The load shared by each spring is inversely proportional to the cross section of wire. a) Yes b) No, it is directly proportional c) It is proportional to its square d) It is proportional to its square root

The load shared by each spring is inversely proportional to the cross section of wire.

a) Yes

b) No, it is directly proportional

c) It is proportional to its square

d) It is proportional to its square root
by

1 Answer

Answer :

b) No, it is directly proportional
by

Related questions

When two concentric springs are made of same material, having same free length and compressed equally by axial load, then the load shared by each spring is proportional to (A) Spring index of each spring (B) Wire diameter of each spring (C) Mean coil diameter of each spring (D) Square of wire diameter of each spring

Description : When two concentric springs are made of same material, having same free length and compressed equally by axial load, then the load shared by each spring is proportional to (A) Spring index of each spring ... spring (C) Mean coil diameter of each spring (D) Square of wire diameter of each spring

Last Answer : (D) Square of wire diameter of each spring

The rated life of a bearing varies (a) directly as load (b) inversely as the square of the load (c) inversely as the cube of the load

Description : The rated life of a bearing varies (a) directly as load (b) inversely as the square of the load (c) inversely as the cube of the load

Last Answer : (c) inversely as the cube of the load

The rated life of a bearing varies A. Directly as load B. Inversely as square of load C. Inversely as cube of load D. Inversely as fourth power of load

Description : The rated life of a bearing varies A. Directly as load B. Inversely as square of load C. Inversely as cube of load D. Inversely as fourth power of load

Last Answer : C. Inversely as cube of load

The rated life of a bearing varies (A) Directly as load (B) Inversely as square of load (C) Inversely as cube of load (D) Inversely as fourth power of load

Description : The rated life of a bearing varies (A) Directly as load (B) Inversely as square of load (C) Inversely as cube of load (D) Inversely as fourth power of load

Last Answer : (C) Inversely as cube of load

The Reynold's number of a ship is __________ to its velocity and length. (A) Directly proportional (B) Inversely proportional (C) Square root of velocity (D) None of these

Description : The Reynold's number of a ship is __________ to its velocity and length. (A) Directly proportional (B) Inversely proportional (C) Square root of velocity (D) None of these

Last Answer : Answer: Option A

The velocity of sound is ….. the density of the medium. (a) Directly proportional to (b) Inversely proportional to (c) Directly proportional to the square root of (d) Inversely proportional to the square root of

Description : The velocity of sound is ….. the density of the medium. (a) Directly proportional to (b) Inversely proportional to (c) Directly proportional to the square root of (d) Inversely proportional to the square root of

Last Answer : Ans:(d)

In the Newton's law range, the terminal velocity of a solid spherical particle falling through a stationary fluid mass is __________ the fluid viscosity. (A) Directly proportional to (B) Inversely proportional to (C) Inversely proportional to the square root of (D) Independent of

Description : In the Newton's law range, the terminal velocity of a solid spherical particle falling through a stationary fluid mass is __________ the fluid viscosity. (A) Directly proportional to (B) Inversely proportional to (C) Inversely proportional to the square root of (D) Independent of

Last Answer : (B) Inversely proportional to

According to IS: 4561978, the flexural strength of concrete is (A) Directly proportional to compressive strength (B) Inversely proportional to compressive strength (C) Directly proportional to square root of compressive strength (D) Inversely proportional to square root of compressive strength

Description : According to IS: 4561978, the flexural strength of concrete is (A) Directly proportional to compressive strength (B) Inversely proportional to compressive strength (C) Directly proportional to square root of compressive strength (D) Inversely proportional to square root of compressive strength

Last Answer : Answer: Option C

The wavelength of the wave associated with the moving object is a) Directly proportional to the accelerating voltage b) Directly proportional to the square of accelerating voltage c) Inversely proportional to the square root of accelerating voltage d) Inversely proportional to the accelerating voltage

Description : The wavelength of the wave associated with the moving object is a) Directly proportional to the accelerating voltage b) Directly proportional to the square of accelerating voltage c) ... proportional to the square root of accelerating voltage d) Inversely proportional to the accelerating voltage

Last Answer : c) Inversely proportional to the square root of accelerating voltage

The Radius (or diameter) of bright rings in Newton’s rings is (a) Directly proportional to the square root of odd numbers (b) Inversely proportional to the square root of natural numbers (c) Directly proportional to the square root of even numbers (d) Directly proportional to the square root of natural numbers

