Kennedy key is used in (A) Light duty applications (B) Heavy duty applications (C) High speed applications (D) Precision equipments

Kennedy key is used in

(A) Light duty applications

(B) Heavy duty applications

(C) High speed applications

(D) Precision equipments
by

1 Answer

Answer :

(B) Heavy duty applications
by

Related questions

Saddle key is more suitable than sunk key for heavy duty applications. a) True b) False

Description : Saddle key is more suitable than sunk key for heavy duty applications. a) True b) False

Last Answer : b) False

Saddle key is more suitable than sunk key for heavy duty applications. a) True b) False

Description : Saddle key is more suitable than sunk key for heavy duty applications. a) True b) False

Last Answer : b) False

_______is suitable as a lubricant for heavy-duty applications of rolling contact bearing. (a) Grease (b) Lubricating oil (c) Graphite (d) Air

Description : _______is suitable as a lubricant for heavy-duty applications of rolling contact bearing. (a) Grease (b) Lubricating oil (c) Graphite (d) Air

Last Answer : (b) Lubricating oil

Which of the following isn’t the property of a taper roller bearing? (a) High rigidity (b) Easy dismantling (c) Take low radial and heavy loads (d) It is unsuitable for high speed applications

Description : Which of the following isn’t the property of a taper roller bearing? (a) High rigidity (b) Easy dismantling (c) Take low radial and heavy loads (d) It is unsuitable for high speed applications

Last Answer : (c) Take low radial and heavy loads

Determine the length of kennedy key required to transmit 1200N-m and allowable shear in the key is 40N/mm2. The diameter of shaft and width of key can be taken as 40mm and 10mm respectively. a) 49mm b) 36mm c) 46mm d) 53mm

Description : Determine the length of kennedy key required to transmit 1200N-m and allowable shear in the key is 40N/mm2. The diameter of shaft and width of key can be taken as 40mm and 10mm respectively. a) 49mm b) 36mm c) 46mm d) 53mm

Last Answer : d) 53mm

Determine the length of kennedy key required to transmit 1200N-m and allowable shear in the key is 40N/mm2. The diameter of shaft and width of key can be taken as 40mm and 10mm respectively. a) 49mm b) 36mm c) 46mm d) 53mm

Description : Determine the length of kennedy key required to transmit 1200N-m and allowable shear in the key is 40N/mm2. The diameter of shaft and width of key can be taken as 40mm and 10mm respectively. a) 49mm b) 36mm c) 46mm d) 53mm

Last Answer : d) 53mm

The key in the form of semi-circular disk of uniform thickness is called, (A) Sunk key (B) Feather key (C) Woodruff key (D) Kennedy key

Description : The key in the form of semi-circular disk of uniform thickness is called, (A) Sunk key (B) Feather key (C) Woodruff key (D) Kennedy key

Last Answer : (C) Woodruff key

The type of key used when the gear is required to slide on the shaft is (A) Sunk key (B) Feather key (C) Woodruff key (D) Kennedy key

Description : The type of key used when the gear is required to slide on the shaft is (A) Sunk key (B) Feather key (C) Woodruff key (D) Kennedy key

Last Answer : (B) Feather key

The key, which fits in the keyway of hub, only is called, (A) Saddle key (B) Feather key (C) Woodruff key (D) Kennedy key

Description : The key, which fits in the keyway of hub, only is called, (A) Saddle key (B) Feather key (C) Woodruff key (D) Kennedy key

Last Answer : (A) Saddle key

The piston pin bearings in heavy-duty diesel engines are (a) needle roller bearings (b) tapered roller bearings (c) spherical roller bearings (d) cylindrical roller bearings

Description : The piston pin bearings in heavy-duty diesel engines are (a) needle roller bearings (b) tapered roller bearings (c) spherical roller bearings (d) cylindrical roller bearings

Last Answer : (a) needle roller bearings

Cocentric springs are used in (A) Heavy duty diesel engines (B) aircraft engines (C) railroad suspensions (D) all of the above

Description : Cocentric springs are used in (A) Heavy duty diesel engines (B) aircraft engines (C) railroad suspensions (D) all of the above

Last Answer : (D) all of the above

Deep groove ball bearings are used for (a) heavy thrust load only (b) the small angular displacement of shafts (c) radial load at high speed (d) combined thrust and radial loads at high speed

Description : Deep groove ball bearings are used for (a) heavy thrust load only (b) the small angular displacement of shafts (c) radial load at high speed (d) combined thrust and radial loads at high speed

Last Answer : (d) combined thrust and radial loads at high speed

The most suitable bearing for carrying very heavy loads with slow speed is (a) Hydrodynamic bearing (b) ball bearing [IAS 1994] (c) Roller bearing (d) hydrostatic bearing

