Description : Portland cement consists mainly of (A) CaO & SiO2 (B) SiO2 & Al2O3 (C) CaO & Al2O3 (D) CaO & Fe2O3
Last Answer : (A) CaO & SiO2
Description : Which of the following is the second major component of cement? (A) Al2O3 (B) SiO2 (C) CaO (D) Fe2O3
Last Answer : (B) SiO2
Description : The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All the above
Last Answer : Answer: Option D
Description : The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All these
Description : (3) preventing rapid setting of cement Explanation: Portland cement clinker is a hydraulic material which shall consist of at least two-thirds by mass of calcium silicates, the remainder consisting of ... mixed with water by way of a complex series of chemical reactions still only partly understood.
Last Answer : Milk is a colloidal system in which: (1) Water is dispersed in fat (2) Fat is dispersed in water (3) Fat and water are dispersed in each other (4) Fat is dissolved
Description : More than 95% of __________ is present in corundum. (A) SiO2 (B) Al2O3 (C) CaSiO2 (D) MgO
Last Answer : B) Al2O3
Description : Which of the following is an acidic constituent of B.F. slag? (A) SiO2 (B) FeO (C) MgO (D) CaO
Last Answer : Option A
Description : Which raw material is used to impart colour to the glass? a) Al2O3 b) CoO c) CaO d) MgO
Last Answer : b) CoO
Description : Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2
Description : Ganister contains maximum percentage of (A) FeO (B) SiO2 (C) MgO
Description : Which catalyst is used in the manufacture of ethylene oxide by oxidation of ethylene? (A) AgO (B) Al2O3 (C) ZnCl2 (D) Fe2O3
Last Answer : (A) AgO
Description : Which is a catalyst promoter used in catalytic ammonia synthesis reaction? (A) Al2O3 (B) Cr2O3 (C) K2O (D) MnO
Last Answer : (C) K2O
Description : Catalyst used in ammonia synthesis uses __________ as a promoter. (A) Pt (B) K2O (C) Al2O3 (D) Ni
Last Answer : (B) K2O
Description : Limestone addition in the blast furnace is done to flux __________ present in the raw materials. (A) SiO2 (B) Al2O3 (C) MnO2 (D) P
Last Answer : Limestone addition in the blast furnace is done to flux __________ present in the raw materials. (A) SiO2 (B) Al2O3 (C) MnO2 (D) P
Description : 9. Which of the following is an acidic constituent of B.F. slag? (A) SiO2 (B) FeO (C) MgO
Description : Low grade phosphate rock can be used in electrical furnace, because (A) Of the better CaO/SiO2 balance for slag formation (B) CaO content is less (C) It is cheap (D) It produces low cost product
Last Answer : (A) Of the better CaO/SiO2 balance for slag formation
Description : The main constituents of glass is (A) SiO2 (B) B2O3 (C) Al2O3 (D) Cr2O3
Last Answer : (A) SiO2
Description : Which one of the following is classified as a covalent network solid crystal? w) CaO x) SiO2 y) CO2 z) Pb
Last Answer : ANSWER: B -- SiO2
Description : How many of the following liberate `O_(2)` on heating in a dry test tube ? `CaO, Fe_(2)O_(3), Fe_(3)O_(4), FeO, Cr_(2)O_(3), XeF_(4), Al_(2)O_(3), MgO
Last Answer : How many of the following liberate `O_(2)` on heating in a dry test tube ? `CaO, Fe_(2)O_(3), Fe_(3)O_(4), ... 3), XeF_(4), Al_(2)O_(3), MgO, Na_(2)O`
Description : A Potassic fertiliser contains 50% K2O. It could be (A) Potassium sulphate (B) Potassium chloride (C) A mixture of NaCl + KCl (D) None of these
Last Answer : (A) Potassium sulphate
Description : Base suspension fertiliser essentially contains (A) 13% N2 and 43% P2O5 (B) 43% N2 and 13% P2O5 (C) 43% N2 and 13% K2O (D) 43% K2O and 43% P2O5
Last Answer : (A) 13% N2 and 43% P2O5
Description : Glass is (A) Mainly CaO (B) Subjected to galvanising (C) A super cooled liquid (D) All (A), (B) and (C)
Last Answer : (C) A super cooled liquid
Description : Potassic fertiliser is graded based on its __________ content. (A) KCl (B) K2O (C) KNO3 (D) K2SO4
Description : Promoter used in NH3 synthesis catalyst is (A) K2O (B) SiO3 (C) V2O5 (D) U2O3
Last Answer : (C) V2O5
Description : 5-10-5 fertilisers mean that they contain (A) 5, 10, 5% respectively of N2 , P2O5 and K2O (B) Only 5 to 10% active fertiliser constituents (C) 5 to 10% filler & carrier of soil conditioners (D) None of these
Last Answer : (A) 5, 10, 5% respectively of N2 , P2O5 and K2O
Description : How many grams of O2 are required to produce 100.0 g of Fe2O3?
Last Answer : Need answer
Description : What the answer for FeS2 plus O2 - and get Fe2O3 plus SO2?
Last Answer : FeS + 7 O2 = 2 Fe2O3 + 4 SO2
Description : At which temperature direct reduction of Fe2O3 by carbon is possible ?
