Pick up the correct statement from the following: (A) Lime in excess, causes the cement to expand and disintegrate (B) Silica in excess, causes the cement to set slowly (C) Alumina in excess, reduces the strength of the cement (D) All the above

Pick up the correct statement from the following:
(A) Lime in excess, causes the cement to expand and disintegrate
(B) Silica in excess, causes the cement to set slowly
(C) Alumina in excess, reduces the strength of the cement
(D) All the above
by

1 Answer

Answer :

Answer: Option D
by

Related questions

Pick up the correct statement from the following: (A) The lime in excess makes the cement unsound and causes the cement to expand and disintegrate (B) The silica in excess makes the cement stronger but its setting time also increases (C) The excess amount of alumina weakens the cement (D) All the above

Description : Pick up the correct statement from the following: (A) The lime in excess makes the cement unsound and causes the cement to expand and disintegrate (B) The silica in excess makes the cement stronger ... time also increases (C) The excess amount of alumina weakens the cement (D) All the above

Last Answer : Answer: Option D

Which of the following ingredient of cement when added in excess quantity, causes the cement to set slowly. (a) Lime (b) Silica (c) Alumina (d) Iron oxide

Description : Which of the following ingredient of cement when added in excess quantity, causes the cement to set slowly. (a) Lime (b) Silica (c) Alumina (d) Iron oxide

Last Answer : Lime is a common ingredient in cement. It is typically added in small amounts to help the cement set more quickly. Adding too much lime can cause the cement to set slowly. Alumina, silica, and iron oxide are also common ingredients in cement, but they do not have an effect on the setting time.

Excess lime when added (a) Makes the cement unsound (b) Causes the cement to expand and disintegrate (c) Lowering the clinkering temp of cement (d) Both ‘a’ and ‘b’

Description : Excess lime when added (a) Makes the cement unsound (b) Causes the cement to expand and disintegrate (c) Lowering the clinkering temp of cement (d) Both ‘a’ and ‘b’

Last Answer : (d) Both ‘a’ and ‘b’

Pick up the correct proportions of chemical ingredients of cement (A) Lime : Silica : Alumina : Iron oxide : 63 : 22 : 6 : 3 (B) Silica : Lime : Alumina : Iron oxide : 63 : 22 : 6 : 3 (C) Alumina : Silica : Lime : Iron oxide : 63 : 22 : 6 : 3 (D) Iron oxide : Alumina : Silica : Lime : 63 : 22 : 6 : 3

Description : Pick up the correct proportions of chemical ingredients of cement (A) Lime : Silica : Alumina : Iron oxide : 63 : 22 : 6 : 3 (B) Silica : Lime : Alumina : Iron oxide : 63 : 22 : 6 : 3 (C) Alumina : Silica : ... oxide : 63 : 22 : 6 : 3 (D) Iron oxide : Alumina : Silica : Lime : 63 : 22 : 6 : 3

Last Answer : Answer: Option A

The main ingredients of Portland cement are (A) Lime and silica (B) Lime and alumina (C) Silica and alumina (D) Lime and iron

Description : The main ingredients of Portland cement are (A) Lime and silica (B) Lime and alumina (C) Silica and alumina (D) Lime and iron

Last Answer : Answer: Option A

The proportion of lime, silica, alumina and iron oxide in a Portland cement is (a) 63:22:6:3 (b) 63:22:3:6 (c) 22:63:6:3 (d) All the above

Description : The proportion of lime, silica, alumina and iron oxide in a Portland cement is (a) 63:22:6:3 (b) 63:22:3:6 (c) 22:63:6:3 (d) All the above

Last Answer : (a) 63:22:6:3

The maximum percentage of chemical ingredient of cement is (a) Alumina (b) Iron oxide (c) Lime (d) Silica

Description : The maximum percentage of chemical ingredient of cement is (a) Alumina (b) Iron oxide (c) Lime (d) Silica

Last Answer : (c) Lime

White cement contains less amount of ___________ [ A ] Lime [ B ] Silica [ C ] Alumina [ D ] Iron oxide

Description : White cement contains less amount of ___________ [ A ] Lime [ B ] Silica [ C ] Alumina [ D ] Iron oxide

Last Answer : [ D ] Iron oxide

Efflorescence in cement is caused due to an excess of (A) Alumina (B) Iron oxide (C) Silica (D) Alkalis

Description : Efflorescence in cement is caused due to an excess of (A) Alumina (B) Iron oxide (C) Silica (D) Alkalis

Last Answer : Answer: Option D

Efflorescence in cement is caused due to an excess of [ A ] Alkalies [ B ] Silica [ C ] Iron oxide [ D ] Alumina

Description : Efflorescence in cement is caused due to an excess of [ A ] Alkalies [ B ] Silica [ C ] Iron oxide [ D ] Alumina

