Why are hydrocarbons currently the main source of world’s electrical energy and heat source?

Why are hydrocarbons currently the main source of world’s electrical energy and

heat source?
by

1 Answer

Answer :

The energy produced when burnt often this energy is used directly as heat as in home

heaters which use either oil or natural gas.
by

Related questions

The main source of the world’s electric energy and heat source is

Description : The main source of the world’s electric energy and heat source is

Last Answer : hydrocarbons.

Thermit welding uses the following energy source. (A) Electrical energy (B) Chemical energy (C) Energy of high velocity electrons (D) Heat generated by friction

Description : Thermit welding uses the following energy source. (A) Electrical energy (B) Chemical energy (C) Energy of high velocity electrons (D) Heat generated by friction

Last Answer : (B) Chemical energy

One source of Acid Rain is: w) sulfur in fossil fuels x) carbon in coal y) hydrogen in hydrocarbons z) chloroflorocarbons in aerosols

Description : One source of Acid Rain is: w) sulfur in fossil fuels x) carbon in coal y) hydrogen in hydrocarbons z) chloroflorocarbons in aerosols

Last Answer : ANSWER: W -- SULFUR IN FOSSIL FUELS

Overall heat transfer co-efficient for cooling of hydrocarbons by water is about (A) 50 -100 Kcal/hr.m2 .°C (B) 50 -100 W/m2 .°K (C) 50 -100 BTU/hr. ft. 2°F (D) 1000 - 1500 BTU/hr. ft. 2°F

Description : Overall heat transfer co-efficient for cooling of hydrocarbons by water is about (A) 50 -100 Kcal/hr.m2 .°C (B) 50 -100 W/m2 .°K (C) 50 -100 BTU/hr. ft. 2°F (D) 1000 - 1500 BTU/hr. ft. 2°F

Last Answer : (C) 50 -100 BTU/hr. ft. 2°F

What is a good approximation for the heat transfer coefficient of hydrocarbons inside 3/4″ tubes?

Description : What is a good approximation for the heat transfer coefficient of hydrocarbons inside 3/4″ tubes?

Last Answer : Use the following equation to estimate the heat transfer coefficient when liquid is flowing inside 3/4 inch tubing: Hio = 150./sqrt(avg. viscosity) Where: Hio (BTU/ft2-hr-0F Viscosity (cP) this is limited to a maximum viscosity of 3 cP

Main pollutant present in automobile exhaust is (A) CO (B) CO2 (C) NO (D) Hydrocarbons

Description : Main pollutant present in automobile exhaust is (A) CO (B) CO2 (C) NO (D) Hydrocarbons

Last Answer : (A) CO

The main precursors of winter smog are (A) N2O and hydrocarbons (B) NOx and hydrocarbons (C) SO2 and hydrocarbons (D) SO2 and ozone

Description : The main precursors of winter smog are (A) N2O and hydrocarbons (B) NOx and hydrocarbons (C) SO2 and hydrocarbons (D) SO2 and ozone

Last Answer : (C) SO2 and hydrocarbons

What is the currently officially valid tolerance of the mains voltage 230V in our electrical network?

Description : I remember that in times of 220V, tol was allowed. +/- 10%. After switching to 230V, this no longer applies - what are the current limits? And for the 'witnesses' - from which date did the change from 220 to 230V take place? Thank you.

Last Answer : The normalized rated voltage Un for the public low voltage network is Un = 230 V between phase and node. The voltage deviation should not exceed 10%. Under normal operating conditions, during each week, 95% of ... of the customer's supply equipment. The change I think was just 1,1,2008

To repair a small electrical motor that has been submerged in saltwater, you should _____________. A. wash it with fresh water and apply an external source of heat B. renew the windings C. send it ashore to an approved service facility D. rinse all electrical parts with a carbon tetrachloride cleaning solvent and then blow dry the motor with compressed air

