How many possible states does a binary logic circuit have? A. One B. Two C. Three D. Four

How many possible states does a binary logic circuit have? A. One B. Two C. Three D. Four
by

1 Answer

Answer :

Answer: B
by

Related questions

What type of circuit is on card 'A0AA2' at coordinate '29Q' shown in the illustration? EL-0099 A. Operational amplifier B. Digital logic inverter C. Square wave pulse generator D. Binary counter

Description : What type of circuit is on card 'A0AA2' at coordinate '29Q' shown in the illustration? EL-0099 A. Operational amplifier B. Digital logic inverter C. Square wave pulse generator D. Binary counter

Last Answer : Answer: A

The circuit shown in the illustration functions as a ____________. EL-0087 A. pulse trigger circuit for an operational amplifier B. three stage, high gain class 'A' amplifier C. binary ripple counter or shift register D. free running multivibrator

Description : The circuit shown in the illustration functions as a ____________. EL-0087 A. pulse trigger circuit for an operational amplifier B. three stage, high gain class 'A' amplifier C. binary ripple counter or shift register D. free running multivibrator

Last Answer : Answer: C

What type of logic circuit is indicated by the truth table shown in the illustration? EL-0072 A. OR B. AND C. NOR D. NAND

Description : What type of logic circuit is indicated by the truth table shown in the illustration? EL-0072 A. OR B. AND C. NOR D. NAND

Last Answer : Answer: A

In a logic circuit the NOR and NAND gate functions ____________. A. must be accomplished with a common base transistor arrangement B. are available in diode form C. are exact opposites with the same NOR and NAND inputs D. have output conditions that are exact opposites to the output condition for OR and AND, respectively

Description : In a logic circuit the NOR and NAND gate functions ____________. A. must be accomplished with a common base transistor arrangement B. are available in diode form C. are exact opposites with the ... . have output conditions that are exact opposites to the output condition for OR and AND, respectively

Last Answer : Answer: D

In a logic circuit, the NOT gate function _____________. A. does not alter a logical input B. serves to amplify a given signal level C. must be accomplished with a common collector transistor arrangement D. reverses an input logic condition

Description : In a logic circuit, the NOT gate function _____________. A. does not alter a logical input B. serves to amplify a given signal level C. must be accomplished with a common collector transistor arrangement D. reverses an input logic condition

Last Answer : Answer: D

If the outputs marked 'Q' of 'FF-A', 'FF-B' and 'FF-C' in the circuit shown in the illustration are at logic levels 0, 1, and 1 respectively, what levels are present at the 'NOT Q' outputs? EL-0087 A. 1, 0, and 1 B. 1, 0, and 0 C. 0, 0, and 1 D. 0, 1, and 1

Description : If the outputs marked 'Q' of 'FF-A', 'FF-B' and 'FF-C' in the circuit shown in the illustration are at logic levels 0, 1, and 1 respectively, what levels are present at the 'NOT Q' outputs? EL-0087 A. 1, 0, and 1 B. 1, 0, and 0 C. 0, 0, and 1 D. 0, 1, and 1

Last Answer : Answer: B

In electronic circuitry, the abbreviation 'PCB' commonly means ______________. A. pulse coded binary B. printed circuit board C. poly-coated braid D. personal computer bits

Description : In electronic circuitry, the abbreviation 'PCB' commonly means ______________. A. pulse coded binary B. printed circuit board C. poly-coated braid D. personal computer bits

Last Answer : Answer: B

What is the form of Fuzzy logic? a) Two-valued logic b) Crisp set logic c) Many-valued logic d) Binary set logic

Description : What is the form of Fuzzy logic? a) Two-valued logic b) Crisp set logic c) Many-valued logic d) Binary set logic

Last Answer : c) Many-valued logic

Fuzzy logic is a form of a) Two-valued logic b) Crisp set logic c) Many-valued logic d) Binary set logic

Description : Fuzzy logic is a form of a) Two-valued logic b) Crisp set logic c) Many-valued logic d) Binary set logic

Last Answer : c) Many-valued logic

Define binary logic?

Description : Define binary logic?

Last Answer : Binary logic consists of binary variables and logical operations. The variables are designated by the alphabets such as A, B, C, x, y, z, etc., with each variable having only two distinct values: 1 and 0. There are three basic logic operations: AND, OR, and NOT.

