If a secondary coil has 40 turns, and, a primary coil with 20 turns is charged with 50 V of potential difference, then the potential difference in the secondary coil would be A. 50 V in secondary coil B. 25 V in secondary coil C. 60 V in secondary coil D. 100 V in secondary coil

 If a secondary coil has 40 turns, and, a primary coil with 20 turns is

charged with 50 V of potential difference, then the potential difference in the

secondary coil would be

A. 50 V in secondary coil

B. 25 V in secondary coil

C. 60 V in secondary coil

D. 100 V in secondary coil
by

1 Answer

Answer :

100 V in secondary coil
by

Related questions

A transformer steps down 220V to 40 volts. If the secondary turns are 40 then primary turns will be: a. 20 b. 40 c. 120 d. 220

Description : A transformer steps down 220V to 40 volts. If the secondary turns are 40 then primary turns will be: a. 20 b. 40 c. 120 d. 220

Last Answer : d. 220V

The primary coil of a transformer is connected to a 60 V ac source. The secondary coil is connected to a 330

Description : The primary coil of a transformer is connected to a 60 V ac source. The secondary coil is connected to a 330 ohms load. The turns ratio is 3:1. What is the secondary voltage? A.2 V B.20 V C.180 V D.18 V

Last Answer : The primary coil of a transformer is connected to a 60 V ac source. The secondary coil is connected to a 330 ohms load. The turns ratio is 3:1. What is the secondary voltage? A.2 V B.20 V C.180 V D.18 V

When the turns ratio of a transformer is 20 and the primary ac voltage is 12 V, the secondary voltage is?

Description : When the turns ratio of a transformer is 20 and the primary ac voltage is 12 V, the secondary voltage is? A.12 V B.120 V C.240 V D.2,400 V

Last Answer : When the turns ratio of a transformer is 20 and the primary ac voltage is 12 V, the secondary voltage is? A.12 V B.120 V C.240 V D.2,400 V

The normal value of over flow rates for plain primary sedimentation tanks, ranges between A. 25,000 to 35,000 litres/sqm/day B. 40,000 to 50,000 litres/sqm/day C. 50,000 to 60,000 litres/sqm/day D. 80,000 to 100,000 litres/sqm/day

Description : The normal value of over flow rates for plain primary sedimentation tanks, ranges between A. 25,000 to 35,000 litres/sqm/day B. 40,000 to 50,000 litres/sqm/day C. 50,000 to 60,000 litres/sqm/day D. 80,000 to 100,000 litres/sqm/day

Last Answer : ANS: B

Transmission voltage of ll kV is normally used for distances upto (a) 20—25 km (b) 40—50 km (c) 60—70 km (d) 80—100 km

Description : Transmission voltage of ll kV is normally used for distances upto (a) 20—25 km (b) 40—50 km (c) 60—70 km (d) 80—100 km

Last Answer : (a) 20—25 km

The primary winding of a 220/6 V, 50 Hz transformer is energised from 110 V, 60 Hz supply. The secondary output voltage will be (A) 3.6 V. (B) 2.5 V. (C) 3.0 V. (D) 6.0 V.

Description : The primary winding of a 220/6 V, 50 Hz transformer is energised from 110 V, 60 Hz supply. The secondary output voltage will be (A) 3.6 V. (B) 2.5 V. (C) 3.0 V. (D) 6.0 V.

Last Answer : (C) 3.0 V.

The primary winding of a 220/6 V, 50 Hz transformer is energised from 110 V, 60 Hz supply. The secondary

Description : The primary winding of a 220/6 V, 50 Hz transformer is energised from 110 V, 60 Hz supply. The secondary output voltage will be (A) 3.6 V. (B) 2.5 V. (C) 3.0 V. (D) 6.0 V.

Last Answer : The primary winding of a 220/6 V, 50 Hz transformer is energised from 110 V, 60 Hz supply. The secondary output voltage will be 3.0 V.

The primary winding of a 220/6 V, 50 Hz transformer is energised from 110 V, 60 Hz supply. The secondary ...

Description : The primary winding of a 220/6 V, 50 Hz transformer is energised from 110 V, 60 Hz supply. The secondary output voltage will be; (A) 3.6 (B) 2.5 V (C) 3.0 V (D) 6.0 V

Last Answer : The primary winding of a 220/6 V, 50 Hz transformer is energised from 110 V, 60 Hz supply. The secondary output voltage will be: 3.0 V

In potential transformers, the secondary turns are increased slightly and the primary and secondary windings...

