Description : Cement mainly contains (A) CaO, SiO2 , Al2O3 (B) MgO, SiO2 , K2O (C) Al2O3 , MgO, Fe2O3 (D) CaO, MgO, K2O
Last Answer : (A) CaO, SiO2 , Al2O3
Description : The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All the above
Last Answer : Answer: Option D
Description : The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All these
Description : Limestone addition in the blast furnace is done to flux __________ present in the raw materials. (A) SiO2 (B) Al2O3 (C) MnO2 (D) P
Last Answer : Limestone addition in the blast furnace is done to flux __________ present in the raw materials. (A) SiO2 (B) Al2O3 (C) MnO2 (D) P
Description : Portland cement consists mainly of (A) CaO & SiO2 (B) SiO2 & Al2O3 (C) CaO & Al2O3 (D) CaO & Fe2O3
Last Answer : (A) CaO & SiO2
Description : Which of the following is the second major component of cement? (A) Al2O3 (B) SiO2 (C) CaO (D) Fe2O3
Last Answer : (B) SiO2
Description : Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2
Last Answer : Option A
Description : Ganister contains maximum percentage of (A) FeO (B) SiO2 (C) MgO
Description : Which of the following is an acidic constituent of B.F. slag? (A) SiO2 (B) FeO (C) MgO (D) CaO
Description : 9. Which of the following is an acidic constituent of B.F. slag? (A) SiO2 (B) FeO (C) MgO
Description : The main constituents of glass is (A) SiO2 (B) B2O3 (C) Al2O3 (D) Cr2O3
Last Answer : (A) SiO2
Description : (3) preventing rapid setting of cement Explanation: Portland cement clinker is a hydraulic material which shall consist of at least two-thirds by mass of calcium silicates, the remainder consisting of ... mixed with water by way of a complex series of chemical reactions still only partly understood.
Last Answer : Milk is a colloidal system in which: (1) Water is dispersed in fat (2) Fat is dispersed in water (3) Fat and water are dispersed in each other (4) Fat is dissolved
Description : Which raw material is used to impart colour to the glass? a) Al2O3 b) CoO c) CaO d) MgO
Last Answer : b) CoO
Description : Beehive coke ovens are made of __________ bricks. (A) Silica (B) Fireclay (C) Silicon carbide (D) Corundum
Last Answer : (A) Silica
Description : Catalyst used in ammonia synthesis uses __________ as a promoter. (A) Pt (B) K2O (C) Al2O3 (D) Ni
Last Answer : (B) K2O
Description : Consider the production of ammonia from methene and air as raw materials. The catalysts used are: (i) __________ for steam reforming of methane and (ii) __________ for ammonia synthesis. (A) (i) - Ni/Al2O3 ; (ii) - Cu - ZnO/ ... (i) - Ni/Al2O3 ; (ii) - Fe/Al2O3 (D) (i) - Fe/Al2O3 ; (ii) - Ni/Al2O3
Last Answer : (C) (i) - Ni/Al2O3 ; (ii) - Fe/Al2O3
Description : Manufacture of phthalic anhydride uses __________ as a catalyst. (A) Ni (B) Cr (C) V2O5 (D) Al2O3
Last Answer : (C) V2O5
Description : The Al2O3 content of cryolite in Hall-Heroult cell is maintained between __________ percent. (A) 2-5 (B) 18-20 (C) 12-15 (D) 6-12
Last Answer : (A) 2-5
Description : (a) Show on a diagram the transfer of electrons between the atoms in the formation of MgO. Write symbols of cation and anion present in MgO. (b) Name the solvent in which ionic compounds are generally soluble. (c) Why are aqueous solutions of ionic compounds able to conduct electricity? -Chemistry
Last Answer : (b) Ionic compounds are soluble in water. (c) It is because aqueous solutions consist of ions which can move freely in them and carry current.