Description : To repair a small electrical motor that has been submerged in saltwater, you should _____________. A. wash it with fresh water and apply an external source of heat B. renew the windings ... electrical parts with a carbon tetrachloride cleaning solvent and then blow dry the motor with compressed air

Last Answer : Answer: A

Pick out the wrong statement. (A) Higher specific gravity of petroleum products means higher C/H ratio (B) Aromatics have lower specific gravity than corresponding paraffins (C) Hydrocarbons of low specific gravity (e.g., paraffins) possess the maximum thermal energy per unit volume (D) Hydrocarbons of high specific gravity (e.g., aromatics) possess the maximum thermal energy per unit weight

Description : Pick out the wrong statement. (A) Higher specific gravity of petroleum products means higher C/H ratio (B) Aromatics have lower specific gravity than corresponding paraffins (C) Hydrocarbons of low ... of high specific gravity (e.g., aromatics) possess the maximum thermal energy per unit weight

Last Answer : (B) Aromatics have lower specific gravity than corresponding paraffins

Taxol is a drug currently being used to treat cancer, particularly resistant forms of breast cancer. A natural source of Taxol is: w) bark and leaves of the yew tree x) apricot pits y) periwinkle flowers z) ginkgo leaves

Description : Taxol is a drug currently being used to treat cancer, particularly resistant forms of breast cancer. A natural source of Taxol is: w) bark and leaves of the yew tree x) apricot pits y) periwinkle flowers z) ginkgo leaves 

Last Answer : ANSWER: W -- BARK AND LEAVES OF THE YEW TREE

Before Sir Richard Burton attempted to discover the source of the Nile, which was the world's longest river?

Description : Before Sir Richard Burton attempted to discover the source of the Nile, which was the world's longest river?

Last Answer : the nile

Which endangered animal is the source of the world’s finest, lightest, warmest and most expensive wool – the shahtoosh? (a) Nilgai (b) Cheetal (c) Kashmiri goat (d) Chiru

Description : Which endangered animal is the source of the world’s finest, lightest, warmest and most expensive wool – the shahtoosh? (a) Nilgai (b) Cheetal (c) Kashmiri goat (d) Chiru

Last Answer : (d) Chiru

Which memory is used to copy instructions or data currently used by CPU: a. Main memory b. Secondary memory c. Cache memory d. None of these

Description : Which memory is used to copy instructions or data currently used by CPU: a. Main memory b. Secondary memory c. Cache memory d. None of these

Last Answer : c. Cache memory

Three medications referred to as the ‘ABC drugs’ are currently the main pharmacological therapy for multiple sclerosis. Which of the following statements reflects information to be included in patient teaching? a) Flu-like symptoms can be controlled with nonsteroidal antiinflammatory drugs (NSAIDs) and usually resolve after a few months of therapy. Seventy-five percent of patients taking one of the interferons experience flu-like symptoms that can be controlled with NSAIDS and usually resolve after a few months of therapy.

Description : Three medications referred to as the ABC drugs' are currently the main pharmacological therapy for multiple sclerosis. Which of the following statements reflects information to be included in patient ... on an empty stomach. Glatiramer acetate is administed by intramuscular injection once a week.

Last Answer : a) Flu-like symptoms can be controlled with nonsteroidal antiinflammatory drugs (NSAIDs) and usually resolve after a few months of therapy. Seventy-five percent of patients taking one of the ... symptoms that can be controlled with NSAIDS and usually resolve after a few months of therapy.

When does a Page fault occur? (1) There is an error in a specific page (2) A program accesses a page not currently in main memory (3) A program accesses a page of main memory (4) A program accesses a page belonging to another program

Description : When does a Page fault occur? (1) There is an error in a specific page (2) A program accesses a page not currently in main memory (3) A program accesses a page of main memory (4) A program accesses a page belonging to another program

Last Answer : A program accesses a page not currently in main memory

All forms of energy that we use are ultimately transformed into-----? A. Electrical Energy B. Heat Energy (Answer) C. Light Energy D. Chemical Energy

