Description : The tapered roller bearings can take (a) radial load only (b) axial load only (c) both radial and axial loads (d) none of the mentioned
Last Answer : (c) both radial and axial loads
Description : The piston pin bearings in heavy-duty diesel engines are (a) needle roller bearings (b) tapered roller bearings (c) spherical roller bearings (d) cylindrical roller bearings
Last Answer : (a) needle roller bearings
Description : Tapered roller bearings can take (a) radial load only (b) axial load only (c) both radial and axial loads and the ratio of these being greater than unity (d) both radial and axial loads and the ratio of these being less than unity
Last Answer : (c) both radial and axial loads and the ratio of these being greater than unity
Description : Which of the bearings given below SHOULD NOT be subjected to a thrust load? (a) Deep groove ball bearing (b) Angular contact ball bearing (c) Cylindrical (straight) roller bearing (d) Single row tapered roller bearing
Last Answer : (c) Cylindrical (straight) roller bearing
Description : Which one of the following bearing is intended for a very heavy radial load? (a) Ball bearing (b) Self-aligning roller bearing (c) Roller bearing (d) Thrust bearing
Last Answer : (b) Self-aligning roller bearing
Description : Match List-I (Type of Anti-friction bearing) with List-II (Specific Use) and select the using the code given below the Lists: [IES-2006] List-I List -II A. Self-aligning ball bearing 1. For pure axial load B. Taper roller bearing 2. For ... C D (a) 2 1 3 4 (b) 3 4 2 1 (c) 2 4 3 1 (d) 3 1 2 4
Last Answer : (c) 2 4 3 1
Description : There is a problem of alignment in deep groove ball bearings. (a) Yes (b) No, it is self-aligning (c) It aligns itself only in some particular cases (d) Can’t be determined
Last Answer : (a) Yes
Description : There is problem of alignment in deep groove ball bearings. a) Yes b) No, it is self-aligning c) It aligns itself only in some particular cases d) Can’t be determined
Last Answer : a) Yes
Description : Which of the following elements is not used as a roller in roller bearings? (a) Cylindrical (b) Taper (c) Spherical (d) None of the mentioned
Last Answer : (d) None of the mentioned
Description : Which of the following bearings carry thrust load in one direction? (a) Spherical roller thrust bearings (b) Taper roller bearings (c) Spherical roller thrust bearings and taper roller bearings (d) none of the mentioned
Last Answer : (c) Spherical roller thrust bearings and taper roller bearings
Description : Which of the following cannot tolerate misalignment? (a) Angular contact bearing (b) Cylinder roller bearing (c) Thrust ball bearings (d) All of the listed
Last Answer : (d) All of the listed
Description : In standard taper roller bearings, the angle of taper of the outer raceway is (a) 5° (b) 8° (c) 15° (d) 25°
Last Answer : (d) 25°
Description : Antifriction bearings are (a) thick lubricated bearings (b) plastic bearings (c) ball and roller bearings (d) thin lubricated bearings
Last Answer : (c) ball and roller bearings
Description : Match List I with List II and select the : [IES-2002] List I (Bearings) List II (Load type) A. Hydrodynamic Journal bearing 1. High radial and thrust load combined B. Rectangular Hydrostatic bearing 2. Radial load only C. Taper Roller ... (a) 2 3 1 4 (b) 4 1 3 2 (c) 2 1 3 4 (d) 4 3 1 2
Last Answer : (a) 2 3 1 4
Description : Which of the following cannot tolerate misalignment? a) Angular contact bearing b) Cylinder roller bearing c) Thrust ball bearings d) All of the listed
Last Answer : d) All of the listed
Description : Which of the following bearing will have least coefficient of friction a.Single ball bearing b.Cylinderical roller bearing c.Self aligury bearing d.Thrust ball bearing e.Tapered bearing
Last Answer : e. Tapered bearing
Description : Threaded joints are non-separable joints. a) True b) False
Last Answer : b) False
Description : The purpose of lubrication in an antifriction bearing is (a) to reduce the friction between balls and races (b) dissipation of frictional heat prevention of corrosion (c) protection of the bearing from dirt and other foreign particles (d) all of the mentioned
Last Answer : (d) all of the mentioned
Description : What type of bearing will you recommend for use in the conveyor belt roller? (a) Ball-bearing (b) Roller bearing (c) Magnetic bearing (d) None of the mentioned
Last Answer : (b) Roller bearing
Description : Deep groove ball bearings create a lot of noise. (a) Yes (b) Depends on the application (c) They create very less noise (d) No reference frame for comparison is mentioned
Last Answer : (c) They create very less noise
Description : Antifriction bearings are (a) sleeve bearings (b) hydrodynamic bearings (c) thin lubricated bearings (d) none of the mentioned
Last Answer : (d) none of the mentioned
Description : The antifriction bearings (a) have low starting and low running friction at moderate speeds (b) have a high initial cost (c) can carry both radial and thrust loads (d) all the mentioned
Last Answer : (d) all the mentioned
Description : The rolling contact bearings as compared to sliding contact bearings have (a) small overall dimensions (b) accuracy of shaft alignment (c) low starting and low running friction except at very high speeds (d) all the mentioned
Description : Deep groove ball bearings creates a lot of noise. a) Yes b) They create very less noise c) Depends on the application d) No reference frame for comparison is mentioned
Last Answer : b) They create very less noise
Description : The type of bearing generally used to support the discs on a standard disc plough is: A. Ball bearing. B. Tapered roller bearing. C. Plain roller bearing. D. Bush bearing.