Last Answer : [ A ] Alkalies

Pick up the constituent of good brick earth whose excess causes the raw bricks shrink and warp during drying and burning, from the following: (A) Alumina (B) Lime (C) Iron-oxide (D) Magnesia

Description : Pick up the constituent of good brick earth whose excess causes the raw bricks shrink and warp during drying and burning, from the following: (A) Alumina (B) Lime (C) Iron-oxide (D) Magnesia

Last Answer : Answer: Option A

Pick out the wrong statement. (A) High early strength cement are made from materials having high silica to lime ratio (B) The function of gypsum in cement is to enhance its initial setting rate (C) Acid resistant cements are known as silicate cement (D) Major component of greyish Portland cement is tricalcium silicate

Description : Pick out the wrong statement. (A) High early strength cement are made from materials having high silica to lime ratio (B) The function of gypsum in cement is to enhance its initial ... cements are known as silicate cement (D) Major component of greyish Portland cement is tricalcium silicate

Last Answer : (A) High early strength cement are made from materials having high silica to lime ratio

Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2

Description : Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2

Last Answer : Option A

The main ingredients of Portland cement are a) Lime and silica* b) Lime and Alumina c) Alumina magnesia d) Silica and Alumina

Description : The main ingredients of Portland cement are a) Lime and silica* b) Lime and Alumina c) Alumina magnesia d) Silica and Alumina

Last Answer : a) Lime and silica*

Efflorescence is cement is caused due to the excess of (a) Lime (b) Silica (c) Alkalies (d) Iron oxide

Description : Efflorescence is cement is caused due to the excess of (a) Lime (b) Silica (c) Alkalies (d) Iron oxide

Last Answer : (c) Alkalies

Pick up the correct statement from the following: (A) The quality of water governs the strength of concrete (B) 10% excess of water reduces the strength of concrete by 15% (C) 30% excess of water reduces the strength of concrete by 50% (D) All the above

Description : Pick up the correct statement from the following: (A) The quality of water governs the strength of concrete (B) 10% excess of water reduces the strength of concrete by 15% (C) 30% excess of water reduces the strength of concrete by 50% (D) All the above

Last Answer : Answer: Option D

In order to provide colour, hardness and strength to the cement, the ingredient used is (a) Lime (b) Solica (c) Alumina (d) Iron oxide

Description : In order to provide colour, hardness and strength to the cement, the ingredient used is (a) Lime (b) Solica (c) Alumina (d) Iron oxide

Last Answer : (d) Iron oxide

Which of the following pairs gives a correct combination of the useful and harmful constituents respectively of a good brick earth? (A) Lime stone and alumina (B) Silica and alkalies (C) Alumina and iron (D) Alkalies and magnesium

Description : Which of the following pairs gives a correct combination of the useful and harmful constituents respectively of a good brick earth? (A) Lime stone and alumina (B) Silica and alkalies (C) Alumina and iron (D) Alkalies and magnesium

Last Answer : Answer: Option B

The minimum percentage of silica, alumina and ferric oxide in lime for white washing, is (A) 20 (B) 15 (C) 5 (D) 0

Description : The minimum percentage of silica, alumina and ferric oxide in lime for white washing, is (A) 20 (B) 15 (C) 5 (D) 0

Last Answer : Answer: Option D

The main ingredient of a good quality brick earth, is (A) Magnesia (B) Lime (C) Silica (D) Alumina

Description : The main ingredient of a good quality brick earth, is (A) Magnesia (B) Lime (C) Silica (D) Alumina

Last Answer : Answer: Option D

The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All the above

Description : The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All the above

Last Answer : Answer: Option D

The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All these

Description : The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All these

Last Answer : Answer: Option D

A good brick earth should contain: (A) About 20% to 30% of alumina (B) About 50% to 60% of silica (C) Not more than 5% of lime (D) All the above

Description : A good brick earth should contain: (A) About 20% to 30% of alumina (B) About 50% to 60% of silica (C) Not more than 5% of lime (D) All the above

Last Answer : Answer: Option D

Pick up the incorrect statement from the following: (A) With passage of time, the strength of cement increases (B) With passage of time, the strength of cement decreases (C) After a period of 24 months, the strength of cement reduces to 50% (D) The concrete made with storage deteriorated cement, gains strength with time

Description : Pick up the incorrect statement from the following: (A) With passage of time, the strength of cement increases (B) With passage of time, the strength of cement decreases (C) After a ... of cement reduces to 50% (D) The concrete made with storage deteriorated cement, gains strength with time

Last Answer : Answer: Option A

Rapid hardening cement attains early strength due to (A) Larger proportion of lime grounded finer than normal cement (B) Lesser proportion of lime grounded coarser than normal cement (C) Lesser proportion of lime grounded finer than normal cement (D) Excess percentage of gypsum

