Sphericity of raschig ring (whose length and diameter are equal) is (A) > 1 (B) < 1 (C) 1 (D) 2

Sphericity of raschig ring (whose length and diameter are equal) is
(A) > 1
(B) < 1
(C) 1
(D) 2
by

1 Answer

Answer :

(C) 1
by

Related questions

For raschig rings, the sphericity is (A) 0.5 (B) 1 (C) < 1

Description : For raschig rings, the sphericity is (A) 0.5 (B) 1 (C) < 1

Last Answer : (C) < 1

Sphericity is the ratio of the surface area of a spherical particle having the same volume as the particle to the surface area of the particle. Which of the following has the maximum value of sphericity? (A) Sphere(B) Cube(C) Cylinder (L/D = 1)(D) Raschig rings

Description : Sphericity is the ratio of the surface area of a spherical particle having the same volume as the particle to the surface area of the particle. Which of the following has the maximum value of sphericity? (A) Sphere (B) Cube (C) Cylinder (L/D = 1) (D) Raschig rings

Last Answer : (A) Sphere

Diameter to height ratio for a raschig ring is (A) 1 (B) 0.5 (C) 2 (D) 8

Description : Diameter to height ratio for a raschig ring is (A) 1 (B) 0.5 (C) 2 (D) 8

Last Answer : (A) 1

The sphericity of a cylinder of 1 mm diameter and length 3 mm is (A) 0.9 (B) 0.78 (C) 0.6 (D) 0.5

Description : The sphericity of a cylinder of 1 mm diameter and length 3 mm is (A) 0.9 (B) 0.78 (C) 0.6 (D) 0.5

Last Answer : (A) 0.9

Raschig ring made of porcelain cannot be used for treating concentrated (A) Hydrochloric acid (B) Nitric acid (C) Alkalis (D) Sulphuric acid

Description : Raschig ring made of porcelain cannot be used for treating concentrated (A) Hydrochloric acid (B) Nitric acid (C) Alkalis (D) Sulphuric acid

Last Answer : (C) Alkalis

Diameter of raschig rings used in packed tower in industry is normally around __________ inches. (A) 2 (B) 8 (C) 12 (D) 18

Description : Diameter of raschig rings used in packed tower in industry is normally around __________ inches. (A) 2 (B) 8 (C) 12 (D) 18

Last Answer : (A) 2

If dp is the equivalent diameter of a non-spherical particle, Vp its volume and sp its surface area, then its sphericity is φs is defined by (A) φs = 6 Vp /dpsp (B) φs = Vp /dpsp (C) φs = 6 dpSp /Vp (D) φs = dpSp /Vp

Description : If dp is the equivalent diameter of a non-spherical particle, Vp its volume and sp its surface area, then its sphericity is φs is defined by (A) φs = 6 Vp /dpsp (B) φs = Vp /dpsp (C) φs = 6 dpSp /Vp (D) φs = dpSp /Vp

Last Answer : (A) φs = 6 Vp /dpsp

Sphericity of a cubical particle, when its equivalent diameter is taken as the height of the cube, is (A) 0.5 (B) 1 (C) √2 (D) √3

Description : Sphericity of a cubical particle, when its equivalent diameter is taken as the height of the cube, is (A) 0.5 (B) 1 (C) √2 (D) √3

Last Answer : (B) 1

Sphericity for a non-spherical particle is given by (where, V and S are volume and surface area respectively of one particle. and, D = equivalent diameter of particle). (A) 6.V/D.S(B) V/6D.S (C) D.S/V (D) V/D.S

Description : Sphericity for a non-spherical particle is given by (where, V and S are volume and surface area respectively of one particle. and, D = equivalent diameter of particle). (A) 6.V/D.S (B) V/6D.S (C) D.S/V (D) V/D.S

Last Answer : (B) V/6D.S (C) D.S/V (D) V/D.S

Reciprocal of sphericity is termed as the (A) Specific surface ratio (B) Shape factor (C) Sauter diameter (D) Surface area per unit mass

Description : Reciprocal of sphericity is termed as the (A) Specific surface ratio (B) Shape factor (C) Sauter diameter (D) Surface area per unit mass

Last Answer : (B) Shape factor

For a non-spherical particle, the sphericity (A) Is defined as the ratio of surface area of a sphere having the same volume as the particle to the actual surface area of the particle (B) Has the dimension of length (C) Is always less than 1 (D) Is the ratio of volume of a sphere having the same surface area as the particle to the actual volume of the particle