In the flow of one cycle of single phase AC current past any given point in a circuit, the maximum current peak occurs _____________. A. one time B. two times C. three times D. four times

Description : In the flow of one cycle of single phase AC current past any given point in a circuit, the maximum current peak occurs _____________. A. one time B. two times C. three times D. four times

Last Answer : Answer: B

How many different D.C. voltages are required to operate the circuit shown in the illustration? EL-0094 A. Two B. Three C. Four D. Five

Description : How many different D.C. voltages are required to operate the circuit shown in the illustration? EL-0094 A. Two B. Three C. Four D. Five

Last Answer : Answer: C

A full adder logic circuit will have (A) Two inputs and one output. (B) Three inputs and three outputs. (C) Two inputs and two outputs. (D) Three inputs and two outputs.

Description : A full adder logic circuit will have (A) Two inputs and one output. (B) Three inputs and three outputs. (C) Two inputs and two outputs. (D) Three inputs and two outputs.

Last Answer : Ans: D A full adder circuit will add two bits and it will also accounts the carry input generated in the previous stage. Thus three inputs and two outputs (Sum and Carry) are there.

Binary circuit elements have A) One stable state B) Two stable state C) Three stable state D) None of above

Description : Binary circuit elements have A) One stable state B) Two stable state C) Three stable state D) None of above

Last Answer : Answer : B

Binary circuit elements have a. One stable state b. Two stable state c. Three stable state d. None of above

Description : Binary circuit elements have a. One stable state b. Two stable state c. Three stable state d. None of above

Last Answer : Two stable state

Binary circuit elements have a. One stable state b. Two stable state c. Three stable state d. None of above

Description : Binary circuit elements have a. One stable state b. Two stable state c. Three stable state d. None of above

Last Answer : b. Two stable state

Binary means: a) Three b) Four c) Two d) None of The Above

Description : Binary means: a) Three b) Four c) Two d) None of The Above

Last Answer : c) Two

A micropocessor consists of: a) Arithmetic Logic Unit (ALU) b) Memories c) Input / Output devices d) All the above

Description : A micropocessor consists of: a) Arithmetic Logic Unit (ALU) b) Memories c) Input / Output devices d) All the above

Last Answer : Ans: A

Central Processing Unit (CPU) of a computer consists of: a) Control and arithmetic logic unit and primary storage b) Control, clock and ROM c) Control, clock and RAM d) Control, ALU, RAM and ROM

Description : Central Processing Unit (CPU) of a computer consists of: a) Control and arithmetic logic unit and primary storage b) Control, clock and ROM c) Control, clock and RAM d) Control, ALU, RAM and ROM

Last Answer : Ans: A

One method of troubleshooting digital circuits in a console is to ___________. A. supply alternate logic levels at the input(s) and test for change of state conditions at the output B. ground all inputs and test for a logic '1' at the output C. open all inputs and test for a logic '0' at the output D. vary each input smoothly from 0-10 volts and test for similar variance at the output

Description : One method of troubleshooting digital circuits in a console is to ___________. A. supply alternate logic levels at the input(s) and test for change of state conditions at the output B. ground all ... output D. vary each input smoothly from 0-10 volts and test for similar variance at the output

Last Answer : Answer: A

If the inputs to the diagram shown in the illustration were J=1, K=0, H=0, L=1, M=1, what logic levels would be indicated at points 'X' and 'Y' respectively? EL-0089 A. 0,0 B. 0,1 C. 1,0 D. 1,1

Description : If the inputs to the diagram shown in the illustration were J=1, K=0, H=0, L=1, M=1, what logic levels would be indicated at points 'X' and 'Y' respectively? EL-0089 A. 0,0 B. 0,1 C. 1,0 D. 1,1

Last Answer : Answer: D

If the inputs to the diagram shown in the illustration were J=1, K=1, H=0, L=1, M=1, what logic levels would be indicated at points 'X' and 'Y' respectively? EL-0089 A. 0,0 B. 0,1 C. 1,0 D. 1,1

Description : If the inputs to the diagram shown in the illustration were J=1, K=1, H=0, L=1, M=1, what logic levels would be indicated at points 'X' and 'Y' respectively? EL-0089 A. 0,0 B. 0,1 C. 1,0 D. 1,1

Last Answer : Answer: D

If the inputs to the diagram shown in the illustration were J=0, K=0, H=1, L=0, M=1, what logic levels would be indicated at points 'X' and 'Y' respectively? EL-0089 A. 0,0 B. 0,1 C. 1,0 D. 1,1

Description : If the inputs to the diagram shown in the illustration were J=0, K=0, H=1, L=0, M=1, what logic levels would be indicated at points 'X' and 'Y' respectively? EL-0089 A. 0,0 B. 0,1 C. 1,0 D. 1,1

Last Answer : Answer: C

If the inputs to the diagram shown in the illustration were J=1, K=0, H=1, L=1, M=0, what logic levels would be indicated at points 'X' and 'Y' respectively? EL-0089 A. 0,0 B. 0,1 C. 1,0 D. 1,1

Description : If the inputs to the diagram shown in the illustration were J=1, K=0, H=1, L=1, M=0, what logic levels would be indicated at points 'X' and 'Y' respectively? EL-0089 A. 0,0 B. 0,1 C. 1,0 D. 1,1

Last Answer : Answer: A

Which of the listed logic gates is considered to be a BASIC building block (basic logic gate) used in logic diagrams? A. NAND B. OR C. NOR D. All of the above.