Description : All forms of energy that we use are ultimately transformed into-----? A. Electrical Energy B. Heat Energy (Answer) C. Light Energy D. Chemical Energy

Last Answer : B. Heat Energy (Answer)

Microphone converts sound energy into ------? A. Microwaves B. Electrical signals (Answer) C. Optical Signals D. Heat energy

Description : Microphone converts sound energy into ------? A. Microwaves B. Electrical signals (Answer) C. Optical Signals D. Heat energy

Last Answer : B. Electrical signals (Answer)

Gliders depend on the following energy for their flight: (1) wind energy (2) electrical energy (3) heat energy (4) chemical energy

Description : Gliders depend on the following energy for their flight: (1) wind energy (2) electrical energy (3) heat energy (4) chemical energy

Last Answer : wind energy

What is the main source of heat ?

Description : What is the main source of heat ?

Last Answer : The main source of heat is the sun.

What has a form of energy that can produce heat light magnetism and electrical charges?

Description : What has a form of energy that can produce heat light magnetism and electrical charges?

Last Answer : if you mean to have commas between heat, light, magnetism, andelectrical charges then there is none. if heat light magnetism isall one thing then you're on your own.

If conductor pass energy then my question is that heat energy change int electrical of wire?

Description : If conductor pass energy then my question is that heat energy change int electrical of wire?

Last Answer : Conductor losses or "I squared R losses" occur when electric current flows through a conductor. Conductor loss in watts equals the square of the current in amperes (I2) multiplied by the resistance of the conductor in ohms (R), and each watt of electrical energy is equal to 1 joule of heat.

Heat Energy All forms of energy that we use are ultimately transformed into _____. A. Light energy B. Heat energy C. Chemical energy D. Electrical energy

Description : Heat Energy All forms of energy that we use are ultimately transformed into _____. A. Light energy B. Heat energy C. Chemical energy D. Electrical energy

Last Answer : ANSWER: B

All forms of energy that we use are ultimately transformed into _____. A. Light energy B. Heat energy C. Chemical energy D. Electrical energy

Description : All forms of energy that we use are ultimately transformed into _____. A. Light energy B. Heat energy C. Chemical energy D. Electrical energy

Last Answer : ANSWER: B

All forms of energy that we use are ultimately transformed into _____. A. Light energy B. Heat energy C. Chemical energy D. Electrical energy

Description : All forms of energy that we use are ultimately transformed into _____. A. Light energy B. Heat energy C. Chemical energy D. Electrical energy

Last Answer : ANSWER: B

Dynamo is a device for converting – (1) Heat energy into electrical energy (2) Mechanical energy into electrical energy (3) Magnetic energy into electrical energy (4) Chemical energy into electrical energy

Description : Dynamo is a device for converting – (1) Heat energy into electrical energy (2) Mechanical energy into electrical energy (3) Magnetic energy into electrical energy (4) Chemical energy into electrical energy

Last Answer : (2) Mechanical energy into electrical energy Explanation: A dynamo is a device for converting mechanical energy into electrical energy, esp. one that produces direct current. A dynamo is an ... were based, including the electric motor, the alternating-current alternator, and the rotary converter.

Dynamo is a device for converting – (1) Heat energy into electrical energy (2) Mechanical energy into electrical energy (3) Magnetic energy into electrical energy (4) Chemical energy into electrical energy

Description : Dynamo is a device for converting – (1) Heat energy into electrical energy (2) Mechanical energy into electrical energy (3) Magnetic energy into electrical energy (4) Chemical energy into electrical energy

Last Answer : (2) Mechanical energy into electrical energy Explanation: A dynamo is a device for converting mechanical energy into electrical energy, esp. one that produces direct current. A dynamo is an ... were based, including the electric motor, the alternating-current alternator, and the rotary converter.