Description : In potential transformers, the secondary turns are increased slightly and the primary and secondary windings are wound as closely as possible to compensate for  (a) Phase angle and ratio error, ... loss and hysteresis loss, respectively  (d) The hysteresis loss and eddy current loss, respectively

Last Answer : In potential transformers, the secondary turns are increased slightly and the primary and secondary windings are wound as closely as possible to compensate for Ratio and phase angle error, respectively 

The normal values of over flow rates for secondary sedimentation tanks, ranges between A. 25,000 to 35,000 litres/sqm/day B. 40,000 to 50,000 litres/sqm/day C. 50,000 to 60,000 litres/sqm/day D. 80,000 to 10,000 litres/sqm/day

Description : The normal values of over flow rates for secondary sedimentation tanks, ranges between A. 25,000 to 35,000 litres/sqm/day B. 40,000 to 50,000 litres/sqm/day C. 50,000 to 60,000 litres/sqm/day D. 80,000 to 10,000 litres/sqm/day

Last Answer : ANS: A

Turn ratio of a transformer is 5. If 220 V AC is applied to its primary coil, voltage in the secondary coil will be: a. 44V b. 4.4 V c. 220V d. 1100V

Description : Turn ratio of a transformer is 5. If 220 V AC is applied to its primary coil, voltage in the secondary coil will be: a. 44V b. 4.4 V c. 220V d. 1100V

Last Answer : c. 220V

A transformer has a turns ratio of two to one. If a 100 ohm resistor is connected on the high side, its resistance as measured on the low side would be: w) 25 ohms x) 50 ohms y) 100 ohms z) 400 ohms

Description : A transformer has a turns ratio of two to one. If a 100 ohm resistor is connected on the high side, its resistance as measured on the low side would be: w) 25 ohms x) 50 ohms y) 100 ohms z) 400 ohms

Last Answer : ANSWER: W -- 25 OHMS

Energy stored in a 2000 mF capacitor charged to a potential difference of 10 V is A. 0.12 J B. 1.3 J C. 0.10 J D. 3 J

Description : Energy stored in a 2000 mF capacitor charged to a potential difference of 10 V is A. 0.12 J B. 1.3 J C. 0.10 J D. 3 J

Last Answer : 0.10 J

Find the potential of the function V = 60cos θ/r at the point P(3, 60, 25). a) 20 b) 10 c) 30 d) 60

Description : Find the potential of the function V = 60cos θ/r at the point P(3, 60, 25). a) 20 b) 10 c) 30 d) 60

Last Answer : b) 10

If a transformer has 50 turns in the primary winding and 10 turns in the secondary winding,

Description : If a transformer has 50 turns in the primary winding and 10 turns in the secondary winding, what is the reflective resistance if the secondary load resistance is 250 ohms? A.250 ohms B.25 ohms C.6,250 ohms D.62,500 ohms

Last Answer : 6,250 ohms

A certain transformer has 200 turns in the primary winding, 50 turns in the secondary winding and 120 volts

Description : A certain transformer has 200 turns in the primary winding, 50 turns in the secondary winding and 120 volts applied to the primary. What is the voltage across the secondary?  (A) 30 Volts (B) 480 Volts (C) 120 Volts (D) 60 Volts

Last Answer : A certain transformer has 200 turns in the primary winding, 50 turns in the secondary winding and 120 volts applied to the primary. What is the voltage across the secondary?  (A) 30 Volts (B) 480 Volts (C) 120 Volts (D) 60 Volts

Calculate the emf of a coil with turns 100 and flux rate 5 units. a) 20 b) -20 c) 500 d) -500

Description : Calculate the emf of a coil with turns 100 and flux rate 5 units. a) 20 b) -20 c) 500 d) -500

Last Answer : d) -500

The doorbell on your house requires a 12 volt alternating current. A transformer having a primary winding of 1,600 turns is to be used to step down your house's 110-volt alternating current. How many turns are there on the secondary winding?

Description : The doorbell on your house requires a 12 volt alternating current. A transformer having a primary winding of 1,600 turns is to be used to step down your house's 110-volt alternating current. How many turns are there on the secondary winding?

