Instructions and memory address are represented by a. Character code b. Binary codes c. Binary word d. Parity bit

Instructions and memory address are represented by
a. Character code
b. Binary codes
c. Binary word
d. Parity bit
by

1 Answer

Answer :

Binary codes
by

Related questions

Instructions and memory address are represented by A) Character code B) Binary codes C) Binary word D) Parity bit

Description : Instructions and memory address are represented by A) Character code B) Binary codes C) Binary word D) Parity bit

Last Answer : Answer : B

Instructions and memory address are represented by a. Character code b. Binary codes c. Binary word d. Parity bit

Description : Instructions and memory address are represented by a. Character code b. Binary codes c. Binary word d. Parity bit

Last Answer : b. Binary codes

Instructions and memory address are represented by a. Character code b. Binary codes c. Binary word d. Parity bit

Description : Instructions and memory address are represented by a. Character code b. Binary codes c. Binary word d. Parity bit

Last Answer : b. Binary codes

Computer instructions written with the use of English words instead of binary machine code is called A) Mnemonics B) Symbolic code C) Gray codes D) Opcode

Description : Computer instructions written with the use of English words instead of binary machine code is called A) Mnemonics B) Symbolic code C) Gray codes D) Opcode

Last Answer : Answer : B

Computer instructions written with the use of English words instead of binary machine code is called a. Mnemonics b. Symbolic code c. Gray codes d. Opcode

Description : Computer instructions written with the use of English words instead of binary machine code is called a. Mnemonics b. Symbolic code c. Gray codes d. Opcode

Last Answer : b. Symbolic code

Computer instructions written with the use of English words instead of binary machine code is called a. Mnemonics b. Symbolic code c. Gray codes d. Opcode

Description : Computer instructions written with the use of English words instead of binary machine code is called a. Mnemonics b. Symbolic code c. Gray codes d. Opcode

Last Answer : b. Symbolic code

Which of the following is associated with error detector? a. Odd parity bit b. Even parity bit c. Both of the above d. None of above

Description : Which of the following is associated with error detector? a. Odd parity bit b. Even parity bit c. Both of the above d. None of above

Last Answer : Both of the above

Which error detection method consists of just one redundant bit per data unit? A) Simple parity check B) Two-dimensionalparity check C) CRC D) Checksum

Description : Which error detection method consists of just one redundant bit per data unit? A) Simple parity check B) Two-dimensionalparity check C) CRC D) Checksum

Last Answer : Simple parity check

How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Last Answer : b. 800

EBCDIC stands for a. Extended Binary Coded Decimal Interchange Code b. Extended Bit Code Decimal Interchange Code c. Extended Bit Case Decimal Interchange Code d. Extended Binary Case Decimal Interchange Code

Description : EBCDIC stands for a. Extended Binary Coded Decimal Interchange Code b. Extended Bit Code Decimal Interchange Code c. Extended Bit Case Decimal Interchange Code d. Extended Binary Case Decimal Interchange Code

Last Answer : Extended Binary Coded Decimal Interchange Code

Given code word 1110001010 is to be transmitted with even parity check bit. The encoded word to be transmitted for this code is (A) 11100010101 (B) 11100010100 (C) 1110001010 (D) 111000101

Description : Given code word 1110001010 is to be transmitted with even parity check bit. The encoded word to be transmitted for this code is (A) 11100010101 (B) 11100010100 (C) 1110001010 (D) 111000101

Last Answer : (A) 11100010101 

__is divided into a number of fields and is represented as a sequence of bits: a. instruction b. — instruction set c. instruction code d. parity code

Description : __is divided into a number of fields and is represented as a sequence of bits: a. instruction b. — instruction set c. instruction code d. parity code

Last Answer : a. instruction

A simple parity-check code can detect __________ errors A. an even-number of B. two C. no errors D. an odd-number of

Description : A simple parity-check code can detect __________ errors A. an even-number of B. two C. no errors D. an odd-number of

Last Answer : D. an odd-number of

ASCII and EBCDIC are the popular character coding systems. What does EBCDIC stand for? A) Extended Binary Coded Decimal Interchange Code B) Extended Bit Code Decimal Interchange Code C) Extended Bit Case Decimal Interchange Code D) Extended Binary Case Decimal Interchange Code

