Higher automation leads to lower production costs and has what effect on repositioning a product on the perceptual map? a. makes it more difficult and expensive b. makes it easier and cheaper c. no effect d. eliminates repositioning

Higher automation leads to lower production costs and has what effect on repositioning a product  on the perceptual map?
a. makes it more difficult and  
expensive
b. makes it easier and cheaper
c. no effect
d. eliminates repositioning
by

1 Answer

Answer :

a. makes it more difficult and  
expensive
by

Related questions

Repositioning moves a product on the Perceptual Map from its old location to a new one. When does the new location become active? a. The day the R&D project completes b. The following year the R&D project completes c. The month the R&D project completes d. The day capacity and automation is purchased e. The day capacity is purchased

Description : Repositioning moves a product on the Perceptual Map from its old location to a new one. When does the new location become active? a. The day the R&D project completes b. The following year ... R&D project completes d. The day capacity and automation is purchased e. The day capacity is purchased

Last Answer : a. The day the R&D project completes

What is one drawback of increasing automation? a. The product requires increased time/expense for subsequent short-move repositioning. b. Operating second shift becomes more expensive. c. Automation causes large leaps in repositioning. d. Automation slows production capability. e. It requires more employees for the production line.

Description : What is one drawback of increasing automation? a. The product requires increased time/expense for subsequent short-move repositioning. b. Operating second shift becomes more expensive. c. ... d. Automation slows production capability. e. It requires more employees for the production line.

Last Answer : a. The product requires increased time/expense for subsequent short-move repositioning.

If a product’s Automation rating is substantially increased, it will: a. take longer to move the product across the Perceptual Map. b. take a shorter time to move the product across the Perceptual Map. c. not allow the product to move across the Perceptual Map. d. have no effect on the product moving across the Perceptual Map. e. other.

Description : If a product's Automation rating is substantially increased, it will: a. take longer to move the product across the Perceptual Map. b. take a shorter time to move the product across the Perceptual Map. ... Perceptual Map. d. have no effect on the product moving across the Perceptual Map. e. other.

Last Answer : a. take longer to move the product across the Perceptual Map.

Rapid movement of an existing product on the Perceptual Map requires a. reliability adjustment. b. low automation levels. c. high automation levels. d. none of the above.

Description : Rapid movement of an existing product on the Perceptual Map requires a. reliability adjustment. b. low automation levels. c. high automation levels. d. none of the above.

Last Answer : b. low automation levels.

The segments all drift to the lower-right section of the perceptual map. Why does this drift take place? a. Customers want smaller and less expensive products. b. Customers want reliable and affordable products. c. Customers want smaller and faster products. d. Customers want newer and faster products. e. None of the above.

Description : The segments all drift to the lower-right section of the perceptual map. Why does this drift take place? a. Customers want smaller and less expensive products. b. Customers want reliable and affordable ... and faster products. d. Customers want newer and faster products. e. None of the above.

Last Answer : c. Customers want smaller and faster products.

A point or some points you consider for your strategy are a. strive to give your customers the top two buying criteria. b. the perceptual map is more important as a rough cut consideration than a fine cut distinction. c. maximize the effectiveness of R&D, to achieve higher demand you must have a substantially better offer, it does not matter how good your product is if you stock out. d. all of the above.

Description : A point or some points you consider for your strategy are a. strive to give your customers the top two buying criteria. b. the perceptual map is more important as a rough cut consideration than a fine cut ... , it does not matter how good your product is if you stock out. d. all of the above.

Last Answer : d. all of the above.

What section of the perceptual map is considered ideal for the low end segment? a. Middle b. Upper Right c. Lower Right d. Upper Left e. Lower Left

Description : What section of the perceptual map is considered ideal for the low end segment? a. Middle b. Upper Right c. Lower Right d. Upper Left e. Lower Left

Last Answer : d. Upper Left

ncreasing a product’s reliability will result in which of the following changes to production costs? a. Lower material cost b. Higher material cost c. Higher labor costs d. Lower labor costs e. Reducing MTBF has no effect on costs of production

Description : ncreasing a product’s reliability will result in which of the following changes to production costs? a. Lower material cost b. Higher material cost c. Higher labor costs d. Lower labor costs e. Reducing MTBF has no effect on costs of production

Last Answer : b. Higher material cost

Investments in training leads to a __________ and _________. a. higher costs, higher turnover b. higher productivity, lower turnover c. lower productivity, lower turnover d. none of the above

Description : Investments in training leads to a __________ and _________. a. higher costs, higher turnover b. higher productivity, lower turnover c. lower productivity, lower turnover d. none of the above