Last Answer : ANSWER: 175 TURNS 

29. In transformer terminology, the ratio 20:1 indicates that A. there are 20 turns on primary one turn on secondary B. secondary voltage is 1/20th of the primary C. primary current is 20 times greater than the secondary current D. for every 0 turns on primary, there is one turn on secondary

Description : 29.In transformer terminology, the ratio 20:1 indicates that A. there are 20 turns on primary one turn on secondary B. secondary voltage is 1/20th of the primary C. primary current is 20 times greater than the secondary current D. for every 0 turns on primary, there is one turn on secondary

Last Answer : A. there are 20 turns on primary one turn on secondary

The normal values of over flow rates for sedimentation tanks using coagulant, ranges between A. 25,000 to 35,000 litres/sqm/day B. 40,000 to 50,000 litres/sqm/day C. 50,000 to 60,000 litres/sqm/day D. 80,000 to 100,000 litres/sqm/day

Description : The normal values of over flow rates for sedimentation tanks using coagulant, ranges between A. 25,000 to 35,000 litres/sqm/day B. 40,000 to 50,000 litres/sqm/day C. 50,000 to 60,000 litres/sqm/day D. 80,000 to 100,000 litres/sqm/day

Last Answer : ANS: C

The primary turns of a 444 V/222 V, 50 Hz single-phase transformer with a core cross- sectional area of...

Description : The primary turns of a 444 V/222 V, 50 Hz single-phase transformer with a core cross-sectional area of 100 cm2, and a maximum flux density of 1.0 T is (A) 100 (B) 200 (C) 222 (D) 400

Last Answer : The primary turns of a 444 V/222 V, 50 Hz single-phase transformer with a core cross-sectional area of 100 cm2, and a maximum flux density of 1.0 T is 200

The profit of a company (whose capital is divided into 25‚000 shares of Rs. 10 each) for the last three years are : Rs. 50‚000; Rs. 60‚000 and Rs. 40‚000. The fair return on investment is taken at 10% p.a. The value of company’s share will be– (A) Rs. 10 (B) Rs. 20 (C) Rs. 30 (D) Rs. 40

Description : The profit of a company (whose capital is divided into 25‚000 shares of Rs. 10 each) for the last three years are : Rs. 50‚000; Rs. 60‚000 and Rs. 40‚000. The fair return on investment is taken at 10% p.a. The value of company’s share will be– (A) Rs. 10 (B) Rs. 20 (C) Rs. 30 (D) Rs. 40

Last Answer : Answer: Rs. 20

The percentage of chlorine in fresh bleaching powder is roughly (A) 50 to 60 (B) 30 to 35 (C) 40 to 50 (D) 20 to 25

Description : The percentage of chlorine in fresh bleaching powder is roughly (A) 50 to 60 (B) 30 to 35 (C) 40 to 50 (D) 20 to 25

Last Answer : (B) 30 to 35

P and Q can do a piece of job in 24 days; Q and R can do it in 30 days while R and P can finish it in 40 days. If P, Q, Rworks together, in how many days will they finish the job? In how many days will each one of them finish it, working alone? A) 15,25,35,45 B) 20,30,40,120 C) 20,30,40,50 D) 20,25,30,60

Description : P and Q can do a piece of job in 24 days; Q and R can do it in 30 days while R and P can finish it in 40 days. If P, Q, Rworks together, in how many days will they finish the job? In how many days will each ... finish it, working alone? A) 15,25,35,45 B) 20,30,40,120 C) 20,30,40,50 D) 20,25,30,60 

Last Answer : B Time taken by (P + Q) to finish the job = 24days. (P + Q)'s 1 day's job = 1/24 Time taken by (Q +R) to finish the job = 30days. (Q + R)'s 1 day's job = 1/30 Time taken by (R + P) to finish the ... - {(P + Q)'s 1 day's job } = (1/20 -1/24)=1/120 Hence, R alone can finish the job in 120 days.

