Description : In IEEE 802.11, when a frame isgoingfrom one AP to another AP in a wireless distribution system, the address flag is_____ A) 00 B) 01 C) 10 D) 11
Last Answer : 11
Description : In IEEE 802.11, when a frame isgoingfrom a station to an AP, theaddress flag is _____. A) 00 B) 01 C) 10 D) 11
Last Answer : 10
Description : In IEEE 802.11, when a frame is coming from an AP and going to astation, the address flag is _______. A) 00 B) 01 C) 10 D) 11
Last Answer : 01
Description : In IEEE 802.11, when a frame isgoingfrom one station in a BSS toanother without passing through thedistribution system, the address flag is _____ A) 00 B) 01 C) 10 D) 11
Last Answer : 00
Description : What is the difference between the Ethernet frame preamble field and the IEEE 802.3 preamble and start of frame Delimiter fields? a. 1 byte b. 1 bit c. 4 bit d. 16 bit
Last Answer : a. 1 byte
Description : Which of the following standard committee specifies Bluetooth and other Personal Area Networks (PAN)? a) IEEE 802.11b b) IEEE 802.15 c) IEEE 802.11g d) IEEE 802.16
Last Answer : b) IEEE 802.15
Description : Which of the following specifies a set of media access control (MAC) and physical layer specifications for implementing WLANs? a) IEEE 802.16 b) IEEE 802.3 c) IEEE 802.11 d) IEEE 802.15
Last Answer : c) IEEE 802.11
Description : Which of the following statements is TRUE about CSMA/CD a. IEEE 802.11 wireless LAN runs CSMA/CD protocol b. Ethernet is not based on CSMA/CD protocol c. CSMA/CD is not suitable for a high propagation delay network like satellite network d. There is no contention in a CSMA/CD network
Last Answer : CSMA/CD is not suitable for a high propagation delay
Description : The x.25 standard specifies a a. technique for start-stop data b. technique for dial access c. DTE/DCE interface d. data bit rate e. none of above
Last Answer : DTE/DCE interface
Description : The Nyquist theorem specifies the minimum samplingrate to be_______. A) equal to the lowest frequency of asignal B) equal to the highest frequency ofa signal C) twice thebandwidth of a signal D) twice thehighest frequencyof a signal
Last Answer : twice thehighest frequencyof a signal
Description : Which language in WWW specifies a web's way by describing three- dimensional objects? a. HTML b. VRML c. XML d. UML
Last Answer : b. VRML
Description : Which of the following is not a characteristic of a marketing objective? A)Consistent with both business -unit and corporate strategy B)Expressed in clear, simple terms C)Written ... accurately D)Specifies a time frame for its accomplishment E)Detailed enough for marketing strategy implementation
Last Answer : E)Detailed enough for marketing strategy implementation
Description : State weather the following statement is true or false for EJB. 1. EJB exists in the middle-tier 2. EJB specifies an execution environment 3. EJB supports transaction processing A) 1-true, 2. true, 3. true B) 1- ... false, 3. true C) 1- false, 2- false, 3- false D) 1-true, 2-true, 3-false
Last Answer : A) 1-true, 2. true, 3. true
Description : The IEEE 802.11 wireless LANs use ________ types of frames. A) four B) five C) six D) none of the above
Last Answer : none of the above
Description : IEEE 802.11g, has a datarate of _____Mbps. A) 1 B) 2 C) 11 D) 22
Last Answer : 22
Description : IEEE 802.11b, has a datarate of _____Mbps. A) 1 B) 2 C) 5.5 D) none of the above
Last Answer : 5.5
Description : The original IEEE 802.11,has a data rate of _____Mbps. A) 1 B) 6 C) 11 D) 22
Last Answer : 1
Description : The IEEE 802.11g, uses _________. A) FHSS B) DSSS C) OFDM D) either (a)or (b)
Last Answer : OFDM
Description : The IEEE 802.11b, uses _________. A) FHSS B) DSSS C) OFDM D) either (a)or (b)
Last Answer : DSSS
Description : The IEEE 802.11a, uses _________. A) FHSS B) DSSS C) OFDM D) either (a)or (b)
Description : The original IEEE 802.11,uses _________. A) FHSS B) DSSS C) OFDM D) either (a)or (b)
Last Answer : either (a)or (b)
Description : . In IEEE 802.11, the addressing mechanism can include upto ______addresses. A) four B) five C) six D) none of the above
Description : In IEEE 802.11, the MAC layer framehas ______ fields. A) four B) five C) six D) none of the above
Last Answer : four
Description : In IEEE 802.11, the ______ is a timerused for collision avoidance. A) NAV B) BSS C) ESS D) none of the above
Last Answer : NAV
Description : In IEEE 802.11, the access method used in the PCF sublayer is ______. A) contention B) controlled C) polling D) none of the above
Last Answer : polling
Description : In IEEE 802.11, the access method used in the DCF sublayer is _________. A) ALOHA B) CSMA/CA C) CSMA/CD D) none of the above
Last Answer : CSMA/CA
Description : The IEEE 802.11standardfor wireless LANs defines twoservices: ______and_______. A) BSS; ASS B) ESS; SSS C) BSS; ESS D) BSS; DCF
Last Answer : BSS; ESS
Description : In IEEE 802.11, _______ isan optionalaccess method that can be implemented inan infrastructure network (not in an ad hocnetwork). A) DCF B) PCF C) either (a) or (b) D) neither (a) nor (b)
Last Answer : PCF
Description : In IEEE 802.11, astation with ________ mobility can move from one ESS toanother. A) no-transition B) BSS-transition C) ESS-transition D) none of the above
