: Moving a coil in and out of magnetic field induces A. force B. potential difference C. e.m.f D. voltage

: Moving a coil in and out of magnetic field induces

A. force

B. potential difference

C. e.m.f

D. voltage
by

1 Answer

Answer :

e.m.f


by

Related questions

What is the mathematical formula for computing the output voltage from a moving coil in a magnetic field?

Description : What is the mathematical formula for computing the output voltage from a moving coil in a magnetic field?

Last Answer : 8. e = Emax sine θ.

Total number of magnetic field lines passing through an area is called A. magnetic flux density B. magnetic flux C. e.m.f D. voltage

Description : Total number of magnetic field lines passing through an area is called A. magnetic flux density B. magnetic flux C. e.m.f D. voltage

Last Answer : magnetic flux

The coil of a moving coil galvanometer has an effective area of 4xx10^(-2)m^(2)`. It is suspended in a magnetic field of `5xx10^(-2)` Wb `m^(-2)`. If

Description : The coil of a moving coil galvanometer has an effective area of 4xx10^(-2)m^(2)`. It is suspended in a magnetic field of `5xx10^(-2)` Wb `m^(-2)`. If

Last Answer : The coil of a moving coil galvanometer has an effective area of 4xx10^(-2)m^(2)`. It is suspended in a ... D. current sensitivity is `40 deg` `A^(-1)`

E.M.F for a coil depends upon A. the cross sectional area B. no. of turns of wire C. the magnitude of magnetic flux density D. all of above

Description : E.M.F for a coil depends upon A. the cross sectional area B. no. of turns of wire C. the magnitude of magnetic flux density D. all of above

Last Answer : all of above

In Hall effect, voltage across probe is known as A. hall voltage B. e.m.f C. potential difference D. hall potential

Description : In Hall effect, voltage across probe is known as A. hall voltage B. e.m.f C. potential difference D. hall potential

Last Answer : hall voltage

The left hand rule correlates to (a) current, induced e.m.f. and direction of force on a conductor (b) magnetic field, electric field and direction of force on a conductor (c) self induction, mutual induction and direction of force on a conductor (d) current, magnetic field and direction of force on a conductor

Description : The left hand rule correlates to (a) current, induced e.m.f. and direction of force on a conductor (b) magnetic field, electric field and direction of force on a conductor (c) self induction, ... and direction of force on a conductor (d) current, magnetic field and direction of force on a conductor

Last Answer : (d) current, magnetic field and direction of force on a conductor

The induced current can be increased by: a. Using strong magnetic field b. moving loop faster c. Replacing loop by coil d. all of above

Description : The induced current can be increased by: a. Using strong magnetic field b. moving loop faster c. Replacing loop by coil d. all of above

Last Answer : d. all of above

The pole faces of U-shaped magnet in a moving coil galvanometer are made concave to a) decrease the strength of magnetic field b) create a non-uniform magnetic field c) make the magnetic field radial d) All of these

Description : The pole faces of U-shaped magnet in a moving coil galvanometer are made concave to a) decrease the strength of magnetic field b) create a non-uniform magnetic field c) make the magnetic field radial d) All of these

Last Answer : c) make the magnetic field radial

Magnitude of induced e.m.f is proportional to A. rate of change of current B. rate of change of voltage C. rate of change of magnetic flux linkage D. rate of change of resistance

Description : Magnitude of induced e.m.f is proportional to A. rate of change of current B. rate of change of voltage C. rate of change of magnetic flux linkage D. rate of change of resistance

Last Answer : rate of change of magnetic flux linkage

Force on a moving charge in a uniform magnetic field depends uponA. magnetic flux density B. the charge on the particle C. the speed of particle D. all of above

Description : Force on a moving charge in a uniform magnetic field depends uponA. magnetic flux density B. the charge on the particle C. the speed of particle D. all of above

Last Answer : all of above

The force on a charged particle moving parallel to magnetic field lines is: w) in the direction of the field x) zero y) perpendicular to the field z) in the opposite direction of the field

Description : The force on a charged particle moving parallel to magnetic field lines is: w) in the direction of the field x) zero y) perpendicular to the field z) in the opposite direction of the field