Description : The most suitable bearing for carrying very heavy loads with slow speed is (a) Hydrodynamic bearing (b) ball bearing [IAS 1994] (c) Roller bearing (d) hydrostatic bearing

Last Answer : (d) hydrostatic bearing

A rolling contact bearing is specified as X307. Determine the series. a) Extra light series b) Light series c) Medium series d) Heavy series

Description : A rolling contact bearing is specified as X307. Determine the series. a) Extra light series b) Light series c) Medium series d) Heavy series

Last Answer : c) Medium series

Which of the following isn’t the property of taper roller? a) High rigidity b) Easy dismantling c) Take low radial and heavy loads d) All are the properties of tapper roller

Description : Which of the following isn’t the property of taper roller? a) High rigidity b) Easy dismantling c) Take low radial and heavy loads d) All are the properties of tapper roller

Last Answer : c) Take low radial and heavy loads

The bearings of heavy series have capacity __________ over the medium series. (a) 10 to 20% (b) 20 to 30% (c) 30 to 40% (d) 40 to 50%

Description : The bearings of heavy series have capacity __________ over the medium series. (a) 10 to 20% (b) 20 to 30% (c) 30 to 40% (d) 40 to 50%

Last Answer : (b) 20 to 30%

Which one of the following bearing is intended for a very heavy radial load? (a) Ball bearing (b) Self-aligning roller bearing (c) Roller bearing (d) Thrust bearing

Description : Which one of the following bearing is intended for a very heavy radial load? (a) Ball bearing (b) Self-aligning roller bearing (c) Roller bearing (d) Thrust bearing

Last Answer : (b) Self-aligning roller bearing

One which is applicable to a welded joint (i)Less rigidity (ii) Heavy (iii) Difficult process (iv) None

Description : One which is applicable to a welded joint (i)Less rigidity (ii) Heavy (iii) Difficult process (iv) None

Last Answer : (iv) None

Write down the applications of precision diode.

Description : Write down the applications of precision diode. 

Last Answer : 1.Half - wave rectifier 2.Full - Wave rectifier 3.Peak – value detector 4.Clipper 5.Clamper

________is suitable as a lubricant for low and moderate loads applications of rolling contact bearing. (a) Grease (b) Lubricating oil (c) Graphite (d) Air

Description : ________is suitable as a lubricant for low and moderate loads applications of rolling contact bearing. (a) Grease (b) Lubricating oil (c) Graphite (d) Air

Last Answer : (a) Grease

Match List -I (Bearings) with List-II (Applications) and select the using the codes given below the lists: [IAS-1998] List –I List-II A. Journal bearing 1. Electric motors B. Thrust bearing 2. Watches C. Conical pivot bearing 3. Marine engines D. Ball bearing 4. Swivelling chairs A B C D A B C D (a) 3 4 1 2 (b) 4 2 1 3 (c) 3 4 2 1 (d) 4 2 3 1

Description : Match List -I (Bearings) with List-II (Applications) and select the using the codes given below the lists: [IAS-1998] List -I List-II A. Journal bearing 1. Electric motors B. Thrust bearing 2. Watches C. Conical pivot bearing 3. Marine ... D (a) 3 4 1 2 (b) 4 2 1 3 (c) 3 4 2 1 (d) 4 2 3 1

Last Answer : (c) 3 4 2 1

Consider the following pairs of types of bearings and applications: 1. Partial Journal bearing................... Rail wagon axles 2. Full journal bearing ......................Diesel engine crank-shaft 3. Radial bearing ............................Combined radial and axial loads Which of these pairs is/are correctly matched? [IES-2000] (a) 1 alone (b) 1 and 2 (c) 2 and 3 (d) 1, 2 and 3

Description : Consider the following pairs of types of bearings and applications: 1. Partial Journal bearing................... Rail wagon axles 2. Full journal bearing ......................Diesel engine crank-shaft 3. Radial bearing ... matched? [IES-2000] (a) 1 alone (b) 1 and 2 (c) 2 and 3 (d) 1, 2 and 3

Last Answer : (b) 1 and 2

Feather key can be used to prevent axial motion between two elements. a) True b) False

Description : Feather key can be used to prevent axial motion between two elements. a) True b) False

Last Answer : b) False

Allen key is used to tighten (A) Cap screw with hexagonal head (B) Cap screw with fillister head (C) Cap screw with hexagonal socket head (D) Cap screw with flat head

Description : Allen key is used to tighten (A) Cap screw with hexagonal head (B) Cap screw with fillister head (C) Cap screw with hexagonal socket head (D) Cap screw with flat head

