What is the typical full-scale voltage across a moving coil voltmeter?

What is the typical full-scale voltage across a moving coil voltmeter?
by

1 Answer

Answer :

50mV
by

Related questions

What is the typical full-scale deflection current of a moving coil instrument?

Description : What is the typical full-scale deflection current of a moving coil instrument?

Last Answer : 50mA

A galvanometer with 20 ohms coil resistence has a full-scale deflection of 10 mA. A 0.02 ohm is placed across the meter to increase its rating capacity. What is the new full scale current for the meter?

Description : A galvanometer with 20 ohms coil resistence has a full-scale deflection of 10 mA. A 0.02 ohm is placed across the meter to increase its rating capacity. What is the new full scale current for the meter?

Last Answer : False.

What is the reason why the scale of a permanent-magnet moving coil instrument is uniform?

Description : What is the reason why the scale of a permanent-magnet moving coil instrument is uniform?

Last Answer : because it is spring controlled

An ammeter has a full-scale deflection current of 100mA. If the same ammeter is used to measure a full-scale current of 1.0ampere, what is the value of the shunt resistor in ohms if the voltage across the meter is 9.0 volts?

Description : An ammeter has a full-scale deflection current of 100mA. If the same ammeter is used to measure a full-scale current of 1.0ampere, what is the value of the shunt resistor in ohms if the voltage across the meter is 9.0 volts?

Last Answer : 10 ohms

An electrostatic voltmeter in which an assembly of figure-8-shaped metal plates rotates between the plates of a stationary assembly when a voltage is applied betweeen the assemblies.

Description : An electrostatic voltmeter in which an assembly of figure-8-shaped metal plates rotates between the plates of a stationary assembly when a voltage is applied betweeen the assemblies.

Last Answer : Kelvin voltmeter

Voltage measurement in a high impedance circuit requires a voltmeter with

Description : Voltage measurement in a high impedance circuit requires a voltmeter with

Last Answer : high input impedance

Which of the voltmeter is used for measuring high direct voltage (say 10kV)?

Description : Which of the voltmeter is used for measuring high direct voltage (say 10kV)?

Last Answer : electrostatic

A permanent magnet moving coil instrument gives full scale deflection of 25mA when a voltage of 75mV is applied across it. Calculate: (i) Resistance of shunt required for full scale deflection of 150 A. (ii) Series resistance for full scale deflection of 500 V.

Description : A permanent magnet moving coil instrument gives full scale deflection of 25mA when a voltage of 75mV is applied across it. Calculate: (i) Resistance of shunt required for full scale deflection of 150 A. (ii) Series resistance for full scale deflection of 500 V.

Last Answer : Answer :

A small swamping resistance is connected in series with operating coil of a moving coil ammter in order to compensate for the effects of ____

Description : A small swamping resistance is connected in series with operating coil of a moving coil ammter in order to compensate for the effects of ____

Last Answer : temperature variation

In a moving coil ammeter, a ___ is connected in series with the coil to compensate for temperature variations

Description : In a moving coil ammeter, a ___ is connected in series with the coil to compensate for temperature variations

Last Answer : swamping resistors

Current range extension in moving coil instruments can be achieved by placing a ___ in shunt with the instrument.

Description : Current range extension in moving coil instruments can be achieved by placing a ___ in shunt with the instrument.

Last Answer : low resistance resistor

Permanent-magnet moving coil instrument can be used in

Description : Permanent-magnet moving coil instrument can be used in

Last Answer : dc work only

Meters with moving coil are normally used for measuring ____

Description : Meters with moving coil are normally used for measuring ____

Last Answer : dc only

A sensing element that provides a dc voltage less than 10mV with typical power range of 0.1 to 100mW

Description : A sensing element that provides a dc voltage less than 10mV with typical power range of 0.1 to 100mW

Last Answer : thermal converters

Moving-iron instrument has a/an scale

Description : Moving-iron instrument has a/an scale

Last Answer : squared

How much current does an electrostatic voltmeter require through it to operate?

Description : How much current does an electrostatic voltmeter require through it to operate?