Description : he Radius (or diameter) of bright rings in Newton's rings is (a) Directly proportional to the square root of odd numbers (b) Inversely proportional to the square root of natural numbers (c) ... to the square root of even numbers (d) Directly proportional to the square root of natural numbers

Last Answer : (a) Directly proportional to the square root of odd numbers

Let the only force acting on two bodies be their mutual interactions. If both bodies start from rest, the distances travelled by each will be a a.proportional to the respective masses of the bodies b.107 dynes c.inversely proportional to the respective masses of the bodies d.directly proportional to the square of the respective masses of the bodies e.inversely proportional to the square of the respective masses of the bodies

Description : Let the only force acting on two bodies be their mutual interactions. If both bodies start from rest, the distances travelled by each will be a a.proportional to the respective masses of the ... masses of the bodies e.inversely proportional to the square of the respective masses of the bodies

Last Answer : c. inversely proportional to the respective masses of the bodies

Indicate the false statement about the resistance of a wire (1) it depends on material of wire (2) it is directly proportional to the length of wire (3) it is directly proportional to the area of cross-section of wire (4) resistance of metallic wire increases with increase in temperature

Description : Indicate the false statement about the resistance of a wire (1) it depends on material of wire (2) it is directly proportional to the length of wire (3) it is directly proportional to the area of cross-section of wire (4) resistance of metallic wire increases with increase in temperature

Last Answer :  it is directly proportional to the area of cross-section of wire

The spring index is, (A) Ratio of wire diameter to mean coil diameter (B) Force per unit cross-sectional area of spring (C) Ratio of mean coil diameter to wire diameter (D) Force required to produce unit deflection

Description : The spring index is, (A) Ratio of wire diameter to mean coil diameter (B) Force per unit cross-sectional area of spring (C) Ratio of mean coil diameter to wire diameter (D) Force required to produce unit deflection

Last Answer : (C) Ratio of mean coil diameter to wire diameter

The stiffness of spring is, (A) Deflection per unit of axial force (B) Force per unit cross-sectional area of spring (C) Ratio of mean coil diameter to wire diameter (D) Force required to produce unit deflection

Description : The stiffness of spring is, (A) Deflection per unit of axial force (B) Force per unit cross-sectional area of spring (C) Ratio of mean coil diameter to wire diameter (D) Force required to produce unit deflection

Last Answer : (D) Force required to produce unit deflection

The angle of twist for a transmission shaft is inversely proportional to (A) Shaft diameter (B) (Shaft diameter)2 (C) (Shaft diameter)3 (D) (Shaft diameter)4

Description : The angle of twist for a transmission shaft is inversely proportional to (A) Shaft diameter (B) (Shaft diameter)2 (C) (Shaft diameter)3 (D) (Shaft diameter)4

Last Answer : (D) (Shaft diameter)4

The periodic time of a body moving in Simple Harmonic Motion is a.Directly proportional to its angular velocity b.Directly proportional to the weight of the body c.Inversely proportional to the square of angular velocity d.Directly proportional to the momentum of swinging body e.Inversely proportional to the angular velocity

Description : The periodic time of a body moving in Simple Harmonic Motion is a.Directly proportional to its angular velocity b.Directly proportional to the weight of the body c.Inversely proportional to ... d.Directly proportional to the momentum of swinging body e.Inversely proportional to the angular velocity

Last Answer : e. Inversely proportional to the angular velocity

The frequency of vibration of a stretched string is _______ its length. (a) Directly proportional to (b) Inversely proportional to (c) Directly proportional to the square of (d) Independent of

Description : The frequency of vibration of a stretched string is _______ its length. (a) Directly proportional to (b) Inversely proportional to (c) Directly proportional to the square of (d) Independent of

Last Answer : Ans:(b)

Boyle's law states that A. pressure of a gas is inversely proportional to its volume i.e. P × V = constant B. pressure of a gas is directly proportional to its volume i.e. P⁄V = constant C. pressure of a gas is inversely proportional to the square of its volume i.e. P × V² = constant D. pressure of a gas is directly proportional to the square of its volume i.e. P ⁄ V² = constant

Description : Boyle's law states that A. pressure of a gas is inversely proportional to its volume i.e. P V = constant B. pressure of a gas is directly proportional to its volume i.e. P⁄V = constant C. ... of a gas is directly proportional to the square of its volume i.e. P ⁄ V² = constant