Description : For a non-spherical particle, the sphericity (A) Is defined as the ratio of surface area of a sphere having the same volume as the particle to the actual surface area of the particle (B) Has ... of volume of a sphere having the same surface area as the particle to the actual volume of the particle

Last Answer : (A) Is defined as the ratio of surface area of a sphere having the same volume as the particle to the actual surface area of the particle

The most common packing used in industrial operations is __________ rings. (A) Raschig (B) Lessing (C) Cross-partition (D) Single spiral

Description : The most common packing used in industrial operations is __________ rings. (A) Raschig (B) Lessing (C) Cross-partition (D) Single spiral

Last Answer : (C) Cross-partition

Use of raschig rings in place of crushed stones as packing in packed beds (other things being same) (A) Increases pressure drop, increases surface area (B) Increases pressure drop, decreases surface area (C) Decreases pressure drop, increases surface area (D) Decreases pressure drop, decreases surface area

Description : Use of raschig rings in place of crushed stones as packing in packed beds (other things being same) (A) Increases pressure drop, increases surface area (B) Increases pressure drop, decreases ... (C) Decreases pressure drop, increases surface area (D) Decreases pressure drop, decreases surface area

Last Answer : (C) Decreases pressure drop, increases surface area

Pick out the correct statement. (A) Fanning friction factor is inversely proportional to Reynolds number always (B) The property of a randomly packed bed (with raschig rings) is given by the ratio of the total volume to the volume of voids in the bed (C) Mach number in an incompressible fluid is always unity (D) Mach number is given by the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Description : Pick out the correct statement. (A) Fanning friction factor is inversely proportional to Reynolds number always (B) The property of a randomly packed bed (with raschig rings) is given by the ratio of the ... the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Last Answer : (D) Mach number is given by the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Which of the following ceramic packing materials is the costliest of all? (A) Berl saddles (B) Raschig rings (C) Pall rings (D) Intalox saddles

Description : Which of the following ceramic packing materials is the costliest of all? (A) Berl saddles (B) Raschig rings (C) Pall rings (D) Intalox saddles

Last Answer : Berl saddles

The sphericity of a solid particle of cubical shape is (A) π (B) (π/6) 1/3 (C) (π/6) 1/2 (D) π/3

Description : The sphericity of a solid particle of cubical shape is (A) π (B) (π/6) 1/3 (C) (π/6) 1/2 (D) π/3

Last Answer : (B) (π/6) 1/3 (C) (π/6) 1/2

Sphericity of pulverised coal is (A) 1 (B) < 1 (C) > 1 (D) ∞

Description : Sphericity of pulverised coal is (A) 1 (B) < 1 (C) > 1 (D) ∞

Last Answer : (B) < 1

Shape factor for a cylinder whose length equals its diameter is (A) 1.5 (B) 0.5 (C) 1.0 (D) 2.0

Description : Shape factor for a cylinder whose length equals its diameter is (A) 1.5 (B) 0.5 (C) 1.0 (D) 2.0

Last Answer : (A) 1.5

A copper wire 4 mm in diameter is evenly wound about a cylinder whose length is 24 cm and diameter 20 cm so as to cover the surface. -Maths 9th

Description : A copper wire 4 mm in diameter is evenly wound about a cylinder whose length is 24 cm and diameter 20 cm so as to cover the surface. -Maths 9th

Last Answer : answer:

The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose ends are hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2 , the permissible maximum crippling load will be (A) 1.288 tonnes (B) 12.88 (C) 128.8 tonnes (D) 288.0

Description : The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose ends are hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2 , the permissible maximum crippling load will be (A) 1.288 tonnes (B) 12.88 (C) 128.8 tonnes (D) 288.0

Last Answer : (B) 12.88

The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose endsare hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2, the permissible maximumcrippling load will be (a) 1.288 tonnes (b) 12.88 (c) 128.8 tonnes (d) 288.0

Description : The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose endsare hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2, the permissible maximumcrippling load will be (a) 1.288 tonnes (b) 12.88 (c) 128.8 tonnes (d) 288.0

Last Answer : (b) 12.88

Three solid objects of the same material and of equal mass-a sphere, a cylinder (length = diameter) and a cube are at 500°C initially. These are dropped in a quenching bath containing a large volume of cooling oil each attaining the bath temperature eventually. The time required for 90% change in temperature is the smallest for (A) Cube (B) Cylinder (C) Sphere (D) Equal for all the three

