Assign the reason for the following: (a) Enthalpy of fusion of water is higher as compared to the hydrides of Sulphur & Selenium. (b) Water is quite stable and does not dissociate in to its elements even at high temperature.

Assign the reason for the following:
(a) Enthalpy of fusion of water is higher as compared to the hydrides of
Sulphur & Selenium.
(b) Water is quite stable and does not dissociate in to its elements even at high temperature.
by

1 Answer

Answer :

Ans-a) Due hydrogen bond it has high latent heat of fusion
 b) Water is a stable compound and its decomposition is not thermodynamically feasible
by

Related questions

Give reasons : (a) Diamond and rhombic Sulphur are covalent solids, but the latter has lower melting points. (b) Among NaCl and CsCl, CsCl is quite stable.

Description : Give reasons : (a) Diamond and rhombic Sulphur are covalent solids, but the latter has lower melting points. (b) Among NaCl and CsCl, CsCl is quite stable.

Last Answer : (a) Due to weak Vander Waal’s Force in Sulphur molecule. (b) CsCl coordination number is 8. It is surrounded by 8 anion tightly. 

The most acidic and most thermally stable set of chalcogen hydrides are respectively:

Description : The most acidic and most thermally stable set of chalcogen hydrides are respectively:

Last Answer : The most acidic and most thermally stable set of chalcogen hydrides are respectively: A. `H_(2)O,H_(2)s` B. `H_(2) ... )O,H_(2)Te` D. `H_(2)S,H_(2)Te`

Electrolytic reduction cell used for conversion of calcined Al2O3to Al is a carbon lined furnace operating at 800-900 °C. The purpose of electric current supplied to the furnace is to (A) Achieve very high purity of aluminium (99.9%) (B) Keep the electrolyte in liquid condition by the generation of heat (C) Electrolytically dissociate alumina (D) Both (B) & (C)

Description : Electrolytic reduction cell used for conversion of calcined Al2O3to Al is a carbon lined furnace operating at 800-900 °C. The purpose of electric current supplied to the furnace is to (A) Achieve very high ... by the generation of heat (C) Electrolytically dissociate alumina (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

Which of the following elements would most likely be a silvery solid at room temperature? w) Sodium x) Silicon y) Selenium z) Astatine

Description : Which of the following elements would most likely be a silvery solid at room temperature? w) Sodium x) Silicon y) Selenium z) Astatine

Last Answer : ANSWER: W -- SODIUM

Coal tar fuels (CTF) as compared to petroleum based fuel oils have higher (A) Calorific value (B) Higher C/H ratio (C) Sulphur content (D) Difference in gross & net calorific value

Description : Coal tar fuels (CTF) as compared to petroleum based fuel oils have higher (A) Calorific value (B) Higher C/H ratio (C) Sulphur content (D) Difference in gross & net calorific value

Last Answer : (B) Higher C/H ratio

The basic strength of the hydrides of group 15 elements :

Description : The basic strength of the hydrides of group 15 elements :

Last Answer : The basic strength of the hydrides of group 15 elements : A. decreases on moving down the group ... first increases upto `AsH_(3)` and then decreases

The basic strength of the hydrides of group 15 elements :

Description : The basic strength of the hydrides of group 15 elements :

Last Answer : The basic strength of the hydrides of group 15 elements : A. decreases on moving down the group ... first increases upto `AsH_(3)` and then decreases

(A) : Thermal stability of the hydrides of VIA group elements decreases from `H_(2)O` to `H_(2)Po` (R) : The heats of dissociation of M - H bond of hy

Description : (A) : Thermal stability of the hydrides of VIA group elements decreases from `H_(2)O` to `H_(2)Po` (R) : The heats of dissociation of M - H bond of hy

Last Answer : (A) : Thermal stability of the hydrides of VIA group elements decreases from `H_(2)O` to `H_(2)Po` (R) : ... is false D. (A) is false but (R) is true

The statements regarding hydrides of VIA group elements are i) The order of volatility `H_(2)OltH_(2)TeltH_(2)SeltH_(2)S` ii) The order of B.P `H_(2)O