Description : ASCII and EBCDIC are the popular character coding systems. What does EBCDIC stand for? A) Extended Binary Coded Decimal Interchange Code B) Extended Bit Code Decimal Interchange Code C) Extended Bit Case Decimal Interchange Code D) Extended Binary Case Decimal Interchange Code

Last Answer : Answer : A

Each check bit is grouped with the information bits as specified by a__ a. Parity check code b. Parity check matrix c. Parity check bit d. All of these

Description : Each check bit is grouped with the information bits as specified by a__ a. Parity check code b. Parity check matrix c. Parity check bit d. All of these

Last Answer : b. Parity check matrix

The digital signals can be represented by: a) Binary Codes b) 0 and 1 c) High and Low d) All of The Above e) None of The Above

Description : The digital signals can be represented by: a) Binary Codes b) 0 and 1 c) High and Low d) All of The Above e) None of The Above

Last Answer : d) All of The Above

What will be the hexadecimal value in the register ax (32-bit) after executing the following instructions? Mov al, 15 Mov ah, 15 Xor al, al Mov cl, 3 Shr ax, cl Codes: (A) 0F00 h (B) 0F0F h (C) 01E0 h (D) FFFF h

Description : What will be the hexadecimal value in the register ax (32-bit) after executing the following instructions? Mov al, 15 Mov ah, 15 Xor al, al Mov cl, 3 Shr ax, cl Codes: (A) 0F00 h (B) 0F0F h (C) 01E0 h (D) FFFF h

Last Answer : (C) 01E0 h

Error detection ata data link level is achieved by A. bit stuffing B. cyclic redundancy codes C. Hamming codes D. equalization

Description : Error detection ata data link level is achieved by A. bit stuffing B. cyclic redundancy codes C. Hamming codes D. equalization

Last Answer : cyclic redundancy codes

3 bit binary numbers can be represented by a. Binary number b. Decimal number Cc. Hexadecimal number d. Octal number

Description : 3 bit binary numbers can be represented by a. Binary number b. Decimal number Cc. Hexadecimal number d. Octal number

Last Answer : d. Octal number

BCD is a. Binary Coded Decimal b. Bit Coded Decimal c. Binary Coded Digit d. Bit Coded Digit

Description : BCD is a. Binary Coded Decimal b. Bit Coded Decimal c. Binary Coded Digit d. Bit Coded Digit

Last Answer : Binary Coded Decimal

The process of starting a or restarting a computer system by loading instructions from a secondary storage device into the computer memory is called a. Duping b. Booting c. Padding d. CPS

Description : The process of starting a or restarting a computer system by loading instructions from a secondary storage device into the computer memory is called a. Duping b. Booting c. Padding d. CPS

Last Answer : Booting

What is used to identify whether a data word has an odd or even number of 1’s ? (1) Carry bit (2) Sign bit (3) Zero bit (4) Parity bit

Description : What is used to identify whether a data word has an odd or even number of 1’s ? (1) Carry bit (2) Sign bit (3) Zero bit (4) Parity bit

Last Answer : Parity bit

Mnemonic refers to. a Instructions b. Code c. Symbolic codes d Assembler

Description : Mnemonic refers to. a Instructions b. Code c. Symbolic codes d Assembler

Last Answer : c. Symbolic codes

What occurs in the session layer? a.Data compression and encryption b.MAC address are handled c.binary to decimal conversion d.sessions are created

Description : What occurs in the session layer? a.Data compression and encryption b.MAC address are handled c.binary to decimal conversion d.sessions are created

Last Answer : d.sessions are created

While transmitting odd-parity coded symbols, the number of zeros in each symbol is a. odd b. even c. a and b both d. unknown

Description : While transmitting odd-parity coded symbols, the number of zeros in each symbol is a. odd b. even c. a and b both d. unknown

Last Answer : unknown

Which error detection method usesone's complement arithmetic? A) Simple parity check B) Two-dimensionalparity check C) CRC D) Checksum

Description : Which error detection method usesone's complement arithmetic? A) Simple parity check B) Two-dimensionalparity check C) CRC D) Checksum

Last Answer : Checksum

How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Description : How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Last Answer : b. 12,000 bytes

