Diameter to height ratio for a raschig ring is (A) 1 (B) 0.5 (C) 2 (D) 8

Diameter to height ratio for a raschig ring is

(A) 1

(B) 0.5

(C) 2

(D) 8

by

1 Answer

Answer :

(A) 1

by

Related questions

Sphericity of raschig ring (whose length and diameter are equal) is (A) > 1 (B) < 1 (C) 1 (D) 2

Description : Sphericity of raschig ring (whose length and diameter are equal) is (A) > 1 (B) < 1 (C) 1 (D) 2

Last Answer : (C) 1

Diameter of raschig rings used in packed tower in industry is normally around __________ inches. (A) 2 (B) 8 (C) 12 (D) 18

Description : Diameter of raschig rings used in packed tower in industry is normally around __________ inches. (A) 2 (B) 8 (C) 12 (D) 18

Last Answer : (A) 2

Raschig ring made of porcelain cannot be used for treating concentrated (A) Hydrochloric acid (B) Nitric acid (C) Alkalis (D) Sulphuric acid

Description : Raschig ring made of porcelain cannot be used for treating concentrated (A) Hydrochloric acid (B) Nitric acid (C) Alkalis (D) Sulphuric acid

Last Answer : (C) Alkalis

Sphericity is the ratio of the surface area of a spherical particle having the same volume as the particle to the surface area of the particle. Which of the following has the maximum value of sphericity? (A) Sphere(B) Cube(C) Cylinder (L/D = 1)(D) Raschig rings

Description : Sphericity is the ratio of the surface area of a spherical particle having the same volume as the particle to the surface area of the particle. Which of the following has the maximum value of sphericity? (A) Sphere (B) Cube (C) Cylinder (L/D = 1) (D) Raschig rings

Last Answer : (A) Sphere

Pick out the correct statement. (A) Fanning friction factor is inversely proportional to Reynolds number always (B) The property of a randomly packed bed (with raschig rings) is given by the ratio of the total volume to the volume of voids in the bed (C) Mach number in an incompressible fluid is always unity (D) Mach number is given by the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Description : Pick out the correct statement. (A) Fanning friction factor is inversely proportional to Reynolds number always (B) The property of a randomly packed bed (with raschig rings) is given by the ratio of the ... the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Last Answer : (D) Mach number is given by the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

For raschig rings, the sphericity is (A) 0.5 (B) 1 (C) < 1

Description : For raschig rings, the sphericity is (A) 0.5 (B) 1 (C) < 1

Last Answer : (C) < 1

The most common packing used in industrial operations is __________ rings. (A) Raschig (B) Lessing (C) Cross-partition (D) Single spiral

Description : The most common packing used in industrial operations is __________ rings. (A) Raschig (B) Lessing (C) Cross-partition (D) Single spiral

Last Answer : (C) Cross-partition

Use of raschig rings in place of crushed stones as packing in packed beds (other things being same) (A) Increases pressure drop, increases surface area (B) Increases pressure drop, decreases surface area (C) Decreases pressure drop, increases surface area (D) Decreases pressure drop, decreases surface area

Description : Use of raschig rings in place of crushed stones as packing in packed beds (other things being same) (A) Increases pressure drop, increases surface area (B) Increases pressure drop, decreases ... (C) Decreases pressure drop, increases surface area (D) Decreases pressure drop, decreases surface area

Last Answer : (C) Decreases pressure drop, increases surface area

Which of the following ceramic packing materials is the costliest of all? (A) Berl saddles (B) Raschig rings (C) Pall rings (D) Intalox saddles

Description : Which of the following ceramic packing materials is the costliest of all? (A) Berl saddles (B) Raschig rings (C) Pall rings (D) Intalox saddles

Last Answer : Berl saddles

A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system (in SI units) is given below: Δ P/L = 375 × 10 3 VOM + 10.94 × 10 6 V2 OM (SI units) If water is to be used as the fluidising medium, in actual operation, the above bed has a height = 1 m. What is the porosity of the fluidised bed? (A) 0.2 (B) 0.5 (C) 0.7 (D) 0.8