Last Answer : b. higher productivity, lower turnover

What is one way to lower material costs? a. decrease MTBF b. increase capacity c. increase automation d. none of the above

Description : What is one way to lower material costs? a. decrease MTBF b. increase capacity c. increase automation d. none of the above

Last Answer : a. decrease MTBF

What is the total cost in dollars for adding 1.0 million units of capacity to a production line with an automation level of 1.0 and floor space costs per unit of $6? Assume automation costs per unit of $4. a. $26 million b. $10 million c. $2.6 million d. $1 million e. none of the above

Description : What is the total cost in dollars for adding 1.0 million units of capacity to a production line with an automation level of 1.0 and floor space costs per unit of $6? Assume automation costs per unit of $4. a. $26 million b. $10 million c. $2.6 million d. $1 million e. none of the above

Last Answer : b. $10 million

Which three factors drive labor cost? a. Production capacity b. Wage and benefit rates c. Automation levels d. Second shift/Overtime costs e. b, c, d

Description : Which three factors drive labor cost? a. Production capacity b. Wage and benefit rates c. Automation levels d. Second shift/Overtime costs e. b, c, d

Last Answer : e. b, c, d

In the Perceptual Map each segment has a set of circles where: a. The inner fine cut circles have a radius of 4 units. b. The inner fine cut circles represent the heart of the segment where demand is strong. c. At the center of each inner fine cut circle is the ideal spot where demand is strongest. d. a and b. e. a, b and c.

Description : In the Perceptual Map each segment has a set of circles where: a. The inner fine cut circles have a radius of 4 units. b. The inner fine cut circles represent the heart of the segment where demand is strong. ... cut circle is the ideal spot where demand is strongest. d. a and b. e. a, b and c.

Last Answer : b. The inner fine cut circles represent the heart of the segment where demand is strong.

The inner fine cut circles on the perceptual map have a radius of ________ units. a. 2 b. 2.5 c. 2.75 d. 1.5 e. 3

Description : The inner fine cut circles on the perceptual map have a radius of ________ units. a. 2 b. 2.5 c. 2.75 d. 1.5 e. 3

Last Answer : b. 2.5

Products must plot within ______ units from the center of the circle on the Perceptual Map to survive the rough cut. a. 3.0 b. 4.0 c. 1.0 d. 2.5

Description : Products must plot within ______ units from the center of the circle on the Perceptual Map to survive the rough cut. a. 3.0 b. 4.0 c. 1.0 d. 2.5

Last Answer : b. 4.0

Which of the following is not one of the five parts to the Situation Analysis: a. Perceptual Map. b. Demand Analysis. c. Capacity Analysis. d. Consumer Report. e. Forecasting Analysis.

Description : Which of the following is not one of the five parts to the Situation Analysis: a. Perceptual Map. b. Demand Analysis. c. Capacity Analysis. d. Consumer Report. e. Forecasting Analysis.

Last Answer : e. Forecasting Analysis.

What is a market segment? a. Group of customers with differing purchasing concerns b. Area of perceptual map where all points intersect c. Group of customers with similar purchasing concerns d. Geographic area where customers are located e. Common area of buying patterns

Description : What is a market segment? a. Group of customers with differing purchasing concerns b. Area of perceptual map where all points intersect c. Group of customers with similar purchasing concerns d. Geographic area where customers are located e. Common area of buying patterns

Last Answer : c. Group of customers with similar purchasing concerns

The customer survey score is driven by a. market share. b. price. c. 4P’s. d. price and market share. e. perceptual map, MTBF and price.

Description : The customer survey score is driven by a. market share. b. price. c. 4P’s. d. price and market share. e. perceptual map, MTBF and price.

Last Answer : c. 4P’s.

Over time, the segments will drift in which direction on the Perceptual Map? a. up; left b. up; right c. down; left d. down; right e. will remain still and constant

Description : Over time, the segments will drift in which direction on the Perceptual Map? a. up; left b. up; right c. down; left d. down; right e. will remain still and constant

Last Answer : d. down; right

The Perceptual Map is a. a marketing tool used to compare products against customer perceptions. b. a marketing tool used to compare performance against size. c. a marketing tool used to compare reliability against price. d. a marketing tool used to compare age against position. e. a marketing tool used to compare time against motion.

Description : The Perceptual Map is a. a marketing tool used to compare products against customer perceptions. b. a marketing tool used to compare performance against size. c. a marketing tool used to compare ... used to compare age against position. e. a marketing tool used to compare time against motion.

Last Answer : a. a marketing tool used to compare products against customer perceptions. b. a marketing tool used to compare performance against size.