Description : Which of the following is the hardest material? (A) Calcite (B) Quartz (C) Corundum (D) Gypsum
Last Answer : (C) Corundum
Description : Which of the following is the softest material? (A) Talc (B) Feldspar (C) Corundum (D) Calcite
Last Answer : (A) Talc
Description : The hardest material just prior to diamond in Mho's scale is (A) Topaz (B) Carborundum (C) Corundum (D) Calcite
Description : The hardest material just prior to diamond in Mhos scale is (A) Topaz (B) Carborundum (C) Corundum (D) Calcite
Description : Which of the following is the hardest material? (A) Topaz (B) Quartz (C) Corundum (D) Fluorite
Description : Which of the following is the softest material? (A) Quartz (B) Calcite (C) Corundum (D) Fluorite
Last Answer : (B) Calcite
Description : Spark plugs are made of (A) High alumina ceramic (B) Metallic carbides (C) Corundum (D) Carborundum
Last Answer : (A) High alumina ceramic
Description : Which of the following is not an abrasive material? (A) Bakelite (B) Pumice (C) Corundum (D) Carborundum
Last Answer : (A) Bakelite
Description : Mannheim furnace is used in the manufacture of (A) Hydrochloric acid (B) H2SO4 by Chamber process (C) Calcium carbide (D) Corundum
Last Answer : (A) Hydrochloric acid
Description : Carbon disulphide is mainly used in the production of(A) Viscose rayon (B) Corundum (C) Plasticiser for unsaturated polyester (D) Paints
Last Answer : (A) Viscose rayon
Description : hich of the following is the most suitable abrasive for grinding high tensile strength materials? (A) Silicon carbide (B) Corundum (C) Aluminium oxide (D) Boron carbide
Last Answer : Option C
Description : For ethanol-water system, the lowering of distillate quality from 95% to 92% will cause __________ plate requirement. (A) No change in theoretical (B) Marginal decrease in the number of (C) Major decrease in the number of (D) None of these
Last Answer : (B) Marginal decrease in the number of
Description : Which is a catalyst promoter used in catalytic ammonia synthesis reaction? (A) Al2O3 (B) Cr2O3 (C) K2O (D) MnO
Last Answer : (C) K2O
Description : Which catalyst is used in the manufacture of ethylene oxide by oxidation of ethylene? (A) AgO (B) Al2O3 (C) ZnCl2 (D) Fe2O3
Last Answer : (A) AgO
Description : Fat splitting catalyst is (A) CaCO3 (B) ZnO (C) Al2O3 (D) Fe
Last Answer : (B) ZnO
Description : Identify the correct statement with reference to the extractive metallurgy of aluminium. (A) The electrolyte consists of molten Na3AlF6 with approximately 1 to 8% Al2O3 (B) Approximately 80% of ... is immediately vaporised (D) Anode effect sets in when the cryolite concentration goes below 40%.
Last Answer : (A) The electrolyte consists of molten Na3AlF6 with approximately 1 to 8% Al2O3
Description : Low grade phosphate rock can be used in electrical furnace, because (A) Of the better CaO/SiO2 balance for slag formation (B) CaO content is less (C) It is cheap (D) It produces low cost product
Last Answer : (A) Of the better CaO/SiO2 balance for slag formation
Description : What is tbe best slogan for the mineral corundum?
Last Answer : Need answer
Description : The oxide of what lightweight metal forms corundum, rubies, and sapphires?
Last Answer : ANSWER: ALUMINUM
Description : The following proportion of the total body calcium is present in bones and teeth: (A) 75% (B) 90% (C) 95% (D) 99%
Last Answer : Answer : D
Description : Out of the total enzymes present in a cell, a mitochondrion alone has (A) 4% (B) 70% (C) 95% (D) 50%
Last Answer : Answer : B
Description : Living cell contains 60 – 95% water. Water present in human body is (a) 60 – 65% (b) 50 – 55% (c) 75 – 80% (d) 65 – 70%.
Last Answer : (d) 65 – 70%.
Description : Eschka mixture, which is used for the determination of sulphur in coal, is a mixture of (A) MgO & Na2CO3 (B) MgSO4 & BaCl2 (C) BaSO4 & NaCl (D) MgCO3 & NaC
Last Answer : (A) MgO & Na2CO3
Description : Pick out the exothermic reaction out of the following: (A) C + H2O = CO + H2 (B) CaC2 + H2O = Ca(OH)2 + C2H2 (C) MgCO3 = MgO + CO2 (D) All (A), (B) and (C)
Last Answer : (B) CaC2 + H2O = Ca(OH)2 + C2H2
Description : The end bleaching agent used to move last traces of colour bodies from the pulp is (A) Chlorine dioxide (ClO2 ) (B) MgO (C) SO2 gas (D) Mercaptans
Last Answer : (A) Chlorine dioxide (ClO2 )
Description : Rocks containing more than 65 % Sio2 are a. Neutral b. Acidic c. Alkaline d. Calcareous
Last Answer : b. Acidic
Description : What are amphoteric oxides? Choose the amphoteric oxides from amongst the following oxides: Na2O, ZnO, Al2O3, CO2, H2O -Chemistry
Last Answer : Those oxides which reacts with acids as well as bases to produce salts and water are called amphoteric oxides, e.g. Na2O, ZnO, are amphoteric oxides among given oxides.
Description : If 0.905 mol of Al2O3 is produced what mass of iron is also produced?
Description : Which of the following agents is used in order to make benzene react with bromine to give bromobenzene? (a) Ultraviolet light (b) Fe catalyst (c) Nickel catalyst (d) Al2O3 catalyst
Last Answer : Fe catalyst
Description : Which of the following agents is used in order to make benzene react with acetyl chloride to give acetophenone? (a) Ultraviolet light (b) AlCl3 catalyst (c) Platinum catalyst (d) Al2O3 catalyst
Last Answer : AlCl3 catalyst
Description : 36. Aluminium is extracted from alumina (Al2O3 ) by electrolysis of a molten mixture of : (1) Al2O3 + KF + Na3AlF6 (2) Al2O3 + HF + NaAlF4 (3) Al2O3 + CaF2 + NaAlF4 (4) Al2O3 + Na3AlF6 + CaF2
Last Answer : Al2O3 + Na3AlF6 + CaF2