Description : Concentric springs are used, (A) To achieve greater load carrying capacity with given space (B) To achieve fail-safe system (C) To eliminate surge (D) Any of the above objectives
Last Answer : (D) Any of the above objectives
Description : Can concentric springs be used to obtain a force which is not proportional to its deflection? a) True b) False
Last Answer : a) True
Description : A concentric spring consist of two helical compression springs (A) both springs always have right hand helix (B) both springs always have left hand helix (C) both springs always have opposite hand of helices (D) any of the above
Last Answer : (C) both springs always have opposite hand of helices
Description : The type of spring used to achieve greater load carrying capacity within given space is (A) Spiral spring (B) Springs in series (C) Multi-leaf spring (D) Concentric springs
Last Answer : (D) Concentric springs
Description : When two concentric springs are made of same material, having same free length and compressed equally by axial load, then the load shared by each spring is proportional to (A) Spring index of each spring ... spring (C) Mean coil diameter of each spring (D) Square of wire diameter of each spring
Last Answer : (D) Square of wire diameter of each spring
Description : Springs are used, (A) To absorb shocks and vibrations (B) To store and release energy (C) To measure force (D) For any of the above functions
Last Answer : (D) For any of the above functions
Description : Surge is a desirable effect in the sprigs. a) True b) False
Last Answer : b) False
Description : Surge is caused by resonance effect in the spring. a) True b) False
Description : The capacity of welded structures to damp vibrations is quite good. a) True b) False
Description : For two springs connected in parallel, net force is equal to the sum of force in each spring. a) True b) False
Description : For two springs connected in series, the net deflection is equal to the sum of deflection in two springs. a) True b) False
Description : Martin’s factor compensates for curvature effect in springs. a) True b) False
Description : Multi leaf springs are not recommended for automobile and rail road suspensions. a) True b) False
Description : Which of the following are not true for petroff’s equation? a) Shaft is considered concentric with the bearing b) Bearing is subjected to light load c) Is used to find coefficient of friction d) Frictional torque is given by fpr2l
Last Answer : d) Frictional torque is given by fpr2l
Description : In hydrodynamic bearing, (A) The axis of journal is eccentric with respect to axis of bearing (B) The axis of journal is concentric with respect to axis of bearing (C) The axis can be either eccentric or concentric depending upon speed (D) None of the above
Last Answer : (A) The axis of journal is eccentric with respect to axis of bearing
Description : In hydrostatic bearing, (A) The axis of journal is eccentric with respect to axis of bearing (B) The axis of journal is concentric with respect to axis of bearing (C) The axis can be either eccentric or concentric depending upon speed (D) None of the above
Last Answer : (B) The axis of journal is concentric with respect to axis of bearing
Description : What will happen if stresses induced due to surge in the spring exceeds the endurance limit stress of the spring. a) Fatigue Failure b) Fracture c) None of the listed d) Nipping
Last Answer : a) Fatigue Failure
Description : The type of spring used to achieve greater load carrying capacity within given space is (a)spiral spring (b) springs in series (c)multi-leaf spring (d) concentric spring
Last Answer : (d) concentric spring
Description : A concentric spring consists of 2 sprigs of diameter 10mm and 4mm. The net force acting on the composite spring is 5000N. Find the force acting on each of the two springs. (a) 1232.2N and 3767.8N (b) 786.4N and 4213.6N (c) 689.7N and 4310.3N (d) 645.3N and 4354.7N
Last Answer : (c) 689.7N and 4310.3N
Description : Two concentric springs with stiffness equal to 100 N/mm and 80 N/mm respectively, when subjected to load of 900N will deflect by a. 9mm b. 11.25 mm c. 5mm d. 31.5 mm
Last Answer : c. 5mm
Description : The type of spring used to absorb shocks and vibrations in vehicles is, (A) Helical extension spring (B) Multi-leaf spring (C) Spiral spring (D) Belleville (coned disk) spring
Last Answer : (B) Multi-leaf spring
Description : Which type of joints is better when the product is subjected to large vibrations: welded or threaded? a) Welded b) Threaded c) Both have same results d) Depends on the magnitude of the vibrational force
