A is written as separate unit, apart from main and called whenever necessary: a. Subroutine b. Code c. Block d. None of these

A is written as separate unit, apart from main and called whenever necessary:

a. Subroutine
b. Code
c. Block
d. None of these
by

1 Answer

Answer :

a. Subroutine
by

Related questions

Return instruction is written in_ to written to main program: a. Subroutine b. Main program c. Botha &b d. None of these

Description : Return instruction is written in_ to written to main program: a. Subroutine b. Main program c. Botha &b d. None of these

Last Answer : a. Subroutine

When subroutine is called contents of program counter is location address of __ instruction following call instruction is stored on _ __and program execution is transferred to __ address. a. Non executable, pointer and subroutine b. Executable, Stack and Main program Cc. Executable, Queue and Subroutine d. Executable, Stack and Subroutine

Description : When subroutine is called contents of program counter is location address of __ instruction following call instruction is stored on _ __and program execution is transferred to __ address. a. Non ... , Stack and Main program Cc. Executable, Queue and Subroutine d. Executable, Stack and Subroutine

Last Answer : d. Executable, Stack and Subroutine

If internal subroutine is called global data is used to pass values defining parameters between __ program and defined | a. Main and subroutine b. Local and subroutine c. Global and subroutine d. Global and main

Description : If internal subroutine is called global data is used to pass values defining parameters between __ program and defined | a. Main and subroutine b. Local and subroutine c. Global and subroutine d. Global and main

Last Answer : a. Main and subroutine

A subroutine called by another subroutine is called: a. Nested b. For loop c. Break d. Continue

Description : A subroutine called by another subroutine is called: a. Nested b. For loop c. Break d. Continue

Last Answer : a. Nested

Subroutine is called _ a. In Same program b. Inexternal program co Botha&b d. None of these

Description : Subroutine is called _ a. In Same program b. Inexternal program co Botha&b d. None of these

Last Answer : co Botha&b

It contains the stack for PC storage during subroutine calls and input/output interrupt services: a. Seven- level hardware b. Eight- level hardware

Description : It contains the stack for PC storage during subroutine calls and input/output interrupt services: a. Seven- level hardware b. Eight- level hardware

Last Answer : b. Eight- level hardware

___uses the stack to store return address of subroutine: a. CPU b. Microprocessor c. register d. memory

Description : ___uses the stack to store return address of subroutine: a. CPU b. Microprocessor c. register d. memory

Last Answer : b. Microprocessor

The extent nesting in subroutine is limited only by: a. Number of available Stack locations b. Number of available Addressing locations c. Number of available CPU locations d. Number of available Memory locations

Description : The extent nesting in subroutine is limited only by: a. Number of available Stack locations b. Number of available Addressing locations c. Number of available CPU locations d. Number of available Memory locations

Last Answer : a. Number of available Stack locations

Markers in subroutine cannot be accepted as limits whereas this markers stands for: a. Top of stack b. Bottom of stack c. Middle of stack d. Allof these

Description : Markers in subroutine cannot be accepted as limits whereas this markers stands for: a. Top of stack b. Bottom of stack c. Middle of stack d. Allof these

Last Answer : a. Top of stack

subroutine declaration come after procedure announcement: a. Global b. Local c. Botha &b d. None of these

Description : subroutine declaration come after procedure announcement: a. Global b. Local c. Botha &b d. None of these

Last Answer : a. Global

subroutines are invoked by using their___ _ ina subroutine call statement and replacing formal parameters with__ __ parameters: a. Identifier and formal b. Identifier and actual c. Expression and arguments d. None of these

Description : subroutines are invoked by using their___ _ ina subroutine call statement and replacing formal parameters with__ __ parameters: a. Identifier and formal b. Identifier and actual c. Expression and arguments d. None of these

Last Answer : b. Identifier and actual

Callis_ subroutine call. a. Conditional b. Unconditi c. Botha &b d. None of these

Description : Callis_ subroutine call. a. Conditional b. Unconditi c. Botha &b d. None of these

Last Answer : b. Unconditi

When a subroutine is the parameters are loaded onto the stack and SCAL is executed: a. Executed b. Invoked c. Ended d. = Started

Description : When a subroutine is the parameters are loaded onto the stack and SCAL is executed: a. Executed b. Invoked c. Ended d. = Started

Last Answer : b. Invoked

Which is the common program control instructions are. a Branch b. Jump c Call a subroutine d. Return e. Allof these f None of these

Description : Which is the common program control instructions are. a Branch b. Jump c Call a subroutine d. Return e. Allof these f None of these

Last Answer : e. Allof these

A CPU handles interrupt by executing interrupt service subroutine................. (A) by checking interrupt register after execution of each instruction (B) by checking interrupt register at the end of the fetch cycle (C) whenever an interrupt is registered (D) by checking interrupt register at regular time interval

Description : A CPU handles interrupt by executing interrupt service subroutine................. (A) by checking interrupt register after execution of each instruction (B) by checking interrupt register ... cycle (C) whenever an interrupt is registered (D) by checking interrupt register at regular time interval

