Compared to software, firmware is ___to write. a. Easier b. Difficult c. Mediator d. Optimum

Compared to software, firmware is ___to write.

a. Easier
b. Difficult
c. Mediator
d. Optimum
by

1 Answer

Answer :

b. Difficult
by

Related questions

Compared to hardware, firmware is _ __to design micro programmed organization: a. Difficult b. Easier c. Both a& b d. None of these

Description : Compared to hardware, firmware is _ __to design micro programmed organization: a. Difficult b. Easier c. Both a& b d. None of these

Last Answer : b. Easier

Sequence of microinstructions is termed as micro program or a. Hardware b. Software c. Firmware d. None of these

Description : Sequence of microinstructions is termed as micro program or a. Hardware b. Software c. Firmware d. None of these

Last Answer : c. Firmware

The micro program is an written in microcode and stored in firmware which is also referred as___ | a. Interpreter and control memory b. Translator and control store c. Translator and control memory d. ‘Interpreter and Translator

Description : The micro program is an written in microcode and stored in firmware which is also referred as___ | a. Interpreter and control memory b. Translator and control store c. Translator and control memory d. ‘Interpreter and Translator

Last Answer : a. Interpreter and control memory

Microcodes are stored as firmware in _ a. Memory chips b. Registers c. accumulators d. none of these

Description : Microcodes are stored as firmware in _ a. Memory chips b. Registers c. accumulators d. none of these

Last Answer : a. Memory chips

Preparing the pseudocode requires __ _time than drawing flowchart: a. Less b. More c. Optimum d. None of these

Description : Preparing the pseudocode requires __ _time than drawing flowchart: a. Less b. More c. Optimum d. None of these

Last Answer : a. Less

Which among the following print commands should be selected to print first 5 pages of document: a) Page Setup b) Print All c) From ___to ____ d) None of The Above

Description : Which among the following print commands should be selected to print first 5 pages of document: a) Page Setup b) Print All c) From ___to ____ d) None of The Above

Last Answer : c) From ___to ____

The instruction fetch operation is initiated by loading the contents of program counter into the and sends _ request to memory: a. Memory register and read b. Memory register and write c. Data register and read d. Address register and read

Description : The instruction fetch operation is initiated by loading the contents of program counter into the and sends _ request to memory: a. Memory register and read b. Memory register and write c. Data register and read d. Address register and read

Last Answer : d. Address register and read

Which operation puts memory address in memory address register and data in DR. a Memory read b. Memory write c Both d. None

Description : Which operation puts memory address in memory address register and data in DR. a Memory read b. Memory write c Both d. None

Last Answer : b. Memory write

Which 3 areas are used by cache process: a. Search, updating, invalidation b. Write, updating, invalidation c. Search, read, updating d. —_Invalidation, updating, requesting

Description : Which 3 areas are used by cache process: a. Search, updating, invalidation b. Write, updating, invalidation c. Search, read, updating d. —_Invalidation, updating, requesting

Last Answer : a. Search, updating, invalidation

Which types of register holds a single vector containing at least two read ports and one write ports: a. Data system b. Data base Cc. Memory d. Vector register

Description : Which types of register holds a single vector containing at least two read ports and one write ports: a. Data system b. Data base Cc. Memory d. Vector register

Last Answer : d. Vector register

Differences between hardware,firmware & software?

Description : Differences between hardware,firmware & software?

Last Answer : hardware-a physical device Software-programs Firmware-kinda like an operating system or structure that a device uses to function

The personnel who deals with the computer and its management put together are called A) Software B) Human ware C) Firmware D) Hardware

Description : The personnel who deals with the computer and its management put together are called A) Software B) Human ware C) Firmware D) Hardware

Last Answer : Answer : B

The programs which are as permanent as hardware and stored in ROM is known as A) Hardware B) Software C) Firmware D) ROM ware

Description : The programs which are as permanent as hardware and stored in ROM is known as A) Hardware B) Software C) Firmware D) ROM ware

Last Answer : Answer : C

Computer professionals working in a computer centre are A) Software B) Firmware C) Hardware D) Humanware