Description : A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system ... What is the porosity of the fluidised bed? (A) 0.2 (B) 0.5 (C) 0.7 (D) 0.8

Last Answer : (C) 0.7

A cylindrical vessel of diameter 12 cm contains `800picm^(3)` of water. A cylindrical glass piece of diameter `8.0cm` and height ``8.0 cm is placed in

Description : A cylindrical vessel of diameter 12 cm contains `800picm^(3)` of water. A cylindrical glass piece of diameter `8.0cm` and height ``8.0 cm is placed in

Last Answer : A cylindrical vessel of diameter 12 cm contains `800picm^(3)` of water. A cylindrical glass piece of diameter ... is 1.50 and that of water is 1.33.

Find the ratio of the diameter of the circles inscribed in and circumscribing an equilateral triangle to its height? -Maths 9th

Description : Find the ratio of the diameter of the circles inscribed in and circumscribing an equilateral triangle to its height? -Maths 9th

Last Answer : (b) 2 : 4 : 3.For an equilateral triangle of side a units,In-radius = \(rac{a}{2\sqrt3}\) units⇒ Diameter of inscribed circle = \(rac{a}{\sqrt3}\) unitsCircumradius = \(rac{a}{\sqrt3}\)⇒ Diameter of circumscrible circle = \( ... \(rac{2a}{\sqrt3}\): \(rac{\sqrt3}{2}a\) = 2a : 4a : 3a = 2 : 4 : 3.

Sphericity of a cubical particle, when its equivalent diameter is taken as the height of the cube, is (A) 0.5 (B) 1 (C) √2 (D) √3

Description : Sphericity of a cubical particle, when its equivalent diameter is taken as the height of the cube, is (A) 0.5 (B) 1 (C) √2 (D) √3

Last Answer : (B) 1

Height of liquid in agitation tank is normally maintained equal to the tank diameter. However, if the tank is too tall and a large liquid hold up is desired, then two or more impellers mounted on the same shaft may be used. The clearance between the tank bottom and the bottom most impeller should be about (where, D = impeller diameter) (A) 0.5 D (B) D (C) 1.5 D (D) 2 D

Description : Height of liquid in agitation tank is normally maintained equal to the tank diameter. However, if the tank is too tall and a large liquid hold up is desired, then two or more impellers mounted on the same shaft may be used. The ... where, D = impeller diameter) (A) 0.5 D (B) D (C) 1.5 D (D) 2 D

Last Answer : (B) D

In Newton's ring experiment, the diameter of the 15 th ring was found to be 0.590 and that of the 5 th ring was 0.336 cm. If the radius of Plano convex lens is 100 cm, compute the wavelength of light used. A. 5885 A 0 B. 5880 A o C. 5890 A o D.5850 A

Description : In Newton's ring experiment, the diameter of the 15 th ring was found to be 0.590 and that of the 5 th ring was 0.336 cm. If the radius of Plano convex lens is 100 cm, compute the wavelength of light used. A. 5885 A 0 B. 5880 A o C. 5890 A o D.5850 A

Last Answer : B. 5880 A o

Packed column distillation is limited to the column __________ metres. (A) Height < 6 (B) Diameter < 0.6 (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Packed column distillation is limited to the column __________ metres. (A) Height < 6 (B) Diameter < 0.6 (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

In a shell and tube heat exchanger, the height of 25 percent cut baffles is equal to (where, D = inside diameter of shell). (A) 0.25 D (B) 0.50 D (C) 0.75 D

Description : In a shell and tube heat exchanger, the height of 25 percent cut baffles is equal to (where, D = inside diameter of shell). (A) 0.25 D (B) 0.50 D (C) 0.75 D

Last Answer : (C) 0.75 D

A snack bar sells popcorn and cone shaped containers. One container has a diameter of 8 inches and a height of 10 inches. How many cubic inches of popcorn does the container hold (Rounded to the nearest tenth)?

