Description : The catalyst used in shift converter is (A) Nickel (B) Vanadium (C) Silica gel (D) Alumina
Last Answer : (A) Nickel
Description : Catalyst used in the catalytic cracking is (A) Silica-alumina (B) Silica gel (C) Vanadium pentoxide (D) Nickel
Last Answer : (A) Silica-alumina
Description : Catalyst used in Haber's process for ammonia production is (A) Reduced iron oxide (B) Nickel (C) Vanadium pentoxide (D) Silica gel
Last Answer : (A) Reduced iron oxide
Description : Catalyst used in alkylation process is (A) Sulphuric acid (B) Nickel (C) Silica gel (D) Alumina
Last Answer : (A) Sulphuric acid
Description : The catalyst used in the production of elemental sulphur from H2S (by oxidation-reduction) is (A) Alumina (B) Silica gel (C) Platinum (D) Nickel
Last Answer : (A) Alumina
Description : Catalyst used in the 'catalytic converter' employed in automobile exhaust line for complete combustion/oxidation of carbon monoxide, nitrogen oxides and hydrocarbons is (A) Alumina (B) Platinum (C) Vanadium pentoxide (D) Iron oxide
Last Answer : Option B
Description : Catalyst used in the manufacture of NH3 by Haber's process is finely divided (A) Nickel (B) Iron (C) Vanadium pentoxide (D) Alumina
Last Answer : (B) Iron
Description : Oxidation of ortho-xylene in presence of __________ catalyst is done to produce phthalic anhydride on commercial scale. (A) Nickel (B) Vanadium (C) Alumina (D) Iron
Last Answer : (B) Vanadium
Description : . Catalyst used in the catalytic converter employed in automobiles to convert CO into CO2 and for complete oxidation of un-burnt hydrocarbons is (A) Nickel (B) Cobalt (C) Vanadium (D) Platinum
Last Answer : (D) Platinum
Description : Catalyst used in desulphurisation of naphtha is (A) Co-Mo (B) Pt-Rh (C) Silica gel (D) Nickel
Last Answer : (A) Co-Mo
Description : Catalyst used in steam reforming of naphtha is (A) Nickel (B) Platinum (C) Silica gel (D) Rhodium
Description : __________ catalyst is used in the production of urea from CO2 and NH3 . (A) Vanadium pentoxide (B) No (C) Alumina (D) Nicke
Last Answer : (B) No
Description : Which of the following adsorbent is used to decolourise yellow glycerine? (A) Silica gel (B) Alumina (C) Fuller's earth (D) Activated carbon
Last Answer : (D) Activated carbon
Description : Which of the following is an adsorbent used for the removal of SO2 from gas/air? (A) Bog iron (B) Limestone powder or alkalised alumina (C) Silica gel (D) Active carbon
Last Answer : (B) Limestone powder or alkalised alumina
Description : Catalyst used in the catalytic polymerisation is (A) Phosphoric acid on kieselguhr (B) Aluminium chloride (C) Nickel (D) Vanadium pentoxide
Last Answer : (A) Phosphoric acid on kieselguhr
Description : Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming ... is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base
Last Answer : (C) The most ideal feedstock for thermal reforming is dearomatised kerosene
Description : . Which of the following is used as a catalyst in fluidised bed catalytic cracking? (A) Silica-magnesia (B) Silica-alumina (C) Bentonite clays (D) All (A), (B) and (C
Last Answer : (D) All (A), (B) and (C
Description : The catalyst used in the manufacture of DDT is (A) Alumina (B) Silica (C) 20% oleum (D) Aluminium chloride
Last Answer : (C) 20% oleum
Description : Which of the following is an absorbent? A.silica gel B. activated alumina C. both of the mentioned D. none of the mentioned
Last Answer : ANSWER : C
Description : Which of the following is commonly used as liquid absorbent? a. Silica gel b. Activated alumina c. Ethylene glycol d. None of these
Last Answer : Ethylene glycol
Description : Catalyst used in catalytic reforming is (A) Platinum on alumina (B) Nickel (C) Iron (D) Aluminium chloride
Last Answer : (A) Platinum on alumina
Description : Catalyst used in the isomerisation is (A) Aluminium chloride (B) Alumina (C) Nickel (D) Phosphoric acid
Last Answer : (A) Aluminium chloride
Description : Catalyst used in Fischer-Tropsch process is (A) Nickel (B) Zinc oxide (C) Alumina (D) Thorium oxide
Description : Catalyst used in steam reforming of naphtha is (A) Bauxite (B) Cobalt (C) Nickel oxide on alumina support (D) Chromium
Last Answer : (C) Nickel oxide on alumina support
Description : Catalyst used in the hydrogenation of oil is (A) Nickel (B) Platinum (C) Iron (D) Alumina
Description : Nickel is not used as a catalyst in the __________ reaction. (A) Shift conversion (B) Oil hydrogenation (C) Steaming reforming of naphtha (D) Ammonia cracking/dissociation
Last Answer : (A) Shift conversion
Description : Nickel is not used as a catalyst in the (A) Fischer-Tropsch process (B) Shift conversion (C) Hydrogenation of oil (D) Ostwald's process of HNO3 manufacture
