The catalyst used in the manufacture of DDT is (A) Alumina (B) Silica (C) 20% oleum (D) Aluminium chloride

The catalyst used in the manufacture of DDT is
(A) Alumina
(B) Silica
(C) 20% oleum
(D) Aluminium chloride
by

1 Answer

Answer :

(C) 20% oleum
by

Related questions

Exothermic condensation reaction of monochlorobenzene with chloral in presence of 20% oleum as catalyst produces DDT. The reaction temperature is maintained at __________ °C. (A) 15-30 (B) 90-100 (C) 250-300 (D) < 0

Description : Exothermic condensation reaction of monochlorobenzene with chloral in presence of 20% oleum as catalyst produces DDT. The reaction temperature is maintained at __________ °C. (A) 15-30 (B) 90-100 (C) 250-300 (D) < 0

Last Answer : (A) 15-30

The catalyst used in the manufacture of DDT (from chloral and chlorobenzene) is (A) Dilute H2SO4 (B) Oleum (C) Ultraviolet light (D) None of these

Description : The catalyst used in the manufacture of DDT (from chloral and chlorobenzene) is (A) Dilute H2SO4 (B) Oleum (C) Ultraviolet light (D) None of these

Last Answer : (B) Oleum

Pick out the wrong statement. (A) Chamber process of sulphuric acid manufacture produces pure acid of concentration < 80% (B) Contact process of sulphuric acid manufacture produces pure acid of concentration ≥ 98% (C) 75% oleum can be produced by distillation of 20% oleum (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

Description : Pick out the wrong statement. (A) Chamber process of sulphuric acid manufacture produces pure acid of concentration < 80% (B) Contact process of sulphuric acid manufacture produces pure acid of ... of 20% oleum (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

Last Answer : (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

Catalyst used in catalytic reforming is (A) Platinum on alumina (B) Nickel (C) Iron (D) Aluminium chloride

Description : Catalyst used in catalytic reforming is (A) Platinum on alumina (B) Nickel (C) Iron (D) Aluminium chloride

Last Answer : (A) Platinum on alumina

Catalyst used in the isomerisation is (A) Aluminium chloride (B) Alumina (C) Nickel (D) Phosphoric acid

Description : Catalyst used in the isomerisation is (A) Aluminium chloride (B) Alumina (C) Nickel (D) Phosphoric acid

Last Answer : (A) Aluminium chloride

Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming process (C) The most ideal feedstock for thermal reforming is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Description : Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming ... is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Last Answer : (C) The most ideal feedstock for thermal reforming is dearomatised kerosene

. Which of the following is used as a catalyst in fluidised bed catalytic cracking? (A) Silica-magnesia (B) Silica-alumina (C) Bentonite clays (D) All (A), (B) and (C

Description : . Which of the following is used as a catalyst in fluidised bed catalytic cracking? (A) Silica-magnesia (B) Silica-alumina (C) Bentonite clays (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

Catalyst used in the catalytic cracking is (A) Silica-alumina (B) Silica gel (C) Vanadium pentoxide (D) Nickel

Description : Catalyst used in the catalytic cracking is (A) Silica-alumina (B) Silica gel (C) Vanadium pentoxide (D) Nickel

Last Answer : (A) Silica-alumina

Catalyst used in alkylation process is (A) Sulphuric acid (B) Nickel (C) Silica gel (D) Alumina

Description : Catalyst used in alkylation process is (A) Sulphuric acid (B) Nickel (C) Silica gel (D) Alumina

Last Answer : (A) Sulphuric acid

The catalyst used in shift converter is (A) Nickel (B) Vanadium (C) Silica gel (D) Alumina

Description : The catalyst used in shift converter is (A) Nickel (B) Vanadium (C) Silica gel (D) Alumina

Last Answer : (A) Nickel

The catalyst used in the production of elemental sulphur from H2S (by oxidation-reduction) is (A) Alumina (B) Silica gel(C) Platinum(D) Nickel