Description : A snack bar sells popcorn and cone shaped containers. One container has a diameter of 8 inches and a height of 10 inches. How many cubic inches of popcorn does the container hold (Rounded to the nearest tenth)?

Last Answer : In coned shape containers*

In a moderately sized packed absorption tower, channelling (which is most severe with stacked packings) can be minimised by taking the ratio of tower diameter to packing diameter (A) > 4 :1 (B) < 8 : 1 (C) > 8:1 (D) < 6:1

Description : In a moderately sized packed absorption tower, channelling (which is most severe with stacked packings) can be minimised by taking the ratio of tower diameter to packing diameter (A) > 4 :1 (B) < 8 : 1 (C) > 8:1 (D) < 6:1

Last Answer : (C) > 8:1

A cylindrical ejector having its height 2 m fills after every 10 minutes with a peak sewage discharge of 0.0157 cumec. The diameter of the ejector chamber, is A. 2.30 m B. 2.40 m C. 2.45 m D. 2.50 m

Description : A cylindrical ejector having its height 2 m fills after every 10 minutes with a peak sewage discharge of 0.0157 cumec. The diameter of the ejector chamber, is A. 2.30 m B. 2.40 m C. 2.45 m D. 2.50 m

Last Answer : ANS: C

Pick out the correct statement.(A) Angle of repose is always greater than the angle of slide (B) A hopper is a small bin with a sloping bottom (C) A silo is a short height vessel of very large diameter used for the storage of high volatile matter coal (D) Pine oil is used as a 'modifying agent' (for activating or depressing the adsorption of filming agents) in froth floatation process

Description : Pick out the correct statement. (A) Angle of repose is always greater than the angle of slide (B) A hopper is a small bin with a sloping bottom (C) A silo is a short height ... used as a 'modifying agent' (for activating or depressing the adsorption of filming agents) in froth floatation process

Last Answer : (B) A hopper is a small bin with a sloping bottom

Which of the following same diameter columns gives lowest pressure drop per unit height? (A) Bubble-cap column (B) Sieve-plate column (C) Packed column (stacked)

Description : Which of the following same diameter columns gives lowest pressure drop per unit height? (A) Bubble-cap column (B) Sieve-plate column (C) Packed column (stacked)

Last Answer : (C) Packed column (stacked)

The most important factor, which determines the maximum height to which water can be lifted by a pump at standard temperature is the (A) Barometric pressure (B) Speed of the impeller (C) Diameter of the impeller (D) Both (B) and (C)

Description : The most important factor, which determines the maximum height to which water can be lifted by a pump at standard temperature is the (A) Barometric pressure (B) Speed of the impeller (C) Diameter of the impeller (D) Both (B) and (C)

Last Answer : (A) Barometric pressure

The equivalent diameter for flow through a rectangular duct of width B and height H is (A) HB/2 (H + B) (B) HB/(H + B) (C) 2HB/(H + B) (D) 4HB/(H + B)

Description : The equivalent diameter for flow through a rectangular duct of width B and height H is (A) HB/2 (H + B) (B) HB/(H + B) (C) 2HB/(H + B) (D) 4HB/(H + B)

Last Answer : (C) 2HB/(H + B)

Dust collection efficiency of a cyclone separator depends upon its (A) Diameter (B) Inlet gas velocity (C) Overall height (D) All (A), (B) & (C)

Description : Dust collection efficiency of a cyclone separator depends upon its (A) Diameter (B) Inlet gas velocity (C) Overall height (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Rod mills employed for grinding (A) Employ a steel shell having L/D ratio of 1.5 to 3.0 (B) Is useful for handling sticky materials (C) Employ steel rods of 2-12 cms diameter extending over full length of the mill (D) All 'a', 'b' & 'c'

