When parts of a vibrating system slide on a dry surface, the damping is A. Viscous. B. Coulomb C. Structural D. Eddy current

When parts of a vibrating system slide on a dry surface, the damping is
A. Viscous.
B. Coulomb
C. Structural
D. Eddy current
by

1 Answer

Answer :

B. Coulomb
by

Related questions

Eddy current damping is an example of _____ A Coulomb damping B Hysteresis damping C Viscous damping D Dry friction damping

Description : Eddy current damping is an example of _____ A Coulomb damping B Hysteresis damping C Viscous damping D Dry friction damping

Last Answer : C Viscous damping

Eddy current damping is an example of _____A. Coulomb damping B. Hysteresis damping C. Viscous damping D. Dry friction damping

Description : Eddy current damping is an example of _____A. Coulomb damping B. Hysteresis damping C. Viscous damping D. Dry friction damping

Last Answer : C. Viscous damping

Eddy current damping is an example of _____ A) Coulomb damping B) Hysteresis damping C) Viscous damping D) Dry friction damping

Description : Eddy current damping is an example of _____ A) Coulomb damping B) Hysteresis damping C) Viscous damping D) Dry friction damping

Last Answer : C) Viscous damping

Eddy current damping is an example of _____ a. Coulomb damping b. Hysteresis damping c. Viscous damping d. Dry friction damping

Description : Eddy current damping is an example of _____ a. Coulomb damping b. Hysteresis damping c. Viscous damping d. Dry friction damping

Last Answer : c. Viscous damping

Which of the following statements is/are true for coulomb damping? 1. Coulomb damping occurs due to friction between two lubricated surfaces2. Damping force is opposite to the direction of motion of vibrating body 3. For smooth surfaces, coefficient of friction depends upon velocity 4. Damping force depends upon the rubbing velocity between two rubbing surfaces a. Only statement 1 b. Statement 2, 3 and statement 4 c. Only statement 2 d. All the above statements are true

Description : Which of the following statements is/are true for coulomb damping? 1. Coulomb damping occurs due to friction between two lubricated surfaces2. Damping force is opposite to the direction of motion of vibrating body ... 2, 3 and statement 4 c. Only statement 2 d. All the above statements are true

Last Answer : c. Only statement 2

When a system vibrates in a fluid medium, the damping is (a) viscous (b) Coulomb (c) solid

Description : When a system vibrates in a fluid medium, the damping is (a) viscous (b) Coulomb (c) solid

Last Answer : (a) viscous

The equation of motion for a vibrating system with viscous damping is d 2 x/dt 2 + c/m X dx/dt + s/m X x = 0 If the roots of this equation are real, then the system will be A. over damped B. under damped C. critically damped D. none of the mentioned

Description : The equation of motion for a vibrating system with viscous damping is d 2 x/dt 2 + c/m X dx/dt + s/m X x = 0 If the roots of this equation are real, then the system will be A. over damped B. under damped C. critically damped D. none of the mentioned

Last Answer : A. over damped

The equation of motion for a vibrating system with viscous damping is d 2 x/dt 2 + c/m X dx/dt + k/m X x = 0 If the roots of this equation are real, then the system will be a) over damped b) under damped c) critically damped d) none of the mentioned Ans:a

Description : The equation of motion for a vibrating system with viscous damping is d 2 x/dt 2 + c/m X dx/dt + k/m X x = 0 If the roots of this equation are real, then the system will be a) over damped b) under damped c) critically damped d) none of the mentioned Ans:a

Last Answer : a) over damped

The equivalent viscous damping coefficient Ceq for coulomb damping is given by A) 4F/πωx B) 4πF/ωx C) πωx/4F D) ωx/4Πf

Description : The equivalent viscous damping coefficient Ceq for coulomb damping is given by A) 4F/πωx B) 4πF/ωx C) πωx/4F D) ωx/4Πf

Last Answer : A) 4F/πωx

Following are the types of damping A. Viscous Damping B. Coulomb Damping C. Hysteresis Damping D. All the above

