_________is just aconnector.
A)
An activehub
B)
A passive hub
C)
either (a)or (b)
D)
neither (a)nor (b)

1 Answer

Answer :

A passive hub

Related questions

Description : In astar-topology Ethernet LAN, _______ is just a point where the signals coming from different stations collide; it is thecollision point. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Last Answer : A passivehub

Description : ________ is actually a multiport repeater. It is normally usedto createconnections between stations in a physical star topology. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Last Answer : An activehub

Description : _______ ispart of the media; its location in the Internet model is below thephysical layer. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Last Answer : A passivehub

Description : A ________is a device in which the stations are completely unaware of its existence. A) passive hub B) repeater C) simple bridge D) transparent bridge

Last Answer : transparent bridge

Description : A ______ has a tableused in filtering decisions. A) passive hub B) repeater C) bridge D) none of the above

Last Answer : bridge

Description : A _______ can check the MAC addresses contained inthe frame. A) passive hub B) repeater C) bridge D) route

Last Answer : bridge

Description : A ________operates in both thephysical andthe data link layer. A) passive hub B) repeater C) bridge D) router

Last Answer : bridge

Description : A __________ forwards every frame; it has no filteringcapability. A) passive hub B) repeater C) bridge D) router

Last Answer : repeater

Description : A ________receivesa signal and,before it becomes too weak or corrupted, regenerates the original bit pattern. It thensends the refreshed signal. A) passive hub B) repeater C) bridge D) router

Last Answer : repeater

Description : In IEEE 802.11, _______ isan optionalaccess method that can be implemented inan infrastructure network (not in an ad hocnetwork). A) DCF B) PCF C) either (a) or (b) D) neither (a) nor (b)

Last Answer : PCF

Description : In IEEE 802.11, a BSS with an AP is sometimes referred toas ____________. A) an ad hocarchitecture B) an infrastructurenetwork C) either (a) or (b) D) neither (a) nor (b)

Last Answer : an infrastructurenetwork

Description : In IEEE 802.11, a BSS without an AP is called an _________. A) an ad hocarchitecture B) an infrastructurenetwork C) either (a) or (b) D) neither (a) nor (b)

Last Answer : an ad hocarchitecture

Description : A backbone is usually a ______. A) bus B) star C) either (a)or (b) D) neither (a) nor (b)

Last Answer : either (a)or (b)

Description : Analog-to-analog conversionis needed if the available bandwidthis _______. A) low-pass B) band-pass C) either (a)or (b) D) neither (a) nor (b)

Last Answer : band-pass

Description : A(n)_________ signal is a composite analogsignal with an infinite bandwidth. A) digital B) analog C) either (a)or (b) D) neither (a) nor (b

Last Answer : digital

Description : Signals can be ________. A) analog B) digital C) either (a)or (b) D) neither (a) nor (b)

Last Answer : either (a)or (b)

Description : A ring SONET network can be _________. A) unidirectional B) bidirectional. C) either (a) or (b) D) neither (a) nor (b)

Last Answer : bidirectional.

Description : A linear SONET network can be __________. A) point-to-point B) multipoint C) either (a) or (b) D) neither (a) nor (b)

Last Answer : point-to-point

Description : SDH hasdefined ahierarchy of signals called ________. A) STSs B) STMs C) either (a) or (b) D) neither (a) nor (b)

Last Answer : STSs

Description : ______ isa standard developed by ITU-T. A) SONET B) SDH C) either (a) or (b) D) neither (a) nor (b)

Last Answer : either (a) or (b)

Description : isa standard developed by ANSI for fiber-opticnetworks. A) SONET B) SDH C) either (a) or (b) D) neither (a) nor (b)

Last Answer : SDH

Description : At the data link layer, Frame Relayusesa protocol that supports _____control. A) flow B) error C) either (a) or (b D) neither (a) nor (b)

Last Answer : neither (a) nor (b)

Description : In Frame Relay, when. ______ is selected, it requires establishing andterminatingphases A) a PVC B) an SVC C) either (a) or (b) D) neither (a) nor (b)

Last Answer : an SVC

Description : In Frame Relay, when a _____ is selected, the correspondingtable entry is recorded for all switches by the administrator A) PVC B) SVC C) either (a) or (b) D) neither (a) nor (b)

Last Answer : PVC

Description : Frame Relay provides ________. A) PVCs B) SVCs C) either (a) or (b) D) neither (a) nor (b)