Description : Computer professionals working in a computer centre are A) Software B) Firmware C) Hardware D) Humanware

Last Answer : Answer : D

Which of the following software is also called as Closed Source Software? A. Commercial Software B. Proprietary Software C. Open Source Software D. Firmware

Description : Which of the following software is also called as Closed Source Software? A. Commercial Software B. Proprietary Software C. Open Source Software D. Firmware

Last Answer : B. Proprietary Software

____________ represents the majority of software purchased from software publishers. A. Commercial Software B. Proprietary Software C. Open Source Software D. Firmware

Description : ____________ represents the majority of software purchased from software publishers. A. Commercial Software B. Proprietary Software C. Open Source Software D. Firmware

Last Answer : A. Commercial Software

___________ is a combination of software permanently stored in the memory. A. Freeware B. Shareware C. Open Source Software D. Firmware

Description : ___________ is a combination of software permanently stored in the memory. A. Freeware B. Shareware C. Open Source Software D. Firmware

Last Answer : D. Firmware

Software can be categorized as ________ A. Firmware and Hardware B. System software and Firmware C. Application software and Hardware D. System software and Application Software

Description : Software can be categorized as ________ A. Firmware and Hardware B. System software and Firmware C. Application software and Hardware D. System software and Application Software

Last Answer : D. System software and Application Software

Software refers to ____ A. firmware B. physical components that a computer is made of C. programs D. None of the above

Description : Software refers to ____ A. firmware B. physical components that a computer is made of C. programs D. None of the above

Last Answer : C. programs

_________ is a generic term for organized collection of computer data and instructions. A. firmware B. Software C. hardware D. None of the above

Description : _________ is a generic term for organized collection of computer data and instructions. A. firmware B. Software C. hardware D. None of the above

Last Answer : B. Software

Technique of placing software/programs in a ROM semiconductor chip is called ______ A. PROM B. EPROM C. Firmware D. None of the above

Description : Technique of placing software/programs in a ROM semiconductor chip is called ______ A. PROM B. EPROM C. Firmware D. None of the above

Last Answer : C. Firmware

In Platform software, Platform includes the: a) Firmware b) Device Drivers c) Operating System and Graphical User Interface d) All of the Above e) None of These

Description : In Platform software, Platform includes the: a) Firmware b) Device Drivers c) Operating System and Graphical User Interface d) All of the Above e) None of These

Last Answer : d) All of the Above

Programs stored in ROM are called- 1) Hardware 2) Firmware 3) Software 4) None of these

Description : Programs stored in ROM are called- 1) Hardware 2) Firmware 3) Software 4) None of these

Last Answer : 2) Firmware

The programs which are as permanent as hardware and stored in ROM is known as 1) Hardware 2) Software 3) Firmware 4) Services

Description : The programs which are as permanent as hardware and stored in ROM is known as 1) Hardware 2) Software 3) Firmware 4) Services

Last Answer : 2) Software

Computer professionals working in a computer center are` a. Software b. Firmware c. Hardware d. Humanware

Description : Computer professionals working in a computer center are` a. Software b. Firmware c. Hardware d. Humanware

Last Answer : d. Humanware

The personnel who deals with the computer and its management put together are called a. Software b. Human ware c. Firmware d. Hardware

Description : The personnel who deals with the computer and its management put together are called a. Software b. Human ware c. Firmware d. Hardware

Last Answer : b. Human ware

Computer professionals working in a computer center are` a. Software b. Firmware c. Hardware d. Humanware

Description : Computer professionals working in a computer center are` a. Software b. Firmware c. Hardware d. Humanware

Last Answer : d. Humanware

The personnel who deals with the computer and its management put together are called a. Software b. Human ware c. Firmware d. Hardware

Description : The personnel who deals with the computer and its management put together are called a. Software b. Human ware c. Firmware d. Hardware

Last Answer : b. Human ware

Computer professionals working in a computer center are` a. Software b. Firmware c. Hardware d. Humanware