Description : Rapid hardening cement attains early strength due to (A) Larger proportion of lime grounded finer than normal cement (B) Lesser proportion of lime grounded coarser than normal cement (C) Lesser proportion of lime grounded finer than normal cement (D) Excess percentage of gypsum

Last Answer : Answer: Option A

Pick up the correct statement from the following: (A) The percentage of absorption for firebricks varies from 5 to 10 (B) The percentage of silica in silica bricks is to the extent of about 95 to 97 percent (C) Roughly 1 to 2 percent of lime in silica bricks is added to act as binding material (D) All the above

Description : Pick up the correct statement from the following: (A) The percentage of absorption for firebricks varies from 5 to 10 (B) The percentage of silica in silica bricks is to the extent of about 95 to 97 ... to 2 percent of lime in silica bricks is added to act as binding material (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The concrete gains strength due to hydration of cement (B) The concrete does not set at freezing point (C) The strength of concrete increases with its age (D) All the above

Description : Pick up the correct statement from the following: (A) The concrete gains strength due to hydration of cement (B) The concrete does not set at freezing point (C) The strength of concrete increases with its age (D) All the above

Last Answer : Answer: Option D

The major constituents of glass are (A) Lime, clay and soda ash (B) Sand, lime and soda ash (C) Silica, alumina and clay (D) Silica, alumina and soda ash

Description : The major constituents of glass are (A) Lime, clay and soda ash (B) Sand, lime and soda ash (C) Silica, alumina and clay (D) Silica, alumina and soda ash

Last Answer : (B) Sand, lime and soda ash

Which of the following constituents impart plasticity to brick earth a) Alumina* b) Silica c) Lime d) Magnesia

Description : Which of the following constituents impart plasticity to brick earth a) Alumina* b) Silica c) Lime d) Magnesia

Last Answer : a) Alumina*

The minimum percentage of chemical ingredient of cement is that of (A) Magnesium oxide (B) Iron oxide (C) Alumina (D) Lime

Description : The minimum percentage of chemical ingredient of cement is that of (A) Magnesium oxide (B) Iron oxide (C) Alumina (D) Lime

Last Answer : Answer: Option A

Chief constituent of ordinary Portland cement is [ A ] Lime [ B ] Alumina [ C ] Magnesia [ D ] Iron oxide

Description : Chief constituent of ordinary Portland cement is [ A ] Lime [ B ] Alumina [ C ] Magnesia [ D ] Iron oxide

Last Answer : [ A ] Lime

Pick up the incorrect statement from the following: (A) Hydraulic lime is generally obtained by burning kankar (B) Hydraulic lime sets slowly as compared to fat lime (C) Hydraulic lime is generally used in lime mortar (D) None of these

Description : Pick up the incorrect statement from the following: (A) Hydraulic lime is generally obtained by burning kankar (B) Hydraulic lime sets slowly as compared to fat lime (C) Hydraulic lime is generally used in lime mortar (D) None of these

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Due to boiling, the bacterias present in water can be destroyed (B) Lime may be used for softening hard water (C) Excess lime when added to water, raises the pH value of water (D) All the above

Description : Pick up the correct statement from the following:  (A) Due to boiling, the bacterias present in water can be destroyed  (B) Lime may be used for softening hard water  (C) Excess lime when added to water, raises the pH value of water  (D) All the above 

Last Answer : (D) All the above 

Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming process (C) The most ideal feedstock for thermal reforming is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Description : Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming ... is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Last Answer : (C) The most ideal feedstock for thermal reforming is dearomatised kerosene

The maximum percentage of chemical ingredient of cement is that of (A) Magnesium oxide (B) Iron oxide (C) Silica (D) Lime

Description : The maximum percentage of chemical ingredient of cement is that of (A) Magnesium oxide (B) Iron oxide (C) Silica (D) Lime

Last Answer : Answer: Option D

For the manufacture of Portland cement, the proportions of raw materials used, are (A) Lime 63% ; silica 22% ; other ingredients 15% (B) Lime 22% ; silica 63% ; other ingredients 15% (C) Silica 40% ; lime 40% ; other ingredients 20% (D) Silica 70% ; lime 20% ; other ingredients 10%

Description : For the manufacture of Portland cement, the proportions of raw materials used, are (A) Lime 63% ; silica 22% ; other ingredients 15% (B) Lime 22% ; silica 63% ; other ingredients 15% (C) Silica 40% ; lime 40% ; other ingredients 20% (D) Silica 70% ; lime 20% ; other ingredients 10%

Last Answer : Answer: Option A

The minimum percentage of chemical ingredient of cement is [ A ] Iron oxide [ B ] Silica [ C ] Lime [ D ] Magnesium oxide

