Explain the importance of various machining parameters in improving tool life.

Explain the importance of various machining parameters in improving tool life.
by

1 Answer

Answer :

Various Machining Parameters in Improving Tool Life are:

1. Hardness and machinability of the metal to be machined.

2. Quality of heat treatment if it is steel tool.

3. Whether machining is to be done with or without the use of coolant

4. Rigidity of the tool and the work.

5. Shape of the tool.

6. Depth of cut.

7. Feed to be given to the tool.

8. Cutting Speed.
by

Related questions

Explain importance of Tool Life

Description : Explain importance of Tool Life

Last Answer : Tool life is a volume of material removed by a machining tool during its total usage span. The volume may be in cubic mm or cubic cm at a standard cutting speed. Importance of Tool Life: 1 ... will be profit in manufacturing processes. 2. Time saved in frequent tool changing. 3. Low inventory.

Explain the importance of pattern allowances and state various pattern allowances.

Description : Explain the importance of pattern allowances and state various pattern allowances. 

Last Answer : Pattern Allowances are Important Because: 1. Solid contraction can be reduced by providing more allowance on patterns. 2. When a pattern is drawn from a mould, there is always some ... allowance iii. Machining allowance iv. Distortion or camber allowance v. Shake allowance / rapping allowance

Explain single point cutting tool nomenclature with sketch.

Description : Explain single point cutting tool nomenclature with sketch.

Last Answer : Single Point Cutting Tool Nomenclature: 1. Shank: The main body of the tool is known as shank. It is the backward part of tool which is hold by tool post. 2. Face: The top surface tool ... piece. 12. Nose Radius: The intersecting area of both cutting edges is known as nose of the tool.

The machine tool, in which calculation and setting of the operating conditions like depth ofcut, feed, speed are done during the machining by the control system itself, is called a.Computer Numerical Control System b.Direct Numerical Control System c.Machining Center System d.Adaptive Control System

Description : The machine tool, in which calculation and setting of the operating conditions like depth ofcut, feed, speed are done during the machining by the control system itself, is called a.Computer Numerical Control System b.Direct Numerical Control System c.Machining Center System d.Adaptive Control System

Last Answer : d.Adaptive Control System

In CNC machining tool radius compensation turning the left mode ON programming contourdone by a.G40 b.G41 c.G42 d.G43

Description : In CNC machining tool radius compensation turning the left mode ON programming contourdone by a.G40 b.G41 c.G42 d.G43

Last Answer : b.G41

n an NC machining operation, the tool has to be moved from point (5, 4) to point (7, 2) alonga circular path with centre at (5, 2). Before starting the operation, the tool is at (5, 4). The G and N codes for this motion are a.N010 GO3 X7.0 Y2.0 I5.0 J2.0 b.N010 GO2 X7.0 Y2.0 I5.0 J2.0 c.N010 GO1 X7.0 Y2.0 I5.0 J2.0 d.N010 GOO X7.0 Y2.0 I5.0 J2.0

Description : n an NC machining operation, the tool has to be moved from point (5, 4) to point (7, 2) alonga circular path with centre at (5, 2). Before starting the operation, the tool is at (5, 4). The G and N codes for this motion ... 0 I5.0 J2.0 c.N010 GO1 X7.0 Y2.0 I5.0 J2.0 d.N010 GOO X7.0 Y2.0 I5.0 J2.0

Last Answer : b.N010 GO2 X7.0 Y2.0 I5.0 J2.0

List any four parameters of improving fuel economy.

Description : List any four parameters of improving fuel economy.

Last Answer : 1. Use of multi-functional fuel additives will provide 3 to 4% fuel economy. 2. Good driving habits. 3. Properly maintained fuel supply system. 4. Use of computer controlled fuel ... computer controlled ignition system. 6. Use of higher voltage automotive electrical system (42 volts system).

Classify various types of Milling Machines. List major parts of Universal Milling Machine.

Description : Classify various types of Milling Machines. List major parts of Universal Milling Machine.

Last Answer : Classification of Milling Machine:- 1) Column and Knee Type Milling Machine a. Plain or Horizontal Milling Machine b. Hand Milling Machine c. Vertical Milling Machine d. Universal Milling Machine e. Omniversal ... Base [2]Column [3]Knee [4]Saddle [5]Table [6]Overhanging arm [7]Spindle [8]Arbor

Classify various types of molding sands and give it’s uses.