Description : The statements regarding hydrides of VIA group elements are i) The order of volatility `H_(2)OltH_(2)TeltH_(2)SeltH_(2)S` ii) The order of B.P `H_(2)O

Last Answer : The statements regarding hydrides of VIA group elements are i) The order of volatility `H_(2)OltH_(2)TeltH_ ... are correct D. `i` & iii are correct

The maximum bond angle in hydrides of group 16 elements is in

Description : The maximum bond angle in hydrides of group 16 elements is in

Last Answer : The maximum bond angle in hydrides of group 16 elements is in A. `H_(2)O` B. `H_(2)Se` C. `H_(2)S` D. `H_(2)Te`

Assertion :- Water in liquid state is more stable than ice at room temperature. Reason :- Water in liquid from has higher entropy than ice.

Description : Assertion :- Water in liquid state is more stable than ice at room temperature. Reason :- Water in liquid from has higher entropy than ice.

Last Answer : Assertion :- Water in liquid state is more stable than ice at room temperature. Reason :- Water in ... . D. If both Assertion & Reason are false.

Name the classes of Hydrides to which H2O, B2H6 & NaH belong

Description : Name the classes of Hydrides to which H2O, B2H6 & NaH belong

Last Answer : Ans. H2O—Covalent B2H6- Covalent NaH- Ionic

What is the sign of enthalpy of formation of highly stable compound?

Description : What is the sign of enthalpy of formation of highly stable compound?

Last Answer : Ans. Negative.

From the elements: Cl, Br, F, O, Al, C, Li, Cs and Xe; choose the following: (a) The element with highest negative electron gain enthalpy. (b) The element with lowest ionization enthalpy. (c) The element with smallest ionic radius. (d) The element with six electrons in the valence shell. (e) The element which is a liquid at room temperature. (f)The element which belongs to zero group. (g) The elements which forms largest number of compounds.

Description : From the elements: Cl, Br, F, O, Al, C, Li, Cs and Xe; choose the following: (a) The element with highest negative electron gain enthalpy. (b) The element with lowest ionization enthalpy. ( ... . (f)The element which belongs to zero group. (g) The elements which forms largest number of compounds.

Last Answer : Ans. (a). The element chlorine (Cl) has the highest negative electron gain enthalpy. (b). The element cesium (Cs) has lowest ionization enthalpy. (c). The element fluorine F has lowest atomic radius. (d ... zero group (or group 18). (g). The element carbon (C) forms the largest number of compounds.

The Indian peninusula as compared to the north Indian plains is (a) Rich in mineral (b) More stable (c) At a higher level (d) All the above

Description : The Indian peninusula as compared to the north Indian plains is (a) Rich in mineral (b) More stable (c) At a higher level (d) All the above

Last Answer : Ans: (d)

(i)What are sign conventions used for Heat and Work? (ii).Neither ‘q’ nor ‘w’ is a state function but “ q + w” is a state function. Assign reason.

Description : (i)What are sign conventions used for Heat and Work? (ii).Neither ‘q’ nor ‘w’ is a state function but “ q + w” is a state function. Assign reason.

Last Answer : Ans. (i)Heat absorbed by the system = +ve Heat evolved by the system = -ve Work done by the system = -ve Work done on the system = +ve (ii)ΔU = q + w and ‘∆U’ is a state function, which depends upon initial and final states of the system and not upon its path.

Graphite is used as anode and not diamond. Assign reason.

Description : Graphite is used as anode and not diamond. Assign reason. 

Last Answer : Ans. In graphite there are free electrons which helps in electricalconductivity. 

Assertion :- Oxidation state of Hydrogen is `+1` in `H_(2)O` while `-1` in `CaH_(2)`. Reason :- `CaH_(2)` is a metal hydride and for metal hydrides, h

Description : Assertion :- Oxidation state of Hydrogen is `+1` in `H_(2)O` while `-1` in `CaH_(2)`. Reason :- `CaH_(2)` is a metal hydride and for metal hydrides, h

Last Answer : Assertion :- Oxidation state of Hydrogen is `+1` in `H_(2)O` while `-1` in `CaH_(2)`. ... Reason is False. D. If both Assertion & Reason are False.