Description : Which of the listed logic gates is considered to be a BASIC building block (basic logic gate) used in logic diagrams? A. NAND B. OR C. NOR D. All of the above.

Last Answer : Answer: B

What is the logic in lubrication oil pump system?

Description : What is the logic in lubrication oil pump system?

Last Answer : Normally main oil pump (MOP) will feed the required lub oil to turbine governor and lubrication. If the pressure drops to 5.3 kg/cm2 6.6 kV 373 kW Aux. Oil Pump will start. If further pressure falls to

What is use of 2/3 logic in our plant?

Description : What is use of 2/3 logic in our plant? 

Last Answer : All our protection instruments (system) are triplicated to have following uses. a. To increase system integrity. b. To decrease faulty trips. c. Maintenance can be done on one protective instrument without ... operates there will be no trip. This logic is used to trip the reactor in our plant. 

How many types of logic gates are there?

Description : How many types of logic gates are there?  

Last Answer : a. OR gate. b. AND gate. c. NAND gate. d. NOR gate. e. Inverter gate. f. Exclusive OR gate. g. Equivalent gate. 

One feature of the operational amplifier is that it can have ____________. A. up to ten outputs B. binary coded decimal inputs C. several hundred amps at the output D. inverting and non-inverting inputs

Description : One feature of the operational amplifier is that it can have ____________. A. up to ten outputs B. binary coded decimal inputs C. several hundred amps at the output D. inverting and non-inverting inputs

Last Answer : Answer: D

In process control terminology values which can change without distinct increments, such as temperature, pressure, or level are called ____________. A. binary values B. digital values C. bumpless values D. analog values

Description : In process control terminology values which can change without distinct increments, such as temperature, pressure, or level are called ____________. A. binary values B. digital values C. bumpless values D. analog values

Last Answer : Answer: D

In a simple DC circuit, the resistance is held constant while the applied voltage is halved. Current flow, therefore, will ______________. A. double B. remain the same C. be divided by two D. be divided by four

Description : In a simple DC circuit, the resistance is held constant while the applied voltage is halved. Current flow, therefore, will ______________. A. double B. remain the same C. be divided by two D. be divided by four

Last Answer : Answer: C

How many anodes can the 200 ampere reactor supply drive in the circuit shown in the illustration? EL-0090 A. One B. Two C. Four D. Six

Description : How many anodes can the 200 ampere reactor supply drive in the circuit shown in the illustration? EL-0090 A. One B. Two C. Four D. Six

Last Answer : Answer: C

The use of four diodes, in a full-wave bridge rectifier circuit, will __________. A. provide unidirectional current to the load B. allow a very high leakage current from the load C. convert direct current to alternating current D. offer high opposition to current in two directions

Description : The use of four diodes, in a full-wave bridge rectifier circuit, will __________. A. provide unidirectional current to the load B. allow a very high leakage current from the load C. convert direct current to alternating current D. offer high opposition to current in two directions

Last Answer : Answer: A

Four lamps are connected in parallel in a single circuit. If one of the lamp burns out, the others will _____________. A. all go out B. become dimmer C. burn with their original intensities D. become brighter

Description : Four lamps are connected in parallel in a single circuit. If one of the lamp burns out, the others will _____________. A. all go out B. become dimmer C. burn with their original intensities D. become brighter

Last Answer : Answer: C

Explain the logic circuit that is useful for interpreting mechanical language in human language ?

Description : Explain the logic circuit that is useful for interpreting mechanical language in human language ?

Last Answer : Decoder is the logic circuit that is useful for interpreting mechanical language in human language. A circuit that has a large number of inputs is called a decoder. The decoder is needed to make the information written in the code language in the output unit of the computer understandable to human.