Last Answer : ANSWER: X -- ZERO

A charge q is moving with a velocity `v_(1)=1hati` m/s at a point in a magentic field and experiences a force `F=q[-hatj+1hatk]` N. If the charge is m

Description : A charge q is moving with a velocity `v_(1)=1hati` m/s at a point in a magentic field and experiences a force `F=q[-hatj+1hatk]` N. If the charge is m

Last Answer : A charge q is moving with a velocity `v_(1)=1hati` m/s at a point in a magentic field and experiences a force `F ... `(hat(i)+hat(j)-hat(k))Wb//m^(2)`

A straight wire of length 0.20 m moves at a steady speed of 3.0 m s-1 at right angles to the magnetic field of flux density 0.10 T. The e.m.f induced across ends of wire is A. 0.5 V B. 0.06 V C. 0.05 V D. 0.04 V

Description : A straight wire of length 0.20 m moves at a steady speed of 3.0 m s-1 at right angles to the magnetic field of flux density 0.10 T. The e.m.f induced across ends of wire is A. 0.5 V B. 0.06 V C. 0.05 V D. 0.04 V

Last Answer : 0.06 V

One method of testing for a reversed shunt field coil in a DC generator or motor is by connecting the field to a direct current source, at reduced field rated voltage, and test for polarity using a/an ____________. A. iron bar across each field B. magnetic compass placed near each field C. test lamp across adjacent fields D. copper jumper across the interpole connections

Description : One method of testing for a reversed shunt field coil in a DC generator or motor is by connecting the field to a direct current source, at reduced field rated voltage, and test for ... placed near each field C. test lamp across adjacent fields D. copper jumper across the interpole connections

Last Answer : Answer: B

The induced voltage across a coil with 250 turns that is located in a magnetic field and is changing at a ...

Description : The induced voltage across a coil with 250 turns that is located in a magnetic field and is changing at a rate of 8 Wb/s is A. 1,000 V B. 2,000 V C.31.25 V D. 3,125 V

Last Answer : The induced voltage across a coil with 250 turns that is located in a magnetic field and is changing at a rate of 8 Wb/s is 2,000 V 

Whenever there is force on magnetic pole, there exists A. magnetic field B. electric field C. current D. voltage

Description : Whenever there is force on magnetic pole, there exists A. magnetic field B. electric field C. current D. voltage

Last Answer : electric field

iv) A rectangular coil free to rotate is placed in uniform magnetic field with its plane parallel to the magnetic lines of force. Then the coil willa) rotate to maximize the magnetic flux through its plane. b)rotate to minimize the magnetic flux through its plane.c) not experience any torque since the magnetic flux through its plane is zero.d) experience the constant torque equal to NBIA

Description : iv) A rectangular coil free to rotate is placed in uniform magnetic field with its plane parallel to the magnetic lines of force. Then the coil willa) rotate to maximize the magnetic flux through ... since the magnetic flux through its plane is zero.d) experience the constant torque equal to NBIA

Last Answer : iv) A rectangular coil free to rotate is placed in uniform magnetic field with its plane parallel ... d) experience the constant torque equal to NBIA

A moving coil instrument of resistance 5 Ohm requires a potential difference of 75 mV to give a full scale...

Description : A moving coil instrument of resistance 5 Ohm requires a potential difference of 75 mV to give a full scale deflection. The value of shunt resistance needed to give a full scale deflection at 30 A is

Last Answer : A moving coil instrument of resistance 5 Ohm requires a potential difference of 75 mV to give a full scale deflection. The value of shunt resistance needed to give a full scale deflection at 30 A is 2.5 milliOhm

What is the value of Inductance of a coil that induces 20 V when the current through the coil changes from...

Description : What is the value of Inductance of a coil that induces 20 V when the current through the coil changes from 12 to 20 A in 2 seconds? A. 2 H B. 3 H C. 4 H D. 5 H 

Last Answer : 5 H is the value of Inductance of a coil that induces 20 V when the current through the coil changes from 12 to 20 A in 2 seconds.