Description : The catalyst used in the production of elemental sulphur from H2S (by oxidation-reduction) is (A) Alumina (B) Silica gel (C) Platinum (D) Nickel

Last Answer : (A) Alumina

The catalyst used in shift converter is (A) Nickel (B) Vanadium (C) Silica gel (D) Alumina

Description : The catalyst used in shift converter is (A) Nickel (B) Vanadium (C) Silica gel (D) Alumina

Last Answer : (A) Nickel

Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2

Description : Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2

Last Answer : Option A

A good brick earth should contain: (A) About 20% to 30% of alumina (B) About 50% to 60% of silica (C) Not more than 5% of lime (D) All the above

Description : A good brick earth should contain: (A) About 20% to 30% of alumina (B) About 50% to 60% of silica (C) Not more than 5% of lime (D) All the above

Last Answer : Answer: Option D

Catalyst used in the manufacture of NH3 by Haber's process is finely divided (A) Nickel (B) Iron (C) Vanadium pentoxide (D) Alumina

Description : Catalyst used in the manufacture of NH3 by Haber's process is finely divided (A) Nickel (B) Iron (C) Vanadium pentoxide (D) Alumina

Last Answer : (B) Iron

Pick out the wrong statement. (A) DDT is manufactured by the condensation of chlorobenzene with chloral at 30°C in presence of oleum, which is a highly exothermic reaction (B) Chloral is obtained by the chlorination of ethyl alcohol (C) Insecticides acting on the insects through the respiratory system are called fumigants (D) Benzene hexachloride is not a contact insecticide

Description : Pick out the wrong statement. (A) DDT is manufactured by the condensation of chlorobenzene with chloral at 30°C in presence of oleum, which is a highly exothermic reaction (B) Chloral ... through the respiratory system are called fumigants (D) Benzene hexachloride is not a contact insecticide

Last Answer : (D) Benzene hexachloride is not a contact insecticide

For the manufacture of Portland cement, the proportions of raw materials used, are (A) Lime 63% ; silica 22% ; other ingredients 15% (B) Lime 22% ; silica 63% ; other ingredients 15% (C) Silica 40% ; lime 40% ; other ingredients 20% (D) Silica 70% ; lime 20% ; other ingredients 10%

Description : For the manufacture of Portland cement, the proportions of raw materials used, are (A) Lime 63% ; silica 22% ; other ingredients 15% (B) Lime 22% ; silica 63% ; other ingredients 15% (C) Silica 40% ; lime 40% ; other ingredients 20% (D) Silica 70% ; lime 20% ; other ingredients 10%

Last Answer : Answer: Option A

Low pressure Zeigler process for the manufacture of polythene uses a catalyst which is (A) Ni (B) V2O5 (C) Fe (D) Aluminium triethyl combined with titanium tetrachloride

Description : Low pressure Zeigler process for the manufacture of polythene uses a catalyst which is (A) Ni (B) V2O5 (C) Fe (D) Aluminium triethyl combined with titanium tetrachloride

Last Answer : (D) Aluminium triethyl combined with titanium tetrachloride

Benzoyl chloride is not used as a catalyst in the manufacture of (A) Polystyrene (B) Polyvinyl acetate (C) Polypropylene (D) Polyvinyl chloride-co-vinyl acetate

Description : Benzoyl chloride is not used as a catalyst in the manufacture of (A) Polystyrene (B) Polyvinyl acetate (C) Polypropylene (D) Polyvinyl chloride-co-vinyl acetate

Last Answer : (C) Polypropylene

Which is the most efficient absorbent for SO3 out of the following? (A) 20% oleum (B) 65% oleum (C) 78% H2SO4 (D) 98% H2SO4

Description : Which is the most efficient absorbent for SO3 out of the following? (A) 20% oleum (B) 65% oleum (C) 78% H2SO4 (D) 98% H2SO4

Last Answer : (D) 98% H2SO4

20% oleum means that in 100 kg oleum, there are 20 kg of (A) SO3 and 80kg of H2SO4 (B) H2SO4 and 80kg of SO3 (C) SO3 for each 100 kg of H2SO4 (D) None of these