Description : Following are the types of damping A. Viscous Damping B. Coulomb Damping C. Hysteresis Damping D. All the above

Last Answer : D. All the above

A vibrating system having mass 1kg, a spring of stiffness 1000N/m and damping factor of 0.632 and it is put to harmonic excitation of 10N. Find the amplitude at resonance. A 0.079 B 7.9C 0.056 D 0.00791

Description : A vibrating system having mass 1kg, a spring of stiffness 1000N/m and damping factor of 0.632 and it is put to harmonic excitation of 10N. Find the amplitude at resonance. A 0.079 B 7.9C 0.056 D 0.00791

Last Answer : D 0.00791

Calculate the value of critical damping coefficient if a vibrating system has mass of 4kg and stiffness of 100N/m A 20 N-sec/m B 40 N-sec/m C 60 N-sec/m D 80 N-sec/m

Description : Calculate the value of critical damping coefficient if a vibrating system has mass of 4kg and stiffness of 100N/m A 20 N-sec/m B 40 N-sec/m C 60 N-sec/m D 80 N-sec/m

Last Answer : B 40 N-sec/m

A system is said to be critically damped if the damping factor for a vibrating system is A Zero B Less than one C One D More than one

Description : A system is said to be critically damped if the damping factor for a vibrating system is A Zero B Less than one C One D More than one

Last Answer : C One

If the damping factor for a vibrating system is unity, then the system will be (A) overdamped (B) underdamped (C) critically damped (D) without vibrations

Description : If the damping factor for a vibrating system is unity, then the system will be (A) overdamped (B) underdamped (C) critically damped (D) without vibrations

Last Answer : (C) critically damped

In coulomb damping the frequency of damped vibrations is A Equal to that of undamped vibrations B Less than that of undamped vibrationsC More than that of undamped vibrations D Independent of the frequency of undamped vibration

Description : In coulomb damping the frequency of damped vibrations is A Equal to that of undamped vibrations B Less than that of undamped vibrationsC More than that of undamped vibrations D Independent of the frequency of undamped vibration

Last Answer : A Equal to that of undamped vibrations

In coulomb damping, the amplitude of motion in each cycle is reduced by A. F/K B. 2F/K C. 4F/K D. F/4K

Description : In coulomb damping, the amplitude of motion in each cycle is reduced by A. F/K B. 2F/K C. 4F/K D. F/4K

Last Answer : C. 4F/K

The advantage of critical damping is A. That vibrating body come to rest in smallest possible time B. There is no vibration C. That amplitude of vibration is maximum D. The amplitude of vibration is minimum

Description : The advantage of critical damping is A. That vibrating body come to rest in smallest possible time B. There is no vibration C. That amplitude of vibration is maximum D. The amplitude of vibration is minimum

Last Answer : A. That vibrating body come to rest in smallest possible time

A simple pendulum is found to vibrate at a frequency of 0.5Hz in vacuum and0.45 Hz in a viscous fluid medium. Find the damping factor. 0.5122 (B) 0.9272 (C) 0.4359 (D) 0.2568

Description : A simple pendulum is found to vibrate at a frequency of 0.5Hz in vacuum and0.45 Hz in a viscous fluid medium. Find the damping factor. 0.5122 (B) 0.9272 (C) 0.4359 (D) 0.2568

Last Answer : (C) 0.4359

A simple pendulum is found to vibrate at a frequency of 0.5Hz in vacuum and 0.45Hz in a viscous fluid medium. Find the damping factor. A 0.5122 B 0.9237 C 0.4359 D 0.2568

Description : A simple pendulum is found to vibrate at a frequency of 0.5Hz in vacuum and 0.45Hz in a viscous fluid medium. Find the damping factor. A 0.5122 B 0.9237 C 0.4359 D 0.2568

Last Answer : C 0.4359

Determine the viscous damping coefficient if damper offers resistance 0.05N at constant velocity 0.04m/sec A 0.8N-sec/m B 1.5N-sec/m C 2.5N-sec/m D 1.25N-sec/m