Description : Rod mills employed for grinding (A) Employ a steel shell having L/D ratio of 1.5 to 3.0 (B) Is useful for handling sticky materials (C) Employ steel rods of 2-12 cms diameter extending over full length of the mill (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

When a ring of metal is heated what happens to its hole? (1) expands (2) contracts (3) it expands or contracts according to its diameter (4) it expands or contracts according to its coefficient of expansion

Description : When a ring of metal is heated what happens to its hole? (1) expands (2) contracts (3) it expands or contracts according to its diameter (4) it expands or contracts according to its coefficient of expansion

Last Answer : (1) expands Explanation: The hole size will increase because in expansion the size between two molecules, do not increase so when the molecules on the outer edge move outward. Due to expansion, the ... expansion is the tendency of matter to change in volume in response to a change in temperature.

In Newton's Ring experiments , the diameter of dark rings is proportional to A. Odd Natural numbers B. Natural Number C. Even Natural Number D. Square root of natural number

Description : In Newton's Ring experiments , the diameter of dark rings is proportional to A. Odd Natural numbers B. Natural Number C. Even Natural Number D. Square root of natural number

Last Answer : In Newton's Ring experiments , the diameter of dark rings is proportional to A. Odd Natural numbers B. Natural Number C. Even Natural Number D. Square root of natural number

n Newton's Ring experiments , the diameter of bright rings is proportional to A. Square root of Odd Natural numbers B. Natural Number C. Even Natural Number D. Square root of natural number

Description : n Newton's Ring experiments , the diameter of bright rings is proportional to A. Square root of Odd Natural numbers B. Natural Number C. Even Natural Number D. Square root of natural number

Last Answer : B. Natural Number

When a ring of metal is heated what happens to its hole ? (1) expands (2) contracts (3) it expands or contracts according to its diameter (4) it expands or contracts according to its coefficient of expansion

Description : When a ring of metal is heated what happens to its hole ? (1) expands (2) contracts (3) it expands or contracts according to its diameter (4) it expands or contracts according to its coefficient of expansion

Last Answer : expands

The ratio of the hydraulic radius to the diameter of the channel, for maximum mean velocity of flow in a circular channel, in open channel flow is (A) 0.3 (B) 0.9 (C) 0.03 (D) 0.66

Description : The ratio of the hydraulic radius to the diameter of the channel, for maximum mean velocity of flow in a circular channel, in open channel flow is (A) 0.3 (B) 0.9 (C) 0.03 (D) 0.66

Last Answer : (A) 0.3

The ratio of the depth of flow to the diameter of the channel for maximum discharge in a circular channel in open channel flow is (A) 0.1 (B) 0.55(C) 0.95 (D) 1.85

Description : The ratio of the depth of flow to the diameter of the channel for maximum discharge in a circular channel in open channel flow is (A) 0.1 (B) 0.55 (C) 0.95 (D) 1.85

Last Answer : (C) 0.95

The ratio of the diameter of reinforcing bars and the slab thickness is (A) 1/4 (B) 1/5 (C) 1/6 (D) 1/8

Description : The ratio of the diameter of reinforcing bars and the slab thickness is (A) 1/4 (B) 1/5 (C) 1/6 (D) 1/8

Last Answer : (D) 1/8

A cylindrical pillar is 50 cm in diameter and 3.5 m in height. Find the cost of painting the curved surface of the pillar at the rate of ₹12.50 per m2 . -Maths 9th

Description : A cylindrical pillar is 50 cm in diameter and 3.5 m in height. Find the cost of painting the curved surface of the pillar at the rate of ₹12.50 per m2 . -Maths 9th

Last Answer : Diameter of the pillar = 50 cm ∴ Radius (r) = 502m = 25 m = 14m and height (h) = 3.5m Curved surface area of a pillar = 2πrh ∴ Curved surface area to be painted = 112m2 ∴ Cost of painting of 1 m2 pillar = Rs. 12.50 ∴ Cost of painting of 112 m2 pillar = Rs. ( 112 x 12.50 ) = Rs. 68.75.