Last Answer : B. Tapered roller bearing.
Description : An antifriction bearing consists of (a) rolling elements (b) races (c) cages (d) all of the listed
Last Answer : (d) all of the listed
Description : Balls and the races of the deep groove ball may roll freely without any sliding. a) True b) False
Last Answer : a) True
Description : Self-locking takes place when a) Coefficient of friction is equal to or greater than the tangent of the helix angle b) Coefficient of friction is lesser than or equal to the tangent of the helix ... friction is equal to or greater than the tangent of the helix angle d) None of the mentioned
Last Answer : c) Coefficient of friction is equal to or greater than the tangent of the helix angle
Description : A cylinder roller creates lesser noise than a deep groove ball bearing. (a) True (b) False
Last Answer : (b) False
Description : Which of the following cannot take the radial load? (a) Cylindrical Roller bearing (b) Taper roller bearing (c) Thrust ball bearing (d) Spherical roller bearing
Last Answer : (c) Thrust ball bearing
Description : Which of the following isn’t the property of a taper roller bearing? (a) High rigidity (b) Easy dismantling (c) Take low radial and heavy loads (d) It is unsuitable for high speed applications
Last Answer : (c) Take low radial and heavy loads
Description : Cylindrical roller bearing has a lower load capacity as compared to deep groove ball bearing. (a) True (b) False
Description : Which of the following bearing is preferred for oscillating conditions? (a) Double row roller bearing (b) Taper roller bearing (c) Needle roller bearing (d) Angular contact single row ball bearing
Last Answer : (c) Needle roller bearing
Description : The most suitable bearing for carrying very heavy loads with slow speed is (a) Hydrodynamic bearing (b) ball bearing [IAS 1994] (c) Roller bearing (d) hydrostatic bearing
Last Answer : (d) hydrostatic bearing
Description : What is the main advantage of hydrodynamic bearing over roller bearing? (a) Easy to assemble [IES-2005] (b) Relatively low price (c) Superior load carrying capacity at higher speeds (d) Less frictional resistance
Last Answer : (c) Superior load carrying capacity at higher speeds
Description : Cylinder roller creates lesser noise than deep groove ball bearing. a) True b) False
Description : Which of the following cannot take radial load? a) Cylindrical Roller bearing b) Taper roller bearing c) Thrust ball bearing d) None of the listed
Last Answer : c) Thrust ball bearing
Description : Which of the following isn’t the property of taper roller? a) High rigidity b) Easy dismantling c) Take low radial and heavy loads d) All are the properties of tapper roller
Last Answer : c) Take low radial and heavy loads
Description : Ball bearings are, usually, made from (a) low carbon steel (b) high carbon steel (c) medium carbon steel (d) chrome steel
Last Answer : (d) chrome steel
Description : The ball bearing is subjected to a radial load of 4000 N. Expected life for 90% bearings is 9000 hr and the shaft is rot (a) 42.21 kN (b) 37.29 kN (c) 26.33 kN (d) 35.22 kN
Last Answer : (b) 37.29 kN
Description : Calculate the bearing life if expected life for 90% bearings is 9000 hr and the shaft is rotating at 1500 rpm. (a) 850 million rev (b) 810 million rev (c) 810 hr (d) 850 hr
Last Answer : (b) 810 million rev
Description : The dynamic load-carrying capacity of a bearing is defined as the radial load in radial bearings that can be carried for a minimum life of 1000 revolutions. (a) True (b) False
Description : For the majority of bearings, actual life is considerably greater than rated life. (a) True (b) False
Last Answer : (a) True
Description : The bearings of medium series have capacity __________ over the light series. (a) 10 to 20% (b) 20 to 30% (c) 30 to 40% (d) 40 to 50%
Last Answer : (c) 30 to 40%
Description : The bearings of heavy series have capacity __________ over the medium series. (a) 10 to 20% (b) 20 to 30% (c) 30 to 40% (d) 40 to 50%
Last Answer : (b) 20 to 30%
Description : In angular contact bearings, ____ bearings are required to take thrust load in both directions. (a) 1 (b) 2 (c) 3 (d) 4
Last Answer : (b) 2
Description : Deep groove ball bearings are used for (a) heavy thrust load only (b) the small angular displacement of shafts (c) radial load at high speed (d) combined thrust and radial loads at high speed
Last Answer : (d) combined thrust and radial loads at high speed
Description : Different types of bearings are designed to operate at different operating speeds. Speed is specified as the maximum (a) rpm (b) metres/second (c) metres/minute (d) metres/hour
Last Answer : (b) metres/second
Description : The ball bearings are provided with a cage (a) to reduce friction (b) to facilitate slipping of balls (c) to prevent the lubricant from flowing out (d) to maintain the balls at a fixed distance apart
Last Answer : (d) to maintain the balls at a fixed distance apart
Description : The rolling contact bearings are known as (a) thick lubricated bearings (b) plastic bearings (c) thin lubricated bearings (d) antifriction bearings
Last Answer : (d) antifriction bearings