The two characteristics that the perceptual map evaluates are a. Performance and Size. b. Performance and Price. c. Size and Price. d. Reliability and Performance. e. none of the above.

Description : The two characteristics that the perceptual map evaluates are a. Performance and Size. b. Performance and Price. c. Size and Price. d. Reliability and Performance. e. none of the above.

Last Answer : a. Performance and Size.

In the Capstone® simulation, what are the components of a product’s material cost? a. Cost of Inventory on hand and the cost to store it b. Reliability component cost and positioning component cost c. The costs associated with inventory, shipping and handling d. Level of automation and product reliability e. None of the above

Description : In the Capstone® simulation, what are the components of a product's material cost? a. Cost of Inventory on hand and the cost to store it b. Reliability component cost and positioning component ... , shipping and handling d. Level of automation and product reliability e. None of the above

Last Answer : b. Reliability component cost and positioning component cost

The automation level a. causes you to require more manpower with higher ratings. b. causes you to require more manpower with lower ratings. c. causes you to require less manpower with higher ratings. d. causes you to require less manpower with lower ratings. e. both b and c.

Description : The automation level a. causes you to require more manpower with higher ratings. b. causes you to require more manpower with lower ratings. c. causes you to require less manpower with higher ratings. d. causes you to require less manpower with lower ratings. e. both b and c.

Last Answer : e. both b and c.

R&D completion time can be diminished a. by repositioning a product. b. the more a company changes a product’s MTBF. c. when several products are put into R&D at the same time. d. when a company takes advantage of existing technology. e. none of the above.

Description : R&D completion time can be diminished a. by repositioning a product. b. the more a company changes a product’s MTBF. c. when several products are put into R&D at the same time. d. when a company takes advantage of existing technology. e. none of the above.

Last Answer : d. when a company takes advantage of existing technology.

Pricing plays a role a. when repositioning a product. b. in the rough cut stage of the purchase decision. c. in neither stage of the purchase decision. d. in the fine cut stage of the purchase decision. e. in both b and d.

Description : Pricing plays a role a. when repositioning a product. b. in the rough cut stage of the purchase decision. c. in neither stage of the purchase decision. d. in the fine cut stage of the purchase decision. e. in both b and d.

Last Answer : e. in both b and d.

What does not drive length of R&D project? a. The product's automation level on the Production line. b. The amount of money You are willing to spend on it. c. The number of R&D projects underway at the same time. d. The proximity of the product's new location to an existing product in your company's line. e. The labor strike.

Description : What does not drive length of R&D project? a. The product's automation level on the Production line. b. The amount of money You are willing to spend on it. c. The number of R&D projects underway ... of the product's new location to an existing product in your company's line. e. The labor strike.

Last Answer : The labor strike.

Labor costs are driven by three factors: a. wage and benefit rates, automation levels, and MTBF. b. wage and benefit rates, positioning, and second shift. c. wage and benefit rates, second shift, and MTBF. d. wage and benefit rates, automation levels, and second shift. e. wage and benefit rates, second shift, and material costs.

Description : Labor costs are driven by three factors: a. wage and benefit rates, automation levels, and MTBF. b. wage and benefit rates, positioning, and second shift. c. wage and benefit rates, second ... , automation levels, and second shift. e. wage and benefit rates, second shift, and material costs.

Last Answer : d. wage and benefit rates, automation levels, and second shift.

Adding one additional unit of capacity costs a. $4 x Change (difference) in Automation Level b. $6 + ($4 x Current Automation Level). c. $6 x Change (difference) in Automation Level. d. $4 + ($6 x Current Automation Level). e. none of these.

Description : Adding one additional unit of capacity costs a. $4 x Change (difference) in Automation Level b. $6 + ($4 x Current Automation Level). c. $6 x Change (difference) in Automation Level. d. $4 + ($6 x Current Automation Level). e. none of these.

Last Answer : b. $6 + ($4 x Current Automation Level).

A new unit of capacity costs $6 for the floor space plus $4 times a. hourly wage. b. automation rating. c. unit cost. d. MTBF. e. $0.65.

Description : A new unit of capacity costs $6 for the floor space plus $4 times a. hourly wage. b. automation rating. c. unit cost. d. MTBF. e. $0.65.

Last Answer : b. automation rating.

Using the R&D Spreadsheet to design your products, you have which of the following projects to choose from? a. Repositioning b. Invention c. Reliability adjustment d. All of the above e. None of the above

Description : Using the R&D Spreadsheet to design your products, you have which of the following projects to choose from? a. Repositioning b. Invention c. Reliability adjustment d. All of the above e. None of the above

Last Answer : d. All of the above

All of the following are direct implications of hiring a second shift except: a. increased production capacity. b. paying higher wages to second shift. c. training costs. d. increased MTBF. e. recruitment costs.