The required DC voltage for arc welding is- (1) 6 to 9 V (2) 50 to 60 V (3) 200 to 250 V (4) 90 to 100 V

Description : The required DC voltage for arc welding is- (1) 6 to 9 V (2) 50 to 60 V (3) 200 to 250 V (4) 90 to 100 V

Last Answer : (3) 200 to 250 V

The size of a single plant cell is usually within the range of A.10-20μm in diameter and 25-100μm long B.20-40μm in diameter and 100-200μm long C.40-60μm in diameter and 200-300μm long D.60-80μm in diameter and 300-400μm long

Description : The size of a single plant cell is usually within the range of A.10-20μm in diameter and 25-100μm long B.20-40μm in diameter and 100-200μm long C.40-60μm in diameter and 200-300μm long D.60-80μm in diameter and 300-400μm long

Last Answer : B.20-40μm in diameter and 100-200μm long

The size of a single plant cell is usually within the range of A.10-20μm in diameter and 25-100μm long B.20-40μm in diameter and 100-200μm long C.40-60μm in diameter and 200-300μm long D.60-80μm in diameter and 300-400μm long

Description : The size of a single plant cell is usually within the range of A.10-20μm in diameter and 25-100μm long B.20-40μm in diameter and 100-200μm long C.40-60μm in diameter and 200-300μm long D.60-80μm in diameter and 300-400μm long

Last Answer : B.20-40μm in diameter and 100-200μm long

A capacitor and a coil are connected in series. The capacitor is charged and allowed to discharge through the coil. The current that will then flow through the capacitor-coil combination will do one of the following things. Will it: w) flow in one direction, beginning at a maximum and decreasing rapidly to zero x) oscillate indefinitely y) oscillate but diminish steadily to zero z) oscillate at high frequency at first but then at slower frequency

Description : A capacitor and a coil are connected in series. The capacitor is charged and allowed to discharge through the coil. The current that will then flow through the capacitor-coil combination will do ... but diminish steadily to zero z) oscillate at high frequency at first but then at slower frequency  

Last Answer : ANSWER: Y -- OSCILLATE BUT DIMINISH STEADILY TO ZERO

Which of the following statements regarding cash flow patterns (for time periods 0, 1, 2, 3, and 4) is correct? A. The sequence of -Rs.100, Rs.50, Rs.40, Rs.60, and Rs.50 is a non-conventional cash flow pattern B. The sequence of -Rs.100, Rs.600, -Rs.1,100, Rs.600, and Rs.20 potentially has a maximum of two internal rates of return. C. The sequence of +Rs.100, -Rs.1,100, and Rs.1,600 is a conventional cash flow pattern. D. The sequence of -Rs.50, Rs.50, Rs.70, Rs.60, and -Rs.150 potentially has at most two internal rates of return.

Description : Which of the following statements regarding cash flow patterns (for time periods 0, 1, 2, 3, and 4) is correct? A. The sequence of -Rs.100, Rs.50, Rs.40, Rs.60, and Rs.50 is a non-conventional cash ... -Rs.50, Rs.50, Rs.70, Rs.60, and -Rs.150 potentially has at most two internal rates of return.

Last Answer : B. The sequence of -Rs.100, Rs.600, -Rs.1,100, Rs.600, and Rs.20 potentially has a maximum of two internal rates of return.

Find the emf induced in a coil of 60 turns with a flux rate of 3 units. a) -60 b) -180 c) 60 d) 180

Description : Find the emf induced in a coil of 60 turns with a flux rate of 3 units. a) -60 b) -180 c) 60 d) 180

Last Answer : b) -180

Consider the conductor to be a coil of turns 60 and the flux density to be 13.5 units, current 0.12A and area 16units. The torque will be a) 1555.2 b) 1222.5 c) 525.1 d) 255.6

Description : Consider the conductor to be a coil of turns 60 and the flux density to be 13.5 units, current 0.12A and area 16units. The torque will be a) 1555.2 b) 1222.5 c) 525.1 d) 255.6

Last Answer : a) 1555.2

Which of the following statements identifies the difference between the primary windings and the secondary windings of a 2:1 stepdown transformer? A. The secondary windings have twice as much resistance as the primary windings. B. The secondary windings give off twice as much heat as the primary windings. C. The secondary windings require half as much current as the primary windings. D. The secondary windings have half as many turns as the primary windings.

Description : Which of the following statements identifies the difference between the primary windings and the secondary windings of a 2:1 stepdown transformer? A. The secondary windings have twice as much resistance ... primary windings. D. The secondary windings have half as many turns as the primary windings.