he frame has a base diameter of 20 cm and height of 30 cm. A margin of 2.5 cm is to be given for folding it over the top and bottom of the frame. -Maths 9th

Description : he frame has a base diameter of 20 cm and height of 30 cm. A margin of 2.5 cm is to be given for folding it over the top and bottom of the frame. -Maths 9th

Last Answer : Say h = height of the frame of lampshade, looks like cylindrical shape r = radius Total height is h = (2.5+30+2.5) cm = 35cm and r = (20/2) cm = 10cm Use curved surface area formula to find the ... 2πrh = (2 (22/7) 10 35) cm2 = 2200 cm2 Hence, 2200 cm2 cloth is required for covering the lampshade.

Diameter of the base of a cone is 10.5 cm and its slant height is 10 cm. Find its curved surface area -Maths 9th

Description : Diameter of the base of a cone is 10.5 cm and its slant height is 10 cm. Find its curved surface area -Maths 9th

Last Answer : Radius of the base of cone = diameter/ 2 = (10.5/2)cm = 5.25cm Slant height of cone, say l = 10 cm CSA of cone is = πrl = (22/7)×5.25×10 = 165

A heap of wheat is in the form of a cone whose diameter is 10.5 m and height is 3 m. -Maths 9th

Description : A heap of wheat is in the form of a cone whose diameter is 10.5 m and height is 3 m. -Maths 9th

Last Answer : Diameter of cone = 10.5 m Radius of cone (r) = 5.25 m Height of cone (h) = 3 m Volume of cone = 1 / 3 πr2h = 1 / 3 × 22 / 7 × 5.25 × 5.25 × 3 = 86.625m3 Cost of 1m3 of wheat = 10 ∴ Cost of 86.625 m3 of wheat = 10 × 86.625 = 86.625

A heap of wheat is in the form of a cone whose diameter is 10.5 m and height is 3 m. -Maths 9th

Description : A heap of wheat is in the form of a cone whose diameter is 10.5 m and height is 3 m. -Maths 9th

Last Answer : Diameter of cone = 10.5 m Radius of cone (r) = 5.25 m Height of cone (h) = 3 m Volume of cone = 1 / 3 πr2h = 1 / 3 × 22 / 7 × 5.25 × 5.25 × 3 = 86.625m3 Cost of 1m3 of wheat = 10 ∴ Cost of 86.625 m3 of wheat = 10 × 86.625 = 86.625

In a single threaded worm and worm wheel the number of teeth on the worm wheel is 60. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be a.90 b.120 c.60 d.45 e.107 dynes

Description : In a single threaded worm and worm wheel the number of teeth on the worm wheel is 60. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be a.90 b.120 c.60 d.45 e.107 dynes

Last Answer : a. 90

In a single threaded worm and worm wheel the number of teeth on the worm wheel is 80. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be a.60 b.45 c.120 d.107 dynes e.90

Description : In a single threaded worm and worm wheel the number of teeth on the worm wheel is 80. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be a.60 b.45 c.120 d.107 dynes e.90

Last Answer : c. 120

The length to diameter ratio for a square bearing is (A) More than 1 (B) Less than 1 (C) 8 (D) 1

Description : The length to diameter ratio for a square bearing is (A) More than 1 (B) Less than 1 (C) 8 (D) 1

Last Answer : (D) 1

The length to diameter ratio for a short bearing is (A) More than 1 (B) Less than 1 (C) 8

Description : The length to diameter ratio for a short bearing is (A) More than 1 (B) Less than 1 (C) 8

Last Answer : (B) Less than 1

The ratio of the length and diameter of a simply supported uniform circular beam which experiences maximum bending stress equal to tensile stress due to same load at its mid span, is (A) 1/8 (B) 1/4 (C) 1/2 (D) 1/3