Description : Classify various types of molding sands and give it’s uses.

Last Answer : 1. Special Sand: Uses: Used for cores of brass and bronze casting, for non- ferrous castings of an intricate shape and for heavy steel casting.  2. Green sand: Uses: It is used only for simple and ... 9. Core sand: Uses: Sand used for making cores is called core sand, sometimes called, oil sand. 

Describe various phase transformations of iron after cooling at various rates using TTT diagram.

Description : Describe various phase transformations of iron after cooling at various rates using TTT diagram.

Last Answer : TTT is Time-Temperature-Transformation diagram. It shows the microstructures resulting from non-equilibrium cooling which is not possible on Fe-c diagram. It shows various microstructures of steels depending upon cooling rate & also the temperature and time taken for each transformation.

State various types of Cast Iron and give application of each.

Description : State various types of Cast Iron and give application of each. 

Last Answer : There are four basic types of Cast Iron - (1) White Cast Iron: Applications: Lifter Bars, Shell Liners in Grinding Mills, Pumps, Balls and Rings of Coal Pulverisers, etc. (2) Gray Cast Iron. ... Parts, Anchor of Ships, etc. (4) Malleable Cast Iron. Applications: Pots Pans and utensils, etc.

Classify various Manufacturing Processes.

Description : Classify various Manufacturing Processes. 

Last Answer : The Four main types of Manufacturing Processes are (1) Casting & Molding, (2) Machining, (3) Joining & Shearing and (4) Forming.

You have changed parameters for AS Java of your SAP system based on AS ABAP+ Java. A restart of AS Java is requiredHow can you stop and start the Java stack without restarting the ABAP stack? A. Use the Config tool B. Use transaction, SAP Servers (SM51) C. Use transaction, ICM Monitors (SMICM) D. Use transaction CCMS Control panel: Display Statuses and alerts (RZ03)

Description : You have changed parameters for AS Java of your SAP system based on AS ABAP+ Java. A restart of AS Java is requiredHow can you stop and start the Java stack without restarting the ABAP ... transaction, ICM Monitors (SMICM) D. Use transaction CCMS Control panel: Display Statuses and alerts (RZ03)

Last Answer : C. Use transaction, ICM Monitors (SMICM)

Justify use of tool inserts. State the materials used for inserts. Identify the parameters of insert designated as C – N – M – G – 12 – 04 – 08 as per ISO

Description : Justify use of tool inserts. State the materials used for inserts. Identify the parameters of insert designated as C – N – M – G – 12 – 04 – 08 as per ISO

Last Answer : Justification of tool inserts: The tools with indexible inserts of harder and special grade carbide or ceramic materials. A wear resistant layer of Titanium nitride of Titanium carbide is coated on the ... Symbol for tolerance 08: Turning insert nose radius G: symbol for fixing for chip breaker

Growth can be measured in various ways. Which of these can be used as parameters to measure growth?

Description : Growth can be measured in various ways. Which of these can be used as parameters to measure growth?

Last Answer : Growth can be measured in various ways. Which of these can be used as parameters to measure growth?

What are the various parameters we have to consider, while selecting IGBT?

Description : What are the various parameters we have to consider, while selecting IGBT?

Last Answer : In IGBT datasheet, we have to focus on following parameters Collector to emitter voltage VCESCollector Current ICCollector Dissipation PCJunction Temperature Tj

Biosystematics aims at (a) the classification of organisms based on broad morphological characters (b) delimiting various taxa of organisms and establishing their relationships (c) the classification of organisms based on their evolutionary history and establishing their phylogeny on the totality of various parameters from all fields of studies (d) identification and arrangement of organisms on the basis of their cytological characteristics.

Description : Biosystematics aims at (a) the classification of organisms based on broad morphological characters (b) delimiting various taxa of organisms and establishing their relationships (c) the ... (d) identification and arrangement of organisms on the basis of their cytological characteristics.

Last Answer : (b) delimiting various taxa of organisms and establishing their relationships

Explain keyway milling process with standard milling cutters.

Description : Explain keyway milling process with standard milling cutters.

Last Answer : Keyway Milling Operation: This milling process produce keyway slot. The cutter use if thin size. This operation suited for long keyways. The position of the cutter is shown in figure. Standard ... and then the cut is taken. Woodruff key is produced by using a woodruff key slot cutter.