Last Answer : pressure of a gas is inversely proportional to its volume i.e. P × V = constant

Assuming uniform density of the core, the acceleration due to gravity below the Earth's surface is A. inversely proportional to the square of the distance from the center of the Earth B. inversely proportional to the distance from the center of the Earth C. directly proportional to the square of the distance from the center of the Earth D. directly proportional to the distance from the center of the Earth

Description : Assuming uniform density of the core, the acceleration due to gravity below the Earth's surface is A. inversely proportional to the square of the distance from the center of the Earth ... center of the Earth D. directly proportional to the distance from the center of the Earth

Last Answer : directly proportional to the distance from the center of the Earth

According to Newton's law of universal gravitation, any two particles of finite mass attract one another with a force which is A. Inversely proportional to the product of their masses and directly proportional to the square of their distance apart B. Inversely proportional to the product of their masses and directly proportional to their distance apart C. Directly proportional to the product of their masses and inversely proportional to their distance apart D. Directly proportional to the product of their masses and inversely proportional to the square of their distance apart

Description : According to Newton's law of universal gravitation, any two particles of finite mass attract one another with a force which is A. Inversely proportional to the product of their masses and ... the product of their masses and inversely proportional to the square of their distance apart

Last Answer : Directly proportional to the product of their masses and inversely proportional to the square of their distance apart

In a heat exchanger, the rate of heat transfer from the hot fluid to the cold fluid (A) Varies directly as the area and the LMTD (B) Directly proportional to LMTD and inversely proportional to the area (C) Varies as square of the area (D) None of these

Description : In a heat exchanger, the rate of heat transfer from the hot fluid to the cold fluid (A) Varies directly as the area and the LMTD (B) Directly proportional to LMTD and inversely proportional to the area (C) Varies as square of the area (D) None of these

Last Answer : (A) Varies directly as the area and the LMTD

The energy loss over a length of pipeline according to Darcy-Weisbach equation for pipe flow is ___________ the mean velocity of flow. (A) Directly proportional to (B) Directly proportional to square of (C) Inversely proportional to (D) Inversely proportional to square of

Description : The energy loss over a length of pipeline according to Darcy-Weisbach equation for pipe flow is ___________ the mean velocity of flow. (A) Directly proportional to (B) Directly proportional to square of (C) Inversely proportional to (D) Inversely proportional to square of

Last Answer : (B) Directly proportional to square of

At very high concentration of enzymes, the rate of fermentation chemical reaction is __________ the concentration of reactants. (A) Independent of (B) Directly proportional to (C) Inversely proportional to (D) Proportional to the square of

Description : At very high concentration of enzymes, the rate of fermentation chemical reaction is __________ the concentration of reactants. (A) Independent of (B) Directly proportional to (C) Inversely proportional to (D) Proportional to the square of

Last Answer : (A) Independent of

The strain energy due to volumetric strain (A) Is directly proportional to the volume (B) Is directly proportional to the square of exerted pressure (C) Is inversely proportional to Bulk modulus (D) All the above

Description : The strain energy due to volumetric strain  (A) Is directly proportional to the volume  (B) Is directly proportional to the square of exerted pressure  (C) Is inversely proportional to Bulk modulus  (D) All the above 

Last Answer : (D) All the above 

Degree of consolidation is (A) Directly proportional to time and inversely proportional to drainage path (B) Directly proportional to time and inversely proportional to square of drainage path (C) Directly proportional to drainage path and inversely proportional to time (D) Directly proportional to square of drainage path and inversely proportional to time

Description : Degree of consolidation is (A) Directly proportional to time and inversely proportional to drainage path (B) Directly proportional to time and inversely proportional to square of drainage path (C ... to time (D) Directly proportional to square of drainage path and inversely proportional to time

Last Answer : Answer: Option B

The coherence length over which there is a strong relationship between amplitudes is; (A) Directly proportional to the bandwidth (B) Inversely proportional to the bandwidth (C) The square of the bandwidth (D) None of these

Description : The coherence length over which there is a strong relationship between amplitudes is; (A) Directly proportional to the bandwidth (B) Inversely proportional to the bandwidth (C) The square of the bandwidth (D) None of these

Last Answer : Answer: Option B

The resistance of a conductor is inversely proportional to its - (1) temperature (2) resistivity (3) area of cross section (4) length

Description : The resistance of a conductor is inversely proportional to its - (1) temperature (2) resistivity (3) area of cross section (4) length

Last Answer : (3) area of cross section Explanation: The resistance of a current carrying conductor is inversely proportional to the area of cross section of the conductor. This is because the resistance occurs due to the collision of electrons/charged particles.