Asseration: The thermal stability of hydrides of oxygen family decrease with molecular weight. Reason: The decomposition of `M-H` bond requires lesser

Description : Asseration: The thermal stability of hydrides of oxygen family decrease with molecular weight. Reason: The decomposition of `M-H` bond requires lesser

Last Answer : Asseration: The thermal stability of hydrides of oxygen family decrease with molecular weight. Reason: The decomposition ... in `O-H` than `S-H`.

A good metallurgical coke should have very low (A) Sulphur & phosphorous content (B) Porosity (C) Fusion point of its ash (D) Hardness & strength

Description : A good metallurgical coke should have very low (A) Sulphur & phosphorous content (B) Porosity (C) Fusion point of its ash (D) Hardness & strength

Last Answer : (A) Sulphur & phosphorous content

Washing of coal (A) Reduces its ash & sulphur content (B) Improves its coking properties (C) Increase the fusion point of its ash by removing chlorine compounds (D) All (A), (B) and (C)

Description : Washing of coal (A) Reduces its ash & sulphur content (B) Improves its coking properties (C) Increase the fusion point of its ash by removing chlorine compounds (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Of the nonmetallic elements the one least likely to be found in organic compounds is: w) nitrogen x) phosphorus y) chlorine z) selenium

Description : Of the nonmetallic elements the one least likely to be found in organic compounds is: w) nitrogen x) phosphorus y) chlorine z) selenium

Last Answer : ANSWER: Z -- SELENIUM

Metallic constituent of “Glucose tolerance factor” is (A) Sulphur (B) Cobalt (C) Chromium (D) Selenium

Description : Metallic constituent of “Glucose tolerance factor” is (A) Sulphur (B) Cobalt (C) Chromium (D) Selenium

Last Answer : Answer : C

Which one of the following non-metals is not a poor conductor of electricity? (1) Sulphur (2) Selenium (3) Bromine (4) Phosphorus

Description : Which one of the following non-metals is not a poor conductor of electricity? (1) Sulphur (2) Selenium (3) Bromine (4) Phosphorus

Last Answer : (2) Selenium Explanation: Selenium is a non-metallic element; it is not a very good conductor of heat and electricity.

Minerals known to be required in large amounts for plant growth include (a) potassium, phosphorus, selenium, boron (b) magnesium, sulphur, iron, zinc (c) phosphorus, potassium, sulphur, calcium (d) calcium, magnesium, manganese, copper.

Description : Minerals known to be required in large amounts for plant growth include (a) potassium, phosphorus, selenium, boron (b) magnesium, sulphur, iron, zinc (c) phosphorus, potassium, sulphur, calcium (d) calcium, magnesium, manganese, copper.

Last Answer : (c) phosphorus, potassium, sulphur, calcium

Classify the following materials as metals and non-metals : Hydrogen, Sulphur, Selenium, Manganese, Calcium, Platinum, Gold, Silica, Polyester, Wood, Glass, Iron

Description : Classify the following materials as metals and non-metals : Hydrogen, Sulphur, Selenium, Manganese, Calcium, Platinum, Gold, Silica, Polyester, Wood, Glass, Iron 

Last Answer : Metals: calcium , manganese, platinum, gold , iron Non- metals: hydrogen, Sulphur, silica, polyester, wood, glass, selenium

The efficiency of superheat Rankine cycle is higher than that of simple Rankine cycle because [GATE-2002] (a) The enthalpy of main steam is higher for superheat cycle (b) The mean temperature of heat addition is higher for superheat cycle (c) The temperature of steam in the condenser is high (d) The quality of stem in the condenser is low

Description : The efficiency of superheat Rankine cycle is higher than that of simple Rankine cycle because [GATE-2002] (a) The enthalpy of main steam is higher for superheat cycle (b) The mean temperature of heat ... temperature of steam in the condenser is high (d) The quality of stem in the condenser is low 

Last Answer :  (b) The mean temperature of heat addition is higher for superheat cycle  

Pitch creosote mixture (PCM) as compared to furnace oil is a better fuel, because its (A) Emissivity factor is higher (B) Sulphur content is lower (C) Flue gas has lower dew point thereby facilitating more waste heat recovery (D) All (A), (B) and (C)

