What is the purpose of gland steam system?

What is the purpose of gland steam system? 
by

1 Answer

Answer :

Gland steam system is provided to arrest the steam leak from the turbine and to protect the air ingress into the turbine. 
by

Related questions

How gland-sealing steam is supplied?

Description : How gland-sealing steam is supplied? 

Last Answer : Gland sealing speed is supplied from main steam line.  

What is the purpose of deaerator in steam power plant?

Description : What is the purpose of deaerator in steam power plant?

Last Answer : The presence of dissolved gases like oxygen and carbon dioxide in water makes the water corrosive, as they react with metal and forms iron oxide. The solubility of the gases in the water ... deaerator by heating the feed water to saturation temperature through the bled steam from the turbine.

What are the parts of a cable gland?

Description : What are the parts of a cable gland? 

Last Answer : a. Check nut. b. Nipple. c. Metal washer. d. Neoprene rubber. e. Metal washer. f. Compression nut. 

A process stream of dilute aqueous solution flowing at the rate of10 Kg.s -1 is to be heated. Steam condensate at 95°C is available for heating purpose, also at a rate of 10 Kg.s -1 . A 1 - 1 shell and tube heat exchanger is available. The best arrangement is (A) Counter flow with process stream on shell side (B) Counter flow with process stream on tube side (C) Parallel flow with process stream on shell side (D) Parallel flow with process stream on tube side

Description : A process stream of dilute aqueous solution flowing at the rate of10 Kg.s -1 is to be heated. Steam condensate at 95°C is available for heating purpose, also at a rate of 10 Kg.s -1 . A 1 ... side (C) Parallel flow with process stream on shell side (D) Parallel flow with process stream on tube side

Last Answer : (A) Counter flow with process stream on shell side

In case of pulverised coal fired steam boiler, the secondary air serves the main purpose of (A) Transportation of coal (B) Drying of coal (C) Combustion of coal by supplying it around the burner (D) Preheating the primary air

Description : In case of pulverised coal fired steam boiler, the secondary air serves the main purpose of (A) Transportation of coal (B) Drying of coal (C) Combustion of coal by supplying it around the burner (D) Preheating the primary air

Last Answer : (C) Combustion of coal by supplying it around the burner

In case of pulverised coal fired steam boiler, the secondary air serves the main purpose of (A) Transportation of coal (B) Drying of coal (C) Combustion of coal by supplying it around the burner (D) Preheating the primary air

Description : In case of pulverised coal fired steam boiler, the secondary air serves the main purpose of (A) Transportation of coal (B) Drying of coal (C) Combustion of coal by supplying it around the burner (D) Preheating the primary air

Last Answer : (C) Combustion of coal by supplying it around the burner

The cost of fuel transportation is maxmimun in........ A.Hydro-electric power plant B.Steam power plant C.Nuclear power plant D.90% - 95%

Description : The cost of fuel transportation is maxmimun in........ A.Hydro-electric power plant B.Steam power plant C.Nuclear power plant D.90% - 95%

Last Answer : Ans: B

Steam pressures usually used in thermal power plants are (A) 5 kg/cm2 to 10 kg / cm2 (B) 50 kg/cm2 to 100 kg / cm2 (C) 110 kg/cm2 to 170 kg / cm2 (D) 200 kg/cm2 to 215 kg / cm2

Description : Steam pressures usually used in thermal power plants are (A) 5 kg/cm2 to 10 kg / cm2 (B) 50 kg/cm2 to 100 kg / cm2 (C) 110 kg/cm2 to 170 kg / cm2 (D) 200 kg/cm2 to 215 kg / cm2

Last Answer : Ans: C

The efficiency of a thermal power plant improves with (A) increased quantity of coal burnt (B) larger quantity of water used (C) lower load in the plant (D) use of high steam pressures.

Description : The efficiency of a thermal power plant improves with (A) increased quantity of coal burnt (B) larger quantity of water used (C) lower load in the plant (D) use of high steam pressures.

Last Answer : Ans: D

Coal used in power plant is also known as (A) steam coal (B) charcoal (C) coke (D) soft coal.

Description : Coal used in power plant is also known as (A) steam coal (B) charcoal (C) coke (D) soft coal.

Last Answer : Ans: A

Routine maintenance of dry-type transformers should include ______________. A. preventing the entrance of water from broken pipe lines steam lines B. keeping protective surfaces and insulating bushings free of dirt and conductive debris C. periodic testing of insulation resistance with a megger D. all of the above

Description : Routine maintenance of dry-type transformers should include ______________. A. preventing the entrance of water from broken pipe lines steam lines B. keeping protective surfaces and insulating bushings free of ... debris C. periodic testing of insulation resistance with a megger D. all of the above

Last Answer : Answer: D

What are different types of Steam boilers used in Thermal Power Plants?

Description : What are different types of Steam boilers used in Thermal Power Plants?