Description : Three solid objects of the same material and of equal mass-a sphere, a cylinder (length = diameter) and a cube are at 500°C initially. These are dropped in a quenching bath containing a large volume of cooling oil ... (A) Cube (B) Cylinder (C) Sphere (D) Equal for all the three

Last Answer : (A) Cube

Transition length for turbulent flow in smooth pipe is equal to __________ times the pipe diameter. (A) 0.5 (B) 5 (C) 50 (D) 500

Description : Transition length for turbulent flow in smooth pipe is equal to __________ times the pipe diameter. (A) 0.5 (B) 5 (C) 50 (D) 500

Last Answer : (C) 50

Two cans have the same height equal to 21 cm. One can is cylindrical, the diameter of whose base is 10 cm. -Maths 9th

Description : Two cans have the same height equal to 21 cm. One can is cylindrical, the diameter of whose base is 10 cm. -Maths 9th

Last Answer : (c) 450 cm3. Required difference in capacities = 227227 x (5)2 x 21~ (10)2 x 21 = (1650 ~ 2100) cm3 = 450 cm3

From a wooden cylindrical block, whose diameter is equal to its height, a sphere of maximum possible volume is carved out. -Maths 9th

Description : From a wooden cylindrical block, whose diameter is equal to its height, a sphere of maximum possible volume is carved out. -Maths 9th

Last Answer : answer:

A semi-circle of diameter 14 cm has three chords of equal length connecting the two end points of the diameter so as -Maths 9th

Description : A semi-circle of diameter 14 cm has three chords of equal length connecting the two end points of the diameter so as -Maths 9th

Last Answer : (c)\(\bigg(rac{147 imes\sqrt3}{4}\bigg)\) cm2Take the trapezoid ABCD in the semi-circle with centre O such that AD = DC = CB. Now, complete the circle and draw an identical trapezoid in the other semicircle also. Then, ADCBEF ... {1}{2}\)x \(rac{3\sqrt3}{2}\) x 49 = \(rac{147 imes\sqrt3}{4}\) cm2.

The ratio of the length and diameter of a simply supported uniform circular beam which experiences maximum bending stress equal to tensile stress due to same load at its mid span, is (A) 1/8 (B) 1/4 (C) 1/2 (D) 1/3

Description : The ratio of the length and diameter of a simply supported uniform circular beam which  experiences maximum bending stress equal to tensile stress due to same load at its mid span, is  (A) 1/8  (B) 1/4  (C) 1/2  (D) 1/3 

Last Answer : (C) 1/2 

Select the wrong statement (A) An equivalent pipe is treated as an ordinary pipe for all calculations (B) The length of an equivalent pipe is equal to that of a compound pipe (C) The discharge through an equivalent pipe is equal to that of a compound pipe (D) The diameter of an equivalent pipe is equal to that of a compound pipe

Description : Select the wrong statement (A) An equivalent pipe is treated as an ordinary pipe for all calculations (B) The length of an equivalent pipe is equal to that of a compound pipe (C) The discharge ... of a compound pipe (D) The diameter of an equivalent pipe is equal to that of a compound pipe

Last Answer : Answer: Option D

The weaving length of a roadway is the distance (A) Between the channelizing islands (B) Equal to half circumference (C) Equal to total width of adjoining radial roads (D) Equal to diameter of rotary

Description : The weaving length of a roadway is the distance (A) Between the channelizing islands (B) Equal to half circumference (C) Equal to total width of adjoining radial roads (D) Equal to diameter of rotary

Last Answer : Answer: Option A

When a ring of metal is heated what happens to its hole? (1) expands (2) contracts (3) it expands or contracts according to its diameter (4) it expands or contracts according to its coefficient of expansion

Description : When a ring of metal is heated what happens to its hole? (1) expands (2) contracts (3) it expands or contracts according to its diameter (4) it expands or contracts according to its coefficient of expansion

Last Answer : (1) expands Explanation: The hole size will increase because in expansion the size between two molecules, do not increase so when the molecules on the outer edge move outward. Due to expansion, the ... expansion is the tendency of matter to change in volume in response to a change in temperature.

