Moment of force depends upon A. magnitude of force B. perpendicular distance of force from pivot C. both A and B D. axis of rotation

Moment of force depends upon

A. magnitude of force

B. perpendicular distance of force from pivot

C. both A and B

D. axis of rotation


by

1 Answer

Answer :

both A and B


by

Related questions

______ is the perpendicular distance between point of application of force and axis of rotation. (1) Moment arm (2) Moment of Inertia (3) Altitude (4) Base

Description : ______ is the perpendicular distance between point of application of force and axis of rotation. (1) Moment arm (2) Moment of Inertia (3) Altitude (4) Base

Last Answer : (1) Moment arm Explanation: The magnitude of the moment of force acting about a point or axis is directly proportional to the distance of the force from the point or axis.

The rotation axis that is perpendicular to the xy plane and passes through the pivot pointis known as a.Rotation b.Translation c.Scaling d.Shearing

Description : The rotation axis that is perpendicular to the xy plane and passes through the pivot pointis known as a.Rotation b.Translation c.Scaling d.Shearing

Last Answer : a.Rotation

The torque produced by a DC motor armature is the product of the force acting at the armature surface multiplied by _____________. A. work done by the armature in one revolution B. effective armature diameter at which the force acts C. maximum moment arm at the center of rotation of the armature D. perpendicular distance to its center of rotation

Description : The torque produced by a DC motor armature is the product of the force acting at the armature surface multiplied by _____________. A. work done by the armature in one revolution B. effective ... arm at the center of rotation of the armature D. perpendicular distance to its center of rotation

Last Answer : Answer: D

The moment of inertia of a body does not depend upon its – (1) axis of rotation (2) angular velocity (3) form of mass (4) distribution of mass

Description : The moment of inertia of a body does not depend upon its – (1) axis of rotation (2) angular velocity (3) form of mass (4) distribution of mass

Last Answer : (2) angular velocity Explanation: Moment of inertia is the mass property of a rigid body that determines the torque needed for a desired angular acceleration about an axis of rotation. Moment of inertia ... of moments of inertia of the masses making up the whole object, under the same conditions.

The moment of inertia of a body does not depend upon its (1) axis of rotation (2) angular velocity (3) form of mass (4) distribution of mass

Description : The moment of inertia of a body does not depend upon its (1) axis of rotation (2) angular velocity (3) form of mass (4) distribution of mass

Last Answer : angular velocity

The rotational effect of a force on a body about an axis of rotation is described in terms of the (1) Centre of gravity (2) Centripetal force (3) Centrifugal force (4) Moment of force

Description : The rotational effect of a force on a body about an axis of rotation is described in terms of the (1) Centre of gravity (2) Centripetal force (3) Centrifugal force (4) Moment of force

Last Answer : (4) Moment of force Explanation: The rotational effect of a force on a body about an axis of rotation is described in terms of the Moment of force.

The rotational effect of a force on a body about an axis of rotation is described in terms of the (1) Centre of gravity (2) Centripetal force (3) Centrifugal force (4) Moment of force

Description : The rotational effect of a force on a body about an axis of rotation is described in terms of the (1) Centre of gravity (2) Centripetal force (3) Centrifugal force (4) Moment of force

Last Answer : (4) Moment of force Explanation: The rotational effect of a force on a body about an axis of rotation is described in terms of the Moment of force.

A particle is acted upon by a force of constant magnitude which is always perpendicular to the velocity of the particle. The motion of the particle takes place in a plane. It follows that (a) Its velocity is constant (b) Its acceleration is constant (c) Its kinetic energy is constant (d) It moves in a circular path

Description : A particle is acted upon by a force of constant magnitude which is always perpendicular to the velocity of the particle. The motion of the particle takes place in a plane. It follows that (a) Its ... ) Its acceleration is constant (c) Its kinetic energy is constant (d) It moves in a circular path

Last Answer : Ans:(d)