Description : Determine the viscous damping coefficient if damper offers resistance 0.05N at constant velocity 0.04m/sec A 0.8N-sec/m B 1.5N-sec/m C 2.5N-sec/m D 1.25N-sec/m

Last Answer : D 1.25N-sec/m

The unit of the viscous damping coefficient is A N-m/sec B m/N-sec C N-sec-m D N-sec/m

Description : The unit of the viscous damping coefficient is A N-m/sec B m/N-sec C N-sec-m D N-sec/m

Last Answer : D N-sec/m

Which of the following relations is true for viscous damping? A) Force α relative displacement B) Force α relative velocity C) Force α (1 / relative velocity) D) None of the above

Description : Which of the following relations is true for viscous damping? A) Force α relative displacement B) Force α relative velocity C) Force α (1 / relative velocity) D) None of the above

Last Answer : B) Force α relative velocity

In case of viscous damping the frequency of damped vibration is A) Equal to that of undamped vibrations B) Less than that of undamped vibrations C) Greater than that of undamped vibrations D) Independent than that of undamped vibrations

Description : In case of viscous damping the frequency of damped vibration is A) Equal to that of undamped vibrations B) Less than that of undamped vibrations C) Greater than that of undamped vibrations D) Independent than that of undamped vibrations

Last Answer : B) Less than that of undamped vibrations

The units of viscous damping coefficient is A) N-m/sec B) m/N-sec C) N-sec/m D) N-m-sec

Description : The units of viscous damping coefficient is A) N-m/sec B) m/N-sec C) N-sec/m D) N-m-sec

Last Answer : C) N-sec/m

Which of the following relations is true for viscous damping? a. Force α relative displacement b. Force α relative velocity c. Force α (1 / relative velocity) d. None of the above

Description : Which of the following relations is true for viscous damping? a. Force α relative displacement b. Force α relative velocity c. Force α (1 / relative velocity) d. None of the above

Last Answer : b. Force α relative velocity

Fluid resistance causes damping which is known as ______ a) Resistance damping b) Fluid dampingc) Viscous damping d) Liquid damping

Description : Fluid resistance causes damping which is known as ______ a) Resistance damping b) Fluid dampingc) Viscous damping d) Liquid damping

Last Answer : c) Viscous damping

Reduction in vibration amplitude after one complete cycle of single degree free vibration with dry friction damping is_____, if where F"= frictional force between mass and surface and k =stiffness of the system. a)4F/k a b) 2f/K C) 3F/k D)8F/k

Description : Reduction in vibration amplitude after one complete cycle of single degree free vibration with dry friction damping is_____, if where F"= frictional force between mass and surface and k =stiffness of the system. a)4F/k a b) 2f/K C) 3F/k D)8F/k

Last Answer : a)4F/k

In vibrometer, the relative motion between the mass and vibrating body is converted into proportional ________. (A) current (B) voltage (C) resistance (D) ampere

Description : In vibrometer, the relative motion between the mass and vibrating body is converted into proportional ________. (A) current (B) voltage (C) resistance (D) ampere

Last Answer : (B) voltage

In under damped vibrating system, if x 1 and x 2 are the successive values of the amplitude on the same side of the mean position, then the logarithmic decrement is equal to A x 1 /x 2 B log (x 1 /x 2 ) C loge (x 1 /x 2 ) D log (x 1 .x 2 )

Description : In under damped vibrating system, if x 1 and x 2 are the successive values of the amplitude on the same side of the mean position, then the logarithmic decrement is equal to A x 1 /x 2 B log (x 1 /x 2 ) C loge (x 1 /x 2 ) D log (x 1 .x 2 )

Last Answer : C loge (x 1 /x 2 )

In a 2-mass 3 spring vibrating system the two masses each are of 9.8 kg coupling spring is having a stiffness of 3430 N/m whereas the other two springs have each a stiffness of 8820 N/m. The two natural frequencies in rad /sec are A) 10 & 20 B) 20 & 30 C) 30 & 40D) 40 & 50