Last Answer : (D) Ostwald's process of HNO3 manufacture
Description : In the manufacture of H2SO4 , vanadium catalyst as compared to platinum catalyst (A) Gives higher conversion efficiency (B) Has a longer life and is not poisoned by arsenic (C) Handles lower SO2 content gas (7 -10% SO2 ), thus increasing the capital cost of the plant (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : __________ is added in stainless steel to prevent inter crystal corrosion. (A) Vanadium (B) Niobium (C) Chromium (D) Nickel
Last Answer : (B) Niobium
Description : Corrosion resistance of steel is increased by the addition of (A) Phosphorous and tungsten (B) Nickel and chromium (C) Lead and vanadium (D) Molybdenum and tungsten
Last Answer : (B) Nickel and chromium
Description : Addition of __________ in steel can help in increasing the depth of hardness. (A) Nickel (B) Chromium (C) Vanadium (D) Tungsten
Last Answer : (D) Tungsten
Description : Constituents of stellite are (A) Zinc, copper and nickel (B) Cobalt, chromium and tungsten (C) Zinc, aluminium and nickel (D) Nickel, cobalt and vanadium
Last Answer : (B) Cobalt, chromium and tungsten
Description : Stainless steel contains (A) Chromium and nickel (B) Copper (C) Aluminium (D) Vanadium
Last Answer : (A) Chromium and nickel
Description : Which of the following has a very high carbide forming tendency in steels? (A) Silicon (B) Chromium (C) Nickel (D) Vanadium
Last Answer : (D) Vanadium
Description : Constituents of stellite are (A) Zinc, copper & nickel (B) Cobalt, chromium & tungsten (C) Zinc, aluminium & nickel (D) Nickel, cobalt & vanadium
Last Answer : (B) Cobalt, chromium & tungsten
Description : All of the following alloying elements of steel increases hardness but sacrifice ductility, except (A) Nickel (B) Vanadium (C) Molybdenum (D) Chromium
Description : Nickel and __________ are the alloying element added in steel to increase its toughness. (A) Molybdenum (B) Chromium (C) Vanadium (D) Silicon
Last Answer : Option D
Description : Rotary kilns in cement industry are lined with _________bricks. (A) Fireclay (B) Silica (C) Lead (D) High alumina & high magnesia
Last Answer : (D) High alumina & high magnesia
Description : Molecular sieves are porous (A) Alumina (B) Silica (C) Synthetic zeolites crystals/metal alumino-silicates (D) None of these
Last Answer : (C) Synthetic zeolites crystals/metal alumino-silicates
Description : Scale formation in boiler is controlled by (A) Preheating of feed water (B) Reduction in hardness, silica & alumina in feed water (C) Keeping the pH value of feed water just below 7 (D) Eliminating H2S in feed water
Last Answer : (B) Reduction in hardness, silica & alumina in feed water
Description : The major constituents of glass are (A) Lime, clay and soda ash (B) Sand, lime and soda ash (C) Silica, alumina and clay (D) Silica, alumina and soda ash
Last Answer : (B) Sand, lime and soda ash
Description : Major component of flint glass is (A) Lead oxide (B) Silica (C) Alumina (D) Soda
Last Answer : (A) Lead oxide
Description : The refractory lining of the bottom in a basic electric arc furnace is made of (A) Silica (B) Alumina (C) Magnesia (D) Fireclay
Last Answer : Option C
Description : Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2
Last Answer : Option A
Description : The most common filter aid is (A) Diatomaceous earth (B) Calcium silicate (C) Sodium carbonate (D) Silica gel
Last Answer : (A) Diatomaceous earth
Description : At equilibrium the concentration of water in vapour phase (C* ) in kg/m3 of air space and the amount of water (m) adsorbed per kg of dry silica gel are related by, C* = 0.0667m. To maintain dry conditions in a room ... which the temperature is maintained constant) is (A) 0.0 (B) 0.2 (C) 0.4 (D) 1.0
Last Answer : (C) 0.4
Description : Which of the following adsorbent is used in the refining of sugar? (A) Bone charcoal (B) Wood charcoal (C) Silica gel (D) Activated clay
Last Answer : (A) Bone charcoal
Description : Large quantity of silica gel is normally dried in a __________ dryer. (A) Freeze (B) Through circulation (C) Rotary vacuum (D) Tray
Last Answer : (B) Through circulation
Description : Which adsorbent is used for removing sulphur compounds (S Q, H2S, RSH etc.) removal from coke oven gas in by-products recovery plant? (A) Silica gel (B) Diatomaceous earth (C) Basalt (D) Bog iron (i.e., moist ferric hydroxide)
Last Answer : (D) Bog iron (i.e., moist ferric hydroxide)
Description : Coke oven gas is stripped of its H2S and mercaptans content by (A) Absorption in wash oil (B) Adsorption on bog iron bed (C) Bubbling it through dilute sulphuric acid (D) Adsorption on silica gel
Last Answer : (B) Adsorption on bog iron bed