Binary circuit elements have a. One stable state b. Two stable state c. Three stable state d. None of above

Binary circuit elements have
a. One stable state
b. Two stable state
c. Three stable state
d. None of above
by

1 Answer

Answer :

Two stable state
by

Related questions

Binary circuit elements have A) One stable state B) Two stable state C) Three stable state D) None of above

Description : Binary circuit elements have A) One stable state B) Two stable state C) Three stable state D) None of above

Last Answer : Answer : B

Binary circuit elements have a. One stable state b. Two stable state c. Three stable state d. None of above

Description : Binary circuit elements have a. One stable state b. Two stable state c. Three stable state d. None of above

Last Answer : b. Two stable state

ASCII stands for a. American Stable Code for International Interchange b. American Standard Case for Institutional Interchange c. American Standard Code for Information Interchange d. American Standard Code for Interchange Information

Description : ASCII stands for a. American Stable Code for International Interchange b. American Standard Case for Institutional Interchange c. American Standard Code for Information Interchange d. American Standard Code for Interchange Information

Last Answer : American Standard Code for Information Interchange

Which type of channel it is where the number of users are stable and the traffic is not bursts? A. static channelB. dynamic channel C. free channel D. both a and c

Description : Which type of channel it is where the number of users are stable and the traffic is not bursts? A. static channel B. dynamic channel C. free channel D. both a and c

Last Answer : A. static channel

For a stable phase at constant pressure and temperature, the fugacity of each component in a binary system __________ as its mole fraction increases. (A) Decreases (B) Increases (C) Remain same (D) Decreases linearly

Description : For a stable phase at constant pressure and temperature, the fugacity of each component in a binary system __________ as its mole fraction increases. (A) Decreases (B) Increases (C) Remain same (D) Decreases linearly

Last Answer : (B) Increases

Which number system is commonly used as a shortcut notation for groups of four binary digits? a. Binary b. Decimal c. Octal d. Hexadecimal

Description : Which number system is commonly used as a shortcut notation for groups of four binary digits? a. Binary b. Decimal c. Octal d. Hexadecimal

Last Answer : Hexadecimal

Instructions and memory address are represented by a. Character code b. Binary codes c. Binary word d. Parity bit

Description : Instructions and memory address are represented by a. Character code b. Binary codes c. Binary word d. Parity bit

Last Answer : Binary codes

The proper definition of a modern digital computer is a. An electronic automated machine that can solve problems involving words and numbers b. A more sophistic and modified electronic pocket calculator c. Any machine that can perform mathematical operations d. A machine that works on binary code

Description : The proper definition of a modern digital computer is a. An electronic automated machine that can solve problems involving words and numbers b. A more sophistic and modified electronic pocket calculator c. Any machine that can perform mathematical operations d. A machine that works on binary code

Last Answer : A machine that works on binary code

BCD is a. Binary Coded Decimal b. Bit Coded Decimal c. Binary Coded Digit d. Bit Coded Digit

Description : BCD is a. Binary Coded Decimal b. Bit Coded Decimal c. Binary Coded Digit d. Bit Coded Digit

Last Answer : Binary Coded Decimal

EBCDIC stands for a. Extended Binary Coded Decimal Interchange Code b. Extended Bit Code Decimal Interchange Code c. Extended Bit Case Decimal Interchange Code d. Extended Binary Case Decimal Interchange Code

Description : EBCDIC stands for a. Extended Binary Coded Decimal Interchange Code b. Extended Bit Code Decimal Interchange Code c. Extended Bit Case Decimal Interchange Code d. Extended Binary Case Decimal Interchange Code

Last Answer : Extended Binary Coded Decimal Interchange Code

The transmission signal coding method of TI carrier is called a. Bipolar b. NRZ c. Manchester d. Binary

Description : The transmission signal coding method of TI carrier is called a. Bipolar b. NRZ c. Manchester d. Binary

Last Answer : Bipolar

A bridge can use the _________algorithm tocreate aloopless topology. A) binary tree B) spanning tree C) multiway tree D) none of the abov

Description : A bridge can use the _________algorithm tocreate aloopless topology. A) binary tree B) spanning tree C) multiway tree D) none of the abov

Last Answer : spanning tree

A ________ switch is a multistageswitch with microswitches at each stagethat route the packets based on theoutput port representedas a binary string. A) crossbar B) TSI C) banyan D) none of the above

Description : A ________ switch is a multistageswitch with microswitches at each stagethat route the packets based on theoutput port representedas a binary string. A) crossbar B) TSI C) banyan D) none of the above