Description : In a 2-mass 3 spring vibrating system the two masses each are of 9.8 kg coupling spring is having a stiffness of 3430 N/m whereas the other two springs have each a stiffness of 8820 N/m. The two natural frequencies in rad /sec are A) 10 & 20 B) 20 & 30 C) 30 & 40D) 40 & 50

Last Answer : C) 30 & 40

Beats phenomenon occurs when a vibrating system is subjected to two different frequencies which are A) Quite different B) Equal C) Slightly different D) Integral multiple of each other

Description : Beats phenomenon occurs when a vibrating system is subjected to two different frequencies which are A) Quite different B) Equal C) Slightly different D) Integral multiple of each other

Last Answer : C) Slightly different

In under damped vibrating system, if x 1 and x 2 are the successive values of the C amplitude on the same side of the mean position, then the logarithmic decrement is equal to ( A ) x 1 /x 2 ( B ) log (x 1 /x 2 ) ( C ) loge (x 1 /x 2 ) ( D ) log (x 1 .x 2 )

Description : In under damped vibrating system, if x 1 and x 2 are the successive values of the C amplitude on the same side of the mean position, then the logarithmic decrement is equal to ( A ) x 1 /x 2 ( B ) log (x 1 /x 2 ) ( C ) loge (x 1 /x 2 ) ( D ) log (x 1 .x 2 )

Last Answer : ( C ) loge (x 1 /x 2 )

The number of degrees of freedom of a vibrating system depends on a. number of masses b. number of masses and degrees of freedom of each mass c. number of coordinates used to describe the position of each mass d. None of the above

Description : The number of degrees of freedom of a vibrating system depends on a. number of masses b. number of masses and degrees of freedom of each mass c. number of coordinates used to describe the position of each mass d. None of the above

Last Answer : b. number of masses and degrees of freedom of each mass

In under damped vibrating system, if x1 and x2 are the successive values of the amplitude on the same side of the mean position, then the logarithmic decrement is equal to a) x1/x2 b) log (x1/x2) c) ln (x1/x2) d) log (x1.x2)

Description : In under damped vibrating system, if x1 and x2 are the successive values of the amplitude on the same side of the mean position, then the logarithmic decrement is equal to a) x1/x2 b) log (x1/x2) c) ln (x1/x2) d) log (x1.x2)

Last Answer : c) ln (x1/x2)

Vibration measuring instruments are classified on the basis of ____________. (A) contact between the vibrating system and measuring instrument (B) the requirement of power source (C) method of measurements (D) all of the above

Description : Vibration measuring instruments are classified on the basis of ____________. (A) contact between the vibrating system and measuring instrument (B) the requirement of power source (C) method of measurements (D) all of the above

Last Answer : (D) all of the above

In under damped vibrating system, the amplitude of vibration ______. (A) decreases linearly with time (B) increases linearly with time (C) decreases exponentially with time (D) increases exponentially with time

Description : In under damped vibrating system, the amplitude of vibration ______. (A) decreases linearly with time (B) increases linearly with time (C) decreases exponentially with time (D) increases exponentially with time

Last Answer : (C) decreases exponentially with time

In under damped vibrating system, if x 1 and x 2 are the successive values of the amplitude on the same side of the mean position, then the logarithmic decrement is equal to a) x 1 /x 2 b) log (x 1 /x 2 )c) loge (x 1 /x 2 ) d) log (x 1 .x 2 )

Description : In under damped vibrating system, if x 1 and x 2 are the successive values of the amplitude on the same side of the mean position, then the logarithmic decrement is equal to a) x 1 /x 2 b) log (x 1 /x 2 )c) loge (x 1 /x 2 ) d) log (x 1 .x 2 )

Last Answer : b) log (x 1 /x 2 )

A seismometer is a device used to measure the ___________ of a vibrating body. (A) displacement (B) velocity (C) acceleration (D) all of the above

Description : A seismometer is a device used to measure the ___________ of a vibrating body. (A) displacement (B) velocity (C) acceleration (D) all of the above

Last Answer : (A) displacement

Which of the following instruments measure the amplitude of a vibrating body? (A) Vibrometers (B) Seismometer (C) Both (a) and (b) (D) None of these