Last Answer : ESS-transition
Description : In IEEE 802.11, astation with ________mobility can move from one BSS toanother, but the movement is confined inside one ESS. A) no-transition B) BSS-transition C) ESS-transition D) none of the above
Last Answer : no-transition
Description : In IEEE 802.11, astation with ________ mobility iseither stationary (not moving) or moving only insidea BSS. A) no-transition B) BSS-transition C) ESS-transition D) none of the above
Description : . In IEEE 802.11, communication between two stations in twodifferent BSSs usually occurs viatwo ________. A) BSSs B) ESSs C) APs D) none of the above
Last Answer : APs
Description : In IEEE 802.11, a BSS with an AP is sometimes referred toas ____________. A) an ad hocarchitecture B) an infrastructurenetwork C) either (a) or (b) D) neither (a) nor (b)
Last Answer : an infrastructurenetwork
Description : In IEEE 802.11, a BSS without an AP is called an _________. A) an ad hocarchitecture B) an infrastructurenetwork C) either (a) or (b) D) neither (a) nor (b)
Last Answer : an ad hocarchitecture
Description : In IEEE 802.11, a___ is made of stationary or mobile wireless stations and anoptional central base station, known as the access point (AP). A) ESS B) BSS C) CSS D) none of the above
Last Answer : BSS
Description : IEEE hasdefined the specifications fora wireless LAN, called _______, whichcovers the physical and data link layers. A) IEEE 802.3 B) IEEE 802.5 C) IEEE 802.11 D) IEEE 802.2
Last Answer : IEEE 802.11
Description : The IEEE 802.3 Standard defines _________ CSMA/CD as the access method for first-generation 10-Mbps Ethernet. A) 1-persistent B) p-persistent C) non-persistent D) none of the above
Last Answer : 1-persistent
Description : IEEE 802.1d specification, defines _________criteria for a transparent bridges. A) two B) three C) four D) none of the above
Last Answer : three
Description : IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5, 5e or 6 cabling known as .................... a. 1000 BASE-T b. 1000 BASE-SX c. 1000 BASE-LX d. 1000 BASE-CX
Last Answer : a. 1000 BASE-T
Description : Match the following IEEE No to their corresponding Name for IEEE 802 standards for LANs. i) 802.3 a) WiFi ii) 802.11 b) WiMa iii) 802.15.1 c) Ethernet iv) 802.16 d) Bluetooth a. i-b, ii-c, iii-d, iv-a b. i-c, ii-d, iii-a, iv-b c. i-c, ii-a, iii-d, iv-b d. i-b, ii-d, iii-c, iv-a
Last Answer : c. i-c, ii-a, iii-d, iv-b
Description : Identify the non suitable medium for 802.3 ethernet? a. A thin coaxial cable b. A twisted pair cable c. A microwave link d. A fiber optical cable
Last Answer : c. A microwave link
Description : Which of the following cannot be used as a medium for 802.3 ethernet? a) A thin coaxial cable b) A twisted pair cable c) A microwave link d) A fiber optical cable
Last Answer : c) A microwave link
Description : The maximum frame length for 10-Mbps Ethernet is ________ bytes. A) 1518 B) 1500 C) 1200 D) none of the abov
Last Answer : 1518
Description : The minimum frame length for 10-Mbps Ethernet is _______bytes. A) 32 B) 80 C) 128 D) none of the above
Description : Let G(x) be the generator polynomial used for CRC checking. What is the condition that should be satisfied by G(x) to detect odd number of bits in error? a. G(x) contains more than two terms b. G(x) does ... exceeding the frame length c. 1+x is a factor of G(x) d. G(x) has an odd number of terms
Last Answer : c. 1+x is a factor of G(x)
Description : Computers cannot communicate with each other directly over telephone lines because they usedigitalpulses whereas telephone lines useanalog sound frequencies. What is the name of the device which permits digital to analog ... A. Interface B. Modem C. Attenuation D. Teleprocessor E. None of the above
Last Answer : Modem
Description : In Go-Back-N window, when the timer of the packet times out, several packets have to be resent even some may have arrived safe. Whereas in Selective Repeat window, the sender resends ___________ A ... lost B. Only those packets which are lost or corrupted C. Packet from starting D. All the packets
Last Answer : B. Only those packets which are lost or corrupted
Description : Which of the following statements is TRUE? a. Both Ethernet frame and IP packet include checksum fields b. Ethernet frame includes a checksum field and IP packet includes a CRC field c. Ethernet ... and IP packet includes a checksum field d. Both Ethernet frame and IP packet include CRC fields
Last Answer : Ethernet frame includes a CRC field and IP packet includes a checksum field
Description : In an Ethernet local area network, which one of the following statements is TRUE ? a. A station stops to sense the channel once it starts transmitting a frame. b. The purpose ... collision is detected. d. The exponential backoff mechanism reduces the probability of collision on retransmissions
Last Answer : The exponential backoff mechanism reduces the probability of collision on retransmissions
Description : ________ is a virtual-circuit wide-area network that was designed in response to demands fora new type of WAN in thelate1980s and early 1990s. A) X.25 B) Frame Relay C) ATM D) none of the above
Last Answer : Frame Relay