Last Answer : banyan

Computeruses the“““.number system to store data and perform calculations. (A) binary (B) octal (C) decimal (D) hexadecimal (E) None of these

Description : Computeruses the“““.number system to store data and perform calculations. (A) binary (B) octal (C) decimal (D) hexadecimal (E) None of these

Last Answer : binary

Error rate is A. an error-detectingcode based ona summation operation performed onthebits to be checked. B. a checkbit appended to anarrayof binary digits to make thesum of all thebinary digits. C. a code in which each expressionconforms to specific rules of construction, so that if certain errors occur in an expression, the resulting expression will not conform to the rulesof constructionand thus thepresence of the errors isdetected. D. the ratioof the number ofdata units in error to the total number of dataunits E. None of the above

Description : Error rate is A. an error-detectingcode based ona summation operation performed onthebits to be checked. B. a checkbit appended to anarrayof binary digits to make thesum of all thebinary digits. C. a ... ratioof the number ofdata units in error to the total number of dataunits E. None of the above

Last Answer : the ratioof the number ofdata units in error to the total number of dataunits

A noiseless 3 KHz Channel transmits bits with binary level signals. What is the maximum data rate? A. 3 Kbps B. 6 Kbps C. 12 Kbps D. 24 Kbps

Description : A noiseless 3 KHz Channel transmits bits with binary level signals. What is the maximum data rate? A. 3 Kbps B. 6 Kbps C. 12 Kbps D. 24 Kbps

Last Answer : 6 Kbps

The ASCII encoding of binary data is called a. base 64 encoding b. base 32 encoding c. base 16 encoding d. base 8 encoding

Description : The ASCII encoding of binary data is called a. base 64 encoding b. base 32 encoding c. base 16 encoding d. base 8 encoding

Last Answer : a. base 64 encoding

What occurs in the session layer? a.Data compression and encryption b.MAC address are handled c.binary to decimal conversion d.sessions are created

Description : What occurs in the session layer? a.Data compression and encryption b.MAC address are handled c.binary to decimal conversion d.sessions are created

Last Answer : d.sessions are created

Let C be a binary linear code with minimum distance 2t + 1 then it can correct upto _____ bits of error. a. t + 1 b. t c. t - 2 d. t / 2

Description : Let C be a binary linear code with minimum distance 2t + 1 then it can correct upto _____ bits of error. a. t + 1 b. t c. t - 2 d. t / 2

Last Answer : b. t

How many possible states does a binary logic circuit have? A. One B. Two C. Three D. Four

Description : How many possible states does a binary logic circuit have? A. One B. Two C. Three D. Four

Last Answer : Answer: B

Which of the following elements react with metals to form their binary compounds exhibiting `-3` oxidation state ?

Description : Which of the following elements react with metals to form their binary compounds exhibiting `-3` oxidation state ?

Last Answer : Which of the following elements react with metals to form their binary compounds exhibiting `-3` oxidation state ? A. N B. P C. As D. Bi

Which of the following elements react with metals to form their binary compounds exhibiting `-3` oxidation state ?

Description : Which of the following elements react with metals to form their binary compounds exhibiting `-3` oxidation state ?

Last Answer : Which of the following elements react with metals to form their binary compounds exhibiting `-3` oxidation state ? A. N B. P C. As D. Bi

The circuit shown in the illustration functions as a ____________. EL-0087 A. pulse trigger circuit for an operational amplifier B. three stage, high gain class 'A' amplifier C. binary ripple counter or shift register D. free running multivibrator

Description : The circuit shown in the illustration functions as a ____________. EL-0087 A. pulse trigger circuit for an operational amplifier B. three stage, high gain class 'A' amplifier C. binary ripple counter or shift register D. free running multivibrator

Last Answer : Answer: C

The multivibrator circuit which processes one stable state and one quasi stable is

Description : The multivibrator circuit which processes one stable state and one quasi stable is   (a) Astabel (b) Monostable (c) Bistable (d) Schmitt trigger circuit

Last Answer : The multivibrator circuit which processes one stable state and one quasi stable is Monostable 

In the future will elements 112-118 and beyond be made stable?

Description : In the future will elements 112-118 and beyond be made stable?

Last Answer : What could possibly be done? This is not chemistry, which deals with changes at the electron level, but changes to the nucleus.

Assign the reason for the following: (a) Enthalpy of fusion of water is higher as compared to the hydrides of Sulphur & Selenium. (b) Water is quite stable and does not dissociate in to its elements even at high temperature.

