C) Both rings D) Neither ring

Last Answer : A) The primary ring

The _______ is a unidirectional protocol that has no flow or error control. A. Simplest B. Simplex C. TCP/IP protocol D. Simplest or Simplex

Description : The _______ is a unidirectional protocol that has no flow or error control. A. Simplest B. Simplex C. TCP/IP protocol D. Simplest or Simplex

Last Answer : D. Simplest or Simplex

A data terminal serves as an a. Effector b. sensor c. both a and b d. neither a nor b

Description : A data terminal serves as an a. Effector b. sensor c. both a and b d. neither a nor b

Last Answer : both a and b

In__________, eachstation is forced to send only at the beginning of the time slot. A) pure ALOHA B) slotted ALOHA C) both (a) and (b) D) neither (a) nor (b)

Description : In__________, eachstation is forced to send only at the beginning of the time slot. A) pure ALOHA B) slotted ALOHA C) both (a) and (b) D) neither (a) nor (b)

Last Answer : slotted ALOHA

Gigabit Ethernet access methods include _______ mode. A) half-duplex B) full-duplex C) both (a) and (b) D) neither (a) nor (b)

Description : Gigabit Ethernet access methods include _______ mode. A) half-duplex B) full-duplex C) both (a) and (b) D) neither (a) nor (b)

Last Answer : both (a) and (b)

In___________ thereis alwaysa transition at the middle of the bit, but thebit values are determined at the beginningof the bit. If the nextbit is 0, there is a transition; if the next bit is 1, there is none. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Description : In___________ thereis alwaysa transition at the middle of the bit, but thebit values are determined at the beginningof the bit. If the nextbit is 0, there is a transition; if the next bit is 1, there is none. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : differential Manchester

In_______encoding, the duration of the bit is divided into twohalves. Thevoltage remains at one level during thefirst half and moves to the other level in the second half. The transition at the middle of the bit provides synchronization. A) Manchester B) differential ManchesteC) both (a) and (b) D) neither (a) nor (b)r

Description : In_______encoding, the duration of the bit is divided into twohalves. Thevoltage remains at one level during thefirst half and moves to the other level in the second half. The transition at the middle of the bit ... Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : both (a) and (b)