Description : All of the following are direct implications of hiring a second shift except: a. increased production capacity. b. paying higher wages to second shift. c. training costs. d. increased MTBF. e. recruitment costs.

Last Answer : d. increased MTBF.

Which is false about production in Capsim? a. Teams cannot produce beyond 100% capacity. b. Teams should match their production schedule to the teams sales forecast. c. There is a one year lag between purchase and use of additional production capacity. d. There is a one year lag between purchase and use of additional production automation. e. All of the above are true.

Description : Which is false about production in Capsim? a. Teams cannot produce beyond 100% capacity. b. Teams should match their production schedule to the teams sales forecast. c. There is a one year lag ... year lag between purchase and use of additional production automation. e. All of the above are true.

Last Answer : a. Teams cannot produce beyond 100% capacity.

Lowering the automation level will result in a. receiving a cash payment of $4 per unit of capacity. b. a tax credit. c. a charge. d. immediate changes to production lines. e. none of the above.

Description : Lowering the automation level will result in a. receiving a cash payment of $4 per unit of capacity. b. a tax credit. c. a charge. d. immediate changes to production lines. e. none of the above.

Last Answer : c. a charge.

If you sell off a production line (capacity and automation), the amount of cash that the company will receive will be a. 65% of the original cost. b. average cost of production for the previous year (market price). c. 50% of the book value. d. 50% of the acquisition cost. e. 65% of the book value.

Description : If you sell off a production line (capacity and automation), the amount of cash that the company will receive will be a. 65% of the original cost. b. average cost of production for the previous year (market ... . 50% of the book value. d. 50% of the acquisition cost. e. 65% of the book value.

Last Answer : a. 65% of the original cost.

If you reduce automation in the production component of Marketing, you will: a. slow down R&D designs. b. incur a retooling cost. c. lose the game. d. none of the above.

Description : If you reduce automation in the production component of Marketing, you will: a. slow down R&D designs. b. incur a retooling cost. c. lose the game. d. none of the above.

Last Answer : b. incur a retooling cost.

If you purchase production capacity and automation: a. it is available immediately. b. it is available in 6 months. c. it is available in the next year. d. it is available when you need it. e. none of the above.

Description : If you purchase production capacity and automation: a. it is available immediately. b. it is available in 6 months. c. it is available in the next year. d. it is available when you need it. e. none of the above.

Last Answer : c. it is available in the next year.

Which statement is true? a. Increasing in capacity and changes in automation can take less than a year to implement if the product already exists. Sales of capacity take a full year to implement. b. Increases in capacity and changes in automation take a full year to implement. Sales of capacity are immediate. c. Increases in capacity, changes in automation and sales of capacity take a full year to implement. d. Increases in capacity, changes in automation and sales of capacity take less than a year to implement if the product already exists.

Description : Which statement is true? a. Increasing in capacity and changes in automation can take less than a year to implement if the product already exists. Sales of capacity take a full year to implement ... automation and sales of capacity take less than a year to implement if the product already exists.

Last Answer : b. Increases in capacity and changes in automation take a full year to implement. Sales of capacity are immediate.

How can the R&D cycle time be reduced? a. Increasing automation levels b. Budgeting money to quality initiatives c. Increasing R&D budget d. Decreasing product portfolio e. Decreasing capacity

Description : How can the R&D cycle time be reduced? a. Increasing automation levels b. Budgeting money to quality initiatives c. Increasing R&D budget d. Decreasing product portfolio e. Decreasing capacity

Last Answer : b. Budgeting money to quality initiatives

If your team decides to introduce a new product, when should capacity and automation be purchased? a. Two rounds prior to product release b. One round prior to product release c. The round of product release d. The round after product release e. Purchase of capacity and automation is not necessary for new product release

Description : If your team decides to introduce a new product, when should capacity and automation be purchased? a. Two rounds prior to product release b. One round prior to product release c. The ... round after product release e. Purchase of capacity and automation is not necessary for new product release

Last Answer : b. One round prior to product release

Which Automation rating requires the longest time to reposition a product? a. 1 b. 3 c. 7 d. 9 e. 10

Description : Which Automation rating requires the longest time to reposition a product? a. 1 b. 3 c. 7 d. 9 e. 10

Last Answer : e. 10

R&D completion time depends on a. number of projects in R&D. b. automation rating. c. similarity to existing products. d. size of the product. e. a, b, and c.