Last Answer : (C) Cap screw with hexagonal socket head

A muff coupling is connecting two shafts. The torque involved is 650N-m. The shaft diameter is 45mm with length and height of the key being 14mm and 80mm respectively. Find the compressive stress induced in the key. a) 70.1 N/mm2 b) 51.6N/mm2 c) 45.5N/mm2 d) None of the listed

Description : A muff coupling is connecting two shafts. The torque involved is 650N-m. The shaft diameter is 45mm with length and height of the key being 14mm and 80mm respectively. Find the compressive stress induced in the key. a) 70.1 N/mm2 b) 51.6N/mm2 c) 45.5N/mm2 d) None of the listed

Last Answer : b) 51.6N/mm2

A muff coupling is connecting two shafts. The torque involved is 650N-m. The shaft diameter is 45mm with length and breadth of the key being 14mm and 80mm respectively. Find the shear stress induced in the key. a) 30.2N/mm2 b) 25.8N/mm2 c) 34.4N/mm2 d) None of the listed

Description : A muff coupling is connecting two shafts. The torque involved is 650N-m. The shaft diameter is 45mm with length and breadth of the key being 14mm and 80mm respectively. Find the shear stress induced in the key. a) 30.2N/mm2 b) 25.8N/mm2 c) 34.4N/mm2 d) None of the listed

Last Answer : b) 25.8N/mm2

Woodruff key permits _____ movement b/w shaft and the hub. a) Axial b) Radial c) Eccentric d) None of the listed

Description : Woodruff key permits _____ movement b/w shaft and the hub. a) Axial b) Radial c) Eccentric d) None of the listed

Last Answer : b) Radial

The main advantage of sunk key is that it is a _____ drive. a) Positive b) Negative c) Neutral d) None of the listed

Description : The main advantage of sunk key is that it is a _____ drive. a) Positive b) Negative c) Neutral d) None of the listed

Last Answer : a) Positive

Hollow saddle key is superior to flat saddle key as far as power transmitting capability is concerned. a) True b) False

Description : Hollow saddle key is superior to flat saddle key as far as power transmitting capability is concerned. a) True b) False

Last Answer : b) False

A sunk key fits in the keyway of the _____ only. a) Hub b) Sleeve c) Both hub and sleeve d) Neither hub nor sleeve

Description : A sunk key fits in the keyway of the _____ only. a) Hub b) Sleeve c) Both hub and sleeve d) Neither hub nor sleeve

Last Answer : a) Hub

In sunk key no slips occurs A. True B. False

Description : In sunk key no slips occurs A. True B. False

Last Answer : A. True

Sunk key is a .............. drive. A. Positive B. Negative C. Neutral D. None

Description : Sunk key is a .............. drive. A. Positive B. Negative C. Neutral D. None

Last Answer : A. Positive

Saddle key is transmit power or torque through friction resistant only A. True B. False

Description : Saddle key is transmit power or torque through friction resistant only A. True B. False

Last Answer : A. True

In sunk key no slips occurs A. True B. False

Description : In sunk key no slips occurs A. True B. False

Last Answer : A. True

Taper is given on key is generally.......... A. Top side only B. Bottom side only C. On both side D. Any side

Description : Taper is given on key is generally.......... A. Top side only B. Bottom side only C. On both side D. Any side

Last Answer : A. Top side only

Taper on rectangular sink key is ....... A. 1 in 16 B. 1 in 48 C. 1 in 100 D. 1 in 120

Description : Taper on rectangular sink key is ....... A. 1 in 16 B. 1 in 48 C. 1 in 100 D. 1 in 120

Last Answer : C. 1 in 100

Sunk key fits in the keyway of the .......... only. A. Sleeve B. Hub C. Both sleeve and hub D. neither sleeve and hub

Description : Sunk key fits in the keyway of the .......... only. A. Sleeve B. Hub C. Both sleeve and hub D. neither sleeve and hub

Last Answer : B. Hub

Woodruff key permits _____ movement b/w shaft and the hub. a) Axial b) Radial c) Eccentric d) None of the listed

Description : Woodruff key permits _____ movement b/w shaft and the hub. a) Axial b) Radial c) Eccentric d) None of the listed

Last Answer : b) Radial

The main advantage of sunk key is that it is a _____ drive. a) Positive b) Negative c) Neutral d) None of the listed

Description : The main advantage of sunk key is that it is a _____ drive. a) Positive b) Negative c) Neutral d) None of the listed

Last Answer : a) Positive

Hollow saddle key is superior to flat saddle key as far as power transmitting capability is concerned. a) True b) False

Description : Hollow saddle key is superior to flat saddle key as far as power transmitting capability is concerned. a) True b) False