The moment of inertia of a body does not depend upon a.The angular velocity of the body b.Mass of the body c.The distribution of mass in the body d.The axis of rotation of the body e.None of the above

Description : The moment of inertia of a body does not depend upon a.The angular velocity of the body b.Mass of the body c.The distribution of mass in the body d.The axis of rotation of the body e.None of the above

Last Answer : a. The angular velocity of the body

Effect of a force on a body depends upon (A) Magnitude (B) Direction (C) Position or line of action (D) All of the above

Description : Effect of a force on a body depends upon  (A) Magnitude  (B) Direction  (C) Position or line of action  (D) All of the above

Last Answer : (D) All of the above

A column has moment of inertia about X-X and Y-Y axis as follows IXX=4234.4 mm4 IYY=236.3 mm4 This column will buckle about (a) X-X axis (b) Y-Y axis (c) It depends upon the applied load (d) None of these

Description : A column has moment of inertia about X-X and Y-Y axis as follows IXX=4234.4 mm4 IYY=236.3 mm4 This column will buckle about (a) X-X axis (b) Y-Y axis (c) It depends upon the applied load (d) None of these

Last Answer : (b) Y-Y axis

E.M.F for a coil depends upon A. the cross sectional area B. no. of turns of wire C. the magnitude of magnetic flux density D. all of above

Description : E.M.F for a coil depends upon A. the cross sectional area B. no. of turns of wire C. the magnitude of magnetic flux density D. all of above

Last Answer : all of above

The unbalanced force caused by an eccentric mass m rotating at an angular speed v and located at a distance r from the axis of rotation is 2 a. mr ω 2 b. mgω 2 c. mr ω 2

Description : The unbalanced force caused by an eccentric mass m rotating at an angular speed v and located at a distance r from the axis of rotation is 2 a. mr ω 2 b. mgω 2 c. mr ω 2

Last Answer : c. mr ω 2

While rotating the theodolite in the horizontal plane, the bubble of the bubble tube takes up the same position in its tube, it indicates (A) The rotation axis is vertical (B) The trunnion axis is horizontal (C) The line of collimation is perpendicular to vertical axis (D) None of the above

Description : While rotating the theodolite in the horizontal plane, the bubble of the bubble tube takes up the  same position in its tube, it indicates  (A) The rotation axis is vertical  (B) The trunnion ... (C) The line of collimation is perpendicular to vertical axis  (D) None of the above

Last Answer : (A) The rotation axis is vertical

A theodolite is said to be in perfect adjustment if (A) Rotation axis is vertical to the transit axis (B) Transit axis is perpendicular to line of collimation (C) Line of collimation sweeps out a vertical plane while the telescope is elevated or depressed (D) All the above

Description : A theodolite is said to be in perfect adjustment if (A) Rotation axis is vertical to the transit axis (B) Transit axis is perpendicular to line of collimation (C) Line of collimation sweeps out a vertical plane while the telescope is elevated or depressed (D) All the above

Last Answer : (D) All the above

In a theodolite (A) The telescope axis is perpendicular to transit axis (B) The axis of rotation is perpendicular to transit axis (C) The telescope axis, the transit axis and the rotation axis pass through the centre of theodolite (D) All the above

Description : In a theodolite (A) The telescope axis is perpendicular to transit axis (B) The axis of rotation is perpendicular to transit axis (C) The telescope axis, the transit axis and the rotation axis pass through the centre of theodolite (D) All the above

Last Answer : (D) All the above

Clockwise of Anti clockwise rotation about the vertical axis to the perpendicular arm is provided through (A) Shoulder swivel (B) Elbow extension (C) Arm sweep (D) Wrist bend

Description : Clockwise of Anti clockwise rotation about the vertical axis to the perpendicular arm is provided through (A) Shoulder swivel (B) Elbow extension (C) Arm sweep (D) Wrist bend

Last Answer : C

A larger force on a rotating body results in larger _______. (1) Mass (2) Torque (3) Axis of rotation (4) Centre of mass