Explain any four defects in casting and give remedies of it.

Description : Explain any four defects in casting and give remedies of it.

Last Answer : Casting Defects Remedies Shifts By ensuring proper alignment of the pattern or die part, moulding boxes, correct mounting of patterns on pattern plates, and checking of flasks, locating ... or replace core boxes, Repairs or replace core prints, Proper setting of cores. 

Explain induction hardening process and give it’s applications.

Description : Explain induction hardening process and give it’s applications.

Last Answer : Induction Hardening: It involves heating thin surface layer of hardenable steel and cast iron components by means of a high frequency induced current to a temperature within or above the transformation range ... [2] Crankshaft,[3] Spur gear,[4] Camshaft, [5] Cams, [6] Automobile parts 

Explain the effect of nickel, chromium, silicon, molybdenum addition on the properties of steel.

Description : Explain the effect of nickel, chromium, silicon, molybdenum addition on the properties of steel.

Last Answer : 1) Effect of Nickel as alloying Element: i) Provides toughness, corrosion resistance, and deep hardening. ii) Increases resistance to impact iii ) Improves tensile strength 2. Effect ... temper brittleness. iv) increases strength. V0 Mo-carbides help increase creepresistance at elevated temps

Explain taper turning by using swiveling compound rest.

Description : Explain taper turning by using swiveling compound rest.

Last Answer : Taper Turning Method by Swiveling the Compound Rest: This method employs the principle of turning taper by rotating the work piece on the lathe axis and feeding the tool at an angle to the ... be fed at the angle and generate a corresponding taper. The movement of tool is controlled by hand.

Explain Gang Milling Process.

Description : Explain Gang Milling Process.

Last Answer : Gang Milling Operation: It involves the use of a combination of more than two cutters, mounted on a common arbor, for milling a number of flat horizontal and vertical surfaces of a work piece ... . The cutting speed of a gang of cutters is calculated from the cutter of the largest diameter. 

Draw Cooling Curve for Pure Iron and explain.

Description : Draw Cooling Curve for Pure Iron and explain.

Last Answer : Cooling Curve for Pure Iron: Figure: Cooling Curve for Pure Iron

Explain induction hardening process.

Description : Explain induction hardening process.

Last Answer : Induction hardening - The process of the surface hardening by inductive heating is known as induction hardening. A high frequency current is passed through the inductor blocks which surround the gear to ... time, the circuit is opened and water is sprayed immediately on the surface for quenching.

Digit 5 in Opitz system is for_________ a.Part class b.Main shape c.Additional holes, teeth and forming d.Plane surface machining

Description : Digit 5 in Opitz system is for_________ a.Part class b.Main shape c.Additional holes, teeth and forming d.Plane surface machining

Last Answer : c.Additional holes, teeth and forming

Digit 4 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Description : Digit 4 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Last Answer : d.Plane surface machining

Digit 3 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Description : Digit 3 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Last Answer : c.Rotational machining

Digit 2 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Description : Digit 2 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Last Answer : b.Main shape

Digit 1 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Description : Digit 1 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Last Answer : a.Part class

In the process of Selective Laser Sintering, raw material used is in the form of ______ a.machining wax b.foam core c.powder d.rubber

Description : In the process of Selective Laser Sintering, raw material used is in the form of ______ a.machining wax b.foam core c.powder d.rubber

Last Answer : c.powder

Machining is never used for rapid prototyping because it takes too long. a.TRUE b.FALSE c. d.

Description : Machining is never used for rapid prototyping because it takes too long. a.TRUE b.FALSE c. d.

Last Answer : b.FALSE

Which of the following is not an example of additive manufacturing? a.Fused-deposition-modeling b.Electron beam machining c.SLS d.Injection molding

Description : Which of the following is not an example of additive manufacturing? a.Fused-deposition-modeling b.Electron beam machining c.SLS d.Injection molding

Last Answer : d.Injection molding

In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right compensation, the trajectory of the cutter will be a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5) b.(0,-5), (55,-5), (55, 35), (-5, 35), (-5,-5) c.(5, 5), (5, 25), (45, 25), (45, 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Description : In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right ... , 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Last Answer : a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5)

XY Plane Selection in CNC machining is done by….. a.G16 b.G17 c.G18 d.G19

Description : XY Plane Selection in CNC machining is done by….. a.G16 b.G17 c.G18 d.G19

Last Answer : b.G17

For CNC machining skilled part programmers are needed. a.TRUE b.FALSE c. d.