Description : Computer professionals working in a computer center are` a. Software b. Firmware c. Hardware d. Humanware

Last Answer : d. Humanware

The personnel who deals with the computer and its management put together are called a. Software b. Human ware c. Firmware d. Hardware

Description : The personnel who deals with the computer and its management put together are called a. Software b. Human ware c. Firmware d. Hardware

Last Answer : b. Human ware

Programs stored in a ROM are called (1) Software (2) Freeware (3) Firmware (4) None of these

Description : Programs stored in a ROM are called (1) Software (2) Freeware (3) Firmware (4) None of these

Last Answer : Firmware

A Group Ware is a (1) Hardware (2) Network (3) Software (4) Firmware

Description : A Group Ware is a (1) Hardware (2) Network (3) Software (4) Firmware

Last Answer : Software

The catalytic efficiency of two different enzymes can be compared by the (a) formation of the product (b) pH of optimum value (c) Km value (d) molecular size of the enzyme.

Description : The catalytic efficiency of two different enzymes can be compared by the (a) formation of the product (b) pH of optimum value (c) Km value (d) molecular size of the enzyme.

Last Answer : (c) Km value

The optimum performance for reactors operating in parallel is obtained when the feed stream is distributed in such a way, that the (A) Space time for each parallel line is same (B) Space time for parallel lines is different (C) Larger reactors have more space time compared to smaller ones (D) None of these

Description : The optimum performance for reactors operating in parallel is obtained when the feed stream is distributed in such a way, that the (A) Space time for each parallel line is same (B) Space time for ... is different (C) Larger reactors have more space time compared to smaller ones (D) None of these

Last Answer : (A) Space time for each parallel line is same

A stirred tank reactor compared to tubular-flow reactor provides (A) More uniform operating conditions (B) Permits operation at the optimum temperature for a long reaction time (C) Higher overall selectivity for a first order consecutive reaction (D) All (A), (B) and (C

Description : A stirred tank reactor compared to tubular-flow reactor provides (A) More uniform operating conditions (B) Permits operation at the optimum temperature for a long reaction time (C) Higher overall selectivity for a first order consecutive reaction (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

Pick up the correct statement from the following: (A) The dry density reduces by addition of water after attaining optimum moisture content (B) The line joining the peak of three moisture content graphs obtained by using three compactive energies, is called line of optimus (C) Well graded coarse grained soils can be compacted to a very high density as compared to fine grained soils (D) All the above

Description : Pick up the correct statement from the following: (A) The dry density reduces by addition of water after attaining optimum moisture content (B) The line joining the peak of three moisture content graphs ... be compacted to a very high density as compared to fine grained soils (D) All the above

Last Answer : Answer: Option D

Is Jeopardy more fun to watch if the answers are easier or more difficult?

Description : Is Jeopardy more fun to watch if the answers are easier or more difficult?

Last Answer : I like 50%. I don’t watch it regularly, but when my mom visits I watch with her every night.

As particle size is reduced (A) Screening becomes progressively more difficult (B) Screening becomes progressively easier (C) Capacity and effectiveness of the screen is increased (D) None of these

Description : As particle size is reduced (A) Screening becomes progressively more difficult (B) Screening becomes progressively easier (C) Capacity and effectiveness of the screen is increased (D) None of these

Last Answer : (A) Screening becomes progressively more difficult

Inspection of welded joints with respect to riveted joints is a. Difficult b. Easier c. Cannot say d. None

Description : Inspection of welded joints with respect to riveted joints is a. Difficult b. Easier c. Cannot say d. None

Last Answer : a. Difficult

Changes in a welded structure are a. Easier b. Difficult c. Easier & difficult d. None

Description : Changes in a welded structure are a. Easier b. Difficult c. Easier & difficult d. None

Last Answer : a. Easier

Which of the following statements is true? a. It is usually easier for the auditor to uncover irregularities than errors. b. It is usually easier for the auditor to uncover errors than irregularities. c. It is usually equally difficult for the auditor to uncover errors or irregularities. d. Usually, none of the given statements is true

Description : Which of the following statements is true? a. It is usually easier for the auditor to uncover irregularities than errors. b. It is usually easier for the auditor to uncover errors than ... the auditor to uncover errors or irregularities. d. Usually, none of the given statements is true

Last Answer : It is usually easier for the auditor to uncover errors than irregularities

Which of the following statements is true? a. It is usually equally difficult for the auditor to uncover errors or irregularities. b. It is usually easier for the auditor to uncover irregularities than errors. c. It is usually easier for the auditor to uncover errors than irregularities. d. Usually, none of the above statements is true.