In Newton's ring experiment, the diameter of the 15 th ring was found to be 0.590 and that of the 5 th ring was 0.336 cm. If the radius of Plano convex lens is 100 cm, compute the wavelength of light used. A. 5885 A 0 B. 5880 A o C. 5890 A o D.5850 A

Description : In Newton's ring experiment, the diameter of the 15 th ring was found to be 0.590 and that of the 5 th ring was 0.336 cm. If the radius of Plano convex lens is 100 cm, compute the wavelength of light used. A. 5885 A 0 B. 5880 A o C. 5890 A o D.5850 A

Last Answer : B. 5880 A o

In Newton's Ring experiments , the diameter of dark rings is proportional to A. Odd Natural numbers B. Natural Number C. Even Natural Number D. Square root of natural number

Description : In Newton's Ring experiments , the diameter of dark rings is proportional to A. Odd Natural numbers B. Natural Number C. Even Natural Number D. Square root of natural number

Last Answer : In Newton's Ring experiments , the diameter of dark rings is proportional to A. Odd Natural numbers B. Natural Number C. Even Natural Number D. Square root of natural number

n Newton's Ring experiments , the diameter of bright rings is proportional to A. Square root of Odd Natural numbers B. Natural Number C. Even Natural Number D. Square root of natural number

Description : n Newton's Ring experiments , the diameter of bright rings is proportional to A. Square root of Odd Natural numbers B. Natural Number C. Even Natural Number D. Square root of natural number

Last Answer : B. Natural Number

When a ring of metal is heated what happens to its hole ? (1) expands (2) contracts (3) it expands or contracts according to its diameter (4) it expands or contracts according to its coefficient of expansion

Description : When a ring of metal is heated what happens to its hole ? (1) expands (2) contracts (3) it expands or contracts according to its diameter (4) it expands or contracts according to its coefficient of expansion

Last Answer : expands

The equivalent diameter for the annulus of a double pipe heat exchanger, whose inner pipe has fins on the outside is __________ compared to the same size pipes without fins. (A) More (B) Less (C) Same (D) Unpredictable

Description : The equivalent diameter for the annulus of a double pipe heat exchanger, whose inner pipe has fins on the outside is __________ compared to the same size pipes without fins. (A) More (B) Less (C) Same (D) Unpredictable

Last Answer : (B) Less

Find the area of an isosceles triangle, whose equal sides are of length 15 cm each and third side is 12 cm. -Maths 9th

Description : Find the area of an isosceles triangle, whose equal sides are of length 15 cm each and third side is 12 cm. -Maths 9th

Last Answer : We have, Three sides13cm,13cm and 20cm. By using Heron's formula We need to get the semi-perimeter s= 2 a+b+c​ = 2 13+13+20​ = 2 46​ =23 Now, put the heron's formula, s= s(s−a)(s−b)(s−c)​ = 23(23−13)(23−13)(23−20)​ = 23×10×10×3​ =10 23×3​ =83.07cm 2

The cross sections of the beams of equal length are a circle and a square whose permissible bending stress is same under same maximum bending. The ratio of their flexural weights is, (A) 1.118 (B) 1.338 (C) 1.228 (D) 1.108

Description : The cross sections of the beams of equal length are a circle and a square whose permissible bending stress is same under same maximum bending. The ratio of their flexural weights is, (A) 1.118 (B) 1.338 (C) 1.228 (D) 1.108

Last Answer : (A) 1.118

Which of the following statement is wrong? (A) A flow whose streamline is represented by a curve is called two dimensional flow. (B) The total energy of a liquid particle is the sum of potential energy, kinetic energy and pressure energy. (C) The length of divergent portion in a Venturimeter is equal to the convergent portion. (D) A pitot tube is used to measure the velocity of flow at the required point in a pipe.

Description : Which of the following statement is wrong? (A) A flow whose streamline is represented by a curve is called two dimensional flow. (B) The total energy of a liquid particle is the sum of potential energy, ... (D) A pitot tube is used to measure the velocity of flow at the required point in a pipe.

Last Answer : Answer: Option C

Area of a rectangle is equal to the area of circle whose radius is 14 cms. If the breadth of the rectangle is 22 cms. What is its length? a) 27 cms b) 28 cms c) 25 cms. d) 29 cms e) None of these

Description : Area of a rectangle is equal to the area of circle whose radius is 14 cms. If the breadth of the rectangle is 22 cms. What is its length? a) 27 cms b) 28 cms c) 25 cms. d) 29 cms e) None of these

Last Answer : According to question, l×b = ¶r2 l ×22 = 22/7 ×14 × 14 l = 22/7 ×14 × 14/22 cms = 28 cms. Answer: b)

