In order to slip one surface over another, maximum frictional force has to be overcome, this maximum frictional force between the two surfaces is also known as A. kinetic frictional force B. maximal frictional force C. limiting frictional force D. resisting force

In order to slip one surface over another, maximum frictional force

has to be overcome, this maximum frictional force between the two surfaces is

also known as

A. kinetic frictional force

B. maximal frictional force

C. limiting frictional force

D. resisting force
by

1 Answer

Answer :

limiting frictional force
by

Related questions

The maximum frictional force which comes into play when a body just begins to slide over the surface of another body is known as a.Kinetic friction b.Rolling friction c.Dynamic friction d.Limiting friction e.Sliding friction

Description : The maximum frictional force which comes into play when a body just begins to slide over the surface of another body is known as a.Kinetic friction b.Rolling friction c.Dynamic friction d.Limiting friction e.Sliding friction

Last Answer : d. Limiting friction

The maximum frictional force which comes into play when a body just begins to slide over another surface is called (A) Limiting friction (B) Sliding friction (C) Rolling friction (D) Kinematic friction

Description : The maximum frictional force which comes into play when a body just begins to slide over another surface is called (A) Limiting friction (B) Sliding friction (C) Rolling friction (D) Kinematic friction

Last Answer : (A) Limiting friction

Kinetic friction is a.Maximum value of frictional force when a body is about to move b.Friction between two well lubricated bodies c.Friction force acting when the body is in motion d.Driction force which keeps a body in motion e.None of the above

Description : Kinetic friction is a.Maximum value of frictional force when a body is about to move b.Friction between two well lubricated bodies c.Friction force acting when the body is in motion d.Driction force which keeps a body in motion e.None of the above

Last Answer : c. Friction force acting when the body is in motion

With increase of temperature, the frictional force acting between two surfaces (a) Increase (b) Remain the same (c) Decreases (d) becomes zero

Description : With increase of temperature, the frictional force acting between two surfaces (a) Increase (b) Remain the same (c) Decreases (d) becomes zero

Last Answer : Ans:(b)

The angle of friction is a.The angle which frictional force makes with the normal b.The anle at which the force applied from external souce will cause movement c.The angle at which fictional force is inclined to external force d.The angle between the normal reaction and the resultant of normal reaction and the limiting friction e.None of the above

Description : The angle of friction is a.The angle which frictional force makes with the normal b.The anle at which the force applied from external souce will cause movement c.The angle at which fictional ... the normal reaction and the resultant of normal reaction and the limiting friction e.None of the above

Last Answer : d. The angle between the normal reaction and the resultant of normal reaction and the limiting friction

Frictional force encountered after commencement of motion is called (A) Post friction (B) Limiting friction (C) Kinematic friction (D) Dynamic friction

Description : Frictional force encountered after commencement of motion is called  (A) Post friction  (B) Limiting friction  (C) Kinematic friction  (D) Dynamic friction 

Last Answer : (D) Dynamic friction 

Soil acceleration increases draft because of a) Increased normal load on soil working surface b) Increased frictional resistance c) Kinetic energy imparted to the soil d) All of the above

Description : Soil acceleration increases draft because of a) Increased normal load on soil working surface b) Increased frictional resistance c) Kinetic energy imparted to the soil d) All of the above

Last Answer : d) All of the above

Failure of the stability of slopes, generally occurs along (A) Slip plane (B) A horizontal surface (C) A curved surface (D) All the surfaces

Description : Failure of the stability of slopes, generally occurs along (A) Slip plane (B) A horizontal surface (C) A curved surface (D) All the surfaces

Last Answer : Answer: Option C

Kinetic friction is the (A) Tangent of angle between normal reaction and the resultant of normal reaction and the limiting friction (B) Ratio of limiting friction and normal reaction (C) The friction force acting when the body is just about to move (D) The friction force acting when the body is in motion

Description : Kinetic friction is the (A) Tangent of angle between normal reaction and the resultant of normal reaction and the limiting friction (B) Ratio of limiting friction and normal reaction (C) The friction force ... body is just about to move (D) The friction force acting when the body is in motion

Last Answer : (D) The friction force acting when the body is in motion

In order that flow takes place between two points in a pipeline, the differential pressure between these points must be more than (A) Frictional force (B) Viscosity (C) Surface friction (D) All of the above

Description : In order that flow takes place between two points in a pipeline, the differential pressure between these points must be more than (A) Frictional force (B) Viscosity (C) Surface friction (D) All of the above