Last Answer : b) False

A sunk key fits in the keyway of the _____ only. a) Hub b) Sleeve c) Both hub and sleeve d) Neither hub nor sleeve

Description : A sunk key fits in the keyway of the _____ only. a) Hub b) Sleeve c) Both hub and sleeve d) Neither hub nor sleeve

Last Answer : a) Hub

The compressive stress induced in a square key is, (A) Equal to shear stress (B) Four times of shear stress (C) Twice of shear stress (D) Half of shear stress

Description : The compressive stress induced in a square key is, (A) Equal to shear stress (B) Four times of shear stress (C) Twice of shear stress (D) Half of shear stress

Last Answer : (C) Twice of shear stress

In case of sunk key, (A) The keyway is cut in the shaft only (B) The keyway is cut in the hub only (C) The keyway is cut in both the shaft and the hub (D) None of the above

Description : In case of sunk key, (A) The keyway is cut in the shaft only (B) The keyway is cut in the hub only (C) The keyway is cut in both the shaft and the hub (D) None of the above

Last Answer : (C) The keyway is cut in both the shaft and the hub

While designing a flange coupling, care is taken so that (A) Shaft is the weakest component (B) Bolts are the weakest component (C) Key is the weakest component (D) The flange is the weakest component

Description : While designing a flange coupling, care is taken so that (A) Shaft is the weakest component (B) Bolts are the weakest component (C) Key is the weakest component (D) The flange is the weakest component

Last Answer : (C) Key is the weakest component

The standard length for square or flat key in terms of shaft diameter (D) is, (A) d (B) 2d (C) 1.5d (D) 2.5d

Description : The standard length for square or flat key in terms of shaft diameter (D) is, (A) d (B) 2d (C) 1.5d (D) 2.5d

Last Answer : (C) 1.5d

A muff coupling is connecting two shafts. The torque involved is 650N-m. The shaft diameter is 45mm with length and breadth of the key being 14mm and 80mm respectively. Find the shear stress induced in the key. a) 30.2N/mm2 b) 25.8N/mm2 c) 34.4N/mm2 d) None of the listed

Description : A muff coupling is connecting two shafts. The torque involved is 650N-m. The shaft diameter is 45mm with length and breadth of the key being 14mm and 80mm respectively. Find the shear stress induced in the key. a) 30.2N/mm2 b) 25.8N/mm2 c) 34.4N/mm2 d) None of the listed

Last Answer : b) 25.8N/mm2

The distribution of the forces along the length of key fitted in a shaft (A) Varies linearly (B) Is uniform throughout (C) Varies exponentially, being more near the torque-input end (D) Varies exponentially, being less near the torque-input end

Description : The distribution of the forces along the length of key fitted in a shaft (A) Varies linearly (B) Is uniform throughout (C) Varies exponentially, being more near the torque-input end (D) Varies exponentially, being less near the torque-input end

Last Answer : (C) Varies exponentially, being more near the torque-input end

The required spacing between the disc on the gang bolt ranges from 15 to 25 cm for light duty and 25 to 30cm for heavy duty harrows is b. 25 to 35cm c. 25 to 40cm d. None of the above.

Description : The required spacing between the disc on the gang bolt ranges from 15 to 25 cm for light duty and 25 to 30cm for heavy duty harrows is b. 25 to 35cm c. 25 to 40cm d. None of the above.

Last Answer :    <!-- [endif] -->Ans - a. 25 to 30cm

Determine the practical applications of various types of compaction equipments.

Description : Determine the practical applications of various types of compaction equipments.

Last Answer : Practical applications of compaction equipments: 1. Compaction by rolling: a) Smooth Wheel Rollers: These rollers best suitable for subgrade or base coarse compaction of cohesion less soils. b) Pneumatic ... It is suitable for compacting granular soils with no fines in layer up to 1 m.

Satisfactory hydrodynamic film in a journal bearing is formed when (a) Journal speed is low; unit pressure on the bearing is high and viscosity of lubricant used is low [IES-2006] (b) Journal speed is low; unit pressure on the bearing is low and viscosity of lubricant used is low (c) Journal speed is high; unit pressure on the bearing is high and viscosity of lubricant used is high (d) Appropriate combination of journal speed, unit pressure on bearing and lubricant viscosity exists resulting in low coefficient of friction

Description : Satisfactory hydrodynamic film in a journal bearing is formed when (a) Journal speed is low; unit pressure on the bearing is high and viscosity of lubricant used is low [IES-2006] ... journal speed, unit pressure on bearing and lubricant viscosity exists resulting in low coefficient of friction

Last Answer : (c) Journal speed is high; unit pressure on the bearing is high and viscosity of lubricant used is high