Last Answer : Ans. Above 1123 K, carbon can reduce Fe2O3
Description : Tick out the incorrect match: List I (Ore) List II (Mineral) a) Dolomite- MgCO3 b) Gibbsite3- H2O c) Gypsum2- H2O d) Geothite- Fe2O3
Last Answer : d) Geothite- Fe2O3
Description : During smelting process, the combination of fuel in the furnace (A) Forms carbon dioxide (B) Carbon dioxide with carbon forms carbon mono-oxide (C) Carbon mono-oxide reacts with Fe2O3 to form iron and liberates CO2 (D) All the above
Description : In which of the following states maximum iron ore is found ? (1) FeCO3 (2) Fe2O3 (3) Fe3O4 (4) FeS2
Last Answer : Fe2O3
Description : Consider the production of ammonia from methene and air as raw materials. The catalysts used are: (i) __________ for steam reforming of methane and (ii) __________ for ammonia synthesis. (A) (i) - Ni/Al2O3 ; (ii) - Cu - ZnO/ ... (i) - Ni/Al2O3 ; (ii) - Fe/Al2O3 (D) (i) - Fe/Al2O3 ; (ii) - Ni/Al2O3
Last Answer : (C) (i) - Ni/Al2O3 ; (ii) - Fe/Al2O3
Description : Fat splitting catalyst is (A) CaCO3 (B) ZnO (C) Al2O3 (D) Fe
Last Answer : (B) ZnO
Description : Manufacture of phthalic anhydride uses __________ as a catalyst. (A) Ni (B) Cr (C) V2O5 (D) Al2O3
Description : Identify the correct statement with reference to the extractive metallurgy of aluminium. (A) The electrolyte consists of molten Na3AlF6 with approximately 1 to 8% Al2O3 (B) Approximately 80% of ... is immediately vaporised (D) Anode effect sets in when the cryolite concentration goes below 40%.
Last Answer : (A) The electrolyte consists of molten Na3AlF6 with approximately 1 to 8% Al2O3
Description : The Al2O3 content of cryolite in Hall-Heroult cell is maintained between __________ percent. (A) 2-5 (B) 18-20 (C) 12-15 (D) 6-12
Last Answer : (A) 2-5
Description : In Haber process of production of ammonia K2O is used as :
Last Answer : In Haber process of production of ammonia K2O is used as : a. catalyst b. inhibitor c. promotor d. adsorbate
Description : Potassic fertilizer containing highest amount of K2O
Last Answer : Ans. Muriate of potash/KCl (60%K2O)
Description : The relative percentage of N2 , P2O5 and K2O” in a fertilizer
Last Answer : Ans. Fertilizer ratio
Description : Which of the following oxide(s) is/are soluble in water to form alkalis? (i) Na2O (ii) SO2 (iii) K2O (iv) NO2 (a) (i) and (iii) (b) (i) only (c) (ii) and (iv) (d) (iii) only
Last Answer : Answer: (a)
Description : Toxicity of Mg can be modified by adding ________: a. N b. PO4 c. Ca d. K2O
Last Answer : Ca
Description : Soils having 200 kg available K2O/ha will be — fertile soil for K a. High b. Low c. Medium d. None of these
Last Answer : c. Medium
Description : Eschka mixture, which is used for the determination of sulphur in coal, is a mixture of (A) MgO & Na2CO3 (B) MgSO4 & BaCl2 (C) BaSO4 & NaCl (D) MgCO3 & NaC
Last Answer : (A) MgO & Na2CO3
Description : Pick out the exothermic reaction out of the following: (A) C + H2O = CO + H2 (B) CaC2 + H2O = Ca(OH)2 + C2H2 (C) MgCO3 = MgO + CO2 (D) All (A), (B) and (C)
Last Answer : (B) CaC2 + H2O = Ca(OH)2 + C2H2
Description : The end bleaching agent used to move last traces of colour bodies from the pulp is (A) Chlorine dioxide (ClO2 ) (B) MgO (C) SO2 gas (D) Mercaptans
Last Answer : (A) Chlorine dioxide (ClO2 )
Description : Considering the endothermic dissociation of CaCO3 in a closed vessel (CaCO3 ⇌ CaO + CO2 ), the pressure of CO2 increases, if (A) A catalyst is added (B) The temperature is increased (C) An inert gas is pumped keeping the temperature constant (D) None of these
Last Answer : (B) The temperature is increased
Description : Calcination reaction of limestone (CaCO3 → CaO + CO2 ) goes to completion in the rotary kiln, because (A) CaO is not dissociated (B) CO2 escapes continuously (C) Of high calcination temperature (D) CaO is more stable than CaCO3
Last Answer : (B) CO2 escapes continuously
Description : In case of calcination of limestone, CaCO3 CaO + CO2 , the addition of more of CaO will result in __________ in the concentration of CO2 . (A) No change (B) Increase (C) Decrease (D) Unpredictable from the data
Last Answer : (A) No change
Description : CaO is called (A) Quick lime (B) Slaked lime (C) Limestone (D) Calcite
Last Answer : (A) Quick lime