Last Answer : zero current

Calculate the series resistance needed to convert a D' Arsonval meter with FSD of 100uA and a meter resistance of 1kohm to a voltmeter with 10V FSD.

Description : Calculate the series resistance needed to convert a D' Arsonval meter with FSD of 100uA and a meter resistance of 1kohm to a voltmeter with 10V FSD.

Last Answer : Rs=10V/100uA - 1kohm = 99kohm

Error in voltmeter is due to ___

Description : Error in voltmeter is due to ___

Last Answer : loading

High sensitive DC voltmeter provides accurate reading when measuring ___ circuits.

Description : High sensitive DC voltmeter provides accurate reading when measuring ___ circuits.

Last Answer : high resistance

High sensitive DC voltmeter provides accurate reading when measuring ___ circuits.

Description : High sensitive DC voltmeter provides accurate reading when measuring ___ circuits.

Last Answer : high resistance

A Kelvin electrostatic voltmeter uses what method of damping?

Description : A Kelvin electrostatic voltmeter uses what method of damping?

Last Answer : fluid friction

In order to make an accurate measurement as possible, the internal resistance of a voltmeter must be

Description : In order to make an accurate measurement as possible, the internal resistance of a voltmeter must be

Last Answer : as high as possible

What should be the resolution of a digital voltmeter having three digit 0-3V?

Description : What should be the resolution of a digital voltmeter having three digit 0-3V?

Last Answer : 3mV

How can electric currents be induced with a coil and a magnet?

Description : How can electric currents be induced with a coil and a magnet?

Last Answer : by moving either the magnet or the coil

It is the reciprocal of the full-scale current of a meter

Description : It is the reciprocal of the full-scale current of a meter

Last Answer : sensitivity

A meter has a full-scale current of 50uA, what is its sensitivity?

Description : A meter has a full-scale current of 50uA, what is its sensitivity?

Last Answer : Is=1/50uA=20kohm/V

A moving coil meter has a resistance of 3 Ω and gives full scale deflection with 30 mA. To measure voltage up

Description : A moving coil meter has a resistance of 3 Ω and gives full scale deflection with 30 mA. To measure voltage up to 300 V, the external resistance to be connected in series with the instrument is (A) 9997 Ω (B) 10000 Ω (C) 997 Ω (D) 10003 Ω

Last Answer : A moving coil meter has a resistance of 3 Ω and gives full scale deflection with 30 mA. To measure voltage up to 300 V, the external resistance to be connected in series with the instrument is 9997 Ω

A galvanometer has a coil of resistance `100 Omega` and gives a full-scale deflection for `30 mA` current. If it is to work as a voltmeter of `30 V` r

Description : A galvanometer has a coil of resistance `100 Omega` and gives a full-scale deflection for `30 mA` current. If it is to work as a voltmeter of `30 V` r

Last Answer : A galvanometer has a coil of resistance `100 Omega` and gives a full-scale deflection for `30 mA` current. ... Omega` C. `1000 Omega` D. `1800 Omega`

What sensor provides a change of resistance with typical power range of 1uW to 10mW and with maximum frequency greater than 100GHz

Description : What sensor provides a change of resistance with typical power range of 1uW to 10mW and with maximum frequency greater than 100GHz

Last Answer : thermistor sensor

What is the typical power range for thermocouple sensors?

Description : What is the typical power range for thermocouple sensors?

Last Answer : 0.1uW to 100mW

For amplitude measurements, ___ scale is calibrated in either volts per centimeter (V/cm), or millivolts per centimeter (mV/cm)

Description : For amplitude measurements, ___ scale is calibrated in either volts per centimeter (V/cm), or millivolts per centimeter (mV/cm)

Last Answer : vertical

The scale of a hot-wire instrument is a/an ___function

Description : The scale of a hot-wire instrument is a/an ___function

Last Answer : squared

Most AC voltmeters have an rms scale which is valid only if the input signal being measured is a __ signal.

Description : Most AC voltmeters have an rms scale which is valid only if the input signal being measured is a __ signal.

Last Answer : sinusoidal

Type of power-line frequency meter device utilizing a principle of balancing an indicator needle at center of a scale using magnetic fields opposing each other.