Description : 20% oleum means that in 100 kg oleum, there are 20 kg of (A) SO3 and 80kg of H2SO4 (B) H2SO4 and 80kg of SO3 (C) SO3 for each 100 kg of H2SO4 (D) None of these

Last Answer : (A) SO3 and 80kg of H2SO4

Catalyst used in the catalytic polymerisation is (A) Phosphoric acid on kieselguhr (B) Aluminium chloride (C) Nickel (D) Vanadium pentoxide

Description : Catalyst used in the catalytic polymerisation is (A) Phosphoric acid on kieselguhr (B) Aluminium chloride (C) Nickel (D) Vanadium pentoxide

Last Answer : (A) Phosphoric acid on kieselguhr

Sulphuric acid solution having a specific gravity of 1.20 at room temperature is used mainly for the (A) Fertiliser manufacture (B) Car battery solution (C) Synthesis of oleum (D) Water treatment

Description : Sulphuric acid solution having a specific gravity of 1.20 at room temperature is used mainly for the (A) Fertiliser manufacture (B) Car battery solution (C) Synthesis of oleum (D) Water treatment

Last Answer : (B) Car battery solution

Which of the following statements are false about benzene? (a) It is a planar molecule with bond angles 120°(b) It is immiscible with water forming the lower layer. (c) It can be converted into cyclohexane by hydrogenation at 200°C in the presence of Ni catalyst. (d) It reacts with ethyl chloride in the presence of aluminium chloride to form ethylbenzene..

Description : Which of the following statements are false about benzene? (a) It is a planar molecule with bond angles 120°. (b) It is immiscible with water forming the lower layer. (c) It can be ... Ni catalyst. (d) It reacts with ethyl chloride in the presence of aluminium chloride to form ethylbenzene.

Last Answer : It is immiscible with water forming the lower layer

Rotary kilns in cement industry are lined with _________bricks. (A) Fireclay (B) Silica (C) Lead (D) High alumina & high magnesia

Description : Rotary kilns in cement industry are lined with _________bricks. (A) Fireclay (B) Silica (C) Lead (D) High alumina & high magnesia

Last Answer : (D) High alumina & high magnesia

Molecular sieves are porous (A) Alumina (B) Silica (C) Synthetic zeolites crystals/metal alumino-silicates (D) None of these

Description : Molecular sieves are porous (A) Alumina (B) Silica (C) Synthetic zeolites crystals/metal alumino-silicates (D) None of these

Last Answer : (C) Synthetic zeolites crystals/metal alumino-silicates

Which of the following adsorbent is used to decolourise yellow glycerine? (A) Silica gel (B) Alumina (C) Fuller's earth (D) Activated carbon

Description : Which of the following adsorbent is used to decolourise yellow glycerine? (A) Silica gel (B) Alumina (C) Fuller's earth (D) Activated carbon

Last Answer : (D) Activated carbon

Scale formation in boiler is controlled by (A) Preheating of feed water (B) Reduction in hardness, silica & alumina in feed water (C) Keeping the pH value of feed water just below 7 (D) Eliminating H2S in feed water

Description : Scale formation in boiler is controlled by (A) Preheating of feed water (B) Reduction in hardness, silica & alumina in feed water (C) Keeping the pH value of feed water just below 7 (D) Eliminating H2S in feed water

Last Answer : (B) Reduction in hardness, silica & alumina in feed water

Which of the following is an adsorbent used for the removal of SO2 from gas/air? (A) Bog iron (B) Limestone powder or alkalised alumina (C) Silica gel (D) Active carbon

Description : Which of the following is an adsorbent used for the removal of SO2 from gas/air? (A) Bog iron (B) Limestone powder or alkalised alumina (C) Silica gel (D) Active carbon