Last Answer : Answer: Option D

The shear resistance of a soil is constituted basically of the following component. (A) The frictional resistance to translocation between the individual soil particles at their contact point (B) To the structural relation to displacement of the soil because of the interlocking of the particles (C) Cohesion and adhesion between the surfaces of the soil particles (D) All the above

Description : The shear resistance of a soil is constituted basically of the following component. (A) The frictional resistance to translocation between the individual soil particles at their contact point (B) To the ... (C) Cohesion and adhesion between the surfaces of the soil particles (D) All the above

Last Answer : Answer: Option D

A spring with a force constant of 20 newtons per meter is known to obey Hooke's Law. The spring is attached to a mass of 5 kilograms and placed on a horizontal, frictionless surface. The mass is displaced 3 meters from its equilibrium position and released. What is the kinetic energy of the mass as it passes through its equilibrium position?

Description : A spring with a force constant of 20 newtons per meter is known to obey Hooke's Law. The spring is attached to a mass of 5 kilograms and placed on a horizontal, frictionless surface. The ... and released. What is the kinetic energy of the mass as it passes through its equilibrium position? 

Last Answer : ANSWER: 90 JOULES

Which one of the following is not the law of dry friction? a.If friction is neglected, the reactions are always normal to the surfaces on contact b.Friction always acts to oppose the relative motion of the free body c.If static friction is acting, the value of the friction force may vary from zero to its maximum value d.The force of friction is always normal to the surface e.All of the above

Description : Which one of the following is not the law of dry friction? a.If friction is neglected, the reactions are always normal to the surfaces on contact b.Friction always acts to oppose the relative motion of ... its maximum value d.The force of friction is always normal to the surface e.All of the above

Last Answer : d. The force of friction is always normal to the surface

In damped vibrations, the amplitude of the resulting vibration gradually reduces. This is due to the reason that an amount of energy is always dissipated to overcome the ________ * 1 point (A) Frictional resistance (B) Work done(C) Fluid pressure (D) Air pressure

Description : In damped vibrations, the amplitude of the resulting vibration gradually reduces. This is due to the reason that an amount of energy is always dissipated to overcome the ________ * 1 point (A) Frictional resistance (B) Work done(C) Fluid pressure (D) Air pressure

Last Answer : (A) Frictional resistance

In damped vibrations, the amplitude of the resulting vibration gradually reduces. This is due to the reason that an amount of energy is always dissipated to overcome the ________ a) Frictional resistance b) Work done c) Fluid pressure d) Air pressure

Description : In damped vibrations, the amplitude of the resulting vibration gradually reduces. This is due to the reason that an amount of energy is always dissipated to overcome the ________ a) Frictional resistance b) Work done c) Fluid pressure d) Air pressure

Last Answer : a) Frictional resistance

Good design of the casing of a centrifugal pump aims at minimising the (A) Cavitation (B) Frictional losses (C) Kinetic energy loss (D) Static head

Description : Good design of the casing of a centrifugal pump aims at minimising the (A) Cavitation (B) Frictional losses (C) Kinetic energy loss (D) Static head

Last Answer : Option C

What is the reason why companding is employed in PCM systems? A. To overcome impulse noise in PCM receivers B. To allow amplitude limiting in the receivers C. To solve quantizing noise problem D. To protect small signals in PCM from quantizing distortion

Description : What is the reason why companding is employed in PCM systems? A. To overcome impulse noise in PCM receivers B. To allow amplitude limiting in the receivers C. To solve quantizing noise problem D. To protect small signals in PCM from quantizing distortion

Last Answer : D. To protect small signals in PCM from quantizing distortion

Reduction in vibration amplitude after one complete cycle of single degree free vibration with dry friction damping is_____, if where F"= frictional force between mass and surface and k =stiffness of the system. a)4F/k a b) 2f/K C) 3F/k D)8F/k

Description : Reduction in vibration amplitude after one complete cycle of single degree free vibration with dry friction damping is_____, if where F"= frictional force between mass and surface and k =stiffness of the system. a)4F/k a b) 2f/K C) 3F/k D)8F/k

Last Answer : a)4F/k

What type of frictional force works when parachuting ?

Description : What type of frictional force works when parachuting ?

Last Answer : Flowing friction force works when parachuting down.

Railway tracks are banked on curves so that : (1) the train may not fall down inwards. (2) the weight of the train may be reduced. (3) necessary centripetal force may be obtained from the horizontal component of the normal reaction due to track. (4) no frictional force may be produced between the wheels and the track.

Description : Railway tracks are banked on curves so that : (1) the train may not fall down inwards. (2) the weight of the train may be reduced. (3) necessary centripetal force may be obtained from the ... normal reaction due to track. (4) no frictional force may be produced between the wheels and the track.