Spiral spring is quite rigid. a) Yes b) No it is flexible c) It is of moderate rigidity d) Rigidity can’t be determined

Description : Spiral spring is quite rigid. a) Yes b) No it is flexible c) It is of moderate rigidity d) Rigidity can’t be determined

Last Answer : b) No it is flexible

For a specific centrifugal air blower operating at constant speed & capacity, the power requirement and pressure vary (A) Directly as square of gas density (B) Directly as gas density (C) Directly as square root of gas density (D) Inversely as gas density

Description : For a specific centrifugal air blower operating at constant speed & capacity, the power requirement and pressure vary (A) Directly as square of gas density (B) Directly as gas density (C) Directly as square root of gas density (D) Inversely as gas density

Last Answer : (B) Directly as gas density

. The pressure and power requirement of a gas fan at constant speed & capacity varies __________ the gas density. (A) Directly as (B) Inversely as square root of (C) Inversely as (D) As square of

Description : . The pressure and power requirement of a gas fan at constant speed & capacity varies __________ the gas density. (A) Directly as (B) Inversely as square root of (C) Inversely as (D) As square of

Last Answer : (A) Directly as

The longest leaf in a leaf spring is called centre leaf. a) It is called middle leaf b) It is called master leaf c) Yes d) None of the listed

Description : The longest leaf in a leaf spring is called centre leaf. a) It is called middle leaf b) It is called master leaf c) Yes d) None of the listed

Last Answer : b) It is called master leaf

The helix angle is very small about 20. The spring is open coiled spring. a) Yes b) It is closed coiled spring c) That small angle isn’t possible d) None of the listed

Description : The helix angle is very small about 20. The spring is open coiled spring. a) Yes b) It is closed coiled spring c) That small angle isn’t possible d) None of the listed

Last Answer : b) It is closed coiled spring

What is Hooke's Law? (1) Stress is inversely proportional to strain. (2) Stress is directly proportional to strain. (3) Stress and strain are dependent on each other. (4) Stress and strain are independent of each other.

Description : What is Hooke's Law? (1) Stress is inversely proportional to strain. (2) Stress is directly proportional to strain. (3) Stress and strain are dependent on each other. (4) Stress and strain are independent of each other.

Last Answer : (2) Stress is directly proportional to strain. Explanation: Hooke's law is a principle of physics that states that the force (F) needed to extend or compress a spring by some distance X scales linearly with respect to that distance.

What is Hooke's Law? (1) Stress is inversely proportional to strain. (2) Stress is directly proportional to strain. (3) Stress and strain are dependent on each other. (4) Stress and strain are independent of each other.

Description : What is Hooke's Law? (1) Stress is inversely proportional to strain. (2) Stress is directly proportional to strain. (3) Stress and strain are dependent on each other. (4) Stress and strain are independent of each other.

Last Answer : (2) Stress is directly proportional to strain. Explanation: Hooke's law is a principle of physics that states that the force (F) needed to extend or compress a spring by some distance X scales linearly with respect to that distance.

What is Hooke’s Law? (1) Stress is inversely proportional to strain. (2) Stress is directly proportional to strain. (3) Stress and strain are dependent on each other. (4) Stress and strain are independent of each other.

Description : What is Hooke’s Law? (1) Stress is inversely proportional to strain. (2) Stress is directly proportional to strain. (3) Stress and strain are dependent on each other. (4) Stress and strain are independent of each other.

Last Answer : (2) Stress is directly proportional to strain. Explanation: Hooke’s law is a principle of physics that states that the force (F) needed to extend or compress a spring by some distance X scales linearly with respect to that distance.