Description : A larger force on a rotating body results in larger _______. (1) Mass (2) Torque (3) Axis of rotation (4) Centre of mass

Last Answer : (3) Axis of rotation

General pivot point rotation can be expressed as a.T(zr,yr).R(θ).T(-zr,-yr) = R(xr,yr,θ) b.T(xr,yr).R(θ).T(-xr,-yr) = R(xr,yr,θ) c.T(xr,yr).R(θ).T(-xr,-yr) = R(zr,yr,θ) d.T(xr,yr).R(θ).T(-xr,-yr) = R(zr,yr,θ)

Description : General pivot point rotation can be expressed as a.T(zr,yr).R(θ).T(-zr,-yr) = R(xr,yr,θ) b.T(xr,yr).R(θ).T(-xr,-yr) = R(xr,yr,θ) c.T(xr,yr).R(θ).T(-xr,-yr) = R(zr,yr,θ) d.T(xr,yr).R(θ).T(-xr,-yr) = R(zr,yr,θ)

Last Answer : b.T(xr,yr).R(θ).T(-xr,-yr) = R(xr,yr,θ)

Positive values for the rotation angle θ defines a.Counter clockwise rotations about the end points b.Counter clockwise translation about the pivot point c.Counter clockwise rotations about the pivot point d.Negative direction

Description : Positive values for the rotation angle θ defines a.Counter clockwise rotations about the end points b.Counter clockwise translation about the pivot point c.Counter clockwise rotations about the pivot point d.Negative direction

Last Answer : c.Counter clockwise rotations about the pivot point

In prestressed concrete members, the shear force depends upon (a) Distributed load (b) Torsion (c) Concentrated load (d) Variation in net bending moment

Description : In prestressed concrete members, the shear force depends upon (a) Distributed load (b) Torsion (c) Concentrated load (d) Variation in net bending moment

Last Answer : (d) Variation in net bending moment

A satellite is observed to move in a circle about the earth at a constant speed. This means that the force acting upon it is: w) zero x) parallel to the direction of the satellite's instantaneous velocity y) perpendicular to the direction of the satellite's instantaneous velocity z) none of the above

Description : A satellite is observed to move in a circle about the earth at a constant speed. This means that the force acting upon it is: w) zero x) parallel to the direction of the satellite ... velocity y) perpendicular to the direction of the satellite's instantaneous velocity z) none of the above

Last Answer : ANSWER: Y -- PERPENDICULAR TO THE INSTANTANEOUS DIRECTION OF THE SATTELITE’S VELOCITY

A force of 60 N acting perpendicular to a force of 80 N, magnitude of resultant force is 

Description : A force of 60 N acting perpendicular to a force of 80 N, magnitude of resultant force is 

Last Answer : A force of 60 N acting perpendicular to a force of 80 N, magnitude of resultant force is (A) 20N (B) 70N (C) 100 N (D) 140 N

Pick up the incorrect statement from the following. The intensity of horizontal shear stress at the elemental part of a beam section, is directly proportional to (A) Shear force (B) Area of the section (C) Distance of the C.G. of the area from its neutral axis (D) Moment of the beam section about its neutral axis

Description : Pick up the incorrect statement from the following. The intensity of horizontal shear stress at the elemental part of a beam section, is directly proportional to (A) Shear force (B) Area of the section ... . of the area from its neutral axis (D) Moment of the beam section about its neutral axis

Last Answer : Answer: Option D

The magnitude of saturation photo electric current depends upon (a) Frequency (b) Intensity (c) Work function (d) Stopping potential

Description : The magnitude of saturation photo electric current depends upon (a) Frequency (b) Intensity (c) Work function (d) Stopping potential

Last Answer : Ans:(b)

The magnitude of water hammer depends upon the (A) Elastic properties of the pipe material (B) Elastic properties of the liquid flowing through the pipe (C) Speed at which the valve is closed (D) All of the above

