What are the two important properties of SiO2?

1 Answer

Answer :

1.SiO2 is an extremely hard protective coatng & is unaffected by almost all reagents except by hydrochloric acid. Thus it stands against any contamination. 

2.By selective etching of SiO2 , diffusion of impurities through carefully defined windows in the SiO2 can be accomplished to fabricate various components.

Related questions

Description : The parasitic element of an antenna system will A. decrease its directivity B. increase its directivity C. give the antenna unidirectional properties D. both B and C

Last Answer : D. both B and C

Description : ______ is the measurement of a unilateral antenna properties of directivity A. Phase angle B. Antenna gain C. Beamwidth D. Bandwidth

Last Answer : C. Beamwidth

Description : (3) preventing rapid setting of cement Explanation: Portland cement clinker is a hydraulic material which shall consist of at least two-thirds by mass of calcium silicates, the remainder consisting of ... mixed with water by way of a complex series of chemical reactions still only partly understood.

Last Answer : Milk is a colloidal system in which: (1) Water is dispersed in fat (2) Fat is dispersed in water (3) Fat and water are dispersed in each other (4) Fat is dissolved

Description : What is the trade name of SiO2 ?

Last Answer : SiO2 's commercial name is Bali.

Description : Sio2 What type of mineral ?

Last Answer : Sio2 acidic mineral.

Description : Is SiO2 ionic or molecular compound?

Last Answer : Silicon dioxide is a covalent compound.

Description : Is sio2 covalent?

Last Answer : Need answer

Description : Write Uses of SiO2?

Last Answer : Ans .It is used in manufacturing ofcement. Used in reverberatory furnace as a flux.

Description : Low grade phosphate rock can be used in electrical furnace, because (A) Of the better CaO/SiO2 balance for slag formation (B) CaO content is less (C) It is cheap (D) It produces low cost product

Last Answer : (A) Of the better CaO/SiO2 balance for slag formation

Description : Rocks containing more than 65 % Sio2 are a. Neutral b. Acidic c. Alkaline d. Calcareous

Last Answer : b. Acidic

Description : Cement mainly contains (A) CaO, SiO2 , Al2O3 (B) MgO, SiO2 , K2O (C) Al2O3 , MgO, Fe2O3 (D) CaO, MgO, K2O

Last Answer : (A) CaO, SiO2 , Al2O3

Description : Portland cement consists mainly of (A) CaO & SiO2 (B) SiO2 & Al2O3 (C) CaO & Al2O3 (D) CaO & Fe2O3

Last Answer : (A) CaO & SiO2

Description : Which of the following is the second major component of cement? (A) Al2O3 (B) SiO2 (C) CaO (D) Fe2O3

Last Answer : (B) SiO2

Description : Ganister contains maximum percentage of (A) FeO (B) SiO2 (C) MgO

Last Answer : (B) SiO2

Description : More than 95% of __________ is present in corundum. (A) SiO2 (B) Al2O3 (C) CaSiO2 (D) MgO

Last Answer : B) Al2O3

Description : Limestone addition in the blast furnace is done to flux __________ present in the raw materials. (A) SiO2 (B) Al2O3 (C) MnO2 (D) P

Last Answer : Limestone addition in the blast furnace is done to flux __________ present in the raw materials. (A) SiO2 (B) Al2O3 (C) MnO2 (D) P

Description : Which of the following is an acidic constituent of B.F. slag? (A) SiO2 (B) FeO (C) MgO (D) CaO

Last Answer : Option A

Description : 9. Which of the following is an acidic constituent of B.F. slag? (A) SiO2 (B) FeO (C) MgO

Last Answer : Option A

Description : Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2

Last Answer : Option A

Description : The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All the above

Last Answer : Answer: Option D

Description : The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All these

Last Answer : Answer: Option D

Description : On nephelometry turbidity unit (NTU) is equal to the turbidity produced by (a) 1 mg SiO2 dissolved in 1 l of distilled water with the test being run according to absorption principle (b) 1 ... Formazin dissolved in 1 l o f distilled water with the test being run according to scattering principle.

Last Answer : (d) 1 mg Formazin dissolved in 1 l o f distilled water with the test being run according to scattering principle.

Description : .The most resistant filling materials to fill class IV cavities are: A. Resins with silicone dioxide (SiO2) B. Resins with glass or quartz C. Silico-phosphate D. Silicates

Last Answer : B. Resins with glass or quartz

Description : Inside the ____ is a gas generator containing a mixture of NaN3 (Sodium Azide), KNO3 (Potassium Nitrate) and SiO2 (Silicon Dioxide). When the undesired event happens, an electric circuit is ... chemical reactions generate nitrogen gas that fills ____ in 20 to 30 milliseconds. Fill up the blank

Last Answer : Air-bags in automobiles.

Description : The main constituents of glass is (A) SiO2 (B) B2O3 (C) Al2O3 (D) Cr2O3

Last Answer : (A) SiO2

Description : The lunar soil consists primarily of: w) FeTiO2 x) A12O3 y) SiO2 z) H2O

Last Answer : ANSWER: W -- FeTiO2

Description : Which one of the following is classified as a covalent network solid crystal? w) CaO x) SiO2 y) CO2 z) Pb

Last Answer : ANSWER: B -- SiO2

Description : Good grounding is important for A. horizontal antennas B. broadside array antennas C. vertical antennas D. Yagi-Uda antennas

Last Answer : C. vertical antennas

Description : Which one is not an important characteristic of the physical layer? A. Electrical B. Logical C. Mechanical D. All of the choices

Last Answer : B. Logical

Description : Encryption of data is important to ensure its privacy. It is most commonly achieved by using a ____. A. public-key encryption B. private-key encryption C. password-key encryption D. character set encryption

Last Answer : A. public-key encryption

Description : What is the most important specification of loudspeakers and microphones? A. Frequency response B. Power density C. Field Strength D. Gain

Last Answer : A. Frequency response

Description : List the important characteristics of a voltage regulator.

Last Answer : The output voltage is fixed at a specified value, The unregulated voltage must be at least 2V more than the regulated voltage.