Last Answer : Answer: Different type of boiler used in thermal power plants are: • Fire tube boiler • Water tube boiler • Natural Circulation boiler • Forced Circulation boiler • Once through boiler

On what factors efficiency (thermal) of the steam plant depends?

Description : On what factors efficiency (thermal) of the steam plant depends?

Last Answer : Efficiency of the thermal plant depends on three factors, they are pressure of steam entering the turbine temperature of the steam entering the turbine pressure in the condenser Thermal efficiency ... as low as possible. Thermal efficiency also increases by reheating the steam between turbine stages

Why the Thermal efficiency of the steam power plant is quite low?

Description : Why the Thermal efficiency of the steam power plant is quite low?

Last Answer : In Steam power station, more than 50% of the total heat of combustion is lost as heat rejected to the condenser and the loss is unavoidable as the heat energy cannot be converted in to mechanical ... lowest temperature. This is the reason that the thermal efficiency of the power plant is quite low.

What is the overall efficiency of the Thermal Power Plant or Steam Power Plant?

Description : What is the overall efficiency of the Thermal Power Plant or Steam Power Plant?

Last Answer : Overall efficiency of the system is defined as the ratio of heat equivalent of electrical output to the heat of combustion. Generally Overall efficiency of the steam plant will always be ... by multiplying the thermal efficiency of the plant with efficiency of the generator (electrical efficiency)

What is the Thermal efficiency of steam power plant?

Description : What is the Thermal efficiency of steam power plant?

Last Answer : Thermal efficiency of steam power plant is defined as the ratio of heat equivalent of mechanical energy transmitted to the turbine shaft to the heat of combustion. Generally Thermal efficiency of the steam power plant will be in the range of 30-35%

Steam power plant works on which cycle?

Description : Steam power plant works on which cycle?

Last Answer : Steam power plant works on the principle of Rankine Cycle

Why cooling towers require in the Steam power plant ?

Description : Why cooling towers require in the Steam power plant ?

Last Answer : Cooling towers cool the warm water discharged from the condenser and feed the cooled water back to the condenser. There are two types of cooling methods provided in the cooling towers, they can be either ... finned tubes over which cooling air is passed. Heat is rejected to air as water is cooled

How does increase in steam input of the Alternator connected to infinite bus-bars affect this operation?

Description : How does increase in steam input of the Alternator connected to infinite bus-bars affect this operation?

Last Answer : KW output power of alternator increase with increase in steam input keeping excitation constant.

Why do cylindrical Alternators operate with steam turbines?

Description : Why do cylindrical Alternators operate with steam turbines?

Last Answer : A: Steam turbines are found to operate at fairly good efficiency only at high speeds. The high speed operation of rotors tends to increase mechanical losses and so the rotors should have a ... axial length are used for Synchronous generators driven by steam turbines with either 2 or 4 poles.

What are different types of Steam boilers used in Thermal Power Plants?

Description : What are different types of Steam boilers used in Thermal Power Plants?

Last Answer : Different type of boiler used in thermal power plants are: Fire tube boiler Water tube boiler Natural Circulation boiler Forced Circulation boiler Once through boiler

What consists of cooling water circuit and coal & ash circuit in steam power plant?

Description : What consists of cooling water circuit and coal & ash circuit in steam power plant?

Last Answer : The cooling water circuit consists of a pump, condenser and cooling tower. The coal and ash circuit consists of coal delivery, preparation of coal, handling of coal to the boiler furnace, ash handling and ash storage.

What consists of feed water and steam flow circuit in steam power?

Description : What consists of feed water and steam flow circuit in steam power?

Last Answer : The feed water and steam flow circuit consists of feed pump, economizer boiler drum super heater, turbine and condenser.

Name the four major circuits in steam power plant.

Description : Name the four major circuits in steam power plant.

Last Answer : • Coal and ash circuit • Air and flue gas circuit • Feed water and steam circuit • Cooling water circuit

List the factors to be considered while choosing a site for steam power station:

Description : List the factors to be considered while choosing a site for steam power station:

Last Answer : 1.Supply of fuel 2.Availability of water 3.Transportation facilities 4.Cost and type of land 5.Nearness to load centres 6.Distance from populated area

What is the function of the steam traps?

Description : What is the function of the steam traps?  

Last Answer : During startup the steam traps will bypass turbine drains.  

Why non-return valves are provided in the steam extraction lines?

Description : Why non-return valves are provided in the steam extraction lines?

Last Answer : Non-return valves are provided because when the turbine trips there will be an instant drop in pressure inside the turbine. But there will be steam in feed water heaters, which is at high pressure ... . So non-return valves are provided in steam extraction lines to prevent over speeding of turbine. 

Explain the principle of working of impulse steam turbine.

Description : Explain the principle of working of impulse steam turbine. 

Last Answer : When steam enters the turbine it suffers a change in direction and momentum, which gives rise to the rotation of the turbine. There will be no drop in pressure in impulse steam turbine.