Last Answer : (3) necessary centripetal force may be obtained from the horizontal component of the normal reaction due to track. Explanation: A vehicle moving at a fast speed on a straight rail/ road has ... it experiences an additional force, termed as centripetal force, acting towards the centre of the circle.

Railway tracks are banked on curves so that – (1) Necessary centrifugal force may be obtained from the horizontal component of the weight of the train (2) No frictional force may be produced between the tracks and the wheels of the train (3)Necessary centripetal force may be obtained from the horizontal component of the weight of the train (4) The train may not fall down inwards

Description : Railway tracks are banked on curves so that - (1) Necessary centrifugal force may be obtained from the horizontal component of the weight of the train (2) No frictional force may be produced between the ... the horizontal component of the weight of the train (4) The train may not fall down inwards

Last Answer : (3) Necessary centripetal force may be obtained from the horizontal component of the weight of the train

The force which makes a vehicle to stop when break is applied is called – (1) gravitational force (2) vanderwalls force (3) frictional force (4) covalent force

Description : The force which makes a vehicle to stop when break is applied is called – (1) gravitational force (2) vanderwalls force (3) frictional force (4) covalent force

Last Answer : (3) frictional force Explanation: A brake is a mechanical device that inhibits motion by absorbing energy from a moving system. It is used for slowing or stopping a moving vehicle, wheel, axle, or ... When the brakes are applied, work is done by the friction force between the brakes and the wheels.

When the milk is churned vigorously the cream from it is separated out clue to – (1) Centripetal force (2) Gravitational force (3) Frictional force (4) Centrifugal force

Description : When the milk is churned vigorously the cream from it is separated out clue to – (1) Centripetal force (2) Gravitational force (3) Frictional force (4) Centrifugal force

Last Answer : (4) Centrifugal force Explanation: The separation of cream from milk is based on the fact that when liquids of different specific gravity revolve around the same centre at the same distance with the ... the lighter one. Milk consists of two liquids of different specific gravity: fat and milk serum.

When milk is churned, the cream separates from it clue to: (1) Frictional force (2) Centrifugal force (3) Gravitation al force (4) Viscous forces

Description : When milk is churned, the cream separates from it clue to: (1) Frictional force (2) Centrifugal force (3) Gravitation al force (4) Viscous forces

Last Answer : (2) Centrifugal force Explanation: The extraction of cream happens because of the work of centrifugal force which works outward. The separation of cream from milk is based on the fact that when liquids ... . Milk can be regarded as two liquids of different specific gravities, the serum and the fat.

An Athlets runs before long jump to get advantage on – (1) Inertia of motion (2) Frictional force (3) Moment of a force (4) Principle of moments

Description : An Athlets runs before long jump to get advantage on – (1) Inertia of motion (2) Frictional force (3) Moment of a force (4) Principle of moments

Last Answer : (1) Inertia of motion Explanation: An athlete does so to build up forward momentum so that when he jumps he already has a forward motion that would be greater than that of a jump made from standing in ... in terms of inertia of motion which is the tendency of an object to resist a change in motion.

Direction of momentum is direction of object's A. mass B. acceleration C. velocity D. frictional force

Description : Direction of momentum is direction of object's A. mass B. acceleration C. velocity D. frictional force

Last Answer : velocity

A man exerts a northward force of 100 newtons on a 50 kilogram box which sits on a level floor. If the frictional force is 80 newtons, what is the magnitude of the northward acceleration of the box?

Description : A man exerts a northward force of 100 newtons on a 50 kilogram box which sits on a level floor. If the frictional force is 80 newtons, what is the magnitude of the northward acceleration of the box? 

Last Answer : ANSWER: 0.4 METERS PER SECOND SQUARED

Which of the following forces is nonconservative? w) gravitational force x) electrostatic force y) sliding frictional force z) restorative force of a spring

Description : Which of the following forces is nonconservative? w) gravitational force x) electrostatic force y) sliding frictional force z) restorative force of a spring

Last Answer : ANSWER: Y -- SLIDING FRICTIONAL FORCE 

The force which makes a vehicle to stop when break is applied is called (1) gravitational force (2) vanderwalls force (3) frictional force (4) covalant force

Description : The force which makes a vehicle to stop when break is applied is called (1) gravitational force (2) vanderwalls force (3) frictional force (4) covalant force

Last Answer : frictional force

When the milk is churned vigorously the cream from it is separated out due to (3) Centripetal force (2) Gravitational force (3) Frictional force (4) Centrifugal force

