Explain keyway milling process with standard milling cutters.

Explain keyway milling process with standard milling cutters.
by

1 Answer

Answer :

Keyway Milling Operation:

electronics2electrical.com 691 - .jpg

This milling process produce keyway slot. The cutter use if thin size. This operation suited for long keyways. The position of the cutter is shown in figure. Standard keyways are cut on shafts by using side milling cutters or end mills. The cutter is exactly at the center line of the work piece and then the cut is taken. Woodruff key is produced by using a woodruff key slot cutter.

by

Related questions

Write the suitable cutter for carrying following operations on milling machine (i) Gear Tooth (ii) Parting off (iii) Keyway (iv) V-grooves (v) Rounding of corner (vi) Cutting of narrow slot and groove

Description : Write the suitable cutter for carrying following operations on milling machine (i) Gear Tooth (ii) Parting off (iii) Keyway (iv) V-grooves (v) Rounding of corner (vi) Cutting of narrow slot and groove

Last Answer : (i) Gear Tooth : Form milling cutter, Cylindrical type or End mill type, Gear cutter. (ii) Parting off: Slitting Cutter (iii) Keyway : Staggered teeth side milling cutter, End mill cutter, key ... milling cutter. Selection of a cutter depends upon type and size of slot or groove to be produced. 

Explain Gang Milling Process.

Description : Explain Gang Milling Process.

Last Answer : Gang Milling Operation: It involves the use of a combination of more than two cutters, mounted on a common arbor, for milling a number of flat horizontal and vertical surfaces of a work piece ... . The cutting speed of a gang of cutters is calculated from the cutter of the largest diameter. 

Classify various types of Milling Machines. List major parts of Universal Milling Machine.

Description : Classify various types of Milling Machines. List major parts of Universal Milling Machine.

Last Answer : Classification of Milling Machine:- 1) Column and Knee Type Milling Machine a. Plain or Horizontal Milling Machine b. Hand Milling Machine c. Vertical Milling Machine d. Universal Milling Machine e. Omniversal ... Base [2]Column [3]Knee [4]Saddle [5]Table [6]Overhanging arm [7]Spindle [8]Arbor

A sunk key fits in the keyway of the _____ only. a) Hub b) Sleeve c) Both hub and sleeve d) Neither hub nor sleeve

Description : A sunk key fits in the keyway of the _____ only. a) Hub b) Sleeve c) Both hub and sleeve d) Neither hub nor sleeve

Last Answer : a) Hub

Sunk key fits in the keyway of the .......... only. A. Sleeve B. Hub C. Both sleeve and hub D. neither sleeve and hub

Description : Sunk key fits in the keyway of the .......... only. A. Sleeve B. Hub C. Both sleeve and hub D. neither sleeve and hub

Last Answer : B. Hub

A sunk key fits in the keyway of the _____ only. a) Hub b) Sleeve c) Both hub and sleeve d) Neither hub nor sleeve

Description : A sunk key fits in the keyway of the _____ only. a) Hub b) Sleeve c) Both hub and sleeve d) Neither hub nor sleeve

Last Answer : a) Hub

In case of sunk key, (A) The keyway is cut in the shaft only (B) The keyway is cut in the hub only (C) The keyway is cut in both the shaft and the hub (D) None of the above

Description : In case of sunk key, (A) The keyway is cut in the shaft only (B) The keyway is cut in the hub only (C) The keyway is cut in both the shaft and the hub (D) None of the above

Last Answer : (C) The keyway is cut in both the shaft and the hub

The keyway, (A) Reduces strength of shaft (B) Reduces rigidity of shaft (C) Increases stress concentration (D) All of above

Description : The keyway, (A) Reduces strength of shaft (B) Reduces rigidity of shaft (C) Increases stress concentration (D) All of above

Last Answer : (D) All of above

The key, which fits in the keyway of hub, only is called, (A) Saddle key (B) Feather key (C) Woodruff key (D) Kennedy key

Description : The key, which fits in the keyway of hub, only is called, (A) Saddle key (B) Feather key (C) Woodruff key (D) Kennedy key

Last Answer : (A) Saddle key

In cell formation using production flow analysis, the following process will be left out of theanalysis a.Grinding b.Milling c.Drilling d.Gear cutting