Last Answer : (B) Limestone powder or alkalised alumina

The major constituents of glass are (A) Lime, clay and soda ash (B) Sand, lime and soda ash (C) Silica, alumina and clay (D) Silica, alumina and soda ash

Description : The major constituents of glass are (A) Lime, clay and soda ash (B) Sand, lime and soda ash (C) Silica, alumina and clay (D) Silica, alumina and soda ash

Last Answer : (B) Sand, lime and soda ash

Major component of flint glass is (A) Lead oxide (B) Silica (C) Alumina (D) Soda

Description : Major component of flint glass is (A) Lead oxide (B) Silica (C) Alumina (D) Soda

Last Answer : (A) Lead oxide

The refractory lining of the bottom in a basic electric arc furnace is made of (A) Silica (B) Alumina (C) Magnesia (D) Fireclay

Description : The refractory lining of the bottom in a basic electric arc furnace is made of (A) Silica (B) Alumina (C) Magnesia (D) Fireclay

Last Answer : Option C

DDT should not be allowed to come in contact with iron (during itsmanufacture) to(A) Avoid its decomposition(B) Prevent sulphonation of the monochlorobenzene by the acid catalyst(C) Achieve non-hygroscopic property(D) None of thes

Description : DDT should not be allowed to come in contact with iron (during itsmanufacture) to (A) Avoid its decomposition (B) Prevent sulphonation of the monochlorobenzene by the acid catalyst (C) Achieve non-hygroscopic property (D) None of thes

Last Answer : (A) Avoid its decomposition

Catalyst used in Fischer-Tropsch process is (A) Nickel (B) Zinc oxide (C) Alumina (D) Thorium oxide

Description : Catalyst used in Fischer-Tropsch process is (A) Nickel (B) Zinc oxide (C) Alumina (D) Thorium oxide

Last Answer : (A) Nickel

Catalyst used in steam reforming of naphtha is (A) Bauxite (B) Cobalt (C) Nickel oxide on alumina support (D) Chromium

Description : Catalyst used in steam reforming of naphtha is (A) Bauxite (B) Cobalt (C) Nickel oxide on alumina support (D) Chromium

Last Answer : (C) Nickel oxide on alumina support

__________ catalyst is used in the production of urea from CO2 and NH3 . (A) Vanadium pentoxide (B) No (C) Alumina (D) Nicke

Description : __________ catalyst is used in the production of urea from CO2 and NH3 . (A) Vanadium pentoxide (B) No (C) Alumina (D) Nicke

Last Answer : (B) No

Pick out the wrong statement. (A) Use of different catalysts in a reversible catalytic chemical reaction does not change the equilibrium composition (B) Alumina is added as a promoter to iron catalyst in ammonia synthesis reaction (C) Activation energy for a reaction is obtained from the intercept of the Arrhenius plot (D) Presence of inerts affects the equilibrium conversion of reactants in a chemical reaction

Description : Pick out the wrong statement. (A) Use of different catalysts in a reversible catalytic chemical reaction does not change the equilibrium composition (B) Alumina is added as a promoter to ... Arrhenius plot (D) Presence of inerts affects the equilibrium conversion of reactants in a chemical reaction

Last Answer : (C) Activation energy for a reaction is obtained from the intercept of the Arrhenius plot

Catalyst used in the hydrogenation of oil is (A) Nickel (B) Platinum (C) Iron (D) Alumina

Description : Catalyst used in the hydrogenation of oil is (A) Nickel (B) Platinum (C) Iron (D) Alumina

Last Answer : (A) Nickel

Oxidation of ortho-xylene in presence of __________ catalyst is done to produce phthalic anhydride on commercial scale. (A) Nickel (B) Vanadium (C) Alumina (D) Iron

Description : Oxidation of ortho-xylene in presence of __________ catalyst is done to produce phthalic anhydride on commercial scale. (A) Nickel (B) Vanadium (C) Alumina (D) Iron

Last Answer : (B) Vanadium

Catalyst used in the 'catalytic converter' employed in automobile exhaust line for complete combustion/oxidation of carbon monoxide, nitrogen oxides and hydrocarbons is (A) Alumina (B) Platinum (C) Vanadium pentoxide (D) Iron oxide