Last Answer : (A) by checking interrupt register after execution of each instruction

In 8085, whenever a signal is received at TRAP terminal, its program execution is transferred to a subroutine

Description : In 8085, whenever a signal is received at TRAP terminal, its program execution is transferred to a subroutine on address A) 0000 H B) 002C H C) 0024 H D) 0004 H

Last Answer : In 8085, whenever a signal is received at TRAP terminal, its program execution is transferred to a subroutine on address 0024 H

Which unit is necessary for the execution of instruction: a. Timing b. Control ce. Both d. None of these

Description : Which unit is necessary for the execution of instruction: a. Timing b. Control ce. Both d. None of these

Last Answer : ce. Both

Call instruction is written inthe ss program. a. Main b. Procedures c. Program d. Memory

Description : Call instruction is written inthe ss program. a. Main b. Procedures c. Program d. Memory

Last Answer : a. Main

Whenever, owing to the unusual bulk mail for an office extra transit bags are closed a) The word ‘extra bag’ should be written on the label b) The number of extra transit bags closed should be entered in the mail list c) Each extra transit bag closed should contain its separate mail list showing the particulars of bags enclosed d) All the above

Description : Whenever, owing to the unusual bulk mail for an office extra transit bags are closed a) The word extra bag' should be written on the label b) The number of extra transit bags closed ... bag closed should contain its separate mail list showing the particulars of bags enclosed d) All the above

Last Answer : d) All the above

___is the statement block of for loop lies inside block of another for loop: a. Nested for loop b. Nested while loop c. Nested do-while loop d. None of these

Description : ___is the statement block of for loop lies inside block of another for loop: a. Nested for loop b. Nested while loop c. Nested do-while loop d. None of these

Last Answer : a. Nested for loop

statement block is executed atleast once for any value of the condition. a. For statement b. Do-while statement c. While statement d. None of these

Description : statement block is executed atleast once for any value of the condition. a. For statement b. Do-while statement c. While statement d. None of these

Last Answer : b. Do-while statement

The continue statement is used to transfer the control to the_ ___ of astatement block in a loop. a. End b. Beginning c. Middle d. None of these

Description : The continue statement is used to transfer the control to the_ ___ of astatement block in a loop. a. End b. Beginning c. Middle d. None of these

Last Answer : b. Beginning

The statement is used to transfer the control to the end of statement block in a loop. a. Continue b. Break c. Switch d. Goto

Description : The statement is used to transfer the control to the end of statement block in a loop. a. Continue b. Break c. Switch d. Goto

Last Answer : b. Break

is a small program tested separately before combining with final program: a Module b. Block c. selection d. none of these

Description : is a small program tested separately before combining with final program: a Module b. Block c. selection d. none of these

Last Answer : a Module

In RISC architecture access to registers is made as a block and register file in a particular register can be selected by using: a. Multiplexer b. Decoder c. Subtractor d. Adder

Description : In RISC architecture access to registers is made as a block and register file in a particular register can be selected by using: a. Multiplexer b. Decoder c. Subtractor d. Adder

Last Answer : b. Decoder

Which operation is used to shift the content of an operand to one or more bits to provide necessary variation: a. Logical and bit manipulation b. Shift manipulation c. Circular manipulation d. None of these

Description : Which operation is used to shift the content of an operand to one or more bits to provide necessary variation: a. Logical and bit manipulation b. Shift manipulation c. Circular manipulation d. None of these

Last Answer : b. Shift manipulation

ACALL instruction allows specifying ______address in the instruction and calling subroutine within ______ program memory block. a) 2byte, 3K b) 11bit, 2K c) 9bit, 2K d) 1byte, 3K

Description : ACALL instruction allows specifying ______address in the instruction and calling subroutine within ______ program memory block. a) 2byte, 3K b) 11bit, 2K c) 9bit, 2K d) 1byte, 3K

Last Answer : c) 9bit, 2K

____are marked or written down: a. Number system b. Number words © Number symbols d. Number gestures

Description : ____are marked or written down: a. Number system b. Number words © Number symbols d. Number gestures

Last Answer : © Number symbols

CP/CMS assembly language was written in ___assembler. a. $/340 b. S-350 c. $/320 d. 5/860

Description : CP/CMS assembly language was written in ___assembler. a. $/340 b. S-350 c. $/320 d. 5/860

Last Answer : d. 5/860

How many structures structured programs are written: a 38 b Z c. 1 d 6

Description : How many structures structured programs are written: a 38 b Z c. 1 d 6

Last Answer : a 38

following are structured programs written in simple structures. a Sequence b. Selection c. Iteration d. All of these

Description : following are structured programs written in simple structures. a Sequence b. Selection c. Iteration d. All of these

Last Answer : d. All of these

The micro program is an written in microcode and stored in firmware which is also referred as___ | a. Interpreter and control memory b. Translator and control store c. Translator and control memory d. ‘Interpreter and Translator