Description : Pitch creosote mixture (PCM) as compared to furnace oil is a better fuel, because its (A) Emissivity factor is higher (B) Sulphur content is lower (C) Flue gas has lower dew point thereby facilitating more waste heat recovery (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Catalytic cracking compared to thermal cracking of residue of vacuum distillation of crude oil (A) Gives higher yield of petrol (B) Lower octane number of petrol (C) Higher sulphur content in the product (D) Higher gum forming material in petro

Description : Catalytic cracking compared to thermal cracking of residue of vacuum distillation of crude oil (A) Gives higher yield of petrol (B) Lower octane number of petrol (C) Higher sulphur content in the product (D) Higher gum forming material in petro

Last Answer : (A) Gives higher yield of petrol

All of the following statements about uric acid are true except (A) It can be formed from allantoin (B) Formation of uric acid stones in kidneys can be decreased by alkalinisation of urine (C) Uric acid begins to dissociate at pH above 5.8 (D) It is present in plasma mainly as monosodium urate

Description : All of the following statements about uric acid are true except (A) It can be formed from allantoin (B) Formation of uric acid stones in kidneys can be decreased by alkalinisation of urine (C) Uric acid begins to dissociate at pH above 5.8 (D) It is present in plasma mainly as monosodium urate

Last Answer : Answer : A

Ribozymes are (A) Enzymes present in ribosomes (B) Enzymes which combine the ribosomal subunits (C) Enzymes which dissociate (D) Enzymes made up of RNA

Description : Ribozymes are (A) Enzymes present in ribosomes (B) Enzymes which combine the ribosomal subunits (C) Enzymes which dissociate (D) Enzymes made up of RNA

Last Answer : Answer : D

The excess energy of the reactants required to dissociate into products is known as the __________ energy. (A) Thermal (B) Activation (C) Threshold (D) Binding

Description : The excess energy of the reactants required to dissociate into products is known as the __________ energy. (A) Thermal (B) Activation (C) Threshold (D) Binding

Last Answer : (B) Activation

The excess energy of reactants in a chemical reaction required to dissociate into products is termed as the __________ energy. (A) Activation (B) Potential (C) Binding (D) Threshold

Description : The excess energy of reactants in a chemical reaction required to dissociate into products is termed as the __________ energy. (A) Activation (B) Potential (C) Binding (D) Threshold

Last Answer : (A) Activation

Where man is, there I am I'm nat'ral, man makes me I'm a shield, a weapon I enchain to release A stable foundation Though ever evolving My body is quite vast Though I'm not physical I have many branches I'm not a tree or plant No guesses, you know me now No mercy, if you are wrong What am I? -Riddles

Description : Where man is, there I am I'm nat'ral, man makes me I'm a shield, a weapon I enchain to release A stable foundation Though ever evolving My body is quite vast Though I'm not physical I have many branches ... a tree or plant No guesses, you know me now No mercy, if you are wrong What am I? -Riddles

Last Answer : Law.

Realising that his new video game will be on the edge of contributing some profit in its second year, Gary lobbies hard to have the accounting department assign other projects in the firm higher levels of certain arbitrarily assigned costs. These costs are called __________ costs. A)fixed B)variable C)traceable common D)nontraceable common

Description : Realising that his new video game will be on the edge of contributing some profit in its second year, Gary lobbies hard to have the accounting department assign other projects in the firm ... . These costs are called __________ costs. A)fixed B)variable C)traceable common D)nontraceable common

Last Answer : D)nontraceable common

A good metallurgical coke (A) Should have high porosity (B) Should be brittle (C) Must contain moderate quantities of ash, moisture, sulphur and volatile matters (D) Should have low fusion point of its ash

Description : A good metallurgical coke (A) Should have high porosity (B) Should be brittle (C) Must contain moderate quantities of ash, moisture, sulphur and volatile matters (D) Should have low fusion point of its ash

Last Answer : (A) Should have high porosity

A good quality coal should have (A) Low fusion point of ash (B) High ash content (C) High sulphur (D) None of these

Description : A good quality coal should have (A) Low fusion point of ash (B) High ash content (C) High sulphur (D) None of these

Last Answer : (D) None of these

A good quality coal should have (A) Low fusion point of ash (B) High ash content (C) High sulphur content (D) None of these

Description : A good quality coal should have (A) Low fusion point of ash (B) High ash content (C) High sulphur content (D) None of these

Last Answer : (D) None of these

Which allotropic form of sulphur is most stable at room temperature?