Description : The magnitude of water hammer depends upon the (A) Elastic properties of the pipe material (B) Elastic properties of the liquid flowing through the pipe (C) Speed at which the valve is closed (D) All of the above

Last Answer : Answer: Option D

The value of Poison’s ratio depends upon (a) Nature of load, tensile or compressive (b) Magnitude of load (c) Material of the test specimen (d) Dimensions of the test specimen

Description : The value of Poison’s ratio depends upon (a) Nature of load, tensile or compressive (b) Magnitude of load (c) Material of the test specimen (d) Dimensions of the test specimen

Last Answer : (c) Material of the test specimen

Polar moment of inertia is a.Applicable to masses whereas moment of inertia is applicable to area only b.The moment of inertia for an area ralative to a line or axis which is out the plane of area c.Same as moment of inertia d.The moment of inertia for an area relative to a line or axis parallel to the centroidal axis e.The moment of inertia for an area relative to a line or axis perpendicular to the plane of the area

Description : Polar moment of inertia is a.Applicable to masses whereas moment of inertia is applicable to area only b.The moment of inertia for an area ralative to a line or axis which is out the plane of area ... The moment of inertia for an area relative to a line or axis perpendicular to the plane of the area

Last Answer : e. The moment of inertia for an area relative to a line or axis perpendicular to the plane of the area

The moment of inertia of a thin ring about an axis perpendicular to plane of ring is a.1/3 Mr3 b.Mr2 c.Mr d.Mr3 e.1/2 Mr3

Description : The moment of inertia of a thin ring about an axis perpendicular to plane of ring is a.1/3 Mr3 b.Mr2 c.Mr d.Mr3 e.1/2 Mr3

Last Answer : b. Mr2

A vertical column has two moments of inertia (i.e. Ixx and Iyy ). The column will tend to buckle in the direction of the (a) axis of load (b) perpendicular to the axis of load (c) maximum moment of inertia (d) minimum moment of inertia

Description : A vertical column has two moments of inertia (i.e. Ixx and Iyy ). The column will tend to buckle in the direction of the (a) axis of load (b) perpendicular to the axis of load (c) maximum moment of inertia (d) minimum moment of inertia

Last Answer : (d) minimum moment of inertia

Which of the following relations is used to represent theorem of perpendicular axes? (H = Vertical axis, I = Moment of inertia and K = Radius of gyration) a. IPQ = Ixx + AH2 b. IPQ = Ixx + Ak2 c. Izz = Ixx + Iyy d. Izz + Ixx + Iyy = 0

Description : Which of the following relations is used to represent theorem of perpendicular axes? (H = Vertical axis, I = Moment of inertia and K = Radius of gyration) a. IPQ = Ixx + AH2 b. IPQ = Ixx + Ak2 c. Izz = Ixx + Iyy d. Izz + Ixx + Iyy = 0

Last Answer : c. Izz = Ixx + Iyy

State and explain perpendicular axis theorem of moment of Inertia.

Description : State and explain perpendicular axis theorem of moment of Inertia.

Last Answer : Perpendicular axis theorem: It states MI of a plane lamina about an axis perpendicular to the plane of lamina and passing through the centroid of the lamina is equal to the addition of the moments of ... OY are mutually perpendicular and OZ is the axis perpendicular to plane XY of the lamina.

The joint between atlas and axis is called (a) angular joint (b) hinge joint (c) pivot joint (d) saddle joint.

Description : The joint between atlas and axis is called (a) angular joint (b) hinge joint (c) pivot joint (d) saddle joint.

Last Answer : (c) pivot joint

The pivot joint between atlas and axis is a type of (a) cartilaginous joint (b) synovial joint (c) saddle joint (d) fibrous joint.

Description : The pivot joint between atlas and axis is a type of (a) cartilaginous joint (b) synovial joint (c) saddle joint (d) fibrous joint.