Description : For CNC machining skilled part programmers are needed. a.TRUE b.FALSE c. d.

Last Answer : a.TRUE

In CNC systems multiple microprocessors and programmable logic controllers work a.in parallel b.in series c.one after the other d.for 80% of the total machining time

Description : In CNC systems multiple microprocessors and programmable logic controllers work a.in parallel b.in series c.one after the other d.for 80% of the total machining time

Last Answer : a.in parallel

CNC machining centres do not include operations like a.milling b.boring c.welding d.tapping

Description : CNC machining centres do not include operations like a.milling b.boring c.welding d.tapping

Last Answer : c.welding

what are Machining and Processing?

Description : what are Machining and Processing?

Last Answer : In the mechanical manufacturing industry, most metal components and parts require some form of machining during the manufacturing process. Metal machining is the most widespread metal-shaping process which involves cutting metals to small pieces. Similar to the machining of other types of mateirals,

How to plan and prepare to carry out the machining operations?

Description : How to plan and prepare to carry out the machining operations?

Last Answer : What is the answer ?

Where online can I purchase used CNC machining equipment?

Description : Where online can I purchase used CNC machining equipment?

Last Answer : You can purchase used CNC machining equipment at www.usedmachinerysales.com. Another good website is www.industrialmachinery.com

Among casting, forging and forging which has the slowest rate of production? a) Casting b) Forging c) Machining d) All have equal rate of production

Description : Among casting, forging and forging which has the slowest rate of production? a) Casting b) Forging c) Machining d) All have equal rate of production

Last Answer : c) Machining

Pollution by particulate matter emission in the atmosphere does not take place during metal (A) Grinding (B) Machining(C) Cutting(D) Polishing

Description : Pollution by particulate matter emission in the atmosphere does not take place during metal (A) Grinding (B) Machining (C) Cutting (D) Polishing

Last Answer : (D) Polishing

__________ property of steel increases by addition of large amount of silicon in it. (A) Mechanical (B) Machining (C) Magnetic (D) Refractory

Description : __________ property of steel increases by addition of large amount of silicon in it. (A) Mechanical (B) Machining (C) Magnetic (D) Refractory

Last Answer : Option C

Presence of nickel & chromium in steel does not raise its (A) Elastic limit (B) Machining properties (C) Ductility (D) Resilience Answer: Option A

Description : Presence of nickel & chromium in steel does not raise its (A) Elastic limit (B) Machining properties (C) Ductility (D) Resilience Answer: Option A

Last Answer : Option A

Compressed dry air is used as the cutting fluid, while machining (A) Steel (B) Cast iron (C) Aluminium (D) None of these

Description : Compressed dry air is used as the cutting fluid, while machining (A) Steel (B) Cast iron (C) Aluminium (D) None of these

Last Answer : Option B

Annealing of cast iron (A) Softens it to facilitate machining (B) Decreases the free carbon (C) Increases the strength (D) None of these

Description : Annealing of cast iron (A) Softens it to facilitate machining (B) Decreases the free carbon (C) Increases the strength (D) None of these

Last Answer : Option A

Enlist different types of chips formed during machining

Description : Enlist different types of chips formed during machining

Last Answer : Different types of chips: 1. Discontinuous or segmental chips 2. Continuous chips 3. Continuous chips with built-up edge (BUE) 4. Non homogeneous chip

What are the factors considered while selecting the components for machining on CNC machines?

Description : What are the factors considered while selecting the components for machining on CNC machines?

Last Answer : Following are the factors to be considered in selecting components of CNC machines? 1. High precision and repeatability. 2. Reliability. 3. Efficiency -To meet the requirement of high precision. ... should be such that removal of swarf is easy and the chips do not fall on the slideways.

List types of chips produced in machining process.

Description : List types of chips produced in machining process.

Last Answer : The various types of chips produced in machining process are as follows: 1. Continuous chips: According to its name, continuous chips have a continuous segment. . 2. Discontinuous chips or segmental chips: ... chip is same as the continuous chips except a built edge is form at the face of tool.