Description : The ratio of the length and diameter of a simply supported uniform circular beam which  experiences maximum bending stress equal to tensile stress due to same load at its mid span, is  (A) 1/8  (B) 1/4  (C) 1/2  (D) 1/3 

Last Answer : (C) 1/2 

The ratio of the section modulus of a square section of side B and that of a circular section of diameter D, is (A) 2 /15 (B) 3 /16 (C) 3 /8 (D) /16

Description : The ratio of the section modulus of a square section of side B and that of a circular section of  diameter D, is  (A) 2 /15  (B) 3 /16  (C) 3 /8  (D) /16

Last Answer : (B) 3 /16 

In order to avoid tendency of separation at throat in a Venturimeter, the ratio of the diameter at throat to the diameter of pipe should be (A) 1/16 to 1/8 (B) 1/8 to 1/4 (C) 1/4 to 1/3 (D) 1/3 to 1/2

Description : In order to avoid tendency of separation at throat in a Venturimeter, the ratio of the diameter at throat to the diameter of pipe should be (A) 1/16 to 1/8 (B) 1/8 to 1/4 (C) 1/4 to 1/3 (D) 1/3 to 1/2

Last Answer : Answer: Option D

The ratio of strength of a hollow shaft to that of a solid shaft subjected to torsion if both are of the same material and of the same outer diameters, the inner diameter of hollow shaft being half of the outer diameter is a. 15/16 b. 16/15 c. 7/8 d. 8/7

Description : The ratio of strength of a hollow shaft to that of a solid shaft subjected to torsion if both are of the same material and of the same outer diameters, the inner diameter of hollow shaft being half of the outer diameter is a. 15/16 b. 16/15 c. 7/8 d. 8/7

Last Answer : a. 15/16

A 3.2 m diameter balloon is filled with Helium. The total weight of balloon, gas and pay load is 10 kg kg. In an isothermal atmosphere having conditions identical to N.T.P. the balloon will rise to a height of about a.6000 m b.1500 m c.3000 m d.2000 m e.1000 m

Description : A 3.2 m diameter balloon is filled with Helium. The total weight of balloon, gas and pay load is 10 kg kg. In an isothermal atmosphere having conditions identical to N.T.P. the balloon will rise to a height of about a.6000 m b.1500 m c.3000 m d.2000 m e.1000 m

Last Answer : a. 6000 m

A bus stop is barricaded from the remaining part of the road, by using 50 hollow cones made of recycled cardboard. Each cone has a base diameter of 40 cm and height 1 m. -Maths 9th

Description : A bus stop is barricaded from the remaining part of the road, by using 50 hollow cones made of recycled cardboard. Each cone has a base diameter of 40 cm and height 1 m. -Maths 9th

Last Answer : Given: Radius of cone, r = diameter/2 = 40/2 cm = 20cm = 0.2 m Height of cone, h = 1m Slant height of cone is l, and l2 = (r2+h2) Using given values, l2 = (0.22+12) = (1.04) Or l ... (32.028 12) = Rs.384.336 = Rs.384.34 (approximately) Therefore, the cost of painting all these cones is Rs. 384.34.

The slant height and base diameter of conical tomb are 25m and 14 m respectively. Find the cost of white-washing its curved surface at the rate of Rs. 210 per 100 m2 -Maths 9th

Description : The slant height and base diameter of conical tomb are 25m and 14 m respectively. Find the cost of white-washing its curved surface at the rate of Rs. 210 per 100 m2 -Maths 9th

Last Answer : Slant height of conical tomb, l = 25m Base radius, r = diameter/2 = 14/2 m = 7m CSA of conical tomb = πrl = (22/7)×7×25 = 550 CSA of conical tomb= 550m2 Cost of white-washing 550 m2 area, which is Rs (210×550)/100 = Rs. 1155 Therefore, cost will be Rs. 1155 while white-washing tomb.