Description : Which of the following statements is true? a. It is usually equally difficult for the auditor to uncover errors or irregularities. b. It is usually easier for the auditor to uncover irregularities ... auditor to uncover errors than irregularities. d. Usually, none of the above statements is true.

Last Answer : It is usually easier for the auditor to uncover errors than irregularities.

The internet facilitates globalization by: A. Making it more difficult to contact potential customers abroad. B. Cutting the cost for firms of communicating across borders. C. Making it harder to send money from one country to another. D. Making it easier for governments to censor the information received by their citizens from abroad.

Description : The internet facilitates globalization by: A. Making it more difficult to contact potential customers abroad. B. Cutting the cost for firms of communicating across borders. C. Making it harder to ... Making it easier for governments to censor the information received by their citizens from abroad.

Last Answer : Cutting the cost for firms of communicating across borders.

Higher automation leads to lower production costs and has what effect on repositioning a product on the perceptual map? a. makes it more difficult and expensive b. makes it easier and cheaper c. no effect d. eliminates repositioning

Description : Higher automation leads to lower production costs and has what effect on repositioning a product on the perceptual map? a. makes it more difficult and expensive b. makes it easier and cheaper c. no effect d. eliminates repositioning

Last Answer : a. makes it more difficult and expensive

Which of the following statements concerning the use of radiography for children is incorrect? A. techniques are the same as those used in adults B. easier because of the smallness of the child’s mouth C. made difficult by the child’s nervousness and his tendency to gag D. helpful in overcoming some of these difficulties are consideratehandling of the child, the use of small size film and the use of ultra speed

Description : Which of the following statements concerning the use of radiography for children is incorrect? A. techniques are the same as those used in adults B. easier because of the smallness of the child' ... are consideratehandling of the child, the use of small size film and the use of ultra speed

Last Answer : B. easier because of the smallness of the child’s mouth

Which of the following ideas does the writer have a problem with? (1) Some natives are proficient in discussing complex topics (2) Knowledge of English is pitched against that of Indian and Arabic literature. (3) Foreigners can read and enjoy some of the difficult English writings. (4) Learning English for an Indian can be easier than learning Greek for an Englishman

Description : Which of the following ideas does the writer have a problem with? (1) Some natives are proficient in discussing complex topics (2) Knowledge of English is pitched against that of Indian and Arabic ... writings. (4) Learning English for an Indian can be easier than learning Greek for an Englishman

Last Answer : 2) Knowledge of English is pitched against that of Indian and Arabic literature

Can you see me as a mediator?

Description : Can you see me as a mediator?

Last Answer : Not unless you get a law degree

what does a mediator mean?

Description : What does a mediator do, and what exactly does that word mean?

Last Answer : Mediator. He is in a neutral position in the dispute between the two parties, he mediates.

How do I get certification to be a mediator?

Description : How do I get certification to be a mediator?

Last Answer : This depends on the type of mediation. Here's a course you can take to get certified in labor dispute mediation, for instance: http://www.mediationworks.com/mti/ You must get ... good source for guidance is http://mediationblog.blogspot.com/2007/01/mediator-certification-getting-accurate.html.

How can I find a NJ Divorce Mediator?

Description : How can I find a NJ Divorce Mediator?

Last Answer : There is a locator for New Jersey Divorce Mediators at Divorce HQ. Select your county and you'll be linked to a list of mediators in your area. Try the New Jersey Mediation ... , 23rd Floor NYC, NY 10001 Tel :201.220.5233 email: [email protected] www.divorcewithoutdisaster.com