Description : Which of the following instruments measure the amplitude of a vibrating body? (A) Vibrometers (B) Seismometer (C) Both (a) and (b) (D) None of these

Last Answer : (C) Both (a) and (b)

When the torsional pendulum vibrating the observed amplitudes on the same side of neutral axis for successive cycles are found to decay 50% of the initial value determine logarithmic decrement. A 0.065 B 0.006 C 0.693 D 0.5

Description : When the torsional pendulum vibrating the observed amplitudes on the same side of neutral axis for successive cycles are found to decay 50% of the initial value determine logarithmic decrement. A 0.065 B 0.006 C 0.693 D 0.5

Last Answer : C 0.693

When the torsional pendulum vibrating, the observed amplitudes on the same side of the neutral axis for successive cycles are found to decay 50% of the initial value determine logarithmic decrement. A 0.065 B 0.006 C 0.693 D 0.5

Description : When the torsional pendulum vibrating, the observed amplitudes on the same side of the neutral axis for successive cycles are found to decay 50% of the initial value determine logarithmic decrement. A 0.065 B 0.006 C 0.693 D 0.5

Last Answer : C 0.693

Calculate logarithmic decrement if the amplitude of the vibrating body reduces to half in two cycles A 0.346 B 0.693 C 0.301 D 0.150

Description : Calculate logarithmic decrement if the amplitude of the vibrating body reduces to half in two cycles A 0.346 B 0.693 C 0.301 D 0.150

Last Answer : A 0.346

The reciprocal of the interval of time by a vibrating body to complete a cycle is called A Period B Frequency C Resonance D None of the mentioned

Description : The reciprocal of the interval of time by a vibrating body to complete a cycle is called A Period B Frequency C Resonance D None of the mentioned

Last Answer : B Frequency

A vibrating machine of 100 kg is mounted on a rubber pad which has stiffness of 500 N/m. Determine force transmitted to the foundation if the unbalanced force 500 N acts on it. The frequency ratio (ω/ω n ) is 1.5 and ξ = 0.5 A. 461.62 N B. 400.23 N C. 450 N D. Insufficient data

Description : A vibrating machine of 100 kg is mounted on a rubber pad which has stiffness of 500 N/m. Determine force transmitted to the foundation if the unbalanced force 500 N acts on it. The frequency ratio (ω/ω n ) is 1.5 and ξ = 0.5 A. 461.62 N B. 400.23 N C. 450 N D. Insufficient data

Last Answer : A. 461.62 N

The rotating shaft or rotor vibrates with excessive lateral vibration at angular speed at which occurs is called as A) rotating speed B) critical speed C) vibrating speed D) None of the above

Description : The rotating shaft or rotor vibrates with excessive lateral vibration at angular speed at which occurs is called as A) rotating speed B) critical speed C) vibrating speed D) None of the above

Last Answer : B) critical speed

When no external force is acting on the vibrating body, the vibrations are said to be A. Free Vibrations B. Forced Vibrations C. Loaded Vibrations D. Undamped Vibrations

Description : When no external force is acting on the vibrating body, the vibrations are said to be A. Free Vibrations B. Forced Vibrations C. Loaded Vibrations D. Undamped Vibrations

Last Answer : A. Free Vibrations

When the external force is acting on the vibrating body, the vibrations are said to be A. Natural Vibrations B. Forced Vibrations C. Loaded Vibrations D. Undamped Vibrations

Description : When the external force is acting on the vibrating body, the vibrations are said to be A. Natural Vibrations B. Forced Vibrations C. Loaded Vibrations D. Undamped Vibrations

Last Answer : B. Forced Vibrations

The instrument that measures the displacement of a vibrating body is called__________ a. seismometer b. transducer c. accelerometer

Description : The instrument that measures the displacement of a vibrating body is called__________ a. seismometer b. transducer c. accelerometer

Last Answer : a. seismometer

The instrument that measures the acceleration of a vibrating body is called___________

Description : The instrument that measures the acceleration of a vibrating body is called___________

Last Answer : Ans- Accelerometer