Description : Assign the reason for the following: (a) Enthalpy of fusion of water is higher as compared to the hydrides of Sulphur & Selenium. (b) Water is quite stable and does not dissociate in to its elements even at high temperature.

Last Answer : Ans-a) Due hydrogen bond it has high latent heat of fusion b) Water is a stable compound and its decomposition is not thermodynamically feasible

Nuclear radiation is emitted by those elements whose: A. molecules are stable B. molecules are unstable C. nuclei are stable D. nuclei are unstable (Answer)

Description : Nuclear radiation is emitted by those elements whose: A. molecules are stable B. molecules are unstable C. nuclei are stable D. nuclei are unstable (Answer)

Last Answer : D. nuclei are unstable (Answer)

For stable structures, one of the important properties of flexibility and stiffness matrices is that the elements on the main diagonal (i) Of a stiffness matrix must be positive (ii) Of a stiffness matrix must be negative (iii) Of a flexibility matrix must be positive (iv) Of a flexibility matrix must be negative The correct answer is (A) (i) and (iii) (B) (ii) and (iii) (C) (i) and (iv) (D) (ii) and (iv)

Description : For stable structures, one of the important properties of flexibility and stiffness matrices is that the elements on the main diagonal (i) Of a stiffness matrix must be positive (ii) Of a stiffness matrix must be negative (iii) Of ... ) (B) (ii) and (iii) (C) (i) and (iv) (D) (ii) and (iv)

Last Answer : (A) (i) and (iii)

Which of the STABLE Group IA elements will have the lowest melting point?

Description : Which of the STABLE Group IA elements will have the lowest melting point?

Last Answer : ANSWER: CESIUM

In________, the phase of thecarrier is varied to represent two or more different signal elements. Both peak amplitude and frequency remain constant. A) ASKB)PSKC)FSKD)QAM

Description : In________, the phase of thecarrier is varied to represent two or more different signal elements. Both peak amplitude and frequency remain constant. A) ASK B) PSK C) FSK D) QAM

Last Answer : PSK

In most Wide Area Networks, the subnet consists of two distinct components: which are they? A. Transmission Lines and Switching Elements. B. host and subnet C. Transmission Lines and host D. subnet and Switching Elements.

Description : In most Wide Area Networks, the subnet consists of two distinct components: which are they? A. Transmission Lines and Switching Elements. B. host and subnet C. Transmission Lines and host D. subnet and Switching Elements.

Last Answer : A. Transmission Lines and Switching Elements.

In________, the amplitude of the carrier signal is varied to create signal elements. Both frequency and phase remainconstant. A) ASK B) PSK C) FSK D) QAM

Description : In________, the amplitude of the carrier signal is varied to create signal elements. Both frequency and phase remainconstant. A) ASK B) PSK C) FSK D) QAM

Last Answer : ASK

The Switching Elements are also called as ………. A. host B. subnet C. Interface Message Processors (IMPs) D. both a and b

Description : The Switching Elements are also called as ………. A. host B. subnet C. Interface Message Processors (IMPs) D. both a and b

Last Answer : C. Interface Message Processors (IMPs)

The phase relationship between signaling elements for BPSK is the optimum signaling format and occurs only when two binary signal levels are allowed and when one signal is the exact negative of the other

Description : The phase relationship between signaling elements for BPSK is the optimum signaling format and occurs only when two binary signal levels are allowed and when one signal is the exact negative of the other

Last Answer : Antipodal signaling

The binary compounds of oxygen with other elements are called oxides. They are classified depending either upon their acid-base characteristics or on

Description : The binary compounds of oxygen with other elements are called oxides. They are classified depending either upon their acid-base characteristics or on

Last Answer : The binary compounds of oxygen with other elements are called oxides. They are classified depending either upon their acid- ... . `H_(2)O` D. `CO_(2)`

The binary compounds of oxygen with other elements are called oxides. They are classified depending either upon their acid-base characteristics or on

Description : The binary compounds of oxygen with other elements are called oxides. They are classified depending either upon their acid-base characteristics or on

Last Answer : The binary compounds of oxygen with other elements are called oxides. They are classified depending either upon their ... P_(2)O_(5)` D. `FeO, CuO`

The binary compounds of oxygen with other elements are called oxides. They are classified depending either upon their acid-base characteristics or on

Description : The binary compounds of oxygen with other elements are called oxides. They are classified depending either upon their acid-base characteristics or on