Description : In cell formation using production flow analysis, the following process will be left out of theanalysis a.Grinding b.Milling c.Drilling d.Gear cutting

Last Answer : d.Gear cutting

Which one of the process is subtractive prototyping? a.5 axis CNC Milling b.Fused Deposition Modeling c.Multi-Jet Modeling d.Stereolithography Apparatus

Description : Which one of the process is subtractive prototyping? a.5 axis CNC Milling b.Fused Deposition Modeling c.Multi-Jet Modeling d.Stereolithography Apparatus

Last Answer : a.5 axis CNC Milling

Which of the following is not subtractive process? a.Milling b.Stereo-lithography c.Sawing d.EDM

Description : Which of the following is not subtractive process? a.Milling b.Stereo-lithography c.Sawing d.EDM

Last Answer : b.Stereo-lithography

Powder metallurgy process does not make metal powder by (A) Atomisation (B) Grinding/milling (C) Hammering (D) Electrolytic deposition

Description : Powder metallurgy process does not make metal powder by (A) Atomisation (B) Grinding/milling (C) Hammering (D) Electrolytic deposition

Last Answer : Option C

W yellow powder, mostly made of uranium, that is produced in the uranium milling process is called what?

Description : W yellow powder, mostly made of uranium, that is produced in the uranium milling process is called what?

Last Answer : ANSWER: YELLOWCAKE or AMMONIUM DIURANATE

Explain induction hardening process and give it’s applications.

Description : Explain induction hardening process and give it’s applications.

Last Answer : Induction Hardening: It involves heating thin surface layer of hardenable steel and cast iron components by means of a high frequency induced current to a temperature within or above the transformation range ... [2] Crankshaft,[3] Spur gear,[4] Camshaft, [5] Cams, [6] Automobile parts 

Explain induction hardening process.

Description : Explain induction hardening process.

Last Answer : Induction hardening - The process of the surface hardening by inductive heating is known as induction hardening. A high frequency current is passed through the inductor blocks which surround the gear to ... time, the circuit is opened and water is sprayed immediately on the surface for quenching.

How much money do expert fruit cutters make?

Description : How much money do expert fruit cutters make?

Last Answer : Glassdoor says about $32,000 USD per year in whatever location it thinks I'm in. Comparably only has a Los Angeles statistic for them and claims: Fruit Cutters make the most in Los Angeles at $66,371, ... in North Palm Beach, FL lists a Fruit Cutter job at $12 - $14 an hour with insurance/benefits.

How to get past razor wire, without wire cutters?

Description : How to get past razor wire, without wire cutters?

Last Answer : Is someone trying to confine you to your apartment?

Sharing nail-cutters/clippers is weird... isn't it?

Description : Sharing nail-cutters/clippers is weird... isn't it?

Last Answer : Nope…. I used the same ones as my boyfriend. I haven’t caught a disease.. yet.

How much do plasma cutters cost?

Description : How much do plasma cutters cost?

Last Answer : answer:My dad bought one when they first came out. It was about 15K. That was 1985 dollars. But now you can get one for about 1K. They are super cool. It was jaw-dropping what they could do when they came out compared to a oxy-fuel cutting torch.

Is it possible to make quality dried pasta with cookie cutters?

Description : Is it possible to make quality dried pasta with cookie cutters?

Last Answer : answer:Hmm, your difficulty in finding a recipe seems to be because it is not easily done: III - Thou Shalt Not Make Thine Own Dry Pasta In Italy, you have pasta fresca (fresh pasta) and ... pasta machines do a horrible job. Home-extruded pasta is an abomination before the culinary gods. Source

Are laser cutters dangerous?

Description : Are laser cutters dangerous?

Last Answer : The truth is that, like many things in life, laser cutting machines will pose a serious threat if and only if the necessary precautions are not taken before, during, and after operation. There are definitely ... to cut metal exclusively.This use was the norm for a number of years.Later on in the 197

What types of material are laser cutters used on?

Description : What types of material are laser cutters used on?

Last Answer : A laser cutter can be used to cut intricate patterns from paper, plastic or thin sheet metal.

How do plasma cutters work?

Description : How do plasma cutters work?