Description : Type of power-line frequency meter device utilizing a principle of balancing an indicator needle at center of a scale using magnetic fields opposing each other.

Last Answer : magnetic type

For time measurements, ___ scale of the scope is used.

Description : For time measurements, ___ scale of the scope is used.

Last Answer : horizontal

Indicating instrument is assumed to be most accurate at what part of the scale?

Description : Indicating instrument is assumed to be most accurate at what part of the scale?

Last Answer : at half or full

On a simple ohmmeter, the 0 ohm(s0 mark is located __ of the scale

Description : On a simple ohmmeter, the 0 ohm(s0 mark is located __ of the scale

Last Answer : at far right

In the illustrated motor controller, the motor fails to start. A voltmeter reading between 1 and 6 reads line voltage, while the voltmeter reading between 2 and 6 reads 0 VAC. The problem is __________. EL-0007 A. the control fuse is the wrong amperage not allowing full current to pass through B. the stop switch is open C. an open in the 'M' coil, 'Ma' contact/start switch or overload contacts D. fuse '10a' is blown

Description : In the illustrated motor controller, the motor fails to start. A voltmeter reading between 1 and 6 reads line voltage, while the voltmeter reading between 2 and 6 reads 0 VAC. The problem is __________. EL- ... in the 'M' coil, 'Ma' contact/start switch or overload contacts D. fuse '10a' is blown

Last Answer : Answer: B

As the deflection of the moving system increases, the controlling torque in an indicating instrument.

Description : As the deflection of the moving system increases, the controlling torque in an indicating instrument.

Last Answer : increases

To increase the measuring capability of a moving-iron ac ammeter, a __ should be used.

Description : To increase the measuring capability of a moving-iron ac ammeter, a __ should be used.

Last Answer : different number of turns of coils

A moving system force in an analog instruments which causes the moving system to deflect from its zero position.

Description : A moving system force in an analog instruments which causes the moving system to deflect from its zero position.

Last Answer : deflecting force

A force in analog instrument which quickly brings the moving system to rest in its final position.

Description : A force in analog instrument which quickly brings the moving system to rest in its final position.

Last Answer : damping force

A moving system force in analog instruments which ensures that the deflection of the pointer for a given value of measured quantity always has the same value

Description : A moving system force in analog instruments which ensures that the deflection of the pointer for a given value of measured quantity always has the same value

Last Answer : controlling force

Which of the following forces does not act on the moving systems of analog instruments?

Description : Which of the following forces does not act on the moving systems of analog instruments?

Last Answer : an electrostatic force

To limit the current flow through a DC voltmeter to as low a value as possible, the moving coil circuit is provided with a/an _____________. A. high series resistance B. high parallel resistance C. series inductor D. external shunt

Description : To limit the current flow through a DC voltmeter to as low a value as possible, the moving coil circuit is provided with a/an _____________. A. high series resistance B. high parallel resistance C. series inductor D. external shunt

Last Answer : Answer: A

What is Zener Diode ? What is a voltage Regulator ?

Description : What is Zener Diode ? What is a voltage Regulator ?

Last Answer : The breakdown region of a p n diode can be made very sharp and almost vertical Diodes with almost vertical breakdown region are known as Zever Diodes. A Zener diodes operating in the breakdown ... VOLTAGE REGULATOR : The output remains constant despite changes in input voltage due to Zever effect.  

What is the constant voltage unit ?

Description : What is the constant voltage unit ?

Last Answer : The constant voltage circuit consists of a rectifier, CR, a filter capacitor C1, followed by two stages of zener regulation. Abridge configuration is provided to 1amp line voltage regulation ... , Thus variations. Resisters R2 and R3 form a bridge that any remoment line voltage effects. 

The only use of voltage senstive meter movement

Description : The only use of voltage senstive meter movement

Last Answer : very low voltage measurement

What kind of voltage is applied to the horizontal deflection plates of the oscilloscope?

Description : What kind of voltage is applied to the horizontal deflection plates of the oscilloscope?

Last Answer : sweep voltage

An electronic measuring device that provide instantaneous visual indication of voltage excursions

Description : An electronic measuring device that provide instantaneous visual indication of voltage excursions

Last Answer : oscilloscope