A tube mill as compared to a ball mill (A) Employs smaller balls (B) Gives finer size reduction but consumes more power (C) Has larger length/diameter ratio (>2 as compared to 1 for ball mill) (D) All (A), (B) and (C)

Description : A tube mill as compared to a ball mill (A) Employs smaller balls (B) Gives finer size reduction but consumes more power (C) Has larger length/diameter ratio (>2 as compared to 1 for ball mill) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Rod mills employed for grinding (A) Employ a steel shell having L/D ratio of 1.5 to 3.0 (B) Is useful for handling sticky materials (C) Employ steel rods of 2-12 cms diameter extending over full length of the mill (D) All 'a', 'b' & 'c'

Description : Rod mills employed for grinding (A) Employ a steel shell having L/D ratio of 1.5 to 3.0 (B) Is useful for handling sticky materials (C) Employ steel rods of 2-12 cms diameter extending over full length of the mill (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

The main differentiation factor between tube mill and ball mill is the (A) Length to diameter ratio (B) Size of the grinding media (C) Final product size (D) Operating speed

Description : The main differentiation factor between tube mill and ball mill is the (A) Length to diameter ratio (B) Size of the grinding media (C) Final product size (D) Operating speed

Last Answer : (A) Length to diameter ratio

Pick out the wrong statement pertaining to the turbine agitator. (A) Recommended peripheral speed for the turbine agitator is 200-250 metres/minute (B) Pitched blade turbine agitator gives only radial flow with complete absence of the axial flow (C) Generally, the diameter of the agitator is kept between l/3rd to l/6th of the tank diameter while the blade length is l/4th of agitator diameter (with central disc, it is l/8th of the agitator diameter)

Description : Pick out the wrong statement pertaining to the turbine agitator. (A) Recommended peripheral speed for the turbine agitator is 200-250 metres/minute (B) Pitched blade turbine agitator gives only radial flow with ... l/4th of agitator diameter (with central disc, it is l/8th of the agitator diameter)

Last Answer : (B) Pitched blade turbine agitator gives only radial flow with complete absence of the axial flow

A tube mill compared to a ball mill (A) Has a higher length/diameter ratio(B) Produces a coarser product(C) Has a higher diameter/length ratio(D) Uses much larger balls

Description : A tube mill compared to a ball mill (A) Has a higher length/diameter ratio (B) Produces a coarser product (C) Has a higher diameter/length ratio (D) Uses much larger balls

Last Answer : (A) Has a higher length/diameter ratio

Length/diameter ratio of a ball mill is (A) 1.5 (B) 1 (C) < 1 (D) > 1

Description : Length/diameter ratio of a ball mill is (A) 1.5 (B) 1 (C) < 1 (D) > 1

Last Answer : (C) < 1

For specified tube outside diameter, higher BWG means higher (A) Tube thickness (B) Cross-sectional area (C) Weight per unit length (D) None of these

Description : For specified tube outside diameter, higher BWG means higher (A) Tube thickness (B) Cross-sectional area (C) Weight per unit length (D) None of these

Last Answer : (B) Cross-sectional area

Convective heat transfer co-efficient in case of fluid flowing in tubes is not affected by the tube length/diameter ratio, if the flow is in the __________ zone. (A) Laminar (B) Transition (C) Both 'a' & 'b' (D) Highly turbulent

Description : Convective heat transfer co-efficient in case of fluid flowing in tubes is not affected by the tube length/diameter ratio, if the flow is in the __________ zone. (A) Laminar (B) Transition (C) Both 'a' & 'b' (D) Highly turbulent

Last Answer : (D) Highly turbulent

Which of the following two quantities when same, makes one pipe system equivalent to another pipe system? (A) Head & discharge(B) Length & discharge(C) Length & diameter(D) Friction factor & diameter

Description : Which of the following two quantities when same, makes one pipe system equivalent to another pipe system? (A) Head & discharge (B) Length & discharge (C) Length & diameter (D) Friction factor & diameter

Last Answer : (A) Head & discharge

The discharge co-efficient for an orifice meter does not depend upon the (A) Pipe length (B) Ratio of pipe diameter to orifice diameter (C) Type of orifice & the Reynolds number (D) Pipe diameter

Description : The discharge co-efficient for an orifice meter does not depend upon the (A) Pipe length (B) Ratio of pipe diameter to orifice diameter (C) Type of orifice & the Reynolds number (D) Pipe diameter

Last Answer : (A) Pipe length