A photoelectric cell converts – (1) Mechanical energy to electric energy (2) Heat energy to mechanical energy (3) Light energy to chemical energy (4) Light energy to electrical energy

Description : A photoelectric cell converts – (1) Mechanical energy to electric energy (2) Heat energy to mechanical energy (3) Light energy to chemical energy (4) Light energy to electrical energy

Last Answer : (4) Light energy to electrical energy Explanation: Photoelectric cell or photocell, device whose electrical characteristics (e.g., current, voltage, or resistance) vary when light is incident ... The most common type consists of two electrodes separated by a light-sensitive semiconductor material.

A steam engine converts the heat energy of steam into _____. (1) Electrical energy (2) Chemical energy (3) Mechanical energy (4) Thermal energy

Description : A steam engine converts the heat energy of steam into _____. (1) Electrical energy (2) Chemical energy (3) Mechanical energy (4) Thermal energy

Last Answer : (3) Mechanical energy Explanation: Steam engine, machine for converting heat energy into mechanical energy using steam as a medium, or working fluid.

In a photocell light energy is converted into – (1) Potential energy (2) Chemical energy (3) Heat energy (4) Electrical energy

Description : In a photocell light energy is converted into – (1) Potential energy (2) Chemical energy (3) Heat energy (4) Electrical energy

Last Answer : (4) Electrical energy Explanation: Photocells are scientifically known as photo-resistors. A photo-resistor or light dependent resistor (LDR) is a resistor whose resistance decreases with increasing ... by the semiconductor give bound electrons enough energy to jump into the conduction band.

One of the key areas for ....... energy saving in existing systems is waste heat recovery. a) Potential b) Kinetic c) Thermal d) Electrical

Description : One of the key areas for ....... energy saving in existing systems is waste heat recovery. a) Potential b) Kinetic c) Thermal d) Electrical

Last Answer : Potential

The following is the correct order of energy conversion in thermal power plants a. Chemical energy – Mechanical energy – Electrical energy b. Mechanical energy – Chemical energy – Electrical energy c. Wind energy – Mechanical energy – Electrical energy d. Heat energy – Electrical energy – Mechanical energy.

Description : The following is the correct order of energy conversion in thermal power plants a. Chemical energy - Mechanical energy - Electrical energy b. Mechanical energy - Chemical energy - Electrical energy c ... - Mechanical energy - Electrical energy d. Heat energy - Electrical energy - Mechanical energy.

Last Answer : a. Chemical energy – Mechanical energy – Electrical energy

When brakes are applied on a moving vehicle the kinetic energy is converted to A. Mechanical energy B. Heat energy C. Electrical energy D. Potential energy

Description : When brakes are applied on a moving vehicle the kinetic energy is converted to A. Mechanical energy B. Heat energy C. Electrical energy D. Potential energy

Last Answer : B. Heat energy

The dynamo is a device for converting (1) Heat energy into electrical energy (2) Mechanical energy into electrical energy (3) Magnetic energy into electrical energy (4) None of these

Description : The dynamo is a device for converting (1) Heat energy into electrical energy (2) Mechanical energy into electrical energy (3) Magnetic energy into electrical energy (4) None of these

Last Answer : (2) Mechanical energy into electrical energy

Heat energy is converted into electrical energy a. solar cells b. thermocouples c. electric generators d. none

Description : Heat energy is converted into electrical energy a. solar cells b. thermocouples c. electric generators d. none

Last Answer : b. thermocouples

Electrical energy is converted to heat at the rate of a. IRt b. I 2R c. I 2Rt d. VIt

Description : Electrical energy is converted to heat at the rate of a. IRt b. I 2R c. I 2Rt d. VIt

Last Answer : b. I 2R

Thermocouples convert a. heat energy into electrical energy b. heat energy into light energy c. heat energy into mechanical energy d. mechanical energy into heat energy

Description : Thermocouples convert a. heat energy into electrical energy b. heat energy into light energy c. heat energy into mechanical energy d. mechanical energy into heat energy

Last Answer : d. mechanical energy into heat energy

A photo-electric cell converts (1) mechanical energy to electric energy (2) heat energy to mechanical energy (3) light energy to chemical energy (4) light energy to electrical energy