Description : When the milk is churned vigorously the cream from it is separated out due to (3) Centripetal force (2) Gravitational force (3) Frictional force (4) Centrifugal force

Last Answer : Centrifugal force

Railway tracks are banked on curves so that (1) Necessary centrifugal force may be obtained from the horizontal component of the weight of the train (2) No frictional force may be produced between the tracks and the wheels of the train (3) Necessary centripetal force may be obtained from the horizontal component of the weight of the train (4) The train may not fall down inwards

Description : Railway tracks are banked on curves so that (1) Necessary centrifugal force may be obtained from the horizontal component of the weight of the train (2) No frictional force may be produced between the ... the horizontal component of the weight of the train (4) The train may not fall down inwards

Last Answer : Necessary centripetal force may be obtained from the horizontal component of the weight of the train

When milk is churned, the cream separates from it due to: (1) Frictional force (2) Centrifugal force (3) Gravitational force (4) Viscous forces

Description : When milk is churned, the cream separates from it due to: (1) Frictional force (2) Centrifugal force (3) Gravitational force (4) Viscous forces 

Last Answer : Centrifugal force

An athlete runs before long jump to get advantage on (1) Inertia of motion (2) Frictional force (3) Moment of a force (4) Principle of moments

Description : An athlete runs before long jump to get advantage on (1) Inertia of motion (2) Frictional force (3) Moment of a force (4) Principle of moments

Last Answer : Inertia of motion

Tangent of angle of friction is equal to (A) Kinetic friction (B) Limiting friction (C) Angle of repose (D) Coefficient of friction

Description : Tangent of angle of friction is equal to (A) Kinetic friction (B) Limiting friction (C) Angle of repose (D) Coefficient of friction

Last Answer : (D) Coefficient of friction

Pick up wrong statement about friction force for dry surfaces. Friction force is (A) Proportional to normal load between the surfaces (B) Dependent on the materials of contact surface (C) Proportional to velocity of sliding (D) Independent of the area of contact surfaces

Description : Pick up wrong statement about friction force for dry surfaces. Friction force is  (A) Proportional to normal load between the surfaces  (B) Dependent on the materials of contact surface  (C) Proportional to velocity of sliding  (D) Independent of the area of contact surfaces 

Last Answer : (C) Proportional to velocity of sliding 

How do you tell if your shutters are capable of resisting hurricane force winds?

Description : How do you tell if your shutters are capable of resisting hurricane force winds?

Last Answer : Judge the material and condition The most important aspect to secure shutters is the construction of the hinges. Make sure that the hinges are secured firmly and that the latching mechanism is strong and in good working order.

The major resisting force in a gravity dam is (A) Water pressure (B) Wave pressure (C) Self-weight of dam (D) Uplift pressure

Description : The major resisting force in a gravity dam is (A) Water pressure (B) Wave pressure (C) Self-weight of dam (D) Uplift pressure

Last Answer : Answer: Option C

Water gets evaporated from water surfaces and land surfaces, get converted into water drops at lower temperatures, flows over ground surface and finally meets its source, i.e. lake, sea, etc. This entire process is generally known as (A) Hydrological cycle (B) Water cycle (C) Evaporation and precipitation cycle (D) All the above

Description : Water gets evaporated from water surfaces and land surfaces, get converted into water drops at lower temperatures, flows over ground surface and finally meets its source, i.e. lake, sea, etc. This ... Hydrological cycle (B) Water cycle (C) Evaporation and precipitation cycle (D) All the above

Last Answer : (D) All the above

Incorrect statement for co-efficient of friction could be that A. The coefficient of friction is denoted by the Greek letter µ. B. The coefficient of friction is directly proportional to the force of friction C. The coefficient of friction is constant even in the conditions of fast slipping and high contact pressure D. The coefficient of friction is inversely proportional to the force pressing the surfaces together

Description : Incorrect statement for co-efficient of friction could be that A. The coefficient of friction is denoted by the Greek letter µ. B. The coefficient of friction is directly proportional to ... D. The coefficient of friction is inversely proportional to the force pressing the surfaces together

Last Answer : The coefficient of friction is constant even in the conditions of fast slipping and high contact pressure

A drug which does not produce any action by itself but decreases the slope of the log dose-response curve and suppresses the maximal response to another drug is a: A. Physiological antagonist B. Competitive antagonist C. Noncompetitive antagonist D. Partial agonist

Description : A drug which does not produce any action by itself but decreases the slope of the log dose-response curve and suppresses the maximal response to another drug is a: A. Physiological antagonist B. Competitive antagonist C. Noncompetitive antagonist D. Partial agonist