Last Answer : Frame Relay

Description : The …………………... option tells netstat to display the status of all configured network interfaces. A. -n B. -i C. either a or b D. neither a nor b

Last Answer : B. -i

Description : _________is the interface between two ATM switches. A) UNI B) NNI C) NNN D) none of the above

Last Answer : NNI

Description : A sunk key fits in the keyway of the _____ only. a) Hub b) Sleeve c) Both hub and sleeve d) Neither hub nor sleeve

Last Answer : a) Hub

Description : A sunk key fits in the keyway of the _____ only. a) Hub b) Sleeve c) Both hub and sleeve d) Neither hub nor sleeve

Last Answer : a) Hub

Description : A data terminal serves as an a. Effector b. sensor c. both a and b d. neither a nor b

Last Answer : both a and b

Description : In__________, eachstation is forced to send only at the beginning of the time slot. A) pure ALOHA B) slotted ALOHA C) both (a) and (b) D) neither (a) nor (b)

Last Answer : slotted ALOHA

Description : Gigabit Ethernet access methods include _______ mode. A) half-duplex B) full-duplex C) both (a) and (b) D) neither (a) nor (b)

Last Answer : both (a) and (b)

Description : In___________ thereis alwaysa transition at the middle of the bit, but thebit values are determined at the beginningof the bit. If the nextbit is 0, there is a transition; if the next bit is 1, there is none. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : differential Manchester

Description : In_______encoding, the duration of the bit is divided into twohalves. Thevoltage remains at one level during thefirst half and moves to the other level in the second half. The transition at the middle of the bit ... Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : both (a) and (b)

Description : The idea of RZ andthe ideaof NRZ-I are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : differential Manchester

Description : The idea of RZ andthe ideaof NRZ-L are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : Manchester

Description : In______, the changeor lackof change in the level of the voltagedetermines the value of the bit. A) NRZ-I B) NRZ-L C) both (a)and (b) D) neither (a) nor (b)

Last Answer : NRZ-I

Description : In_____, the level of the voltagedetermines the valueof the bit. A) NRZ-I B) NRZ-L C) both (a) and (b) D) neither (a) nor (b)

Last Answer : NRZ-L

Description : _________ does not provide reliable end to end communication. a. TCP b. UDP c. Both TCP and UDP d. Neither TCP nor UDP

Last Answer : b. UDP

Description : A ……………………….. is built from the information exchanged by routing protocols. A. static routing table B. dynamic routing table C. both a and b D. neither a nor b

Last Answer : B. dynamic routing table

Description : . A ………………………... is constructed manually by the system administrator using the route command. A. static routing table B. dynamic routing table C. both a and b D. neither a nor b

Last Answer : A. static routing table

Description : Discuss the role of the HUB. Differentiate between Active Hub and Passive Hub.

Last Answer : HUB: Hub is a connecting device; it is also known as multiport repeater. It is normally used for connecting stations in a physical star topology All networks require a central location to bring media segments ... . They are much expensive than passive hubs. 4. They are not much expensive.

Description : Physiologically active configuration of amino acids: (A) L (B) D (C) For some amino acids it is either of two (D) Neither L nor D

Last Answer : Answer : A

Description : For highly doped diode: a) Zener breakdown is likely to take place b) Avalanche breakdown is likely to take place c) Either (a) or (b) can take place d) Neither (a) nor (b) can take place

Last Answer : Ans: A

Description : An RG-11/U foam coaxial cable has a maximum voltage standing wave of 52 V and a minimum voltage of 17 V. Find the value of the resistive load. A. 24.59Ω B. Either A or C C. 228.75Ω D. Neither A nor C

Last Answer : B. Either A or C

Description : Fluid medium used in the classification technique of mineral beneficiation is (A) Air (B) Water (C) Either (A) or (B) (D) Neither (A) nor (B

Last Answer : (C) Either (A) or (B)

Description : Specific surface area is the surface area of a unit __________ of materials. (A) Weight (B) Volume (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (C) Either (A) or (B)

Description : In a grinding operation, the limiting particle size is the size of the __________ particle in the sample. (A) Smallest (B) Largest (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

Description : According to Einsteins general theory of relativity the universe:--------? A. Must be expanding B. Must be contracting C. Must be either expanding or contracting (Answer) D. Must be neither expanding nor contracting

Last Answer : C. Must be either expanding or contracting (Answer)

Description : The contents of documents may be proved  a) By primary evidence b) By secondary evidence c) Either A or B d) Neither A nor B

Last Answer : c) Either A or B