Last Answer : b) synovial join

Match the following joints with the bones involved: (1) Gliding joint (i) Between carpal and metacarpal of thumb (2) Hinge joint (ii) Between atlas and axis (3) Pivot joint (iii) Between the carpals (4) Saddle joint (iv) Between humerus and ulna. Select the correct option from the following: (a) (1)-(iii), (2)-(iv), (3)-(ii), (4)-(i) (b) (1)-(iv), (2)-(i), (3)-(ii), (4)-(iii) (c) (1)-(iv), (2)-(ii), (3)-(iii), (4)-(i) (d) (1)-(i), (2)-(iii), (3)-(ii), (4)-(iv)

Description : Match the following joints with the bones involved: (1) Gliding joint (i) Between carpal and metacarpal of thumb (2) Hinge joint (ii) Between atlas and axis (3) Pivot joint (iii) Between the carpals (4) Saddle joint (iv) Between humerus and ... ), (4)-(i) (d) (1)-(i), (2)-(iii), (3)-(ii), (4)-(iv)

Last Answer : (a) (1)-(iii), (2)-(iv), (3)-(ii), (4)-(i)

In a perfect prismatic compass (A) Magnetic axis and geometric axis of the needle coincide (B) Ends of the needle and pivot are in same vertical and horizontal planes (C) Pivot is vertically over the centre of the graduated circle (D) All the above

Description : In a perfect prismatic compass (A) Magnetic axis and geometric axis of the needle coincide (B) Ends of the needle and pivot are in same vertical and horizontal planes (C) Pivot is vertically over the centre of the graduated circle (D) All the above

Last Answer : (D) All the above

The vertical angle between longitudinal axis of a freely suspended magnetic needle and a horizontal line at its pivot, is known (A) Declination (B) Azimuth (C) Dip (D) Bearing

Description : The vertical angle between longitudinal axis of a freely suspended magnetic needle and a horizontal line at its pivot, is known (A) Declination (B) Azimuth (C) Dip (D) Bearing

Last Answer : (C) Dip

The pivot joint between atlas and axis is a type of : (1) Cartilaginous joint (2) Synovial joint (3) Saddle joint (4) Fibrous joint

Description : The pivot joint between atlas and axis is a type of : (1) Cartilaginous joint (2) Synovial joint (3) Saddle joint (4) Fibrous joint

Last Answer : (2) Synovial joint

Which type of joints is better when the product is subjected to large vibrations: welded or threaded? a) Welded b) Threaded c) Both have same results d) Depends on the magnitude of the vibrational force

Description : Which type of joints is better when the product is subjected to large vibrations: welded or threaded? a) Welded b) Threaded c) Both have same results d) Depends on the magnitude of the vibrational force

Last Answer : a) Welded

A flywheel weighs 400 kg and has a radius of gyration of 30 cm about its axis of rotation. It is mounted on a shaft subjected to a moment of 40 kgm. If the flywheel starts from restits speed after 3 seconds wil be a.10.9 rad/sec b.19.0 rad/sec c.51.2 rad/sec d.3.33 rad/sec e.16.35 rad/sec

Description : A flywheel weighs 400 kg and has a radius of gyration of 30 cm about its axis of rotation. It is mounted on a shaft subjected to a moment of 40 kgm. If the flywheel starts from restits speed after 3 seconds wil be a.10.9 rad/sec b.19.0 rad/sec c.51.2 rad/sec d.3.33 rad/sec e.16.35 rad/sec

Last Answer : d. 3.33 rad/sec

Why is the moment of a couple independent of the axis of rotation even if the axis is fixed?

Description : Why is the moment of a couple independent of the axis of rotation even if the axis is fixed?

Last Answer : Why is the moment of a couple independent of the axis of rotation even if the axis is fixed?

The angular velocity depends upon the rate of change of the _______. (1) Angular Distance (2) Angular acceleration (3) Angular Displacement (4) torque

Description : The angular velocity depends upon the rate of change of the _______. (1) Angular Distance (2) Angular acceleration (3) Angular Displacement (4) torque

Last Answer : (3) Angular Displacement Explanation: The angular velocity is defined as the rate of change of angular displacement and is a vector quantity which specifies the angular speed of an object and the axis about which the object is rotating.