Description : Catalyst used in the 'catalytic converter' employed in automobile exhaust line for complete combustion/oxidation of carbon monoxide, nitrogen oxides and hydrocarbons is (A) Alumina (B) Platinum (C) Vanadium pentoxide (D) Iron oxide

Last Answer : Option B

Which of the following is an absorbent? A.silica gel B. activated alumina C. both of the mentioned D. none of the mentioned

Description : Which of the following is an absorbent? A.silica gel B. activated alumina C. both of the mentioned D. none of the mentioned

Last Answer : ANSWER : C

Quartz is a crystalline form of - (1) Alumina (2) Glass (3) Silica (4) Limestone

Description : Quartz is a crystalline form of - (1) Alumina (2) Glass (3) Silica (4) Limestone

Last Answer : (3) Silica Explanation: Quartz is made up of a continuous framework of SiO4 silicon-oxygen tetrahedra, with each oxygen being shared between two tetrahedra, giving an overall formula SiO2. Tridymite ... is a denser polymorph of quartz found in some meteorite impact sites and in metamorphic rocks.

Efflorescence in cement is caused due to an excess of (A) Alumina (B) Iron oxide (C) Silica (D) Alkalis

Description : Efflorescence in cement is caused due to an excess of (A) Alumina (B) Iron oxide (C) Silica (D) Alkalis

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Lime in excess, causes the cement to expand and disintegrate (B) Silica in excess, causes the cement to set slowly (C) Alumina in excess, reduces the strength of the cement (D) All the above

Description : Pick up the correct statement from the following: (A) Lime in excess, causes the cement to expand and disintegrate (B) Silica in excess, causes the cement to set slowly (C) Alumina in excess, reduces the strength of the cement (D) All the above

Last Answer : Answer: Option D

Pick up the correct proportions of chemical ingredients of cement (A) Lime : Silica : Alumina : Iron oxide : 63 : 22 : 6 : 3 (B) Silica : Lime : Alumina : Iron oxide : 63 : 22 : 6 : 3 (C) Alumina : Silica : Lime : Iron oxide : 63 : 22 : 6 : 3 (D) Iron oxide : Alumina : Silica : Lime : 63 : 22 : 6 : 3

Description : Pick up the correct proportions of chemical ingredients of cement (A) Lime : Silica : Alumina : Iron oxide : 63 : 22 : 6 : 3 (B) Silica : Lime : Alumina : Iron oxide : 63 : 22 : 6 : 3 (C) Alumina : Silica : ... oxide : 63 : 22 : 6 : 3 (D) Iron oxide : Alumina : Silica : Lime : 63 : 22 : 6 : 3

Last Answer : Answer: Option A

The minimum percentage of silica, alumina and ferric oxide in lime for white washing, is (A) 20 (B) 15 (C) 5 (D) 0

Description : The minimum percentage of silica, alumina and ferric oxide in lime for white washing, is (A) 20 (B) 15 (C) 5 (D) 0

Last Answer : Answer: Option D

The main ingredient of a good quality brick earth, is (A) Magnesia (B) Lime (C) Silica (D) Alumina

Description : The main ingredient of a good quality brick earth, is (A) Magnesia (B) Lime (C) Silica (D) Alumina

Last Answer : Answer: Option D

The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All the above

Description : The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All the above

Last Answer : Answer: Option D

The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All these

Description : The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All these

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The lime in excess makes the cement unsound and causes the cement to expand and disintegrate (B) The silica in excess makes the cement stronger but its setting time also increases (C) The excess amount of alumina weakens the cement (D) All the above

Description : Pick up the correct statement from the following: (A) The lime in excess makes the cement unsound and causes the cement to expand and disintegrate (B) The silica in excess makes the cement stronger ... time also increases (C) The excess amount of alumina weakens the cement (D) All the above

Last Answer : Answer: Option D