Description : R&D completion time depends on a. number of projects in R&D. b. automation rating. c. similarity to existing products. d. size of the product. e. a, b, and c.

Last Answer : e. a, b, and c.

What are the drivers of Material Costs? a. Higher performance b. Smaller size c. Higher Mean Time Between Failure (MTBF) d. All of the above e. None of the above

Description : What are the drivers of Material Costs? a. Higher performance b. Smaller size c. Higher Mean Time Between Failure (MTBF) d. All of the above e. None of the above

Last Answer : d. All of the above

When going to a new automation level a. there is a 1 year lag. b. there is a lag dependent on the amount the automation level has been changed. c. there is no lag. d. the lag is dependent on the cost. e. none of the above.

Description : When going to a new automation level a. there is a 1 year lag. b. there is a lag dependent on the amount the automation level has been changed. c. there is no lag. d. the lag is dependent on the cost. e. none of the above.

Last Answer : a. there is a 1 year lag.

As a general rule, stock issues are used to: a. Protect you from getting a loan from Big Al. b. Fund the purchase of more market share. c. Fund long term investments in capacity and automation. d. Fund yearly sales and promotional budgets. e. All of the above.

Description : As a general rule, stock issues are used to: a. Protect you from getting a loan from Big Al. b. Fund the purchase of more market share. c. Fund long term investments in capacity and automation. d. Fund yearly sales and promotional budgets. e. All of the above.

Last Answer : c. Fund long term investments in capacity and automation.

Looking at the production, if the potential bar is higher than the actual one, a. the company should spend more budget in sales. b. the company over produced and missed sales opportunities. c. the company produced the right amount and missed no sales opportunities. d. the company under produced and missed sales opportunities. e. the company should spend more budget in marketing.

Description : Looking at the production, if the potential bar is higher than the actual one, a. the company should spend more budget in sales. b. the company over produced and missed sales ... company under produced and missed sales opportunities. e. the company should spend more budget in marketing.

Last Answer : d. the company under produced and missed sales opportunities.

At the start of the simulation, all assembly lines have an automation level between: a. 2.0 and 4.0. b. 3.0 and 5.0. c. 4.0 and 6.0. d. 5.0 and 7.0. e. 6.0 and 8.0.

Description : At the start of the simulation, all assembly lines have an automation level between: a. 2.0 and 4.0. b. 3.0 and 5.0. c. 4.0 and 6.0. d. 5.0 and 7.0. e. 6.0 and 8.0.

Last Answer : b. 3.0 and 5.0.

The cost to increase automation to 8.0 is equal to a. First Shift Capacity X [$8 X (4 – Automation Level). b. First Shift Capacity X [$8 X (4 + Automation Level). c. First Shift Capacity X [$4 X (8 – Automation Level). d. First Shift Capacity X [$4 X (8 + Automation Level). e. First Shift Capacity X [$4 X (4 – Automation Level)

Description : The cost to increase automation to 8.0 is equal to a. First Shift Capacity X [$8 X (4 - Automation Level). b. First Shift Capacity X [$8 X (4 + Automation Level). c. First Shift Capacity X [$4 X ... Capacity X [$4 X (8 + Automation Level). e. First Shift Capacity X [$4 X (4 - Automation Level)

Last Answer : c. First Shift Capacity X [$4 X (8 – Automation Level).

Automation levels are given on a scale of _____ to _____. a. 0.0; 5.0 b. 1.0; 5.0 c. 0.0; 10.0 d. 1.0; 10.0 e. 5.0; 10.0

Description : Automation levels are given on a scale of _____ to _____. a. 0.0; 5.0 b. 1.0; 5.0 c. 0.0; 10.0 d. 1.0; 10.0 e. 5.0; 10.0

Last Answer : d. 1.0; 10.0

When purchasing increased Capacity and Automation, the new capacity becomes available a. immediately. b. in 1 year. c. in 6 months. d. in 2 years. e. none of these.

Description : When purchasing increased Capacity and Automation, the new capacity becomes available a. immediately. b. in 1 year. c. in 6 months. d. in 2 years. e. none of these.

Last Answer : b. in 1 year.

There is ______ lag in buying new Capacity and ______ lag in changing Automation. a. 0; 0 b. 1 year; 0 c. 0; 1 year d. 1 year; 1 year e. ½ year; ½ year

Description : There is ______ lag in buying new Capacity and ______ lag in changing Automation. a. 0; 0 b. 1 year; 0 c. 0; 1 year d. 1 year; 1 year e. ½ year; ½ year

Last Answer : d. 1 year; 1 year