Last Answer : Answer: D

Liquid "X" is at equilibrium with its vapor in a cylinder and piston apparatus. When the volume of the space above the liquid is 50 ml and the temperature 25!, the vapor pressure of "X" is 120 torr. What will the vapor pressure of "X" be when the volume above the liquid is 100 ml and the temperature 25!C? Some liquid is always present. w) 30 torr x) 60 torr y) 120 torr z) 240 torr

Description : Liquid "X" is at equilibrium with its vapor in a cylinder and piston apparatus. When the volume of the space above the liquid is 50 ml and the temperature 25!, the vapor pressure of "X" is 120 torr. What will the ... 25!C? Some liquid is always present. w) 30 torr x) 60 torr y) 120 torr z) 240 torr

Last Answer : ANSWER: Y -- 120 TORR

The normal serum concentration of 24,25- dihydroxycholecalciferol in ng/ml is (A) 8–20 (B) 25–50 (C) 1–5 (D) 60–100

Description : The normal serum concentration of 24,25- dihydroxycholecalciferol in ng/ml is (A) 8–20 (B) 25–50 (C) 1–5 (D) 60–100

Last Answer : Answer : C

1. Assume that there are only two goods: A and B In the base year, Quantity Price A 10 $1 B 10 $4 In the current year, Quantity Price A 20 $ 5 B 25 $20 The Consumer Price Index (CPI) for the current year is: a. 50 b. 100 c. 200 d. 500 e. 60

Description : 1. Assume that there are only two goods: A and B In the base year, Quantity Price A 10 $1 B 10 $4 In the current year, Quantity Price A 20 $ 5 B 25 $20 The Consumer Price Index (CPI) for the current year is: a. 50 b. 100 c. 200 d. 500 e. 60

Last Answer : d. 500

A coil of 500 turns is linked with a flux of 25 mwb, when carries a current of 12.5A. Calculate the value of self-inductance.

Description : A coil of 500 turns is linked with a flux of 25 mwb, when carries a current of 12.5A. Calculate the value of self-inductance.

Last Answer : Ans: Self-Inductance: L = NΦ /I = 500 × 25 × 10-3 / 12.5 = 1 H

Find the potential of V = 60sin θ/r 2 at P(3,60,25) a) 5.774 b) 6.774 c) 7.774 d) 8.774

Description : Find the potential of V = 60sin θ/r 2 at P(3,60,25) a) 5.774 b) 6.774 c) 7.774 d) 8.774

Last Answer : a) 5.774

Human beings can hear the sound range between: (1) 10 to 20 decibels (2) 100 to 150 decibels (3) 50 to 60 decibels (4) None of the above

Description : Human beings can hear the sound range between: (1) 10 to 20 decibels (2) 100 to 150 decibels (3) 50 to 60 decibels (4) None of the above

Last Answer : (4) None of the above Explanation: The most accepted sound range of human being is 0 to 120 decibels.

A circular coil of radius `10 cm "and" 100` turns carries a current 1A. What is the magnetic moment of the coil?

Description : A circular coil of radius `10 cm "and" 100` turns carries a current 1A. What is the magnetic moment of the coil?

Last Answer : A circular coil of radius `10 cm "and" 100` turns carries a current 1A. What is the magnetic moment of the coil? A. ... 3,142 A-m^(2)` D. `3 A-m^(2)`

A 100 turns coil shown in figure carries a current of 2 amp in a magnetic field `B=0.2 Wb//m^(2)`. The torque acting on the coil is

Description : A 100 turns coil shown in figure carries a current of 2 amp in a magnetic field `B=0.2 Wb//m^(2)`. The torque acting on the coil is

Last Answer : A 100 turns coil shown in figure carries a current of 2 amp in a magnetic field `B=0.2 Wb//m^( ... N-m` tending to rotate the side AD into of the page

A current of `0.1 A` circulates around a coil of 100 turns and having a radius equal to `5 cm`. The magnetic field set up at the centre of the coil is

Description : A current of `0.1 A` circulates around a coil of 100 turns and having a radius equal to `5 cm`. The magnetic field set up at the centre of the coil is

Last Answer : A current of `0.1 A` circulates around a coil of 100 turns and having a radius equal to `5 cm`. The magnetic ... C. `4pixx10^(-5)T` D. `2pixx10^(-5)T`

Calculate the emf when a coil of 100 turns is subjected to a flux rate of 0.3 tesla/sec. a) 3 b) 30 c) -30 d) -300

Description : Calculate the emf when a coil of 100 turns is subjected to a flux rate of 0.3 tesla/sec. a) 3 b) 30 c) -30 d) -300

Last Answer : c) -30

Find the inductance of a coil with permeability 3.5, turns 100 and length 2m. Assume the area to be thrice the length. a) 131.94mH b) 94.131mH c) 131.94H d) 94.131H