Last Answer : Plasma cutters work by shooting a high-pressure gas through a hose and arcing electricity through the gas to create plasma. Basically, plasma cutters used high temperature gas and electricity to cut through metals.

Bolt Cutters?

Description : Bolt Cutters?

Last Answer : form_title= Bolt Cutters form_header= Do all of your home improvements yourself with bolt cutters. What size bolt cutters do you need?*= () Small () Medium () Large Are you willing to buy used?*= () Yes () No What will you be cutting?*= _ [50]

Which of the following is not a cutting machine? (A) Dicers (B) Knife cutters (C) Slitters (D) Tube mills

Description : Which of the following is not a cutting machine? (A) Dicers (B) Knife cutters (C) Slitters (D) Tube mills

Last Answer : (D) Tube mills

Differential lock offers advantage of E. Threshing efficiency of thresher (power operated) F. Capacity of chaff cutters G. Cleaning capacity of straw walkers H. None of the above

Description : Differential lock offers advantage of E. Threshing efficiency of thresher (power operated) F. Capacity of chaff cutters G. Cleaning capacity of straw walkers H. None of the above

Last Answer : F. Capacity of chaff cutters

Don Evers tells his media buyer that due to the complexity of the firm's laser cutters he wants to focus exclusively on which one of the following media types? A)Radio B)Television C)Outdoor D)Broadcast E)Print

Description : DDon Evers tells his media buyer that due to the complexity of the firm's laser cutters he wants to focus exclusively on which one of the following media types? A)Radio B)Television C)Outdoor D)Broadcast E)Print

Last Answer : E)Print

State any two advantages and disadvantages of foundry process

Description : State any two advantages and disadvantages of foundry process

Last Answer : Following are the advantages of foundry process:  i. It one of the most versatile manufacturing process. ii. Castings provide uniform directional properties. iii. Intricate shaped parts can be ... casting process, skilled operators are required. v. Internal defects are not identified easily. 

Describe Shell Molding Process with applications.

Description : Describe Shell Molding Process with applications.

Last Answer : Shell Moulding: It is a process in which the sand mixed with a thermosetting resin is allowed to come into contact with a heated metallic pattern plate, so that a thin and a strong shell of mould is ... 6. Gear blanks 7. Small crank shafts 8. Refrigerator valve plate 9. Chain seat bracket

Describe Carburizing Process with its applications.

Description : Describe Carburizing Process with its applications.

Last Answer : Principle of Carburizing: Carburizing is the case hardening process to obtain hard wear resistant and shock resistant case /surface and tough core inside, by introducing carbon on the steel surface by ... temperature.  Applications of Carburizing: 1) Gears 2) Camshafts 3) Bearings 4) Shafts

Describe flame hardening process with neat sketch.

Description : Describe flame hardening process with neat sketch.

Last Answer : Flame Hardening: The surface to be case hardened is heated by means of an oxyacetylene torch for sufficient time and Quenching is achieved by sprays of water which are integrally connected with the heating ... out where it is arranged to have the flame in progress along with quenching. 

Distinguish between annealing and normalizing process.

Description : Distinguish between annealing and normalizing process.

Last Answer : Annealing Normalizing Less hardness, toughness  Slightly more hardness, toughness.  For plain carbon steel the microstructure shows pearlite  Microstructure shows more pearlite.  ... less uniform. Internal stresses are least.  Internal stresses are slightly more 

Define heat treatment process with two purposes.

Description : Define heat treatment process with two purposes. 

Last Answer : Definition of Heat Treatment: It is defined as an operation or combinations of operations involving heating and cooling of metals or alloys in its solid state with the purpose of changing the ... Harden and strengthen the metal. 9. Homogenize the structure. 10. Change the chemical composition 

Drilling, milling and threading are examples of which kind of processes? a.Additive manufacturing b.Subtractive manufacturing c.Formative manufacturing d.None of the above

Description : Drilling, milling and threading are examples of which kind of processes? a.Additive manufacturing b.Subtractive manufacturing c.Formative manufacturing d.None of the above

Last Answer : b.Subtractive manufacturing

In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right compensation, the trajectory of the cutter will be a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5) b.(0,-5), (55,-5), (55, 35), (-5, 35), (-5,-5) c.(5, 5), (5, 25), (45, 25), (45, 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Description : In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right ... , 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Last Answer : a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5)