When field is parallel to plane of area, magnetic flux through coil isA. zeroB. infiniteC. 2D. 5

Description : When field is parallel to plane of area, magnetic flux through coil isA. zero B. infinite C. 2 D. 5

Last Answer : zero

Sum of e.m.f around any loop equals A. sum of current B. sum of potential difference C. sum of resistances D. sum of charges passing through it per second

Description : Sum of e.m.f around any loop equals A. sum of current B. sum of potential difference C. sum of resistances D. sum of charges passing through it per second

Last Answer : sum of potential difference

A voltmeter arranged across the power supply measures A. potential difference B. e.m.f C. current D. resistance

Description : A voltmeter arranged across the power supply measures A. potential difference B. e.m.f C. current D. resistance

Last Answer : e.m.f

Current in a circuit depends on A. resistance B. potential difference C. both A and B D. e.m.f

Description : Current in a circuit depends on A. resistance B. potential difference C. both A and B D. e.m.f

Last Answer : potential difference

Energy transferred per unit charge is A. e.m.f B. current C. potential difference D. conventional current

Description : Energy transferred per unit charge is A. e.m.f B. current C. potential difference D. conventional current

Last Answer : potential difference

A current of 2 A is made to flow through a coil which has only one turn. The magnetic field produced at the centre is`4pi xx 10^(-6) "Wb"//m^(2).` the

Description : A current of 2 A is made to flow through a coil which has only one turn. The magnetic field produced at the centre is`4pi xx 10^(-6) "Wb"//m^(2).` the

Last Answer : A current of 2 A is made to flow through a coil which has only one turn. The magnetic field produced at the centre is` ... m` C. `0.1 m` D. `0.001 m`

A 100 turns coil shown in figure carries a current of 2 amp in a magnetic field `B=0.2 Wb//m^(2)`. The torque acting on the coil is

Description : A 100 turns coil shown in figure carries a current of 2 amp in a magnetic field `B=0.2 Wb//m^(2)`. The torque acting on the coil is

Last Answer : A 100 turns coil shown in figure carries a current of 2 amp in a magnetic field `B=0.2 Wb//m^( ... N-m` tending to rotate the side AD into of the page

The magnetic field intensity at the centre of a current carrying coil of diameter J m is K. The current flowing

Description : The magnetic field intensity at the centre of a current carrying coil of diameter J m is K. The current flowing in the coil is

Last Answer : The magnetic field intensity at the centre of a current carrying coil of diameter d m is H. The current flowing in the coil is dH

Assertion A beam of electron can pass undeflected through a region of E and B. Reason Force on moving charged particle due to magnetic field may be ze

Description : Assertion A beam of electron can pass undeflected through a region of E and B. Reason Force on moving charged particle due to magnetic field may be ze

Last Answer : Assertion A beam of electron can pass undeflected through a region of E and B. Reason Force on ... to magnetic field may be zero in some cases.

The main difference between a motor control circuit containing low voltage protection and low voltage release is that the latter contains _____________. A. a magnetic operating coil B. normally open line contacts C. thermal-overload protection D. a momentary-contact start button

Description : The main difference between a motor control circuit containing low voltage protection and low voltage release is that the latter contains _____________. A. a magnetic operating coil B. normally open line contacts C. thermal-overload protection D. a momentary-contact start button

Last Answer : Answer: D

An electron is moving in a circular path under the influence fo a transerve magnetic field of `3.57xx10^(-2)T`. If the value of `e//m` is `1.76xx10^(1

Description : An electron is moving in a circular path under the influence fo a transerve magnetic field of `3.57xx10^(-2)T`. If the value of `e//m` is `1.76xx10^(1

Last Answer : An electron is moving in a circular path under the influence fo a transerve magnetic field of `3.57xx10^(-2)T`. ... MHz` C. `62.8 MHz` D. `6.28MHz`

A proton of mass m and charge q is moving in a plane with kinetic energy E. if there exists a uniform magnetic field B, perpendicular to the plane mot

Description : A proton of mass m and charge q is moving in a plane with kinetic energy E. if there exists a uniform magnetic field B, perpendicular to the plane mot