Description : Find the inductance of a coil with permeability 3.5, turns 100 and length 2m. Assume the area to be thrice the length. a) 131.94mH b) 94.131mH c) 131.94H d) 94.131H

Last Answer : a) 131.94mH

A 100 turn coil has an inductance of 6 mH. If the number of turns is increased to 200, all other quantities

Description : A 100 turn coil has an inductance of 6 mH. If the number of turns is increased to 200, all other quantities remaining the same, the inductance will be:

Last Answer : A 100 turn coil has an inductance of 6 mH. If the number of turns is increased to 200, all other quantities remaining the same, the inductance will be: 24 mH

A moving coil of meter has 100 turns, and a length and depth of 10mm and 20mm respectively. It is positioned

Description : A moving coil of meter has 100 turns, and a length and depth of 10mm and 20mm respectively. It is positioned in a uniform radial flux density of 200 mT. The coil carrier current capacity is 50 mA. The torque on the coil is

Last Answer : A moving coil of meter has 100 turns, and a length and depth of 10mm and 20mm respectively. It is positioned in a uniform radial flux density of 200 mT. The coil carrier current capacity is 50 mA. The torque on the coil is 200µNm

Consider a fuzzy set old as defined below Old = {(20, 0.1), (30, 0.2), (40, 0.4), (50, 0.6), (60, 0.8), (70, 1), (80, 1)} Then the alpha-cut for alpha = 0.4 for the set old will be (A) {(40, 0.4)} (B) {50, 60, 70, 80} (C) {(20, 0.1), (30, 0.2)} (D) {(20, 0), (30, 0), (40, 1), (50, 1), (60, 1), (70, 1), (80, 1)}

Description : Consider a fuzzy set old as defined below Old = {(20, 0.1), (30, 0.2), (40, 0.4), (50, 0.6), (60, 0.8), (70, 1), (80, 1)} Then the alpha-cut for alpha = 0.4 for the set old will be (A) {(40, 0.4)} (B) {50, 60, ... , (30, 0.2)} (D) {(20, 0), (30, 0), (40, 1), (50, 1), (60, 1), (70, 1), (80, 1)}

Last Answer : (D) {(20, 0), (30, 0), (40, 1), (50, 1), (60, 1), (70, 1), (80, 1)}

P,Q, & R can complete a piece of job together in 20 days. All the 3 started working at it together and after 8 days P left. Then Q & R together completed a job in 20 more days. P alone could complete the work in. a) 60 b) 50 c) 40 d) 30

Description : P,Q, & R can complete a piece of job together in 20 days. All the 3 started working at it together and after 8 days P left. Then Q & R together completed a job in 20 more days. P alone could complete the work in. a) 60 b) 50 c) 40 d) 30

Last Answer : B Work done by P,Q & R in 8 days = 1/20 * 8 =2/5 Remaining work = (1 - 2/5) = 3/5 Now 3/5 work is done by Q & R in 20 days Whole work will be done by Q & R in(20*5/3) =100/3 days (P+Q+R ... (Q+R)'s 1 day work =1/20 - 3/100 =5-3/100 =2/100 =1/50 P alone could complete the work in 50 days..

The amount of commission charged on a Service MO amounting to Rs. 1000/- is (a) Rs. 25/- (b) Rs.50/- (c) Rs. 100/- (d) NIL

Description : The amount of commission charged on a Service MO amounting to Rs. 1000/- is (a) Rs. 25/- (b) Rs.50/- (c) Rs. 100/- (d) NIL

Last Answer : (d) NIL

The energy dissipated when a car hits a tree at 70 miles per hour is ABOUT how much greater than that dissipated at 50 miles per hour? w) 20 percent x) 40 percent y) 70 percent z) 100 percent

Description : The energy dissipated when a car hits a tree at 70 miles per hour is ABOUT how much greater than that dissipated at 50 miles per hour? w) 20 percent x) 40 percent y) 70 percent z) 100 percent

Last Answer : ANSWER: Z -- 100 PERCENT

When number of turns in a coil is trippled, without any change in the length of coil, its self inductance becomes? (1) Nine times (2) Three times (3) Six times (4) One-third

Description : When number of turns in a coil is trippled, without any change in the length of coil, its self inductance becomes? (1) Nine times (2) Three times (3) Six times (4) One-third

Last Answer : (1) Nine times