In which machine we get feedback? a.Lathe machine b.NC machine c.CNC machine d.Milling machine

Description : In which machine we get feedback? a.Lathe machine b.NC machine c.CNC machine d.Milling machine

Last Answer : c.CNC machine

CNC machining centres do not include operations like a.milling b.boring c.welding d.tapping

Description : CNC machining centres do not include operations like a.milling b.boring c.welding d.tapping

Last Answer : c.welding

Numerical control a.applies only to milling machines b.is a method for producing exact number of parts per hour c.is a method for controlling by means of set of instructions d.None of the mentioned

Description : Numerical control a.applies only to milling machines b.is a method for producing exact number of parts per hour c.is a method for controlling by means of set of instructions d.None of the mentioned

Last Answer : c.is a method for controlling by means of set of instructions

What are the benefits of down cut milling ?

Description : What are the benefits of down cut milling ?

Last Answer : The advantages of down cut milling are- 1. The downward pressure puts the workpiece on the table. 2. More depth of cut can be given. 3. Quick material removal is possible. 4. Increases production ... of the cutter do not rub against the workpiece surface. As a result, more heat is not generated.

What does milling mean ?

Description : What does milling mean ?

Last Answer : : The literal meaning of milling is the process of crushing or cutting with the help of crushing machine. This means that milling is the process of cutting the object with the help of ... processes performed by milling machines. Gear cutting , surface finishing , facing are some of these processes.

Milling machine vs Milling machine.

Description : What's the difference?

Last Answer : Milling machine is a milling machine tool.

__________ mill is not used for grinding wheat into flour and for milling of cereals & other vegetable products. (A) Buhrstone (B) Roller (C) Attrition (D) Pebble

Description : __________ mill is not used for grinding wheat into flour and for milling of cereals & other vegetable products. (A) Buhrstone (B) Roller (C) Attrition (D) Pebble

Last Answer : (D) Pebble

Flywheel is used in (A) Punch press (B) Drilling machine (C) Surface grinder (D) Milling machine

Description : Flywheel is used in (A) Punch press (B) Drilling machine (C) Surface grinder (D) Milling machine

Last Answer : (A) Punch press

machine is used for "Threshing , Harvesting , Separating , Cleaning and Collecting grains " a) Lathe b) Milling c) Combine d) Forklift

Description : machine is used for "Threshing , Harvesting , Separating , Cleaning and Collecting grains " a) Lathe b) Milling c) Combine d) Forklift

Last Answer : Combine 

Milling a hundred pounds of wheat should yield ____ percent straight flour. a. 72 to 75 c. 88 to 90 b. 75 to 80 d. 68 to 70

Description : Milling a hundred pounds of wheat should yield ____ percent straight flour. a. 72 to 75 c. 88 to 90 b. 75 to 80 d. 68 to 70

Last Answer : a. 72 to 75

State the equation of cutting speed for milling operation

Description : State the equation of cutting speed for milling operation

Last Answer : Ans: The equation for cutting speed for milling calculation is Where d = diameter of cutter(m) ,N= Cutter speed (RPM)

Explain the importance of various machining parameters in improving tool life.

Description : Explain the importance of various machining parameters in improving tool life.

Last Answer : Various Machining Parameters in Improving Tool Life are: 1. Hardness and machinability of the metal to be machined. 2. Quality of heat treatment if it is steel tool. 3. Whether machining is to be done with or ... tool. 6. Depth of cut. 7. Feed to be given to the tool. 8. Cutting Speed.

Explain single point cutting tool nomenclature with sketch.

Description : Explain single point cutting tool nomenclature with sketch.

Last Answer : Single Point Cutting Tool Nomenclature: 1. Shank: The main body of the tool is known as shank. It is the backward part of tool which is hold by tool post. 2. Face: The top surface tool ... piece. 12. Nose Radius: The intersecting area of both cutting edges is known as nose of the tool.

Explain any four defects in casting and give remedies of it.

Description : Explain any four defects in casting and give remedies of it.

Last Answer : Casting Defects Remedies Shifts By ensuring proper alignment of the pattern or die part, moulding boxes, correct mounting of patterns on pattern plates, and checking of flasks, locating ... or replace core boxes, Repairs or replace core prints, Proper setting of cores.