The technique of temporarily delaying outgoing acknowledgements so that they can be hooked onto the next outgoing data frame is called ____________ a. piggybacking b. cyclic redundancy check c. fletcher’s checksum d. parity check

Description : The technique of temporarily delaying outgoing acknowledgements so that they can be hooked onto the next outgoing data frame is called ____________ a. piggybacking b. cyclic redundancy check c. fletcher’s checksum d. parity check

Last Answer : a. piggybacking

Which error detection method uses one's complement arithmetic? A. Simple parity check B. Two-dimensional parity check C. CRC D. Checksum

Description : Which error detection method uses one's complement arithmetic? A. Simple parity check B. Two-dimensional parity check C. CRC D. Checksum

Last Answer : D. Checksum

The technique of temporarily delaying outgoing acknowledgements so that they can be hooked onto the next outgoing data frame is called ____________ A. piggybacking B. cyclic redundancy check C. fletcher’s checksum D. parity check

Description : The technique of temporarily delaying outgoing acknowledgements so that they can be hooked onto the next outgoing data frame is called ____________ A. piggybacking B. cyclic redundancy check C. fletcher’s checksum D. parity check

Last Answer : A. piggybacking

170. A character is represented in EBCDIC by: a) One bit b) Four bits c) Eight bits d) None of The Above

Description : 170. A character is represented in EBCDIC by: a) One bit b) Four bits c) Eight bits d) None of The Above

Last Answer : c) Eight bits

A character of information is represented by a(n)- 1) Byte 2) Bit 3) Field 4) None of these

Description : A character of information is represented by a(n)- 1) Byte 2) Bit 3) Field 4) None of these

Last Answer : 1) Byte

The most common protocol for point-to-pointaccess is the Point-to-Point Protocol (PPP), which is a _________protocol. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above

Description : The most common protocol for point-to-pointaccess is the Point-to-Point Protocol (PPP), which is a _________protocol. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above

Last Answer : byte-oriented

High-level Data Link Control (HDLC) is a _______ protocol for communication over point-to-pointand multipoint links. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above

Description : High-level Data Link Control (HDLC) is a _______ protocol for communication over point-to-pointand multipoint links. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above

Last Answer : bit-oriented

has the property that corrupting or garbling a code word will likely produce a bit string that is not a code word: a. Error deleting codes b. Error detecting codes c. Error string codes

Description : has the property that corrupting or garbling a code word will likely produce a bit string that is not a code word: a. Error deleting codes b. Error detecting codes c. Error string codes

Last Answer : b. Error detecting codes

Find out the incorrect feature of Assembly language among following: a) It is also provided by the manufacturer b) One instruction for each computer operation c) Instruction codes are represented by mnemonics (a set of letters) and the code must be assembled into machine language for execution d) All of the Above e) None of These

Description : Find out the incorrect feature of Assembly language among following: a) It is also provided by the manufacturer b) One instruction for each computer operation c) Instruction codes are represented by mnemonics ... be assembled into machine language for execution d) All of the Above e) None of These

Last Answer : e) None of These

Codes must be A. agreed upon in advance between sender and receiver B. eight bit per character C. the same in all modern computer D. either seven or eighth bits per character

Description : Codes must be A. agreed upon in advance between sender and receiver B. eight bit per character C. the same in all modern computer D. either seven or eighth bits per character

Last Answer : A. agreed upon in advance between sender and receiver

Codes consisting of lines of varying widths or lengths that arecomputer-readable are known as– (A) an ASCII code (B) a magnetic tape (C) an OCR scanner (D) a bar code (E) None of these

Description : Codes consisting of lines of varying widths or lengths that arecomputer-readable are known as– (A) an ASCII code (B) a magnetic tape (C) an OCR scanner (D) a bar code (E) None of these

Last Answer : a bar code

A DMA controller transfers 32-bit words to memory using cycle Stealing. The words are assembled from a device that transmits characters at a rate of 4800 characters per second. The CPU is fetching and executing instructions at an average rate of one million instructions per second. By how much will the CPU be slowed down because of the DMA transfer? (A) 0.06% (B) 0.12% (C) 1.2% (D) 2.5%

Description : A DMA controller transfers 32-bit words to memory using cycle Stealing. The words are assembled from a device that transmits characters at a rate of 4800 characters per second. The CPU is fetching and executing instructions at an average ... of the DMA transfer? (A) 0.06% (B) 0.12% (C) 1.2% (D) 2.5%