Last Answer : A proton of mass m and charge q is moving in a plane with kinetic energy E. if there exists a uniform magnetic ... Em))/(2qB)` D. `(sqrt(2Eq))/(qB)`

An electron is moving on a circular path of radius `r` with speed `v` in a transverse magnetic field B. e/m for it will be

Description : An electron is moving on a circular path of radius `r` with speed `v` in a transverse magnetic field B. e/m for it will be

Last Answer : An electron is moving on a circular path of radius `r` with speed `v` in a transverse magnetic field B. e/m for it ... /Br` B. `B/rv` C. Brv D. `vr/B`

If a secondary coil has 40 turns, and, a primary coil with 20 turns is charged with 50 V of potential difference, then the potential difference in the secondary coil would be A. 50 V in secondary coil B. 25 V in secondary coil C. 60 V in secondary coil D. 100 V in secondary coil

Description :  If a secondary coil has 40 turns, and, a primary coil with 20 turns is charged with 50 V of potential difference, then the potential difference in the secondary coil would be A. 50 V in secondary coil B. 25 V in secondary coil C. 60 V in secondary coil D. 100 V in secondary coil

Last Answer : 100 V in secondary coil

In order to keep a body moving in a circle, there exists a force on it that is directed toward the center of the circle. This force is known aA. Centrifugal force B. Centripetal force C. Gravitational Force D. magnetic forces

Description :  In order to keep a body moving in a circle, there exists a force on it that is directed toward the center of the circle. This force is known asA. Centrifugal force B. Centripetal force C. Gravitational Force D. magnetic force

Last Answer : Centripetal force

Moving electric charge produces - (1) magnetic field (2) sound waves (3) light rays (4) heat waves

Description : Moving electric charge produces - (1) magnetic field (2) sound waves (3) light rays (4) heat waves

Last Answer : (1) magnetic field Explanation: An electric charge always produces an electric field, regardless of speed, and a moving charge generates a magnetic field. An electric current passing through a conductor produces a magnetic field because it has many charges in motion.

An ELECTRON moving horizontally along the +x axis enters a region of space with a horizontal uniform magnetic field pointing in the +y direction. The electron will be deflected: w) -y direction x) +y direction y) -z direction z) +z direction

Description : An ELECTRON moving horizontally along the +x axis enters a region of space with a horizontal uniform magnetic field pointing in the +y direction. The electron will be deflected: w) -y direction x) +y direction y) -z direction z) +z direction

Last Answer : ANSWER: Y -- -Z DIRECTION

An electron and a proton are moving at the same speed in circular paths in the same uniform magnetic field. The radius of the path of the proton is one of the following. Is this radius: w) the same as that of the electron x) about 2000 times larger than that of the electron y) a little larger than that of the electron z) smaller than that of the electron

Description : An electron and a proton are moving at the same speed in circular paths in the same uniform magnetic field. The radius of the path of the proton is one of the following. Is this radius: w) the same ... of the electron y) a little larger than that of the electron z) smaller than that of the electron

Last Answer : ANSWER: X -- ABOUT 2000 TIMES LARGER THAN THAT OF THE ELECTRON

A charged particle is moving in a UNIFORM magnetic field. If the direction of motion of the charged particle is at right angles to the magnetic field, describe the shape of the charged particle's path.

Description : A charged particle is moving in a UNIFORM magnetic field. If the direction of motion of the charged particle is at right angles to the magnetic field, describe the shape of the charged particle's path.

Last Answer : ANSWER: CIRCULAR or CIRCLE

The greatest induced EMF will occur in a straight wire moving at constant speed through a uniform magnetic field when the angle between the direction of the wire's motion and the direction of the magnetic field is w) 0 degrees x) 30 degrees y) 60 degrees z) 90 degrees

Description : The greatest induced EMF will occur in a straight wire moving at constant speed through a uniform magnetic field when the angle between the direction of the wire's motion and the direction of the magnetic field is w) 0 degrees x) 30 degrees y) 60 degrees z) 90 degrees

Last Answer : ANSWER: Z -- 90 DEGREES

A charged particle is moving in a UNIFORM magnetic field. If the direction of motion of the charged particle is parallel to the magnetic field, describe the shape of the charged particle's path.