Consider tile following statements: [IES-1993; 2002; 2006] Radius of friction circle for a journal bearing depends upon 1. Coefficient of friction 2. Radius of the journal 3. Angular speed of rotation of the shaft Which of the statements given above are correct? (a) 1,2 and 3 (b) Only 1 and 2 (c) Only 2 and 3 (d) Only 1 and 3

Description : Consider tile following statements: [IES-1993; 2002; 2006] Radius of friction circle for a journal bearing depends upon 1. Coefficient of friction 2. Radius of the journal 3. Angular speed of rotation of the shaft Which of the ... ) 1,2 and 3 (b) Only 1 and 2 (c) Only 2 and 3 (d) Only 1 and 3

Last Answer : (b) Only 1 and 2

When a mass is rotating in a plane about a fixed point, its angular momentum is directed along: (1) the tangent to the orbit (2) a line perpendicular to the plane of rotation (3) the line making an angle of 45° to the plane of rotation (4) the radius

Description : When a mass is rotating in a plane about a fixed point, its angular momentum is directed along: (1) the tangent to the orbit (2) a line perpendicular to the plane of rotation (3) the line making an angle of 45° to the plane of rotation (4) the radius

Last Answer : (2) a line perpendicular to the plane of rotation

The maximum magnitude of shear stress due to shear force F on a rectangular section of area A at the neutral axis, is (A) F/A (B) F/2A (C) 3F/2A (D) 2F/3A

Description : The maximum magnitude of shear stress due to shear force F on a rectangular section of area A at  the neutral axis, is  (A) F/A (B) F/2A (C) 3F/2A (D) 2F/3A

Last Answer : (C) 3F/2A

If the perpendicular distance of a point P from the X-axis is 5 units and the foot of the perpendicular lies on the negative direction of X-axis, then the point P has -Maths 9th

Description : If the perpendicular distance of a point P from the X-axis is 5 units and the foot of the perpendicular lies on the negative direction of X-axis, then the point P has -Maths 9th

Last Answer : (d) We know that, the perpendicular distance of a point from the X-axis gives y-coordinate of that point. Here, foot of perpendicular lies on the negative direction of X-axis, so perpendicular distance can be measure in II quadrant or III quadrant. Hence, the point P has y-coordinate = 5 or -5.

The perpendicular distance of the point P(3, 4) from the Y-axis is -Maths 9th

Description : The perpendicular distance of the point P(3, 4) from the Y-axis is -Maths 9th

Last Answer : (a) We know that, abscissa or the x-coordinate of a point is its perpendicular distance from the Y-axis. So, perpendicular distance of the point P(3, 4)from Y-axis = Abscissa = 3.

If the perpendicular distance of a point P from the X-axis is 5 units and the foot of the perpendicular lies on the negative direction of X-axis, then the point P has -Maths 9th

Description : If the perpendicular distance of a point P from the X-axis is 5 units and the foot of the perpendicular lies on the negative direction of X-axis, then the point P has -Maths 9th

Last Answer : (d) We know that, the perpendicular distance of a point from the X-axis gives y-coordinate of that point. Here, foot of perpendicular lies on the negative direction of X-axis, so perpendicular distance can be measure in II quadrant or III quadrant. Hence, the point P has y-coordinate = 5 or -5.

The perpendicular distance of the point P(3, 4) from the Y-axis is -Maths 9th

Description : The perpendicular distance of the point P(3, 4) from the Y-axis is -Maths 9th

Last Answer : (a) We know that, abscissa or the x-coordinate of a point is its perpendicular distance from the Y-axis. So, perpendicular distance of the point P(3, 4)from Y-axis = Abscissa = 3.

Find the perpendicular distance of the point P(5, 7) from the y-axis. -Maths 9th

Description : Find the perpendicular distance of the point P(5, 7) from the y-axis. -Maths 9th

Last Answer : Solution :- 5