Description : Which allotropic form of sulphur is most stable at room temperature?

Last Answer : Which allotropic form of sulphur is most stable at room temperature? A. Rhombic B. Monoclinic C. Plastic D. Colloidal

Which is the most stable sulphur at room temperature ?

Description : Which is the most stable sulphur at room temperature ?

Last Answer : Rhombic Sulphur

Which form of sulphur is the most stable at room temperature? (A) Plastic (B) Monoclinic (C) Rhombic (D) Flowers of sulphur

Description : Which form of sulphur is the most stable at room temperature? (A) Plastic (B) Monoclinic (C) Rhombic (D) Flowers of sulphur

Last Answer : (C) Rhombic

Explain the following , giving reason . (a) Transition metal and many of their compounds show paramagnetic behavior (b) The enthalpy of atomisation of the transition metal is high . (c) The Transition metal generally form coloured compounds .

Description : Explain the following , giving reason . (a) Transition metal and many of their compounds show paramagnetic behavior (b) The enthalpy of atomisation of the transition metal is high . (c) The Transition metal generally form coloured compounds . 

Last Answer : Ans(a) It is due to unpaired electrons . (b) It is due to strong metallic bond and additional Covalent bonds due to presence of unpaired electron in d- orbitals (c) It is due to presence of unpaired electrons ,they undergo d-d transition . 

What accounts for the formation of Boron Hydrides?

Description : What accounts for the formation of Boron Hydrides?

Last Answer : Ans. Because of small size of both B & H forms stable compound called Boron Hydrides.

Give two examples of Interstitial Hydrides.

Description : Give two examples of Interstitial Hydrides.

Last Answer : Ans-Transition metal hydrides are called Interstitial Hydrides T1 H1.8& T1H2 (non –stoichiometric hydrides)

what do you understand by “Non stoichiometric hydrides”? Do you think this type of hydrides to be formed by alkali metals? Justify your answer.

Description : what do you understand by “Non stoichiometric hydrides”? Do you think this type of hydrides to be formed by alkali metals? Justify your answer.

Last Answer : Ans: Hydrides which are deficient in hydrogen and in which the ratio of hydrogen to metal is fractional are called non-stoichiometric hydrides. This type of hydrides are formed by d-and ... they form only stoichiometric hydrides. In other words alkali metals do not form non-stoichiometric hydrides.

Give two examples of Interstitial Hydrides.

Description : Give two examples of Interstitial Hydrides.

Last Answer : Ans-Transition metal hydrides are called Interstitial Hydrides T1 H1.8& T1H2(non –stoichiometric hydrides)

What do you understand by (1) electron-deficient,(ii) electron-précise and (iii) electron precise hydrides. Provide justification with suitable examples

Description : What do you understand by (1) electron-deficient,(ii) electron-précise and (iii) electron precise hydrides. Provide justification with suitable examples

Last Answer : Ans: Electron-deficient: the hydrides which contain less than eight electron in their outmost shell are called electron- deficient for exam B2H6 Electron- precise: These hydrides contain exact number of ... nomal covalent bond and are called as electron rich hydrides. For example NH3,PH3,H2O,H2S.

Give one example of electron deficient Hydrides.

Description : Give one example of electron deficient Hydrides.

Last Answer : Ans.BH3

The reason for excessive clinker formation in gas producers is the (A) Use of coal/coke containing a high % of fines and ash (B) Use of fuel having too low an ash fusion temperature (C) Development of hot spots in the fuel bed and an abnormally high rate of gasification (D) All (A), (B) and (C)

Description : The reason for excessive clinker formation in gas producers is the (A) Use of coal/coke containing a high % of fines and ash (B) Use of fuel having too low an ash fusion temperature (C) Development of hot spots in the fuel bed and an abnormally high rate of gasification (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)