Last Answer : a) Welded
Description : Cocentric springs are used in (A) Heavy duty diesel engines (B) aircraft engines (C) railroad suspensions (D) all of the above
Last Answer : (D) all of the above
Description : Factor of safety in the design of springs is usually (A) 1.5 or less (B) 3 or less (C) 4.5 or less (D) 6 or less
Last Answer : (A) 1.5 or less
Description : For two springs in parallel, effective stiffness (k) is Where k 1 & k 2 are stiffness of springs 1 & 2 respectively (A) k 1 k 2 / (k 1 + k 2 ) (B) k 1 + k 2 (C) k 1 k 2 (D) (k 1 + k 2 ) / k 1 k 2
Last Answer : (B) k 1 + k 2
Description : For two springs in series, effective stiffness (k) is Where k 1 & k 2 are stiffness of springs 1 & 2 respectively (A) k 1 k 2 / (k 1 + k 2 ) (B) k 1 + k 2 (C) k 1 k 2 (D) (k 1 + k 2 ) / k 1 k 2
Last Answer : (A) k 1 k 2 / (k 1 + k 2 )
Description : Multi-leaf springs are used in (A) automobile suspension (B) railroad suspension (C) both (A) and (B) (D) none of the above
Last Answer : (C) both (A) and (B)
Description : The leaves of multi-leaf springs are subjected to (A) bending stress (B) shear stress (C) axial stress (D) all of the above
Last Answer : (A) bending stress
Description : In compression springs, the external force tends to (A) shorten the spring (B) lengthen the spring (C) both (A) and (C) (D) keep the length same
Last Answer : (A) shorten the spring
Description : Two springs of stiffness k1 and k2 are connected in series, the combined (A) k1k2/k1 + k2 (B) k1k2/k1 - k2 (C) k1 + k2 (D) k1 + k2/k1k2
Last Answer : (A) k1k2/k1 + k2
Description : Two springs of stiffness k1 and k2 are connected in parallel, the combined stiffness of the connection is given by, (A) k1k2/k1 + k2 (B) k1k2/k1 - k2 (C) k1 + k2 (D) k1 + k2/k1k2
Last Answer : (C) k1 + k2
Description : Wahl factor to account for direct shear stress and stress concentration due to curvature for helical springs is given by, (A) (4C - 1/4C - 4) + 0.615/C (B) (4C - 1/4C + 4) + 0.615/C (C) (4C + 1/4C - 4) + 0.615/C (D) (4C + 1/4C + 4) + 0.615/C
Last Answer : (A) (4C - 1/4C - 4) + 0.615/C
Description : When two Belleville springs are in parallel, half force is obtained for a given deflection. a) Half force b) Double force c) Same force d) Can’t be determined
Last Answer : b) Double force
Description : Which of the following statements are true of the multiple organ dysfunction syndrome (MODS)? A. The two-hit model proposes that secondary MODS may be produced when even a relatively ... intensive care units has decreased owing to increased awareness, prevention, and treatment of the syndrome.
Last Answer : Answer: ABC DISCUSSION: MODS is part of a clinical continuum that begins with the systemic inflammatory response syndrome, which is the host's stress response to any major insult such ... pathogenesis of MODS, the incidence of MODS continues to increase without a significant improvement in outcome
Description : If fluid film pressure is high and surface rigidity is low than mode of lubrication is called as elastohydrodynamic lubrication. a) True b) False
Description : Sliding contact bearings, also called plain bearings have no problem of wear. a) True b) False
Description : A knuckle joint is also called socket pin joint. a) True b) False
Description : Keyed joints never lead to stress concentration on shafts. a) True b) False
Description : Feather key can be used to prevent axial motion between two elements. a) True b) False
Description : The operation of flywheel is continuous. a) True b) False
Description : Flywheel and governor can be interchanged. a) True b) False
Description : Flywheels are used in punching and shear operation. a) True b) False
Description : Is use of a flywheel recommended when a large motor is required only for a small instant of time? a) True b) False
Description : The dynamic load-carrying capacity of a bearing is defined as the radial load in radial bearings that can be carried for a minimum life of 1000 revolutions. (a) True (b) False
Last Answer : (b) False
Description : For the majority of bearings, actual life is considerably greater than rated life. (a) True (b) False
Last Answer : (a) True
Description : The life of an individual ball bearing is the time period for which it works without any signs of failures. (a) True (b) False
Description : Stribeck equation gives the dynamic load capacity of the bearing. (a) True (b) False
Description : A total permanent deformation of 0.0001 of the ball diameter is taken for considering the static load capacity of the sh (a) True (b) False
Description : Needles bearing consist of rollers of small diameter and very small length. (a) True (b) False