Last Answer : C. Noncompetitive antagonist

A drug ‘R’ producing no response by itself causes the log dose-response curve of another drug ‘S’ to shift to the right in a parallel manner without decreasing the maximal response: Drug ‘R’ is a: A. Partial agonist B. Inverse agonist C. Competitive antagonist D. Noncompetitive antagonist

Description : A drug ‘R’ producing no response by itself causes the log dose-response curve of another drug ‘S’ to shift to the right in a parallel manner without decreasing the maximal response: Drug ‘R’ is a: A. Partial agonist B. Inverse agonist C. Competitive antagonist D. Noncompetitive antagonist

Last Answer : C. Competitive antagonist

A drug which does not produce any action by itself but decreases the slope of the log dose-response curve and suppresses the maximal response to another drug is a: A. Physiological antagonist B. Competitive antagonist C. Noncompetitive antagonist D. Partial agonist

Description : A drug which does not produce any action by itself but decreases the slope of the log dose-response curve and suppresses the maximal response to another drug is a: A. Physiological antagonist B. Competitive antagonist C. Noncompetitive antagonist D. Partial agonist

Last Answer : C. Noncompetitive antagonist

A drug ‘R’ producing no response by itself causes the log dose-response curve of another drug ‘S’ to shift to the right in a parallel manner without decreasing the maximal response: Drug ‘R’ is a: A. Partial agonist B. Inverse agonist C. Competitive antagonist D. Noncompetitive antagonist

Description : A drug ‘R’ producing no response by itself causes the log dose-response curve of another drug ‘S’ to shift to the right in a parallel manner without decreasing the maximal response: Drug ‘R’ is a: A. Partial agonist B. Inverse agonist C. Competitive antagonist D. Noncompetitive antagonist

Last Answer : C. Competitive antagonist

Which respiratory volume is the maximum volume of air that can be inhaled after maximal expiration? a) Inspiratory reserve volume Inspiratory reserve volume is normally 3000 mL. b) Tidal volume Tidal volume is the volume of air inhaled and exhaled with each breath. c) Expiratory reserve volume Expiratory reserve volume is the maximum volume of air that can be exhaled forcibly after a normal exhalation. d) Residual volume Residual volume is the volume of air remaining in the lungs after a maximum exhalation.

Description : Which respiratory volume is the maximum volume of air that can be inhaled after maximal expiration? a) Inspiratory reserve volume Inspiratory reserve volume is normally 3000 mL. b) Tidal volume Tidal ... volume Residual volume is the volume of air remaining in the lungs after a maximum exhalation.

Last Answer : a) Inspiratory reserve volume Inspiratory reserve volume is normally 3000 mL.

In a charged hollow metal conductor, the charge is w) on the inside surface only x) on both the inside and outside surfaces y) on the outside surface only z) only between the inside and outside surfaces

Description : In a charged hollow metal conductor, the charge is w) on the inside surface only x) on both the inside and outside surfaces y) on the outside surface only z) only between the inside and outside surfaces

Last Answer : ANSWER: Y -- ON THE OUTSIDE SURFACE ONLY

In an agricultural family all the family members are working the farmland of the family. Due to addition of two more person in the family they are also working in the farmland of the family with no additional increase in farm output. This type of unemployment is known as (a) Cyclical unemployment ; (b) Disguised unemployment ; (c) Frictional unemployment (d) Seasonal unemployment

Description : In an agricultural family all the family members are working the farmland of the family. Due to addition of two more person in the family they are also working in the farmland of the ... (a) Cyclical unemployment ; (b) Disguised unemployment ; (c) Frictional unemployment (d) Seasonal unemployment

Last Answer :  (b) Disguised unemployment ;

What is the maximum surface roughness for tongue and groove and small male and female gasket surfaces? a) 63 µ in b) 125 µ in c) 250 µ in d) 400 µ in

Description : What is the maximum surface roughness for tongue and groove and small male and female gasket surfaces? a) 63 µ in b) 125 µ in c) 250 µ in d) 400 µ in

Last Answer : b) 125 µ in

Which of the following cements contains maximum percentage of dicalcium silicate? (A) Ordinary Portland cement (B) Low heat cement (C) Rapid hardening cement (D) Sulphate resisting cement

Description : Which of the following cements contains maximum percentage of dicalcium silicate? (A) Ordinary Portland cement (B) Low heat cement (C) Rapid hardening cement (D) Sulphate resisting cement

Last Answer : Answer: Option B