Description : The minimum percentage of chemical ingredient of cement is [ A ] Iron oxide [ B ] Silica [ C ] Lime [ D ] Magnesium oxide

Last Answer : [ D ] Magnesium oxide

The maximum percentage of chemical ingredient of cement is [ A ] Iron oxide [ B ] Silica [ C ] Lime [ D ] Magnesium oxide

Description : The maximum percentage of chemical ingredient of cement is [ A ] Iron oxide [ B ] Silica [ C ] Lime [ D ] Magnesium oxide

Last Answer : [ C ] Lime

Pick up the correct statement from the following: (A) Bricks are paid per thousand (B) Cement is paid per 50 kg bag (C) Lime is paid per quintal (D) All the above

Description : Pick up the correct statement from the following: (A) Bricks are paid per thousand (B) Cement is paid per 50 kg bag (C) Lime is paid per quintal (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) Lime mortar with cement in the ratio of in 10 is cheaper and better for outside plaster (B) For very cold or very hot climate, a compact and closed plan should be provided (C) On the sea coast, an exposed and open house is generally preferred (D) All the above

Description : Pick up the correct statement from the following: (A) Lime mortar with cement in the ratio of in 10 is cheaper and better for outside plaster (B) For very cold or very hot climate, a compact and closed ... (C) On the sea coast, an exposed and open house is generally preferred (D) All the above

Last Answer : Answer: Option D

Rotary kilns in cement industry are lined with _________bricks. (A) Fireclay (B) Silica (C) Lead (D) High alumina & high magnesia

Description : Rotary kilns in cement industry are lined with _________bricks. (A) Fireclay (B) Silica (C) Lead (D) High alumina & high magnesia

Last Answer : (D) High alumina & high magnesia

The presence of lime in cement (a) Make s the cement sound and provides strength to the cement. (b) Prolong the setting time (c) Causes unsoundness in cement (d) All the above

Description : The presence of lime in cement (a) Make s the cement sound and provides strength to the cement. (b) Prolong the setting time (c) Causes unsoundness in cement (d) All the above

Last Answer : (a) Make s the cement sound and provides strength to the cement.

Select incorrect statement from the following [ A ] With passage of time, the strength of cement decreases [ B ] With passage of time, the strength of cement increases [ C ] After a period of 24 months, the strength of cement reduces to 50% [ D ] The concrete made with storage deteriorated cement; gains strength with time.

Description : Select incorrect statement from the following [ A ] With passage of time, the strength of cement decreases [ B ] With passage of time, the strength of cement increases [ C ] After a period ... cement reduces to 50% [ D ] The concrete made with storage deteriorated cement; gains strength with time.

Last Answer : [ B ] With passage of time, the strength of cement increases

Which of the following cements is expected to have the highest compressive strength after 3 days (a) Ordinary Portland cement (b) Rapid hardening cement (c) High alumina cement (d) Sulphate resisting cement.

Description : Which of the following cements is expected to have the highest compressive strength after 3 days (a) Ordinary Portland cement (b) Rapid hardening cement (c) High alumina cement (d) Sulphate resisting cement.

Last Answer : (c) High alumina cement

Soundness test of cement is done to determine its a) Durability in seawater b) Free lime content* c) Iron oxide content d) Alumina content

Description : Soundness test of cement is done to determine its a) Durability in seawater b) Free lime content* c) Iron oxide content d) Alumina content

Last Answer : b) Free lime content*

The cement becomes unsound by the presence of excess (A) Sulphur (B) Magnesia (C) Lime (D) All of these

Description : The cement becomes unsound by the presence of excess (A) Sulphur (B) Magnesia (C) Lime (D) All of these

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Water enables chemical reaction to take place with cement (B) Water lubricates the mixture of gravel, sand and cement (C) Strength of concrete structure largely depends upon its workability (D) All the above

Description : Pick up the correct statement from the following: (A) Water enables chemical reaction to take place with cement (B) Water lubricates the mixture of gravel, sand and cement (C) Strength of concrete structure largely depends upon its workability (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) Water cement paste hardens due to hydration (B) During hardening cement binds the aggregates together (C) Cement provides strength, durability and water tightness to the concrete (D) All the above

Description : Pick up the correct statement from the following: (A) Water cement paste hardens due to hydration (B) During hardening cement binds the aggregates together (C) Cement provides strength, durability and water tightness to the concrete (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement regarding low heat cement from the following: (A) It possesses less compressive strength (B) Its initial setting time is about one hour (C) Its final setting time is about 10 hours (D) All the above

Description : Pick up the correct statement regarding low heat cement from the following: (A) It possesses less compressive strength (B) Its initial setting time is about one hour (C) Its final setting time is about 10 hours (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C) Curing of concrete is done for proper compaction of cement (D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Description : Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C ... D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Last Answer : Option D