Description : A photo-electric cell converts (1) mechanical energy to electric energy (2) heat energy to mechanical energy (3) light energy to chemical energy (4) light energy to electrical energy

Last Answer : light energy to electrical energy

In a photocell light energy is converted into (1) potential energy (2) chemical energy (3) heat energy (4) electrical energy

Description : In a photocell light energy is converted into (1) potential energy (2) chemical energy (3) heat energy (4) electrical energy

Last Answer : electrical energy

Dynamo is a device for converting (1) Heat energy into electrical energy (2) Mechanical energy into electrical energy (3) Magnetic energy into electrical energy (4) Chemical energy into electrical energy

Description : Dynamo is a device for converting (1) Heat energy into electrical energy (2) Mechanical energy into electrical energy (3) Magnetic energy into electrical energy (4) Chemical energy into electrical energy

Last Answer : Mechanical energy into electrical energy

why reactive ohm cannot converted electrical energy into heat?

Description : why reactive ohm cannot converted electrical energy into heat?

Last Answer : Because it describes the resistance of element that store energy rather than dissipate energy as heat

What converts electrical energy into heat energy?

Description : What converts electrical energy into heat energy?

Last Answer : High  resistance  conductor  which  will  dessipate  heat  energy  in  form  of  (I^2R)

True or False: 300 years from now when humanity studies the late 1990's into the 2000's outsourcing will be main reason why the U.S.A. lost it's grip on being the worlds #1 economic superpower?

Description : True or False: 300 years from now when humanity studies the late 1990's into the 2000's outsourcing will be main reason why the U.S.A. lost it's grip on being the worlds #1 economic superpower?

Last Answer : How about spiraling national debt incurred in no small part due to our most recent imperialist adventures?

The plants popularly known as 'petro crops' are rich in 1. Carbohydrates 2. Hydrocarbons 3. Proteins 4. Lipids The correct answer is: (a) 1, 2 and 3 (b) 1, 3 and 4 (c) 2, 3 and 4 (d) 2 and 4

Description : The plants popularly known as 'petro crops' are rich in 1. Carbohydrates 2. Hydrocarbons 3. Proteins 4. Lipids The correct answer is: (a) 1, 2 and 3 (b) 1, 3 and 4 (c) 2, 3 and 4 (d) 2 and 4

Last Answer : Ans:(d)

Liquid hydrocarbons are converted to low molecular weight gaseous hydrocarbons by a process known as (a) hydrogenation (b) reforming (c) cracking (d) reduction

Description : Liquid hydrocarbons are converted to low molecular weight gaseous hydrocarbons by a process known as (a) hydrogenation (b) reforming (c) cracking (d) reduction

Last Answer : Ans:(c)

Cooking gas supplied in cylinders by gas agencies is 1. In the form of a liquid 2. In the form of a gas 3. A mixture of hydrocarbons 4. A heterogeneous solution The correct statements are: (a) 1 and 3 (b) 2 only (c) 3 and 4 (d) 1 and 4

Description : Cooking gas supplied in cylinders by gas agencies is 1. In the form of a liquid 2. In the form of a gas 3. A mixture of hydrocarbons 4. A heterogeneous solution The correct statements are: (a) 1 and 3 (b) 2 only (c) 3 and 4 (d) 1 and 4

Last Answer : Ans:(a)

Unsaturated hydrocarbons with triple bond?

Description : Unsaturated hydrocarbons with triple bond?

Last Answer : Alkynes

The derivatives of a series of hydrocarbons whose simplest member is benzene is

Description : The derivatives of a series of hydrocarbons whose simplest member is benzene is

Last Answer : Aromatic hydrocarbons.

The unsaturated hydrocarbons having one triple bond between carbon atoms are

Description : The unsaturated hydrocarbons having one triple bond between carbon atoms are

Last Answer : alkynes.

The unsaturated hydrocarbons having double bond between carbon atom are

Description : The unsaturated hydrocarbons having double bond between carbon atom are

Last Answer : alkene.