Description : A charged particle is moving in a UNIFORM magnetic field. If the direction of motion of the charged particle is parallel to the magnetic field, describe the shape of the charged particle's path. 

Last Answer : ANSWER: STRAIGHT LINE

Moving electric charge produces : (1) magnetic field (2) sound waves (3) light rays (4) heat waves

Description : Moving electric charge produces : (1) magnetic field (2) sound waves (3) light rays (4) heat waves

Last Answer : magnetic field

A moving particle of charge q and mass m enters a uniform magnetic field perpendicular to the direction of field. Then

Description : A moving particle of charge q and mass m enters a uniform magnetic field perpendicular to the direction of field. Then

Last Answer : A moving particle of charge q and mass m enters a uniform magnetic field perpendicular to the ... circular path (D) its velocity vector changes

E.M.F can be induced in a circuit by A. changing magnetic flux density B. changing area of circuit C. changing the angle D. all of above

Description : E.M.F can be induced in a circuit by A. changing magnetic flux density B. changing area of circuit C. changing the angle D. all of above

Last Answer : all of above

Assertion : The level of FSH & LH attain a peak level in the middle of the menstrual cycle . Reason : The FSH & LH surge induces rupture of Graafian f

Description : Assertion : The level of FSH & LH attain a peak level in the middle of the menstrual cycle . Reason : The FSH & LH surge induces rupture of Graafian f

Last Answer : Assertion : The level of FSH & LH attain a peak level in the middle of the menstrual cycle . Reason ... . D. If both Assertion & Reason are False.

F = BIL can only be used if the magnetic field and electric current are A. at right angles to each other B. in same direction C. anti-parallel to each other D. anti-perpendicular to each other

Description : F = BIL can only be used if the magnetic field and electric current are A. at right angles to each other B. in same direction C. anti-parallel to each other D. anti-perpendicular to each other

Last Answer : at right angles to each other

A moving coil galvanometer has 150 equal divisions. Its current sensitivity is 10-divisions per milliampere and voltage sensitivity is 2 divisions per

Description : A moving coil galvanometer has 150 equal divisions. Its current sensitivity is 10-divisions per milliampere and voltage sensitivity is 2 divisions per

Last Answer : A moving coil galvanometer has 150 equal divisions. Its current sensitivity is 10-divisions per milliampere and voltage ... `10^(3)` D. `10^(5)`

What is the typical full-scale voltage across a moving coil voltmeter?

Description : What is the typical full-scale voltage across a moving coil voltmeter?

Last Answer : 50mV

A permanent magnet moving coil instrument gives full scale deflection of 25mA when a voltage of 75mV is applied across it. Calculate: (i) Resistance of shunt required for full scale deflection of 150 A. (ii) Series resistance for full scale deflection of 500 V.

Description : A permanent magnet moving coil instrument gives full scale deflection of 25mA when a voltage of 75mV is applied across it. Calculate: (i) Resistance of shunt required for full scale deflection of 150 A. (ii) Series resistance for full scale deflection of 500 V.

Last Answer : Answer :

A moving coil meter has a resistance of 3 Ω and gives full scale deflection with 30 mA. To measure voltage up

Description : A moving coil meter has a resistance of 3 Ω and gives full scale deflection with 30 mA. To measure voltage up to 300 V, the external resistance to be connected in series with the instrument is (A) 9997 Ω (B) 10000 Ω (C) 997 Ω (D) 10003 Ω

Last Answer : A moving coil meter has a resistance of 3 Ω and gives full scale deflection with 30 mA. To measure voltage up to 300 V, the external resistance to be connected in series with the instrument is 9997 Ω

The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is

Description : The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is 220 V. With the potential coil connected on the load side, the meter indicates 100 W. Approximate percentage error due to wattmeter connection is (A) 11% (B) 9% (C) 1.1% (D) 3%

Last Answer : The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is 220 V. With the potential coil connected on the load side, the meter indicates 100 W. Approximate percentage error due to wattmeter connection is 11%