Last Answer : The binary compounds of oxygen with other elements are called oxides. They are classified depending either upon their ... `Mn_(3)O_(4),N_(2)O_(5)`

The binary compounds of oxygen with other elements are called oxides. They are classified depending either upon their acid-base characteristics or on

Description : The binary compounds of oxygen with other elements are called oxides. They are classified depending either upon their acid-base characteristics or on

Last Answer : The binary compounds of oxygen with other elements are called oxides. They are classified depending either upon their ... C. CO,NO D. `Na_(2),CaO`

The binary compounds of oxygen with other elements are called oxides. They are classified depending either upon their acid-base characteristics or on

Description : The binary compounds of oxygen with other elements are called oxides. They are classified depending either upon their acid-base characteristics or on

Last Answer : The binary compounds of oxygen with other elements are called oxides. They are classified depending either upon their acid- ... . `N_(2)O, C_(3)O_(2)`

IN which set do all elements tend to form anions in binary ionic compounds Question 3 options N S I Ca B K K Ga Pb Fe Hg Na?

Description : IN which set do all elements tend to form anions in binary ionic compounds Question 3 options N S I Ca B K K Ga Pb Fe Hg Na?

Last Answer : Need answer

The binary compound of Hydrogen with S block elements are called as ------------------

Description : The binary compound of Hydrogen with S block elements are called as ------------------

Last Answer : Ans: ionic hydride

As the resources are reserved between two communicating end systems in circuit switching, ___________ is achieved. a) authentication b) guaranteed constant rate c) reliability d) store and forward

Description : As the resources are reserved between two communicating end systems in circuit switching, ___________ is achieved. a) authentication b) guaranteed constant rate c) reliability d) store and forward

Last Answer : b) guaranteed constant rate

Interface electronic circuit is used to interconnect I/O devices to a computer’s CPU oa. ALU b. Memory c. Buffer d. Registerr

Description : Interface electronic circuit is used to interconnect I/O devices to a computer’s CPU or a. ALU b. Memory c. Buffer d. Register

Last Answer : Memory

Personal computers use a number of chips mounted on a main circuit board. What is the common name for such boards? a. Daughter board b. Motherboard c. Father board d. Breadboard

Description : Personal computers use a number of chips mounted on a main circuit board. What is the common name for such boards? a. Daughter board b. Motherboard c. Father board d. Breadboard

Last Answer : Motherboard

The latest PC keyboards use a circuit that senses the movement by the change in its capacitance, a. Capacitance keyboard b. Mechanical keyboard c. Qwerty keyboard d. Dvorak keyboard

Description : The latest PC keyboards use a circuit that senses the movement by the change in its capacitance, a. Capacitance keyboard b. Mechanical keyboard c. Qwerty keyboard d. Dvorak keyboard

Last Answer : Capacitance keyboard

Most important advantage of an IC is its a. Easy replacement in case of circuit failure b. Extremely high reliability c. Reduced cost d. Lower power consumption

Description : Most important advantage of an IC is its a. Easy replacement in case of circuit failure b. Extremely high reliability c. Reduced cost d. Lower power consumption

Last Answer : Extremely high reliability

An integrated circuit is a. A complicated circuit b. An integrating device c. Much costlier than a single transistor d. Fabricated on a tiny silicon chip

Description : An integrated circuit is a. A complicated circuit b. An integrating device c. Much costlier than a single transistor d. Fabricated on a tiny silicon chip

Last Answer : Fabricated on a tiny silicon chip

MSI stands for a. Medium Scale Integrated Circuits b. Medium System Integrated Circuits c. Medium Scale Intelligent Circuit d. Medium System Intelligent Circuit

Description : MSI stands for a. Medium Scale Integrated Circuits b. Medium System Integrated Circuits c. Medium Scale Intelligent Circuit d. Medium System Intelligent Circuit

Last Answer : Medium Scale Integrated Circuits

HDLC isan acronym for _______. A) High-duplex line communication B) High-leveldata link control C) Half-duplex digital link combination D) Hostdouble-level circuit

Description : HDLC isan acronym for _______. A) High-duplex line communication B) High-leveldata link control C) Half-duplex digital link combination D) Hostdouble-level circuit

Last Answer : High-leveldata link control

A local telephone network isan example of a_______ network. A) packet-switched B) circuit-switched C) message-switched D) none of the above

Description : A local telephone network isan example of a_______ network. A) packet-switched B) circuit-switched C) message-switched D) none of the above

Last Answer : circuit-switched