Last Answer : Answer: B

In Ethernet addressing, if the least significant bit of the firstbyte is 1, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Description : In Ethernet addressing, if the least significant bit of the firstbyte is 1, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : multicast

In Ethernet addressing, if the least significant bit of the firstbyte is 0, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Description : In Ethernet addressing, if the least significant bit of the firstbyte is 0, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : unicast

Each station on an Ethernet network has a unique _______ address imprinted onits network interface card (NIC). A) 5-byte B) 32-bit C) 48-bit D) none of the above

Description : Each station on an Ethernet network has a unique _______ address imprinted onits network interface card (NIC). A) 5-byte B) 32-bit C) 48-bit D) none of the above

Last Answer : 48-b

In hexadecimal colon notation, a 128-bit address isdivided into _______ sections, each _____hexadecimal digits in length. A) 8: 2 B) 8: 3 C) 8: 4 D) none of the above

Description : In hexadecimal colon notation, a 128-bit address isdivided into _______ sections, each _____hexadecimal digits in length. A) 8: 2 B) 8: 3 C) 8: 4 D) none of the above

Last Answer : 8: 4

The least significant 23 bits in a 48-bit Ethernet address identify a ________. A) multicast router B) host C) multicast group D) noneof the above

Description : The least significant 23 bits in a 48-bit Ethernet address identify a ________. A) multicast router B) host C) multicast group D) noneof the above

Last Answer : multicast group

The address of a class B host is to be split into subnets with a 6-bit subnet number. What is the maximum number of subnets and the maximum number of hosts in each subnet? a. 62 subnets and 262142 hosts. b. 64 subnets and 262142 hosts. c. 62 subnets and 1022 hosts. d. 64 subnets and 1024 hosts

Description : The address of a class B host is to be split into subnets with a 6-bit subnet number. What is the maximum number of subnets and the maximum number of hosts in each subnet? a. 62 subnets and 262142 hosts. b. 64 subnets and 262142 hosts. c. 62 subnets and 1022 hosts. d. 64 subnets and 1024 hosts

Last Answer : c. 62 subnets and 1022 hosts.

Length of Port address in TCP/IP is A. 8 bit long B. 4 bit long C. 32 bit long D. 16 bit long

Description : Length of Port address in TCP/IP is A. 8 bit long B. 4 bit long C. 32 bit long D. 16 bit long

Last Answer : D. 16 bit long

What is the size of an IP address? A. 64 bit B. 128 bit C. 16 bit D. 32 bit

Description : What is the size of an IP address? A. 64 bit B. 128 bit C. 16 bit D. 32 bit

Last Answer : D. 32 bit

Length of Port address in TCP/IP is a. 8 bit long b. 4 bit long c. 32 bit long d. 16 bit long

Description : Length of Port address in TCP/IP is a. 8 bit long b. 4 bit long c. 32 bit long d. 16 bit long

Last Answer : d. 16 bit long

The proper definition of a modern digital computer is a. An electronic automated machine that can solve problems involving words and numbers b. A more sophistic and modified electronic pocket calculator c. Any machine that can perform mathematical operations d. A machine that works on binary code

Description : The proper definition of a modern digital computer is a. An electronic automated machine that can solve problems involving words and numbers b. A more sophistic and modified electronic pocket calculator c. Any machine that can perform mathematical operations d. A machine that works on binary code

Last Answer : A machine that works on binary code

Error rate is A. an error-detectingcode based ona summation operation performed onthebits to be checked. B. a checkbit appended to anarrayof binary digits to make thesum of all thebinary digits. C. a code in which each expressionconforms to specific rules of construction, so that if certain errors occur in an expression, the resulting expression will not conform to the rulesof constructionand thus thepresence of the errors isdetected. D. the ratioof the number ofdata units in error to the total number of dataunits E. None of the above

Description : Error rate is A. an error-detectingcode based ona summation operation performed onthebits to be checked. B. a checkbit appended to anarrayof binary digits to make thesum of all thebinary digits. C. a ... ratioof the number ofdata units in error to the total number of dataunits E. None of the above

Last Answer : the ratioof the number ofdata units in error to the total number of dataunits