Which control transfer passes the function viacontrol_ a Logic b. Operation ce. Circuit d. __ Allof these

Description : Which control transfer passes the function viacontrol_ a Logic b. Operation ce. Circuit d. __ Allof these

Last Answer : ce. Circuit

Design a logic circuit to convert the BCD code to Excess –

Description : Design a logic circuit to convert the BCD code to Excess –

Last Answer : code. • Truth Table for BCD to Excess – 3 conversion. • K-map simplification • Logic circuit implementing the Boolean Expression

The first widely used commercial form of Artificial Intelligence (Al) is being used in many popular products like microwave ovens, automobiles and plug in circuit boards for desktop PCs. What is name of AI? A. Boolean logic B. Human logic C. Fuzzy logic D. Functional logic

Description : The first widely used commercial form of Artificial Intelligence (Al) is being used in many popular products like microwave ovens, automobiles and plug in circuit boards for desktop PCs. What is name of AI? A. Boolean logic B. Human logic C. Fuzzy logic D. Functional logic

Last Answer : C. Fuzzy logic 

Which of the following logic operations is performed by the following given combinational circuit ? Image (A) EXCLUSIVE-OR (B) EXCLUSIVE-NOR (C) NAND (D) NOR

Description : Which of the following logic operations is performed by the following given combinational circuit ?  (A) EXCLUSIVE-OR (B) EXCLUSIVE-NOR (C) NAND (D) NOR

Last Answer : (A) EXCLUSIVE-OR

Compare combinational logic circuit and sequential logic circuit

Description : Compare combinational logic circuit and sequential logic circuit

Last Answer : Combinational logic Sequential logic The combinational logic circuit consists of logic gate only Sequential logic circuit consists of combinational logic circuit along with memory for storage of ... , multiplexer, demultiplexer etc E.g. counters, shift registers flip-flop etc

Which one of the following logic circuit has the highest speed as compared to the currently available logic

Description : Which one of the following logic circuit has the highest speed as compared to the currently available logic circuits? A) Resistance-transistor logic B) Emitter-coupled logic C) Integrated-injection logic D) Diode-transistor logic 

Last Answer : Which one of the following logic circuit has the highest speed as compared to the currently available logic circuits? A) Resistance-transistor logic B) Emitter-coupled logic C) Integrated-injection logic D) Diode-transistor logic 

A Gate is a logic circuit with one or more inputs, but only - - - output

Last Answer :  A Gate is a logic circuit with one or more inputs, but only One output

Positive logic in a logic circuit is one in which

Last Answer : Positive logic in a logic circuit is one in which logic 0 voltage level is lower than logic 1 voltage level.

Accidental grounds in a shipboard electrical system must be repaired as soon as possible as they will ____________. A. result in immediate power outages B. damage circuit breakers C. appear on the ground detection system D. damage insulation and may cause outages

Description : Accidental grounds in a shipboard electrical system must be repaired as soon as possible as they will ____________. A. result in immediate power outages B. damage circuit breakers C. appear on the ground detection system D. damage insulation and may cause outages

Last Answer : Answer: D

The winch shown in the illustration will not operate in any speed in the lowering direction and at an abnormal speed in 'first point hoist'. The possible cause is that _______________. EL-0102 A. contactor coil '3M' has many shorted turns B. resistor 'R8-A2' has an open C. contacts '1M' in the power circuit are badly corroded D. master switch contacts 'MS6' have weak springs

Description : The winch shown in the illustration will not operate in any speed in the lowering direction and at an abnormal speed in 'first point hoist'. The possible cause is that _______________. EL-0102 A. ... '1M' in the power circuit are badly corroded D. master switch contacts 'MS6' have weak springs

Last Answer : Answer: B

To limit the current flow through a DC voltmeter to as low a value as possible, the moving coil circuit is provided with a/an _____________. A. high series resistance B. high parallel resistance C. series inductor D. external shunt

Description : To limit the current flow through a DC voltmeter to as low a value as possible, the moving coil circuit is provided with a/an _____________. A. high series resistance B. high parallel resistance C. series inductor D. external shunt

Last Answer : Answer: A

Possible phase relationships between voltage and current in an alternating current circuit include which of the following conditions? A. Current and voltage may be in phase. B. Current may lead the voltage. C. Current may lag the voltage. D. All of the above.

Description : Possible phase relationships between voltage and current in an alternating current circuit include which of the following conditions? A. Current and voltage may be in phase. B. Current may lead the voltage. C. Current may lag the voltage. D. All of the above.

Last Answer : Answer: D

Which of the listed precautions should be taken when cleaning the internals of a motor with compressed air? A. Open the machine on both ends so as to allow the air and dust to escape. B. Be certain that the circuit breaker is opened and tagged on the feeder panel. C. Be certain that the air is clean and as dry as possible. D. All of the above.

Description : Which of the listed precautions should be taken when cleaning the internals of a motor with compressed air? A. Open the machine on both ends so as to allow the air and dust to escape. B. Be certain that the ... panel. C. Be certain that the air is clean and as dry as possible. D. All of the above.

Last Answer : Answer: D