Description : The micro program is an written in microcode and stored in firmware which is also referred as___ | a. Interpreter and control memory b. Translator and control store c. Translator and control memory d. ‘Interpreter and Translator

Last Answer : a. Interpreter and control memory

Which register holds the item that is to be written into the stack or read out of the stack: a. SR b. IR Cc. RR d DR

Description : Which register holds the item that is to be written into the stack or read out of the stack: a. SR b. IR Cc. RR d DR

Last Answer : d DR

hich section is the remaining part of a process’s code: a. Racing section b. Critical section Cc. Entry section d. Reminder secti

Description : hich section is the remaining part of a process’s code: a. Racing section b. Critical section Cc. Entry section d. Reminder secti

Last Answer : b. Entry section

Which are the types of binary codes number: a. Sign magnitude b. —_1’s complement code c. 2’s complement code d. __ Allof these

Description : Which are the types of binary codes number: a. Sign magnitude b. —_1’s complement code c. 2’s complement code d. __ Allof these

Last Answer : c. 2’s complement code

isacommand given to a computer to perform a specified operation on some given data. a. Aninstruction b. Command c. Code d. None of these

Description : isacommand given to a computer to perform a specified operation on some given data. a. Aninstruction b. Command c. Code d. None of these

Last Answer : a. Aninstruction

The complete set of op-codes for a particular microprocessor defines the_ set for that processor: a. Code b. Function c. Module d. Instruction

Description : The complete set of op-codes for a particular microprocessor defines the_ set for that processor: a. Code b. Function c. Module d. Instruction

Last Answer : d. Instruction

is a symbolic representation of discrete elements of information: a. Data b. Code c. Address d. Control

Description : is a symbolic representation of discrete elements of information: a. Data b. Code c. Address d. Control

Last Answer : b. Code

Group of binary bits(0&1) is known as: a. Binary code b. Digit code

Description : Group of binary bits(0&1) is known as: a. Binary code b. Digit code

Last Answer : a. Binary code

Abbreviation ASCII stands for: a. American standard code for information interchange b. Abbreviation standard code for information interchange c. Both d. None of these

Description : Abbreviation ASCII stands for: a. American standard code for information interchange b. Abbreviation standard code for information interchange c. Both d. None of these

Last Answer : a. American standard code for information interchange

Which code used in transferring coded information from keyboards and to computer display and printers: a. ASCII b. EBCDIC c. Both d. None of these

Description : Which code used in transferring coded information from keyboards and to computer display and printers: a. ASCII b. EBCDIC c. Both d. None of these

Last Answer : a. ASCII

Which code used to represent numbers, letters, punctuation marks as well as control characters: a. ASCII b. EBCDIC c. Both d. None of these

Description : Which code used to represent numbers, letters, punctuation marks as well as control characters: a. ASCII b. EBCDIC c. Both d. None of these

Last Answer : a. ASCII

abbreviation EBCDIC stand for: a. Extended binary coded decimal interchange code b. External binary coded decimal interchange code c. Extra binary coded decimal interchange code d. None of these

Description : abbreviation EBCDIC stand for: a. Extended binary coded decimal interchange code b. External binary coded decimal interchange code c. Extra binary coded decimal interchange code d. None of these

Last Answer : a. Extended binary coded decimal interchange code

Which code the decimal digits are represented by the 8421 BCD code preceded by 1111: a. ASCII b. EBCDIC c. Both d. None of these

Description : Which code the decimal digits are represented by the 8421 BCD code preceded by 1111: a. ASCII b. EBCDIC c. Both d. None of these

Last Answer : b. EBCDIC

has the property that corrupting or garbling a code word will likely produce a bit string that is not a code word: a. Error deleting codes b. Error detecting codes c. Error string codes

Description : has the property that corrupting or garbling a code word will likely produce a bit string that is not a code word: a. Error deleting codes b. Error detecting codes c. Error string codes

Last Answer : b. Error detecting codes

A code that is used to correct error is calledan a. Error detecting code b. Error correcting code c. Both d. None of these

Description : A code that is used to correct error is calledan a. Error detecting code b. Error correcting code c. Both d. None of these

Last Answer : b. Error correcting code

The bit positionina can be numbered from 1 through 2h, a. Hamming code word b. Hamming distance word c. Both d. None of these

Description : The bit positionina can be numbered from 1 through 2h, a. Hamming code word b. Hamming distance word c. Both d. None of these

Last Answer : a. Hamming code word

Each check bit is grouped with the information bits as specified by a__ a. Parity check code b. Parity check matrix c. Parity check bit d. All of these

Description : Each check bit is grouped with the information bits as specified by a__ a. Parity check code b. Parity check matrix c. Parity check bit d. All of these

Last Answer : b. Parity check matrix

Which are designed to interpret a specified number of instruction code. a. Programmer b. Processors c. Instruction d. Opcode

Description : Which are designed to interpret a specified number of instruction code. a. Programmer b. Processors c. Instruction d. Opcode

Last Answer : b. Processors