Extension and applied force are A. directly proportional B. inversely proportional C. are independent of each otherD. inversely related

Description : Extension and applied force are A. directly proportional B. inversely proportional C. are independent of each other D. inversely related

Last Answer : inversely related

Electrical force exerted by two point charges on each other is inversely proportional to A. sum of their charges B. product of their charges C. distance between them D. square of distance between them

Description : Electrical force exerted by two point charges on each other is inversely proportional to A. sum of their charges B. product of their charges C. distance between them D. square of distance between them

Last Answer : square of distance between them

A fillet weld is an approximately triangular cross section joining two surfaces lying parallels to each other. a) True b) False

Description : A fillet weld is an approximately triangular cross section joining two surfaces lying parallels to each other. a) True b) False

Last Answer : b) False

Pick out the wrong statement. (A) The equivalent stiffness of two springs (of equal stiffness 'S') in series is S/2 while in parallel is 2S (B) For a helical spring, deflection is proportional to D3(D = mean coil diameter) or d4(d = wire diameter) (C) Crushing load or columns is less than the buckling load (D) Modulus of resilience is proportional to (stress at elastic limit)2

Description : Pick out the wrong statement. (A) The equivalent stiffness of two springs (of equal stiffness 'S') in series is S/2 while in parallel is 2S (B) For a helical spring, deflection is ... is less than the buckling load (D) Modulus of resilience is proportional to (stress at elastic limit)2

Last Answer : (C) Crushing load or columns is less than the buckling load

Flow rates of particular nozzle is directly proportional to a. square root of pressure b. orifice area c. Both (a) and (B) d. none of the above

Description : Flow rates of particular nozzle is directly proportional to a. square root of pressure b. orifice area c. Both (a) and (B) d. none of the above

Last Answer : c. Both (a) and (B)

-The method used to induce a layer of residual compressive stress on the surface of the spring wire, is (A) shot peening (B) burnishing (C) lapping (D) none of the above

Description : -The method used to induce a layer of residual compressive stress on the surface of the spring wire, is (A) shot peening (B) burnishing (C) lapping (D) none of the above

Last Answer : (A) shot peening

The spring index (C) is (A) mean coil diameter / wire diameter (B) wire diameter / mean coil diameter (C) wire diameter x mean coil diameter (D) none of the above

Description : The spring index (C) is (A) mean coil diameter / wire diameter (B) wire diameter / mean coil diameter (C) wire diameter x mean coil diameter (D) none of the above

Last Answer : (A) mean coil diameter / wire diameter

Torsional shear stresses are induced in the spring wire when (A) spring is under compression (B) spring is under tension (C) both (A) and (B) (D) none of the above

Description : Torsional shear stresses are induced in the spring wire when (A) spring is under compression (B) spring is under tension (C) both (A) and (B) (D) none of the above

Last Answer : (C) both (A) and (B)

When the helical torsion spring is subjected to torque, the type of stress induced in the spring wire is, (A) Tensile stress (B) Compressive stress (C) Bending stress (D) Torsional shear stress

Description : When the helical torsion spring is subjected to torque, the type of stress induced in the spring wire is, (A) Tensile stress (B) Compressive stress (C) Bending stress (D) Torsional shear stress

Last Answer : (C) Bending stress

When the helical compression spring is subjected to axial compressive force, the type of stress induced in the spring wire is, (A) Tensile stress (B) Compressive stress (C) Bending stress (D) Torsional shear stress

Description : When the helical compression spring is subjected to axial compressive force, the type of stress induced in the spring wire is, (A) Tensile stress (B) Compressive stress (C) Bending stress (D) Torsional shear stress

Last Answer : (D) Torsional shear stress

The maximum shear stress in spring wire is induced at (A) Inner surface of the coil (B) Outer surface of the coil (C) Central surface of the coil (D) End coils

Description : The maximum shear stress in spring wire is induced at (A) Inner surface of the coil (B) Outer surface of the coil (C) Central surface of the coil (D) End coils

Last Answer : (A) Inner surface of the coil

When the helical extension spring is subjected to axial tensile force, the type of stress induced in the spring wire is, (A) Tensile stress (B) Compressive stress (C) Bending stress (D) Torsional shear stress

Description : When the helical extension spring is subjected to axial tensile force, the type of stress induced in the spring wire is, (A) Tensile stress (B) Compressive stress (C) Bending stress (D) Torsional shear stress

Last Answer : (D) Torsional shear stress

If number of coils are 8 and wire diameter of spring 3mm, then solid length is given by? a) None of the listed b) 27mm c) 24mm d) 21mm

Description : If number of coils are 8 and wire diameter of spring 3mm, then solid length is given by? a) None of the listed b) 27mm c) 24mm d) 21mm

Last Answer : c) 24mm

If spring index=2.5, what can be concluded about stresses in the wire? a) They are high b) They are negligible c) They are moderate d) Cannot be determined

Description : If spring index=2.5, what can be concluded about stresses in the wire? a) They are high b) They are negligible c) They are moderate d) Cannot be determined

Last Answer : a) They are high